Critical behavior of electrical resistivity in polar + nonpolar binary liquid systems

The behavior of electrical resistivity in the critical region of three polar + nonpolar binary liquid systems CS2 +(CH3CO)2O, C6H12+(CH3CO)2O, and n‐C7H16+(CH3CO)2O is studied. For the mixtures with critical composition, the two phase region shows a conductivity behavior with σ1−σ2∼ (−ϵ)β with β?0.35. In the one phase region dR/dT has a singularity ϵ−b with b?0.35. A possible theory of the impurity conduction is given, which broadly explains these results. The possibility of dR/dT being positive or negative is also discussed.

X-ray diffraction from single Al6CuLi3 grains showing five-fold symmetry

We present here the detailed results of X-ray diffraction from single quasicrystals of Al6CuLi3. X-ray precession photographs taken down the two-, three- and five-fold axes along with rotation and zero-level Weissenberg photographs are shown. Preliminary analysis of the diffraction data rules out the twin hypothesis.

Dispersion of resistivity anomalies in critical binary liquid systems

The critical resistivity in the binary liquid systems n-C7H16 + CH3OH and CS2 + CH3NO2 is measured from 10 Hz to 100 kHz. There is no noticeable effect of the frequency on the resistivity singularities. Thus any contribution from dielectric dispersion is not appreciable.

Elastic properties of PbS-As2S3 glasses

The temperature dependence of the longitudinal and shear ultrasound wave velocities in (As2S3)1-x(PbS)x glasses has been determined from 77 to 300K using a pulse echo interferometer. Elastic constants of the prepared glasses at room temperature have been computed from the experimental data. Both longitudinal and shear ultrasound wave velocities in these glasses show a linear temperature dependence with a negative temperature coefficient.

Mechanical and Chemical Thresholds in IV-VI Chalcogenide Glasses

It has been possible to identify two critical compositions in the IV-VI chalcogenide glassy system GexSe100-x by the anomalous variations of the high-pressure electrical resistivity behavior. The first critical composition, the chemical threshold, refers to the stoichiometric composition. The second critical composition, identified recently as the mechanical percolation threshold, is connected with the structural rigidity of the material.

Ionic conductivity and dielectric measurements in single crystal β---AgI

Ionic conductivity measurements have been made on pure, copper-doped and cadmium-doped single crystals. Dielectric measurements in the frequency range 30Hz–100Hz showed that there was no anomalously to be (0.64 ± 0.02) eV and migration energies for silver ion intersitials and vacancies in the c direction to be (0.41 ± 0.02) eV and (0.50 ± 0.02) eV respectively. ESR measurements have shown that copper exists as Cu+ in these crystals. Dielectric measurements in the frequency range (OHz–100KHz showed that there was no anomalously high value for ε as reported earlier.

Non-periodic tilings in 2-dimensions: 4- and 7-fold symmetries

By inflating basic rhombuses, with a self-similarity principle, non-periodic tiling of 2-d planes is possible with 4, 5, 6, 7, 8, … -fold symmetries. As examples, non-periodic tilings with crystallographically allowed 4-fold symmetry and crystallographically forbidden 7-fold symmetry are presented in detail. The computed diffraction patterns of these tilings are also discussed.

Hammasröntgentutkimusten termoluminesenssidosimetria

Tavanomaisten hammasröntgenlaitteiden säteilyannoksia valvotaan postitettavien testipakettien ja paikan päällä tehtävien tarkastusten avulla. Säteilyannoksen valvontaan käytetään termoluminesenssidosimetrejä (Thermoluminescence Dosimetry, TLD). Dosimetreissä on TL-materiaalista valmistettuja loistekiteitä, joihin absorboitunut säteilyenergia vapautuu valona materiaalia lämmitettäessä. Prosessissa vapautuvan valon intensiteetti on suoraan verrannollinen absorboituneeseen säteilyannokseen. TLD:llä mitataan rekisteröityjen intraoraalilaitteiden tuottamaa säteilyannosta potilaan posken kohdalla. Säteilyturvakeskus (STUK) ylläpitää rekisteriä ilmoitusvelvollisuuden alaisista hammasröntgenlaitteista. Nyt hammaslaiterekisteriä ollaan uudistamassa siten, että TLD-mittaustulosten käsittely ja annoslaskenta siirtyvät rekisteristä WinTLD-laskentaohjelmaan, jossa on kaikki tarvittavat parametrit annoksen laskemiseksi. Tässä työssä TLD-mittausjärjestelmän kalibrointituloksia analysoitiin vuosilta 1996-2011 ja määritettiin uudelleen laskennassa käytetty energiakorjauskerroin, joka on osa tulevaa WinTLD-konfigurointia. Mittauksissa tarvittavat standardisäteilylaadut (ISO H-laadut) pystytettiin osana työtä. Henkilödosimetrien suorituskykytestauksessa käytetään ISO N-säteilylaatuja. Mirion Technologies (RADOS) käyttää TLD-systeemiä henkilödosimetriassa, ja hammas-TLD on tämän järjestelmän sovellus potilasdosimetriaan. ISO H-laadut otettiin käyttöön, jotta dosimetrien vastetta voitiin ISO N-laatujen tapaan tutkia jatkuvana fotonienergian funktiona Cs-137 ja Co-60 gammasäteilylaatuihin asti ja koska niillä voitiin jäljitellä todellista kliinistä suodatusta. Energiakorjauskerroin kalibroinnissa käytettävän Co-gammasäteilyn ja intraoraalikuvauksissa käytettävän röntgensäteilyn välillä määritettiin uudelleen. Sen arvoksi (yksikkö mGy/mGy) saatiin ISO N-60-laadulla 0,671 ja ISO H-60-laadulla 0,677, jotka ovat numeerisesti hyvin lähellä aikaisemmin määritettyä kerrointa 0,679. Energiakorjauskertoimen epävarmuudeksi saatiin 3,5 % (2std) ja annosmittauksen epävarmuudeksi 7,8 %. Energiavasteiden perusteella dosimetreissä käytetty materiaali on kahdesta vaihtoehdosta MTS-N (LiF:Mg,Ti) eikä MCP-N (LiF:Mg,Cu,P). TLD-järjestelmää voidaan kehittää ja konfiguroida uusien tulosten perusteella, jolloin otetaan käyttöön muun muassa uudelleenmääritetty energiakorjauskerroin. ISO H-säteilylaadut otettiin 22.3.2011 virallisesti käyttöön STUKissa ja niitä käytetään dosimetritestauksessa tarvittaessa suuria annosnopeuksia ja annoksia.

Electrophilic Substitution Reactions of Copper(II) Acetylacetoneimine Complexes with Arene Diazonium Ions

Copper(II) complexes of ethylene/propylene-bis(acetylacetoneimine), Cu(baen) or Cu(bapn), react quickly and quantitatively in aqueous methanol at the methine position with arene diazonium ions in a stepwise manner to yield mono- and di-substituted copper(II) complexes. All the complexes are paramagnetic with μeff∼1.88 B.M. In all the complexes the diazo substituted part of the ligand coordinates to the metal through the agr-nitrogen of the azo group and the imine nitrogen, forming glyoxaliminearylhydrazone type of ligand system. The complexes have been characterized by elemental analysis, electronic, esr, ir and mass spectroscopic methods.

Anisotropic properties of the layered semiconductor in Te

Anisotropic properties of the Bridgman grown layered semiconductor p-InTe were studied by analyzing the temperature dependence of electrical conductivity and Hall mobility parallel and perpendicular to the layer planes. The mobilities were μamalgamation or coproduct = 50–60 cm2V−1 sec−1 and μperpendicular = 10–15 cm2V−1sec−1 and varied as μ ≈ Tn where n = 1.43 due to impurity scattering. Pressure-induced semiconductor-metal transition occurred at about 50 kbar. The pressure coefficient of resistance was 3 times larger in the direction perpendicular to the layer plane due to the difference between inter and intra-planar bonding.

Investigations of the Nature of Critical Line Very Close to a Double Critical Point

The curvature of the line of critical points in a reentrant ternary mixture is determined by approaching the double critical point (DCP) extremely closely. The results establish the continuous and quadratic nature of this line. Out study encompasses as small a loop size (ΔT) as 663 mK. The DCP is realized when ΔT becomes zero.

Measurement of the corrosion rate of aluminium in sodium hydroxide using holographic interferometry

The application of holographic interferometry to the measurement of the corrosion rate of aluminium in sodium hydroxide is investigated. Details of the fabrication of the corrosion cell and the experimental procedure are given. Thickness loss of aluminium was found for different dissolution times and compared with the conventional weight-loss method using a microbalance.