Experimental and theoretical study of the ferroelectric and piezoelectric behavior of strontium-doped PZT

Theoretical data using ab initio perturbed ion calculation were compared with ferroelectric and piezoelectric experimental data of strontium doped PZT. Various concentrations of SrO in PZT at constant temperature and sintering time were carried out. Experimental results, such as the remanent polarization, P-R of 6.9-8.9 muC/Cm-2, the coercive field, E-C of 6.6-7.8 kVcm, and the planar coupling factor, Kp of 0.45-0.53, were compared with the energy of Zr4+ and Ti4+ ion dislocation and the lattice interaction energy which show that strontium increment in PZT alter the energies and increase the values of piezoelectric and ferroelectric variables. Calculations of lattice energy of the rhombohedral phase show that a phase non-stability is coincident with increasing experimental values of the P-R, E-C and Kp. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Referring to judo's sports injuries in São Paulo State Championship

Objective. - In a pioneer way, we investigated the morbidity of sports injuries referred by judo athletes from São Paulo State Championship.Material and methods. - Data collection from 93 senior judokas in State of São Paulo Judo Championship, through Referred Morbidity Inquiry about last year.Results. - One hundred and ten events were registered with a distribution frequency gradient of sprain > contusion > strain > ligament injury > partial and total dislocation. The most injured body areas were: knee (26.3%), shoulder (21.8%), fingers (17.3%), and ankle (10.0%). The most risky situation was when the athlete was training (standing, applying a blow) and it can be explained by the frequent and unprepared exposition of the athletes. Yearly lesion rate was 1.18 injuries per athlete/year.Conclusion. - Sprains constitute the most common judo injury, and athletes are more susceptible when they apply blows; discussion about the direction that the prevention should be applied remains opened. (c) 2006 Elsevier Masson SAS. All rights reserved.

Changes of microstructure in alpha AgZn during post-deformation annealing after cold-rolling

The annealing processes of deformation-induced defects after cold-rolling to about 30 and 60% thickness reduction were investigated for Ag-21, 23, 28 at% Zn by means of residual electrical resistivity, microhardness, light microscopy and transmission electron microscopy (TEM) Three annealing stages have been detected and consistently interpreted as annealing-out of mainly point defects and their agglomerates (stage I), formation of dislocation cells and recrystallized strain-free grains (stage II) and grain growth (stage III). Further, it is tried to determine the evolution of defect production (point defects and dislocations) during rolling deformation from measured changes of electrical resistivity and microhardness. Copyright (C) 1996 Acta Metallurgica Inc.

Rheological Characterization of Hydrophylic Gels

Rheological characteristics of gels were studied, with the focus on their use as a cosmetic base. Some ideal characteristics can be predicted by the rheological characterization, such as the performance, with easy application and without dripping or forming lumps and bubbles. Moreover, it is possible to detect signs of physical instability. The gels were prepared with sodium carboxymethyl cellulose 3% and 5%, with Carbopol 940 (INCI: Carbomer) and with Carbopol Ultrez (INCI: Acrylates/C10-30 alkyl acrylate crosspolymer). The tests performed were yield stress, stress sweep and creep and recovery. The gel with 3% of sodium carboxymethyl cellulose presented the most appropriated behavior and can be indicated as the most suitable cosmetic base.

Alveolar process preservation at implants installed immediately into extraction sockets using deproteinized bovine bone mineral - an experimental study in dogs

Aim To evaluate the soft tissue and the dimensional changes of the alveolar bony crest at sites where deproteinized bovine bone mineral (DBBM) particles, concomitantly with the placement of a collagen membrane, were used at implants installed into sockets immediately after tooth extraction. Material and methods The pulp tissue of the mesial roots of 3P3 was removed in six Labrador dogs, and the root canals were filled. Flaps were elevated bilaterally, the premolars hemi-sectioned, and the distal roots removed. Recipient sites were prepared in the distal alveolus, and implants were placed. At the test sites, DBBM particles were placed in the residual marginal defects concomitantly with the placement of a collagen membrane. No treatment augmentation was performed at the control sites. A non-submerged healing was allowed. Impressions were obtained at baseline and at the time of sacrifice performed 4 months after surgery. The cast models obtained were analyzed using an optical system to evaluate dimensional variations. Block sections of the implant sites were obtained for histological processing and soft tissue assessments. Results After 4 months of healing, no differences in soft tissue dimensions were found between the test and control sites based on the histological assessments. The location of the soft tissue at the buccal aspect was, however, more coronal at the test compared with the control sites (1.8 +/- 0.8 and 0.9 +/- 0.8 mm, respectively). At the three-dimensional evaluation, the margin of the soft tissues at the buccal aspect appeared to be located more apically and lingually. The vertical dislocation was 1 +/- 0.6 and 2.7 +/- 0.5 mm at the test and control sites, respectively. The area of the buccal shrinkage of the alveolar crest was significantly smaller at the test sites (5.9 +/- 2.4 mm2) compared with the control sites (11.5 +/- 1.7 mm2). Conclusion The use of DBBM particles concomitantly with the application of a collagen membrane used at implants placed into sockets immediately after tooth extraction contributed to the preservation of the alveolar process.

Loss of space and dental arch length after the loss of the lower first primary molar: A longitudinal study

The premature loss of primary teeth may harm the normal occlusal development, although there are debates relating to the necessity of using space maintainer appliances. The aim of the study is to evaluate the changes in the dental arch perimeter and the space reduction after the premature loss of the lower first primary molar in the mixed dentition stage. The sample consists of 4 lower arch plaster models of 31 patients, within the period of pre-extraction, 6, 12 and 18 months after the lower first primary molar extraction. A reduction of space was noted with the cuspid dislocation and the permanent incisors moving toward the space of the extraction site. It was concluded that the lower first molar primary premature loss, during the mixed dentition, implicates an immediate placement of a space maintainer.

Mechanical behaviour of strain aged dual phase steels

Dual phase steels, characterised by good formability and excellent surface finish, are suitable for applications where processing involves cold deformation. In this context an investigation has been conducted into the cold deformation aging susceptibility of carbon steel API-5L-B and microalloyed steel API-5L-X52, both with dual phase microstructures. Changes in mechanical properties such as phase microhardness, ultimate tensile strength, and yield strength in both types of steel were observed at aging temperatures of 25, 80, and 150°C. This aging is associated with dislocation structures formed on ferrite grains in the vicinity of ferrite/martensite interfaces during intercritical treatments, which become preferential sites for solute atom diffusion. © 1999 IoM Communications Ltd.

Evolution of the viscoelastic properties of SnO2 colloidal suspensions during the sol-gel transition

This paper describes the effect of the concentration of electrolyte and pH on the kinetics of aggregation and gelation processes of SnO2 colloidal suspensions. Creep, creep-recovery, and oscillatory rheological experiments have been done in situ during aggregation and gelation. A phenomenological description of the structure of the colloidal system is given from the time evolution of rheological parameters. The dependence of the equilibrium steady-state shear compliance on the terminal region of clusters or aggregates seems to be a way to determine the beginning of interconnection of aggregates and the gel point. We propose that at this point the equilibrium steady-state compliance is a minimum. The steady-state viscosity determined from creep experiment can be fit with a power law with the extent of the transformation, giving critical exponent s = 0.7 ± 0.1. The value of the critical exponent Δ = 0.78 ± 0.05 was determined from oscillatory experiment. These results indicate that gelation of SnO2 colloidal suspension exhibits the typical scale expected from the scalar percolation theory. © 2000 Elsevier Science B.V. All rights reserved.

Arthrodesis tarsocrural or tarsometatarsal in 2 dogs using circular external skeletal fixator

An external fixation technique, using a circular fixator, to obtain arthrodesis was evaluated in 2 dogs with infected open lesions and soft tissue damage. In both cases, articular cartilage was curetted, and devitalized bone and necrotic soft tissue were removed. No bone graft was used. The wounds were maintained open and the dogs received postoperative antibiotic therapy. The arthrodesis site was compressed progressively as needed. Infection was eradicated and bony union was obtained in both dogs. It was concluded that the use of a circular fixator is an effective method to achieve arthrodesis.

Grãos ultrafinos por laminação a morno e recozimento intercrítico

Grain refinement of low carbon steel via the warm deformation of martensite during torsion testing was investigated. At the beginning of straining, laths with high dislocation density were observed. After large deformations, a ferrite matrix with grain size close to 1μm and dispersed cementite particles were attained.

Microstructure evolution during warm deformation of low carbon steel with dispersed cementite

The microstructure evolution and mechanical behavior during large strain of a 0.16%C-Mn steel has been investigated by warm torsion tests. These experiments were carried out at 685°C at equivalent strain rate of 0.1 s . The initial microstructure composed of a martensite matrix with uniformly dispersed fine cementite particles was attained by quenching and tempering. The microstructure evolution during tempering and straining was performed through interrupted tests. As the material was reheated to testing temperature, well-defined cell structure was created and subgrains within lath martensite were observed by TEM; strong recovery took place, decreasing the dislocation density. After 1 hour at the test temperature and without straining, EBSD technique showed the formation of new grains. The flow stress curves measured had a peculiar shape: rapid work hardening to a hump, followed by an extensive flow-softening region. 65% of the boundaries observed in the sample strained to ε = 1.0 were high angle grain boundaries. After straining to ε = 5.0, average ferrite grain size close to 1.5 μm was found, suggesting that dynamic recrystallization took place. Also, two sets of cementite particles were observed: large particles aligned with straining direction and smaller particles more uniformly dispersed. The fragmentation or grain subdivision that occurred during reheating and tempering time was essential for the formation of ultrafine grained microstructure.

Desempenho de cordeiros lactentes recebendo probióticos em comedouros privativos

The presente study was carried out to evaluate the performance of 40 lambs 7/8 Ile de France 1/8 Ideal (20 not castrated males and 20 females) raised with access to creep feeding, until get 17 kg of corporeal weight. The animals were divided in treatments, receiving isoproteic and isoenergetic diets, with diferent levels of probiotics (D1=0%, D2=0,8% e D3=12%). They were analysed in regart to born weight, weight at 30 days and weight gain at maternal independent (from 1th to 4th weeks) and maternal independent (from 5th to 8th week), the age of wean and daily weight gain. The average intake of dry matter by the lambs at D1, D2 and D3 was 0,27, 0,26 and 0,27 kg/day, respectively. On maternal dependent phase, there was no interaction and differences between diet and sex in the born weight (3.30 kg), weight at 30 days of age (11.79 kg) and in the average daily weight gain (0.28 kg). On maternal independent phase, there were no differences in the age of weam (53 days) and daily weight gain (0,26 kg) between diet and sex. It was concluded that probiotics inclusion in the diet of the suckling lambs (males not castrated and females) didn't improve their performance.

Mandible protrusion and decrease of TMJ sounds: An electrovibratographic examination

This study quantified by, electrovibratography, the amount of mandible protrusion required to decrease significantly temporomandibular joint (TMJ) vibratory energy as an aid in the diagnosis of the recapture of anteriorly displaced disk. Eighteen patients diagnosed as having anterior disk displacement with reduction and TMJ clicking were submitted to electrovibratographic examination at the first appointment and treated with a stabilizing appliance and anterior positioning appliance with 1 to 5 mm protrusion. Vibratory energy was checked in each of these positions. Baseline data were used as control. At the first appointment, the patients had vibrations with more elevated intensities at the middle and late phases of the mouth opening cycle. At only one clinical step, mandible protrusion was obtained with the anterior repositioning appliance, ranging from 1 to 5 mm protusion. At each new position, a new electrovibratographic exam was made. After the 5-mm mandibular projection, only 2 patients presented vibration, with means between 0.6 and 2.8 Hz. Data were analyzed statistically by ANOVA and Tukey's test (α=0.05). The outcomes of this study indicate that 3 mm is the minimum amount of mandible protrusion to significantly decrease the TMJ vibratory energy and to recapture the displaced articular disk.

Comportamento ingestivo de cordeiros em terminação a pasto

The objective of this study was to evaluate intake behavior of lambs in pasture systems: (1) lambs kept with their dams in ryegrass (Lolium multiflorum Lam.) without supplementation; (2) lambs kept with their dams in the same pasture but supplemented in creep feeding; (3) lambs kept with their dams in the same pasture but supplemented in creep grazing with white clover. Three evaluations of intake behavior were performed to check the activities carried out by animals (grazing, rumination, suckling and other activities). Grazing, rumination and other activities times were different (p < 0.05) for non-supplemented lambs. For these lambs, grazing and rumination times were longer than other activities time compared to other systems. Creep feeding reduced grazing time (p < 0.05), probably due to easy access and quality of concentrate. Lambs in creep grazing had reduced (p < 0.05) rumination time. Bite mass in creep grazing was higher (p < 0.05), probably due to easy harvesting of leaves by lambs. It was concluded that the production system affects feeding strategy of lambs and the preference for legumes suggests the use of creep grazing for finishing lambs.

Efeito da suplementação sobre a digestibilidade dos nutrientes e desempenho de bezerros lactentes mantidos em pastagens de Brachiaria brizantha

This study evaluated the effect of supplementation and the type of supplement on nutrient digestibility and performance of lactating calves fed with Brachiara brizantha cv. Marandu pasture from February to May. The treatments were: supplementation in creep-feeding with protein concentrate, with energy concentrate, with energy-protein concentrate and without concentrate. In a Latin square design, four Canchim calves were kept in individual pens, receiving marandu hay and controlled suckling twice a day. The performance was evaluated in a completely randomized design, with 23 calves kept with the cows. Higher intake and nutrients digestibility (65% of dry mater digestibility) and calf performance (live weight gain of 0.98 kg day-1) were obtained with energyprotein concentrate, and the cows kept weight and body reserves during the experiment. The protein concentrate did not show good results, and was lower than the performance of calves without supplementation - 0.56 and 0.77 kg day-1, respectively. The performance of calves without supplementation was similar to calves receiving energy concentrate, but the cows lost more body weight and energy reserves. The supplementation with energy-protein concentrate for lactating calves fed with Brachiara brizantha cv. Marandu during the beginning of the dry season was benefifical for the performance of calves and cows.