Studies on integrating kinematic design method with mechanical systems simulation techniques

Theultimate goal of any research in the mechanism/kinematic/design area may be called predictive design, ie the optimisation of mechanism proportions in the design stage without requiring extensive life and wear testing. This is an ambitious goal and can be realised through development and refinement of numerical (computational) technology in order to facilitate the design analysis and optimisation of complex mechanisms, mechanical components and systems. As a part of the systematic design methodology this thesis concentrates on kinematic synthesis (kinematic design and analysis) methods in the mechanism synthesis process. The main task of kinematic design is to find all possible solutions in the form of structural parameters to accomplish the desired requirements of motion. Main formulations of kinematic design can be broadly divided to exact synthesis and approximate synthesis formulations. The exact synthesis formulation is based in solving n linear or nonlinear equations in n variables and the solutions for the problem areget by adopting closed form classical or modern algebraic solution methods or using numerical solution methods based on the polynomial continuation or homotopy. The approximate synthesis formulations is based on minimising the approximation error by direct optimisation The main drawbacks of exact synthesis formulationare: (ia) limitations of number of design specifications and (iia) failure in handling design constraints- especially inequality constraints. The main drawbacks of approximate synthesis formulations are: (ib) it is difficult to choose a proper initial linkage and (iib) it is hard to find more than one solution. Recentformulations in solving the approximate synthesis problem adopts polynomial continuation providing several solutions, but it can not handle inequality const-raints. Based on the practical design needs the mixed exact-approximate position synthesis with two exact and an unlimited number of approximate positions has also been developed. The solutions space is presented as a ground pivot map but thepole between the exact positions cannot be selected as a ground pivot. In this thesis the exact synthesis problem of planar mechanism is solved by generating all possible solutions for the optimisation process ¿ including solutions in positive dimensional solution sets - within inequality constraints of structural parameters. Through the literature research it is first shown that the algebraic and numerical solution methods ¿ used in the research area of computational kinematics ¿ are capable of solving non-parametric algebraic systems of n equations inn variables and cannot handle the singularities associated with positive-dimensional solution sets. In this thesis the problem of positive-dimensional solutionsets is solved adopting the main principles from mathematical research area of algebraic geometry in solving parametric ( in the mathematical sense that all parameter values are considered ¿ including the degenerate cases ¿ for which the system is solvable ) algebraic systems of n equations and at least n+1 variables.Adopting the developed solution method in solving the dyadic equations in direct polynomial form in two- to three-precision-points it has been algebraically proved and numerically demonstrated that the map of the ground pivots is ambiguousand that the singularities associated with positive-dimensional solution sets can be solved. The positive-dimensional solution sets associated with the poles might contain physically meaningful solutions in the form of optimal defectfree mechanisms. Traditionally the mechanism optimisation of hydraulically driven boommechanisms is done at early state of the design process. This will result in optimal component design rather than optimal system level design. Modern mechanismoptimisation at system level demands integration of kinematic design methods with mechanical system simulation techniques. In this thesis a new kinematic design method for hydraulically driven boom mechanism is developed and integrated in mechanical system simulation techniques. The developed kinematic design method is based on the combinations of two-precision-point formulation and on optimisation ( with mathematical programming techniques or adopting optimisation methods based on probability and statistics ) of substructures using calculated criteria from the system level response of multidegree-of-freedom mechanisms. Eg. by adopting the mixed exact-approximate position synthesis in direct optimisation (using mathematical programming techniques) with two exact positions and an unlimitednumber of approximate positions the drawbacks of (ia)-(iib) has been cancelled.The design principles of the developed method are based on the design-tree -approach of the mechanical systems and the design method ¿ in principle ¿ is capable of capturing the interrelationship between kinematic and dynamic synthesis simultaneously when the developed kinematic design method is integrated with the mechanical system simulation techniques.

On Modelling, System Identification and Control of Servo-Systems with a Flexible Load

The present study was done with two different servo-systems. In the first system, a servo-hydraulic system was identified and then controlled by a fuzzy gainscheduling controller. The second servo-system, an electro-magnetic linear motor in suppressing the mechanical vibration and position tracking of a reference model are studied by using a neural network and an adaptive backstepping controller respectively. Followings are some descriptions of research methods. Electro Hydraulic Servo Systems (EHSS) are commonly used in industry. These kinds of systems are nonlinearin nature and their dynamic equations have several unknown parameters.System identification is a prerequisite to analysis of a dynamic system. One of the most promising novel evolutionary algorithms is the Differential Evolution (DE) for solving global optimization problems. In the study, the DE algorithm is proposed for handling nonlinear constraint functionswith boundary limits of variables to find the best parameters of a servo-hydraulic system with flexible load. The DE guarantees fast speed convergence and accurate solutions regardless the initial conditions of parameters. The control of hydraulic servo-systems has been the focus ofintense research over the past decades. These kinds of systems are nonlinear in nature and generally difficult to control. Since changing system parameters using the same gains will cause overshoot or even loss of system stability. The highly non-linear behaviour of these devices makes them ideal subjects for applying different types of sophisticated controllers. The study is concerned with a second order model reference to positioning control of a flexible load servo-hydraulic system using fuzzy gainscheduling. In the present research, to compensate the lack of dampingin a hydraulic system, an acceleration feedback was used. To compare the results, a pcontroller with feed-forward acceleration and different gains in extension and retraction is used. The design procedure for the controller and experimental results are discussed. The results suggest that using the fuzzy gain-scheduling controller decrease the error of position reference tracking. The second part of research was done on a PermanentMagnet Linear Synchronous Motor (PMLSM). In this study, a recurrent neural network compensator for suppressing mechanical vibration in PMLSM with a flexible load is studied. The linear motor is controlled by a conventional PI velocity controller, and the vibration of the flexible mechanism is suppressed by using a hybrid recurrent neural network. The differential evolution strategy and Kalman filter method are used to avoid the local minimum problem, and estimate the states of system respectively. The proposed control method is firstly designed by using non-linear simulation model built in Matlab Simulink and then implemented in practical test rig. The proposed method works satisfactorily and suppresses the vibration successfully. In the last part of research, a nonlinear load control method is developed and implemented for a PMLSM with a flexible load. The purpose of the controller is to track a flexible load to the desired position reference as fast as possible and without awkward oscillation. The control method is based on an adaptive backstepping algorithm whose stability is ensured by the Lyapunov stability theorem. The states of the system needed in the controller are estimated by using the Kalman filter. The proposed controller is implemented and tested in a linear motor test drive and responses are presented.

On sliding mode control ofhydraulic servo systems and a manipulator

The aim of the study is to developa novel robust controller based on sliding mode control technique for the hydraulic servo system with flexible load and for a flexible manipulator with the lift and jib hydraulic actuators. For the purpose of general control design, a dynamic model is derived describing the principle physical behavior for both the hydraulic servo system and the flexible hydraulic manipulator. The mechanism of hydraulic servo systems is described by basic mathematical equations of fluid powersystems and the dynamics of flexible manipulator is modeled by the assumed modemethod. The controller is constructed so as to track desired trajectories in the presence of model imprecision. Experimental and simulation results demonstratethat sliding mode control has benefits which can be used to guarantee stabilityin uncertain systems and improve the system performance and load tolerance.

Dynamic analysis of belt-drives using the absolute nodal coordinate formulation

Belt-drive systems have been and still are the most commonly used power transmission form in various applications of different scale and use. The peculiar features of the dynamics of the belt-drives include highly nonlinear deformation,large rigid body motion, a dynamical contact through a dry friction interface between the belt and pulleys with sticking and slipping zones, cyclic tension of the belt during the operation and creeping of the belt against the pulleys. The life of the belt-drive is critically related on these features, and therefore, amodel which can be used to study the correlations between the initial values and the responses of the belt-drives is a valuable source of information for the development process of the belt-drives. Traditionally, the finite element models of the belt-drives consist of a large number of elements thatmay lead to computational inefficiency. In this research, the beneficial features of the absolute nodal coordinate formulation are utilized in the modeling of the belt-drives in order to fulfill the following requirements for the successful and efficient analysis of the belt-drive systems: the exact modeling of the rigid body inertia during an arbitrary rigid body motion, the consideration of theeffect of the shear deformation, the exact description of the highly nonlinear deformations and a simple and realistic description of the contact. The use of distributed contact forces and high order beam and plate elements based on the absolute nodal coordinate formulation are applied to the modeling of the belt-drives in two- and three-dimensional cases. According to the numerical results, a realistic behavior of the belt-drives can be obtained with a significantly smaller number of elements and degrees of freedom in comparison to the previously published finite element models of belt-drives. The results of theexamples demonstrate the functionality and suitability of the absolute nodal coordinate formulation for the computationally efficient and realistic modeling ofbelt-drives. This study also introduces an approach to avoid the problems related to the use of the continuum mechanics approach in the definition of elastic forces on the absolute nodal coordinate formulation. This approach is applied to a new computationally efficient two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation. The proposed beam element uses a linear displacement field neglecting higher-order terms and a reduced number of nodal coordinates, which leads to fewer degrees of freedom in a finite element.

Mass transfer and particleinteractions in granular systems and suspension flows

The purpose of this study was to investigate some important features of granular flows and suspension flows by computational simulation methods. Granular materials have been considered as an independent state ofmatter because of their complex behaviors. They sometimes behave like a solid, sometimes like a fluid, and sometimes can contain both phases in equilibrium. The computer simulation of dense shear granular flows of monodisperse, spherical particles shows that the collisional model of contacts yields the coexistence of solid and fluid phases while the frictional model represents a uniform flow of fluid phase. However, a comparison between the stress signals from the simulations and experiments revealed that the collisional model would result a proper match with the experimental evidences. Although the effect of gravity is found to beimportant in sedimentation of solid part, the stick-slip behavior associated with the collisional model looks more similar to that of experiments. The mathematical formulations based on the kinetic theory have been derived for the moderatesolid volume fractions with the assumption of the homogeneity of flow. In orderto make some simulations which can provide such an ideal flow, the simulation of unbounded granular shear flows was performed. Therefore, the homogeneous flow properties could be achieved in the moderate solid volume fractions. A new algorithm, namely the nonequilibrium approach was introduced to show the features of self-diffusion in the granular flows. Using this algorithm a one way flow can beextracted from the entire flow, which not only provides a straightforward calculation of self-diffusion coefficient but also can qualitatively determine the deviation of self-diffusion from the linear law at some regions nearby the wall inbounded flows. Anyhow, the average lateral self-diffusion coefficient, which was calculated by the aforementioned method, showed a desirable agreement with thepredictions of kinetic theory formulation. In the continuation of computer simulation of shear granular flows, some numerical and theoretical investigations were carried out on mass transfer and particle interactions in particulate flows. In this context, the boundary element method and its combination with the spectral method using the special capabilities of wavelets have been introduced as theefficient numerical methods to solve the governing equations of mass transfer in particulate flows. A theoretical formulation of fluid dispersivity in suspension flows revealed that the fluid dispersivity depends upon the fluid properties and particle parameters as well as the fluid-particle and particle-particle interactions.

Steady-state global optimization of metabolic non-linear dynamic models through recasting into power-law canonical models

Background: Design of newly engineered microbial strains for biotechnological purposes would greatly benefit from the development of realistic mathematical models for the processes to be optimized. Such models can then be analyzed and, with the development and application of appropriate optimization techniques, one could identify the modifications that need to be made to the organism in order to achieve the desired biotechnological goal. As appropriate models to perform such an analysis are necessarily non-linear and typically non-convex, finding their global optimum is a challenging task. Canonical modeling techniques, such as Generalized Mass Action (GMA) models based on the power-law formalism, offer a possible solution to this problem because they have a mathematical structure that enables the development of specific algorithms for global optimization. Results: Based on the GMA canonical representation, we have developed in previous works a highly efficient optimization algorithm and a set of related strategies for understanding the evolution of adaptive responses in cellular metabolism. Here, we explore the possibility of recasting kinetic non-linear models into an equivalent GMA model, so that global optimization on the recast GMA model can be performed. With this technique, optimization is greatly facilitated and the results are transposable to the original non-linear problem. This procedure is straightforward for a particular class of non-linear models known as Saturable and Cooperative (SC) models that extend the power-law formalism to deal with saturation and cooperativity. Conclusions: Our results show that recasting non-linear kinetic models into GMA models is indeed an appropriate strategy that helps overcoming some of the numerical difficulties that arise during the global optimization task.

Two component systems: physiological effect of a third component

Signal transduction systems mediate the response and adaptation of organisms to environmental changes. In prokaryotes, this signal transduction is often done through Two Component Systems (TCS). These TCS are phosphotransfer protein cascades, and in their prototypical form they are composed by a kinase that senses the environmental signals (SK) and by a response regulator (RR) that regulates the cellular response. This basic motif can be modified by the addition of a third protein that interacts either with the SK or the RR in a way that could change the dynamic response of the TCS module. In this work we aim at understanding the effect of such an additional protein (which we call ‘‘third component’’) on the functional properties of a prototypical TCS. To do so we build mathematical models of TCS with alternative designs for their interaction with that third component. These mathematical models are analyzed in order to identify the differences in dynamic behavior inherent to each design, with respect to functionally relevant properties such as sensitivity to changes in either the parameter values or the molecular concentrations, temporal responsiveness, possibility of multiple steady states, or stochastic fluctuations in the system. The differences are then correlated to the physiological requirements that impinge on the functioning of the TCS. This analysis sheds light on both, the dynamic behavior of synthetically designed TCS, and the conditions under which natural selection might favor each of the designs. We find that a third component that modulates SK activity increases the parameter space where a bistable response of the TCS module to signals is possible, if SK is monofunctional, but decreases it when the SK is bifunctional. The presence of a third component that modulates RR activity decreases the parameter space where a bistable response of the TCS module to signals is possible.

Dynamic and quasistatic trajectories in quasifission reactions and particle emission

We show that the quasifission paths predicted by the one-body dissipation dynamics, in the slowest phase of a binary reaction, follow a quasistatic path, which represents a sequence of states of thermal equilibrium at a fixed value of the deformation coordinate. This establishes the use of the statistical particle-evaporation model in the case of dynamical time-evolving systems. Pre- and post-scission multiplicities of neutrons and total multiplicities of protons and α particles in fission reactions of 63Cu+92Mo, 60Ni+100Mo, 63Cu+100Mo at 10 MeV/u and 20Ne+144,148,154Sm at 20 MeV/u are reproduced reasonably well with statistical model calculations performed along dynamic trajectories whose slow stage (from the most compact configuration up to the point where the neck starts to develop) lasts some 35×10−21 s.

Dynamic Criteria: a Longitudinal Analysis of Professional Basketball Players" Outcomes

This paper describes the fluctuations of temporal criteria dynamics in the context of professional sport. Specifically, we try to verify the underlying deterministic patterns in the outcomes of professional basketball players. We use a longitudinal approach based on the analysis of the outcomes of 94 basketball players over ten years, covering practically players" entire career development. Time series were analyzed with techniques derived from nonlinear dynamical systems theory. These techniques analyze the underlying patterns in outcomes without previous shape assumptions (linear or nonlinear). These techniques are capable of detecting an intermediate situation between randomness and determinism, called chaos. So they are very useful for the study of dynamic criteria in organizations. We have found most players (88.30%) have a deterministic pattern in their outcomes, and most cases are chaotic (81.92%). Players with chaotic patterns have higher outcomes than players with linear patterns. Moreover, players with power forward and center positions achieve better results than other players. The high number of chaotic patterns found suggests caution when appraising individual outcomes, when coaches try to find the appropriate combination of players to design a competitive team, and other personnel decisions. Management efforts must be made to assume this uncertainty.

Cognitive anatomy of the temporal lobe: Effect of personality in population with mild cognitive impairment & Functional specialization for memory systems in healthy individuals.

Résumé: L'impact de la maladie d'Alzheimer (MA) est dévastateur pour la vie quotidienne de la personne affectée, avec perte progressive de la mémoire et d'autres facultés cognitives jusqu'à la démence. Il n'existe toujours pas de traitement contre cette maladie et il y a aussi une grande incertitude sur le diagnostic des premiers stades de la MA. La signature anatomique de la MA, en particulier l'atrophie du lobe temporal moyen (LTM) mesurée avec la neuroimagerie, peut être utilisée comme un biomarqueur précoce, in vivo, des premiers stades de la MA. Toutefois, malgré le rôle évident du LMT dans les processus de la mémoire, nous savons que les modèles anatomiques prédictifs de la MA basés seulement sur des mesures d'atrophie du LTM n'expliquent pas tous les cas cliniques. Au cours de ma thèse, j'ai conduit trois projets pour comprendre l'anatomie et le fonctionnement du LMT dans (1) les processus de la maladie et dans (2) les processus de mémoire ainsi que (3) ceux de l'apprentissage. Je me suis intéressée à une population avec déficit cognitif léger (« Mild Cognitive Impairment », MCI), à risque pour la MA. Le but du premier projet était de tester l'hypothèse que des facteurs, autres que ceux cognitifs, tels que les traits de personnalité peuvent expliquer les différences interindividuelles dans le LTM. De plus, la diversité phénotypique des manifestations précliniques de la MA provient aussi d'une connaissance limitée des processus de mémoire et d'apprentissage dans le cerveau sain. L'objectif du deuxième projet porte sur l'investigation des sous-régions du LTM, et plus particulièrement de leur contribution dans différentes composantes de la mémoire de reconnaissance chez le sujet sain. Pour étudier cela, j'ai utilisé une nouvelle méthode multivariée ainsi que l'IRM à haute résolution pour tester la contribution de ces sous-régions dans les processus de familiarité (« ou Know ») et de remémoration (ou « Recollection »). Finalement, l'objectif du troisième projet était de tester la contribution du LTM en tant que système de mémoire dans l'apprentissage et l'interaction dynamique entre différents systèmes de mémoire durant l'apprentissage. Les résultats du premier projet montrent que, en plus du déficit cognitif observé dans une population avec MCI, les traits de personnalité peuvent expliquer les différences interindividuelles du LTM ; notamment avec une plus grande contribution du neuroticisme liée à une vulnérabilité au stress et à la dépression. Mon étude a permis d'identifier un pattern d'anormalité anatomique dans le LTM associé à la personnalité avec des mesures de volume et de diffusion moyenne du tissu. Ce pattern est caractérisé par une asymétrie droite-gauche du LTM et un gradient antéro-postérieur dans le LTM. J'ai interprété ce résultat par des propriétés tissulaires et neurochimiques différemment sensibles au stress. Les résultats de mon deuxième projet ont contribué au débat actuel sur la contribution des sous-régions du LTM dans les processus de familiarité et de remémoration. Utilisant une nouvelle méthode multivariée, les résultats supportent premièrement une dissociation des sous-régions associées aux différentes composantes de la mémoire. L'hippocampe est le plus associé à la mémoire de type remémoration et le cortex parahippocampique, à la mémoire de type familiarité. Deuxièmement, l'activation correspondant à la trace mnésique pour chaque type de mémoire est caractérisée par une distribution spatiale distincte. La représentation neuronale spécifique, « sparse-distributed», associée à la mémoire de remémoration dans l'hippocampe serait la meilleure manière d'encoder rapidement des souvenirs détaillés sans interférer les souvenirs précédemment stockés. Dans mon troisième projet, j'ai mis en place une tâche d'apprentissage en IRM fonctionnelle pour étudier les processus d'apprentissage d'associations probabilistes basé sur le feedback/récompense. Cette étude m'a permis de mettre en évidence le rôle du LTM dans l'apprentissage et l'interaction entre différents systèmes de mémoire comme la mémoire procédurale, perceptuelle ou d'amorçage et la mémoire de travail. Nous avons trouvé des activations dans le LTM correspondant à un processus de mémoire épisodique; les ganglions de la base (GB), à la mémoire procédurale et la récompense; le cortex occipito-temporal (OT), à la mémoire de représentation perceptive ou l'amorçage et le cortex préfrontal, à la mémoire de travail. Nous avons également observé que ces régions peuvent interagir; le type de relation entre le LTM et les GB a été interprété comme une compétition, ce qui a déjà été reporté dans des études récentes. De plus, avec un modèle dynamique causal, j'ai démontré l'existence d'une connectivité effective entre des régions. Elle se caractérise par une influence causale de type « top-down » venant de régions corticales associées avec des processus de plus haut niveau venant du cortex préfrontal sur des régions corticales plus primaires comme le OT cortex. Cette influence diminue au cours du de l'apprentissage; cela pourrait correspondre à un mécanisme de diminution de l'erreur de prédiction. Mon interprétation est que cela est à l'origine de la connaissance sémantique. J'ai également montré que les choix du sujet et l'activation cérébrale associée sont influencés par les traits de personnalité et des états affectifs négatifs. Les résultats de cette thèse m'ont amenée à proposer (1) un modèle expliquant les mécanismes possibles liés à l'influence de la personnalité sur le LTM dans une population avec MCI, (2) une dissociation des sous-régions du LTM dans différents types de mémoire et une représentation neuronale spécifique à ces régions. Cela pourrait être une piste pour résoudre les débats actuels sur la mémoire de reconnaissance. Finalement, (3) le LTM est aussi un système de mémoire impliqué dans l'apprentissage et qui peut interagir avec les GB par une compétition. Nous avons aussi mis en évidence une interaction dynamique de type « top -down » et « bottom-up » entre le cortex préfrontal et le cortex OT. En conclusion, les résultats peuvent donner des indices afin de mieux comprendre certains dysfonctionnements de la mémoire liés à l'âge et la maladie d'Alzheimer ainsi qu'à améliorer le développement de traitement. Abstract: The impact of Alzheimer's disease is devastating for the daily life of the affected patients, with progressive loss of memory and other cognitive skills until dementia. We still lack disease modifying treatment and there is also a great amount of uncertainty regarding the accuracy of diagnostic classification in the early stages of AD. The anatomical signature of AD, in particular the medial temporal lobe (MTL) atrophy measured with neuroimaging, can be used as an early in vivo biomarker in early stages of AD. However, despite the evident role of MTL in memory, we know that the derived predictive anatomical model based only on measures of brain atrophy in MTL does not explain all clinical cases. Throughout my thesis, I have conducted three projects to understand the anatomy and the functioning of MTL on (1) disease's progression, (2) memory process and (3) learning process. I was interested in a population with mild cognitive impairment (MCI), at risk for AD. The objective of the first project was to test the hypothesis that factors, other than the cognitive ones, such as the personality traits, can explain inter-individual differences in the MTL. Moreover, the phenotypic diversity in the manifestations of preclinical AD arises also from the limited knowledge of memory and learning processes in healthy brain. The objective of the second project concerns the investigation of sub-regions of the MTL, and more particularly their contributions in the different components of recognition memory in healthy subjects. To study that, I have used a new multivariate method as well as MRI at high resolution to test the contribution of those sub-regions in the processes of familiarity and recollection. Finally, the objective of the third project was to test the contribution of the MTL as a memory system in learning and the dynamic interaction between memory systems during learning. The results of the first project show that, beyond cognitive state of impairment observed in the population with MCI, the personality traits can explain the inter-individual differences in the MTL; notably with a higher contribution of neuroticism linked to proneness to stress and depression. My study has allowed identifying a pattern of anatomical abnormality in the MTL related to personality with measures of volume and mean diffusion of the tissue. That pattern is characterized by right-left asymmetry in MTL and an anterior to posterior gradient within MTL. I have interpreted that result by tissue and neurochemical properties differently sensitive to stress. Results of my second project have contributed to the actual debate on the contribution of MTL sub-regions in the processes of familiarity and recollection. Using a new multivariate method, the results support firstly a dissociation of the subregions associated with different memory components. The hippocampus was mostly associated with recollection and the surrounding parahippocampal cortex, with familiarity type of memory. Secondly, the activation corresponding to the mensic trace for each type of memory is characterized by a distinct spatial distribution. The specific neuronal representation, "sparse-distributed", associated with recollection in the hippocampus would be the best way to rapidly encode detailed memories without overwriting previously stored memories. In the third project, I have created a learning task with functional MRI to sudy the processes of learning of probabilistic associations based on feedback/reward. That study allowed me to highlight the role of the MTL in learning and the interaction between different memory systems such as the procedural memory, the perceptual memory or priming and the working memory. We have found activations in the MTL corresponding to a process of episodic memory; the basal ganglia (BG), to a procedural memory and reward; the occipito-temporal (OT) cortex, to a perceptive memory or priming and the prefrontal cortex, to working memory. We have also observed that those regions can interact; the relation type between the MTL and the BG has been interpreted as a competition. In addition, with a dynamic causal model, I have demonstrated a "top-down" influence from cortical regions associated with high level cortical area such as the prefrontal cortex on lower level cortical regions such as the OT cortex. That influence decreases during learning; that could correspond to a mechanism linked to a diminution of prediction error. My interpretation is that this is at the origin of the semantic knowledge. I have also shown that the subject's choice and the associated brain activation are influenced by personality traits and negative affects. Overall results of this thesis have brought me to propose (1) a model explaining the possible mechanism linked to the influence of personality on the MTL in a population with MCI, (2) a dissociation of MTL sub-regions in different memory types and a neuronal representation specific to each region. This could be a cue to resolve the actual debates on recognition memory. Finally, (3) the MTL is also a system involved in learning and that can interact with the BG by a competition. We have also shown a dynamic interaction of « top -down » and « bottom-up » types between the pre-frontal cortex and the OT cortex. In conclusion, the results could give cues to better understand some memory dysfunctions in aging and Alzheimer's disease and to improve development of treatment.

Asymmetrical nature of the Trollius-Chiastocheta interaction: insights into the evolution of nursery pollination systems

The mutualistic versus antagonistic nature of an interaction is defined by costs and benefits of each partner, which may vary depending on the environment. Contrasting with this dynamic view, several pollination interactions are considered as strictly obligate and mutualistic. Here, we focus on the interaction between Trollius europaeus and Chiastocheta flies, considered as a specialized and obligate nursery pollination system - the flies are thought to be exclusive pollinators of the plant and their larvae develop only in T.europaeus fruits. In this system, features such as the globelike flower shape are claimed to have evolved in a coevolutionary context. We examine the specificity of this pollination system and measure traits related to offspring fitness in isolated T.europaeus populations, in some of which Chiastocheta flies have gone extinct. We hypothesize that if this interaction is specific and obligate, the plant should experience dramatic drop in its relative fitness in the absence of Chiastocheta. Contrasting with this hypothesis, T.europaeus populations without flies demonstrate a similar relative fitness to those with the flies present, contradicting the putative obligatory nature of this pollination system. It also agrees with our observation that many other insects also visit and carry pollen among T.europaeus flowers. We propose that the interaction could have evolved through maximization of by-product benefits of the Chiastocheta visits, through the male flower function, and selection on floral traits by the most effective pollinator. We argue this mechanism is also central in the evolution of other nursery pollination systems.

Design and evaluation of learning algorithms for dynamic resource management in virtual networks

Network virtualisation is considerably gaining attentionas a solution to ossification of the Internet. However, thesuccess of network virtualisation will depend in part on how efficientlythe virtual networks utilise substrate network resources.In this paper, we propose a machine learning-based approachto virtual network resource management. We propose to modelthe substrate network as a decentralised system and introducea learning algorithm in each substrate node and substrate link,providing self-organization capabilities. We propose a multiagentlearning algorithm that carries out the substrate network resourcemanagement in a coordinated and decentralised way. The taskof these agents is to use evaluative feedback to learn an optimalpolicy so as to dynamically allocate network resources to virtualnodes and links. The agents ensure that while the virtual networkshave the resources they need at any given time, only the requiredresources are reserved for this purpose. Simulations show thatour dynamic approach significantly improves the virtual networkacceptance ratio and the maximum number of accepted virtualnetwork requests at any time while ensuring that virtual networkquality of service requirements such as packet drop rate andvirtual link delay are not affected.

Managing the Front End of Innovation in a Networked Company Environment - Combining Strategy, Processes and Systems of Innovation

The objective of the thesis is to enhance the understanding about the management of the front end phases of the innovation process in a networked environment. The thesis approaches the front end of innovation from three perspectives, including the strategy, processes and systems of innovation. The purpose of the use of different perspectives in the thesis is that of providing an extensive systemic view of the front end, and uncovering the complex nature of innovation management. The context of the research is the networked operating environment of firms. The unit of analysis is the firm itself or its innovation processes, which means that this research approaches the innovation networks from the point of view of a firm. The strategy perspective of the thesis emphasises the importance of purposeful innovation management, the innovation strategy of firms. The role of innovation processes is critical in carrying out innovation strategies in practice, supporting the development of organizational routines for innovation, and driving the strategic renewal of companies. The primary focus of the thesis from systems perspective is on idea management systems, which are defined as a part of innovation management systems, and defined for this thesis as any working combination of methodology and tools (manual or IT-supported) that enhance the management of innovations within their early phases. The main contribution of the thesis are the managerial frameworks developed for managing the front end of innovation, which purposefully “wire” the front end of innovation into the strategy and business processes of a firm. The thesis contributes to modern innovation management by connecting the internal and external collaboration networks as foundational elements for successful management of the early phases of innovation processes in a dynamic environment. The innovation capability of a firm is largely defined by its ability to rely on and make use of internal and external collaboration already during the front end activities, which by definition include opportunity identification and analysis, idea generation, profileration and selection, and concept definition. More specifically, coordination of the interfaces between these activities, and between the internal and external innovation environments of a firm is emphasised. The role of information systems, in particular idea management systems, is to support and delineate the innovation-oriented behaviour and interaction of individuals and organizations during front end activities. The findings and frameworks developed in the thesis can be used by companies for purposeful promotion of their front end processes. The thesis provides a systemic strategy framework for managing the front end of innovation – not as a separate process, but as an elemental bundle ofactivities that is closely linked to the overall innovation process and strategy of a firm in a distributed environment. The theoretical contribution of the thesis relies on the advancement of the open innovation paradigm in the strategic context of a firm within its internal and external innovation environments. This thesis applies the constructive research approach and case study methodology to provide theoretically significant results, which are also practically beneficial.

Dimensioning DC-voltage capacitor for a DC-distribution system and dynamic analysis

Technical analysis of Low Voltage Direct Current (LVDC) distribution systems shows that in LVDC transmission the customer voltage quality is higher. One of the problems in LVDC distribution networks that converters both ends of the DC line are required. Because of the converters produce not pure DC voltage, but some fluctuations as well, the huge electrolytic capacitors are required to reduce voltage distortions in the DC-side. This thesis master’s thesis is focused on calculating required DC-link capacitance for LVDC transmission and estimation of the influence of different parameters on the voltage quality. The goal is to investigate the methods of the DC-link capacitance estimation and location in the transmission line.

Dynamic patterns of flow in the workplace: characterizing within-individual variability using a complexity science approach

As a result of the growing interest in studying employee well-being as a complex process that portrays high levels of within-individual variability and evolves over time, this present study considers the experience of flow in the workplace from a nonlinear dynamical systems approach. Our goal is to offer new ways to move the study of employee well-being beyond linear approaches. With nonlinear dynamical systems theory as the backdrop, we conducted a longitudinal study using the experience sampling method and qualitative semi-structured interviews for data collection; 6981 registers of data were collected from a sample of 60 employees. The obtained time series were analyzed using various techniques derived from the nonlinear dynamical systems theory (i.e., recurrence analysis and surrogate data) and multiple correspondence analyses. The results revealed the following: 1) flow in the workplace presents a high degree of within-individual variability; this variability is characterized as chaotic for most of the cases (75%); 2) high levels of flow are associated with chaos; and 3) different dimensions of the flow experience (e.g., merging of action and awareness) as well as individual (e.g., age) and job characteristics (e.g., job tenure) are associated with the emergence of different dynamic patterns (chaotic, linear and random).