Estimation and calibration of the water isotope differential diffusion length in ice core records

Palaeoclimatic information can be retrieved from the diffusion of the stable water isotope signal during firnification of snow. The diffusion length, a measure for the amount of diffusion a layer has experienced, depends on the firn temperature and the accumulation rate. We show that the estimation of the diffusion length using power spectral densities (PSDs) of the record of a single isotope species can be biased by uncertainties in spectral properties of the isotope signal prior to diffusion. By using a second water isotope and calculating the difference in diffusion lengths between the two isotopes, this problem is circumvented. We study the PSD method applied to two isotopes in detail and additionally present a new forward diffusion method for retrieving the differential diffusion length based on the Pearson correlation between the two isotope signals. The two methods are discussed and extensively tested on synthetic data which are generated in a Monte Carlo manner. We show that calibration of the PSD method with this synthetic data is necessary to be able to objectively determine the differential diffusion length. The correlation-based method proves to be a good alternative for the PSD method as it yields precision equal to or somewhat higher than the PSD method. The use of synthetic data also allows us to estimate the accuracy and precision of the two methods and to choose the best sampling strategy to obtain past temperatures with the required precision. In addition to application to synthetic data the two methods are tested on stable-isotope records from the EPICA (European Project for Ice Coring in Antarctica) ice core drilled in Dronning Maud Land, Antarctica, showing that reliable firn temperatures can be reconstructed with a typical uncertainty of 1.5 and 2 °C for the Holocene period and 2 and 2.5 °C for the last glacial period for the correlation and PSD method, respectively.

Innovation Processes and Industrial Districts

In this survey, we examine the operations of innovation processes within industrial districts by exploring the ways in which differentiation, specialization, and integration affect the generation, diffusion, and use of new knowledge in such districts. We begin with an analysis of the importance of the division of labor and then investigate the effects of social embeddedness on innovation. We also consider the effect of forms of organization within industrial districts at various stages of product and process life, and we examine the negative aspects of embeddedness for innovation. We conclude with a discussion of the possible consequences of new information and communications technologies on innovation in industrial districts.

Relation between acid back -diffusion and luminal surface hydrophobicity in canine gastric mucosa: Effects of salicylate and prostaglandin

The stomach is thought to be protected from luminal acid by a gastric mucosal barrier that restricts the diffusion of acid into tissue. This study tested the hypothesis that the hydrophobic luminal surface of canine gastric mucosa incubated in Ussing chambers, impedes the back-diffusion of luminal acid into the tissue. Isolated sheets of mucosa were treated with cimetidine to inhibit spontaneous acid secretion, and incubated under conditions that prevented significant secretion of luminal bicarbonate. By measuring acid loss from the luminal compartment using the pH-stat technique, acid back-diffusion was continuously monitored; potential difference (PD) was measured as an index of tissue viability. Tissue luminal surface hydrophobicity was estimated by contact angle analysis at the end of each experiment. Addition of 16,16-dimethyl prostaglandin E$\sb2$ to the nutrient compartment enhanced luminal surface hydrophobicity, but did not reduce acid back-diffusion in tissues that maintained a constant PD. 10 mM salicylate at pH 4.00 in the luminal compartment reduced surface hydrophobicity, but this decrease did not occur if 1 ug/ml prostaglandin was present in the nutrient solution. Despite possessing relatively hydrophilic and relatively hydrophobic surface properties, respectively, acid back-diffusion in the absence of salicylate was not significantly different between these two groups. Neither group maintained a PD after incubation with salicylate. Lastly, radiolabelled salicylate was used to calculate the free (non-salicylate associated) acid loss in tissues incubated with salicylate and/or prostaglandin. No significant correlation was found between free acid back-diffusion and luminal surface hydrophobicity. These data do not support the hypothesis that acid back-diffusion in impeded by the hydrophobic surface presented by isolated canine gastric mucosa. ^

Innovation networks in China, Japan, and Korea : evidence from Japanese patent data

The growing importance of innovation in economic growth has encouraged the development of innovation capabilities in East Asia, within which China, Japan, and Korea are most important in terms of technological capabilities. Using Japanese patent data, we examine how knowledge networks have developed among these countries. We find that Japan's technological specialization saw little change, but those of Korea and China changed rapidly since 1970s. By the year 2009, technology specialization has become similar across three countries in the sense that the common field of prominent technology is "electronic circuits and communication technologies". Patent citations suggest that technology flows were largest in the electronic technology, pointing to the deepening of innovation networks in these countries.

Innovation networks in China, Japan, and Korea : further evidence from U.S. patent data

The growing importance of innovation in economic growth has encouraged the development of innovation capabilities in East Asia, within which China, Japan, and Korea are most important in terms of technological capabilities. Using U.S. patent data, we examine how knowledge networks have developed among these countries. We find that Japan's technological specialization saw gradual changes, but those of Korea and China changed rapidly since 1970s. By the year 2009, technology specialization has become similar across three countries in the sense that the common fields of prominent technology are electronics and semiconductors. Patent citations suggest that technology flows were largest in the electronics technology, pointing to the deepening of innovation networks in these countries. Together with our prior work, the Japanese and U.S. data produce similar conclusions about innovation networks.

Innovation in Eastern Europe : a case study of Czech Republic

In this study we evaluate innovative performance of the economies of Central and Eastern Europe (CEE) based on the available statistics of innovation processes. We compare such country-level indicators as educational levels, investments in R&D, FDI, trade and licensing flows, patents and scientific articles, and find that the most developed CEE economies are also the most innovative. At the same time, as supported by the results of the interviews in Czech Republic, one of the top performers in the CEE region, its economy is facing a number of challenges that are similar to other middle-income countries around the world. We suggest addressing these challenges from the prospective of the Middle Income Trap, when a middle-income economy to sustain growth must learn to compete with advanced economies in high-skill innovation. Development of effective innovation policy should be a priority for the CEE countries to escape from the middle income trap.

Thermal diffusion profile by NRA of Deuterium implanted in solid breeder blanket materials

This paper studies the relationship between aging, physical changes and the results of non-destructive testing of plywood. 176 pieces of plywood were tested to analyze their actual and estimated density using non-destructive methods (screw withdrawal force and ultrasound wave velocity) during a laboratory aging test. From the results of statistical analysis it can be concluded that there is a strong relationship between the non-destructive measurements carried out, and the decline in the physical properties of the panels due to aging. The authors propose several models to estimate board density. The best results are obtained with ultrasound. A reliable prediction of the degree of deterioration (aging) of board is presented. Breeder blanket materials have to produce tritium from lithium while fulfilling several strict conditions. In particular, when dealing with materials to be applied in fusion reactors, one of the key questions is the study of light ions retention, which can be produced by transmutation reactions and/or introduced by interaction with the plasma. In ceramic breeders the understanding of the hydrogen isotopes behaviour and specially the diffusion of tritium to the surface is crucial. Moreover the evolution of the microstructure during irradiation with energetic ions, neutrons and electrons is complex because of the interaction of a high number of processes.

Analysis of behavior directed towards changing the innovation agents. Case study of the Canary Islands

In 2005 the Directorate General for Industrial Development and Technological Innovation of the Canary Islands proceeded to carry out a project to measure the behavioral skills of various government agencies and companies in the Canary Islands in order to prepare a White Paper to assess the most effective measures for the stimulation of innovation in this autonomous community and to facilitate the objectives of public subsidies. This paper shows a portion of the work performed comparing the activity oriented towards innovation and the one aimed at sustaining the status quo of the organizations in the sample.

Understanding the main drivers of value creation in an open innovation program

Innovation has been identified as the single most relevant element in fuelling corporations’ competitive advantage and ultimate value creation. Corporations no longer rely on a single, linear structure of innovation; the new paradigm of open innovation opens up new possibilities of organizing innovation within the ecosystem, thus giving rise to new drivers for value creation. These value drivers have an impact on the strategic position of the firm and have the ability to create superior financial performance. In this paper we explore the close relationship between open innovation and value creation and propose a framework to analyze this process as well as the most critical elements involved.

Caracterización de Sistemas intensivos en Software desde un punto de vista de innovación=Characterizing Software-intensive Systems from the innovation point of view

La innovación en Sistemas Intesivos en Software está alcanzando relevancia por múltiples razones: el software está presente en sectores como automóvil, teléfonos móviles o salud. Las empresas necesitan conocer aquellos factores que afectan a la innovación para incrementar las probabilidades de éxito en el desarrollo de sus productos y, la evaluación de productos sofware es un mecanismo potente para capturar este conocimiento. En consecuencia, las empresas necesitan evaluar sus productos desde la perpectiva de innovación para reducir la distancia entre los productos desarrollados y el mercado. Esto es incluso más relevante en el caso de los productos intensivos en software, donde el tiempo real, la oportunidad, complejidad, interoperabilidad, capacidad de respuesta y compartción de recursos son características críticas de los nuevos sistemas. La evaluación de la innovación de productos ya ha sido estudiada y se han definido algunos esquemas de evaluación pero no son específicos para Sistemas intensivos en Sofwtare; además, no se ha alcanzado consenso en los factores ni el procedimiento de evaluación. Por lo tanto, tiene sentido trabajar en la definición de un marco de evaluación de innovación enfocado a Sistemas intesivos en Software. Esta tesis identifica los elementos necesarios para construir in marco para la evaluación de de Sistemas intensivos en Software desde el punto de vista de la innovación. Se han identificado dos componentes como partes del marco de evaluación: un modelo de referencia y una herramienta adaptativa y personalizable para la realización de la evaluación y posicionamiento de la innovación. El modelo de referencia está compuesto por cuatro elementos principales que caracterizan la evaluación de innovación de productos: los conceptos, modelos de innovación, cuestionarios de evaluación y la evaluación de productos. El modelo de referencia aporta las bases para definir instancias de los modelos de evaluación de innovación de productos que pueden se evaluados y posicionados en la herramienta a través de cuestionarios y que de forma automatizada aporta los resultados de la evaluación y el posicionamiento respecto a la innovación de producto. El modelo de referencia ha sido rigurosamente construido aplicando modelado conceptual e integración de vistas junto con la aplicación de métodos cualitativos de investigación. La herramienta ha sido utilizada para evaluar productos como Skype a través de la instanciación del modelo de referencia. ABSTRACT Innovation in Software intensive Systems is becoming relevant for several reasons: software is present embedded in many sectors like automotive, robotics, mobile phones or heath care. Firms need to have knowledge about factors affecting the innovation to increase the probability of success in their product development and the assessment of innovation in software products is a powerful mechanism to capture this knowledge. Therefore, companies need to assess products from an innovation perspective to reduce the gap between their developed products and the market. This is even more relevant in the case of SiSs, where real time, timeliness, complexity, interoperability, reactivity, and resource sharing are critical features of a new system. Many authors have analysed product innovation assessment and some schemas have been developed but they are not specific to SiSs; in addition, there is no consensus about the factors or the procedures for performing an assessment. Therefore, it has sense to work in the definition of a customized software product innovation evaluation framework. This thesis identifies the elements needed to build a framework to assess software products from the innovation perspective. Two components have been identified as part of the framework to assess Software intensive Systems from the innovation perspective: a reference-model and an adaptive and customizable tool to perform the assessment and to position product innovation. The reference-model is composed by four main elements characterizing product innovation assessment: concepts, innovation models, assessment questionnaires and product assessment. The reference model provides the umbrella to define instances of product innovation assessment models that can be assessed and positioned through questionnaires in the proposed tool that also provides automation in the assessment and positioning of innovation. The reference-model has been rigorously built by applying conceptual modelling and view integration integrated with qualitative research methods. The tool has been used to assess products like Skype through models instantiated from the reference-model.

Innovation projects performance: Analyzing the impact of organizational characteristics

This study analyzes the effect of organizational characteristics on the innovation project performance. This research applies fuzzy set Qualitative Comparative Analysis (fsQCA) to a large sample of Spanish firms appearing in the Community Innovation survey (CIS). The results show that the combination of organizational innovation, firm size and cooperationwith national and, especially, international firms is a sufficient condition for the success of innovation projects within the organization. Evidence also suggests that variables such as the investment on R&D peremployee or the seniority of the company do not affect the success of innovation projects. These findings help complement some results in previous studies on innovation projects performance.

Comparative Analysis of Firms’ Participation in National and International Programmes to Support Innovation

Innovation is a process that faces several market failure situations. For this reason and for being considered one of the main drivers of economic growth, a large number of governmental and supranational policies are designed to foster technological progress. Along with these policies, there is an increasing concern with their continuous evaluation aiming at providing valuable feedback for these program?s adaptation and adequacy to the firm?s needs. The paper develops an evaluation of the influence of innovation-focused programs in firm¿s innovation and economic performance by means of a comparative analysis of the results obtained by Spanish firms that have participated in R&D national programmes and those achieved by Spanish firms participating in EUREKA international program. Findings show that the programmes were effective in achieving their objective of promoting technological innovation but, as regards the economic effects, the results were less conclusive since some differences were observed depending on the programme. The EUREKA companies displayed better behaviour, with positive differences in their returns on assets and labour productivity. The results also confirm the importance of designing more detailed and rigorous evaluation processes, taking into account the risk variable, in order to draw a more realistic picture of the impact of national and international programmes.

Intracellular pH in adipocytes: effects of free fatty acid diffusion across the plasma membrane, lipolytic agonists, and insulin.

The main function of white adipose tissue is to store nutrient energy in the form of triglycerides. The mechanism by which free fatty acids (FFA) move into and out of the adipocyte has not been resolved. We show here that changes in intracellular pH (pH1) in adipocytes correlate with the movement of FFA across cellular membranes as predicted by the Kamp and Hamilton model of passive diffusion of FFA. Exposure of fat cells to lipolytic agents or external FFA results is a rapid intracellular acidification that is reversed by metabolism of the FFA or its removal by albumin. In contrast, insulin causes an alkalinization of the cell, consistent with its main function to promote esterification. Inhibition of Na+/H+ exchange in adipocytes does not prevent the changes in pHi caused by FFA, lipolytic agents, or insulin. A fatty acid dimer, which diffuses into the cell but is not metabolized, causes an irreversible acidification. Taken together, the data suggest that changes in pHi occur in adipocytes in response to the passive diffusion of un-ionized FFA (flip-flop) into and out of the cell and in response to their metabolism and production within the cell. These changes in pHi may, in turn, modulate hormonal signaling and metabolism with significant impact on cell function.

Diffusion and formation of microtubule asters: physical processes versus biochemical regulation.

Microtubule asters forming the mitotic spindle are assembled around two centrosomes through the process of dynamic instability in which microtubules alternate between growing and shrinking states. By modifying the dynamics of this assembly process, cell cycle enzymes, such as cdc2 cyclin kinases, regulate length distributions in the asters. It is believed that the same enzymes control the number of assembled microtubules by changing the "nucleating activity" of the centrosomes. Here we show that assembly of microtubule asters may be strongly altered by effects connected with diffusion of tubulin monomers. Theoretical analysis of a simple model describing assembly of microtubule asters clearly shows the existence of a region surrounding the centrosome depleted in GTP tubulin. The number of assembled microtubules may in some cases be limited by this depletion effect rather than by the number of available nucleation sites on the centrosome.

Functional properties of sodium and calcium caseinate antimicrobial active films containing carvacrol

Active edible films were prepared by adding carvacrol into sodium caseinate (SC) and calcium caseinate (CC) matrices plasticized with two different glycerol concentrations (25 and 35 wt%) prepared by solvent casting. Functional characterisation of these bio-films was carried out by determination of some of their physico-chemical properties, such as colour, transparency, oxygen barrier, wettability, dye permeation properties and antibacterial effectiveness against Gram negative and Gram positive bacteria. All films exhibited good performance in terms of optical properties in the CIELab space showing high transparency. Carvacrol was able to reduce CC oxygen permeability and slightly increased the surface hydrophobicity. Dye diffusion experiments were performed to evaluate permeation properties. The diffusion of dye through films revealed that SC was more permeable than CC. The agar diffusion method was used for the evaluation of the films antimicrobial effectiveness against Escherichia coli and Staphylococcus aureus. Both SC and CC edible films with carvacrol showed inhibitory effects on both bacteria.