Lubrication efficiency and die design in wire drawing

With the competitive challenge facing business today, the need to keep cost down and quality up is a matter of survival. One way in which wire manufacturers can meet this challenge is to possess a thorough understanding of deformation, friction and lubrication during the wire drawing process, and therefore to make good decisions regarding the selection and application of lubricants as well as the die design. Friction, lubrication and die design during wire drawing thus become the subject of this study. Although theoretical and experimental investigations have been being carried out ever since the establishment of wire drawing technology, many problems remain unsolved. It is therefore necessary to conduct further research on traditional and fundamental subjects such as the mechanics of deformation, friction, lubrication and die design in wire drawing. Drawing experiments were carried out on an existing bull-block under different cross-sectional area reductions, different speeds and different lubricants. The instrumentation to measure drawing load and drawing speed was set up and connected to the wire drawing machine, together with a data acquisition system. A die box connected to the existing die holder for using dry soap lubricant was designed and tested. The experimental results in terms of drawing stress vs percentage area reduction curves under different drawing conditions were analysed and compared. The effects on drawing stress of friction, lubrication, drawing speed and pressure die nozzle are discussed. In order to determine the flow stress of the material during deformation, tensile tests were performed on an Instron universal test machine, using the wires drawn under different area reductions. A polynomial function is used to correlate the flow stress of the material with the plastic strain, on which a general computer program has been written to find out the coefficients of the stress-strain function. The residual lubricant film on the steel wire after drawing was examined both radially and longitudinally using an SEM and optical microscope. The lubricant film on the drawn wire was clearly observed. Therefore, the micro-analysis by SEM provides a way of friction and lubrication assessment in wire drawing.

Servitization of manufacturing

The servicisation agenda is arguably one of the most important facing western manufacturers. In a world of severe international competition, it can be the basis of distinct competitive advantage, and a means to differentiate a company's products from goods produced in low cost economies. The concept of Product Service Systems (PSS) is, in particular, a special case of servicisation. With PSS, the market proposition is designed as a system that exploits synergies between products and services while, at the same time, seeks to reduce the economic and environmental costs of delivery. Although key to sustaining western manufacturing operations, major issues arise with design and management of engineering, manufacturing and supply chain activities for successful implementation of such a service-led competitive strategy. This session includes presentations which examine the opportunities and challenges associated with servicisation in more detail.

Evolving forms of manufacturing strategy development:evidence and implications

This paper outlines, using evidence from several case studies, the use of alternative forms of manufacturing strategy processes. Our investigation shows that the manufacturing strategy development practices of manufacturers are evolving in many directions; we found several alternatives to the formal top-down planning process. Manufacturers use one or more of the following alternatives with or without the top-down manufacturing strategy process: a coherent pattern of actions; manufacturing/process improvement programs; or the pursuit of core manufacturing capabilities. It appears that the various manufacturing strategy development processes may be tied to the strategic role of manufacturing in a company. This paper offers a framework that captures the relationship between the strategic role of manufacturing and the process of manufacturing strategy development. An in-depth case from a UK company illustrates the evolving forms of manufacturing strategy development processes.

Capabilities and competitiveness of Chinese state owned manufacturing enterprises:what has been learned over 20 years and what remains to be learned

Technological capabilities in Chinese manufacturing have been transformed in the last three decades. However, the extent to which and how domestic market oriented state owned enterprises (SOEs) have developed their capabilities remain important questions. The East Asian latecomer model has been adapted to study six Chinese SOEs in the automotive, steel and machine tools sectors to assess capability levels attained and the role of external sources and internal efforts in developing them. All six enterprises demonstrate high competence in operating established technology, managing investment and making product and process improvements but differ in innovative capability. While the East Asian latecomer model in which linking, leveraging and learning explain technological capability development is relevant for the companies studied, it needs to be adapted for Chinese SOEs to take account of types of external links and leverage of enterprises, the role of government, enterprise level management motives and means of financing development.

Quality management and performance:a comparison between the UK and Turkey

Purpose: The aim of this article is to detail the correlation between quality management, specifically its tools and critical success factors, and performance in terms of primary operational and secondary organisational performances. Design/methodology/approach: Survey data from the UK and Turkey were analysed using exploratory factor analyses, structural equation modelling and regression analysis. Findings: The results show that quality management has a significant and positive impact on both primary and secondary performances; that Turkish and UK attitudes to quality management are similar; and that quality management is widely practised in manufacturing and service industries but has more statistical emphasis in the manufacturing sector. The main challenge for making quality management practice more effective lies in an appropriate balanced use of the different sorts of the tools and critical success factors. Originality/value: This study takes a novel approach by: (i) exploring the relationship between primary operational and secondary organisational performances, (ii) using service and manufacturing data and (iii) making a cross-country comparison between the UK (a developed economy) and Turkey (a developing economy). Limitations: Detailed contrast provided between only two countries. © 2013 Copyright Taylor and Francis Group, LLC.

Modularity and industrial complexes:perspectives for green operations in the automotive industry

This paper discusses the possible contributions from modularity and industrial condominiums towards enhancing environmental performance in the automotive industry. The research described in this study is underpinned by a review of journal articles and books on the topics of: modularity of production systems; green operations practices, and the automotive industry and sustainability. The methodology is based on theoretical analysis of the contribution of the modular production system characteristics used in the automotive industry for Green Operations Practices (GOP). The following GOPs were considered: green buildings, eco design, green supply chains, greener manufacturing, and reverse logistics. The results are theoretical in nature; however, due to the small number of studies that investigate the relationship between modularity and sustainability, this work is relevant to increase knowledge in academic circles and among practitioners in order to understand the possible environmental benefits from modular production systems.

The servitization of manufacturing:a systematic literature review of interdependent trends

Purpose: The servitization of manufacturing is a diverse and complex field of research interest. The purpose of this paper is to provide an integrative and organising lens for viewing the various contributions to knowledge production from those research communities addressing servitization. To achieve this, the paper aims to set out to address two principal questions, namely where are the knowledge stocks and flows amongst the research communities? And what are generic research concerns being addressed by these communities? Design/methodology/approach: Using an evidenced-based approach, the authors have performed a systematic review of the research literature associated with the servitization of manufacturing. This investigation incorporates a descriptive and thematic analysis of 148 academic and scholarly papers from 103 different lead authors in 68 international peer-reviewed journals. Findings: The work proposes support for the existence of distinct researcher communities, namely services marketing, service management, operations management, product-service systems and service science management and engineering, which are contributing to knowledge production in the servitization of manufacturing. Knowledge stocks within all communities associated with research in the servitization of manufacturing have dramatically increased since the mid-1990s. The trends clearly reveal that the operations community is in receipt of the majority of citations relating to the servitization of manufacturing. In terms of knowledge flows, it is apparent that the more mature communities are drawing on more locally produced knowledge stocks, whereas the emergent communities are drawing on a knowledge base more evenly distributed across all the communities. The results are indicative of varying degrees of interdependency amongst the communities. The generic research concerns being addressed within the communities are associated with the concepts of product-service differentiation, competitive strategy, customer value, customer relationships and product-service configuration. Originality/value: This research has further developed and articulated the identities of distinct researcher communities actively contributing to knowledge production in the servitization of manufacturing, and to what extent they are pursuing common research agendas. This study provides an improved descriptive and thematic awareness of the resulting body of knowledge, allowing the field of servitization to progress in a more informed and multidisciplinary fashion. © Emerald Group Publishing Limited.

Design and designing:a critical introduction

Design and Designing provides a broad and critical understanding of what is essentially a practical subject. Designing today is less a craft and more a part of the knowledge economy. It's all about knowing how to acquire knowledge and how to apply it creatively. Design and Designing covers the design process, modelling and drawing, working with clients, production and consumption, sustainability, professional practice and design futures. Chapters are written by expert teachers and practitioners from around the globe, each presenting an accessible and engaging overview of their field of design. Every chapter is highly illustrated with a combination of images and information boxes, which extend or highlight key material. Each section concludes with a design project, a hands-on activity for the reader. Design and Designing covers the full spectrum of design types, from graphic communication to product design, from fashion to games design, setting every type in its aesthetic, ethical and social contexts. With this essential book, readers will learn from today's best practice and best thinking in design, they will develop a critical sense, and become the designers of tomorrow.

High-throughput manufacturing of size-tuned liposomes by a new microfluidics method using enhanced statistical tools for characterization

Microfluidics has recently emerged as a new method of manufacturing liposomes, which allows for reproducible mixing in miliseconds on the nanoliter scale. Here we investigate microfluidics-based manufacturing of liposomes. The aim of these studies was to assess the parameters in a microfluidic process by varying the total flow rate (TFR) and the flow rate ratio (FRR) of the solvent and aqueous phases. Design of experiment and multivariate data analysis were used for increased process understanding and development of predictive and correlative models. High FRR lead to the bottom-up synthesis of liposomes, with a strong correlation with vesicle size, demonstrating the ability to in-process control liposomes size; the resulting liposome size correlated with the FRR in the microfluidics process, with liposomes of 50 nm being reproducibly manufactured. Furthermore, we demonstrate the potential of a high throughput manufacturing of liposomes using microfluidics with a four-fold increase in the volumetric flow rate, maintaining liposome characteristics. The efficacy of these liposomes was demonstrated in transfection studies and was modelled using predictive modeling. Mathematical modelling identified FRR as the key variable in the microfluidic process, with the highest impact on liposome size, polydispersity and transfection efficiency. This study demonstrates microfluidics as a robust and high-throughput method for the scalable and highly reproducible manufacture of size-controlled liposomes. Furthermore, the application of statistically based process control increases understanding and allows for the generation of a design-space for controlled particle characteristics.

Intellectual property activity by service sector and manufacturing firms in the United Kingdom, 1996-2000

This paper provides evidence from a newly constructed database of UK firms about the extent of their intellectual property acquisition activities over five years. We focus on service sector firms, which have not previously been studied, with comparisons for firms in manufacturing and other sectors, such as agriculture. The measures of IP include both trade marks, which are most important in services, and patents, which are predominantly sought by manufacturing firms. The analysis includes patents and trade marks applied for via both the UK and European routes. While IP assets sought through the UK Patent Office remained strong, more services firms were seeking European Community trade marks and more manufacturing firms were seeking patents via European Patent Office through time. Firm characteristics that are positively correlated with IP activity include larger firm size, stock market listed status and high product market diversification.

Does audit improve quality in a hospital manufacturing unit?

OBJECTIVE - To establish whether auditing improves the overall quality of a hospital manufacturing unit. DESIGN - Continuous assessment of the quality level of a hospital manufacturing unit using 14 quality indicators over a nine-month period, and two periods of audit carried out towards the beginning and end of the assessment period. SETTING - The non-sterile manufacturing, sterile manufacturing and repackaging services areas at the pharmacy manufacturing unit at Queens Hospital, Burton-on- Trent. RESULTS - Compliance ratings for the second audit were better than those for the first audit, but there was no overall improvement in quality over the study period. CONCLUSION - Auditing probably improves compliance by focusing the minds of the staff involved, rather than by initiating a sustained improvement in overall quality.

Managing enterprise resource planning and multi-organisational enterprise governance:a new contingency framework for the enterprisation of operations

This research has been undertaken to determine how successful multi-organisational enterprise strategy is reliant on the correct type of Enterprise Resource Planning (ERP) information systems being used. However there appears to be a dearth of research as regards strategic alignment between ERP systems development and multi-organisational enterprise governance as guidelines and frameworks to assist practitioners in making decision for multi-organisational collaboration supported by different types of ERP systems are still missing from theoretical and empirical perspectives. This calls for this research which investigates ERP systems development and emerging practices in the management of multi-organisational enterprises (i.e. parts of companies working with parts of other companies to deliver complex product-service systems) and identify how different ERP systems fit into different multi-organisational enterprise structures, in order to achieve sustainable competitive success. An empirical inductive study was conducted using the Grounded Theory-based methodological approach based on successful manufacturing and service companies in the UK and China. This involved an initial pre-study literature review, data collection via 48 semi-structured interviews with 8 companies delivering complex products and services across organisational boundaries whilst adopting ERP systems to support their collaborative business strategies – 4 cases cover printing, semiconductor manufacturing, and parcel distribution industries in the UK and 4 cases cover crane manufacturing, concrete production, and banking industries in China in order to form a set of 29 tentative propositions that have been validated via a questionnaire receiving 116 responses from 16 companies. The research has resulted in the consolidation of the validated propositions into a novel concept referred to as the ‘Dynamic Enterprise Reference Grid for ERP’ (DERG-ERP) which draws from multiple theoretical perspectives. The core of the DERG-ERP concept is a contingency management framework which indicates that different multi-organisational enterprise paradigms and the supporting ERP information systems are not the result of different strategies, but are best considered part of a strategic continuum with the same overall business purpose of multi-organisational cooperation. At different times and circumstances in a partnership lifecycle firms may prefer particular multi-organisational enterprise structures and the use of different types of ERP systems to satisfy business requirements. Thus the DERG-ERP concept helps decision makers in selecting, managing and co-developing the most appropriate multi-organistional enterprise strategy and its corresponding ERP systems by drawing on core competence, expected competitiveness, and information systems strategic capabilities as the main contingency factors. Specifically, this research suggests that traditional ERP(I) systems are associated with Vertically Integrated Enterprise (VIE); whilst ERPIIsystems can be correlated to Extended Enterprise (EE) requirements and ERPIII systems can best support the operations of Virtual Enterprise (VE). The contribution of this thesis is threefold. Firstly, this work contributes to a gap in the extant literature about the best fit between ERP system types and multi-organisational enterprise structure types; and proposes a new contingency framework – the DERG-ERP, which can be used to explain how and why enterprise managers need to change and adapt their ERP information systems in response to changing business and operational requirements. Secondly, with respect to a priori theoretical models, the new DERG-ERP has furthered multi-organisational enterprise management thinking by incorporating information system strategy, rather than purely focusing on strategy, structural, and operational aspects of enterprise design and management. Simultaneously, the DERG-ERP makes theoretical contributions to the current IS Strategy Formulation Model which does not explicitly address multi-organisational enterprise governance. Thirdly, this research clarifies and emphasises the new concept and ideas of future ERP systems (referred to as ERPIII) that are inadequately covered in the extant literature. The novel DERG-ERP concept and its elements have also been applied to 8 empirical cases to serve as a practical guide for ERP vendors, information systems management, and operations managers hoping to grow and sustain their competitive advantage with respect to effective enterprise strategy, enterprise structures, and ERP systems use; referred to in this thesis as the “enterprisation of operations”.

Analysis and design of power management scheme for an on-board solar energy storage system

This paper investigates the power management issues in a mobile solar energy storage system. A multi-converter based energy storage system is proposed, in which solar power is the primary source while the grid or the diesel generator is selected as the secondary source. The existence of the secondary source facilitates the battery state of charge detection by providing a constant battery charging current. Converter modeling, multi-converter control system design, digital implementation and experimental verification are introduced and discussed in details. The prototype experiment indicates that the converter system can provide a constant charging current during solar converter maximum power tracking operation, especially during large solar power output variation, which proves the feasibility of the proposed design. © 2014 IEEE.

Manufacturing reshoring and its limits:the UK automotive case

This paper explores the meaning of reshoring and its drivers in the case of UK manufacturing and in particular its automotive sector. Drawing on interviews, policy reviews and a range of recent surveys, the paper finds that while reshoring is a discernable trend in UK manufacturing, it is less pronounced than many have claimed and that – in the UK case at least - there are severe limits as to how far this reshoring trend can go, particularly in relation to the availability of skills and finance in the supply chain. This is in turn raises questions over the stance of British policy and whether more could be done, with comparisons made to US experience.

Do manufacturing firms need informality in ERP post-implementation? A study of Chinese manufacturing sites

Purpose - Enterprise resource planning (ERP) systems are limited due to their operation around a fixed design production process and a fixed lead time to production plan and purchasing plan. The purpose of this paper is to define the concept of informality and to describe the notion of a system combining informality and ERP systems, based on empirical research from four manufacturing case studies. Design/methodology/approach - The case studies present a range of applications of ERP and are analysed in terms of the three characteristics of informality, namely, organisation structure, communication method and leadership approach. Findings - The findings suggest that systems consisting of informality in combination with ERP systems can elicit knowledge fromfrontlineworkers leading to timely improvements in the system. This is achieved by allowing users to modify work procedures or production orders, and to support collaborative working among all employees. However it was found that informality is not required for manufacturers with a relatively stable environment who can deal with uncertainty with a proactive strategy. Research limitations/implications - This study was carried out in China, with four companies as unit of analysis. Future work can help to extend this study across countries. Originality/value - The use of Four dimensions of informality that relate to manufacturers implementing ERP are defined as "technology in practice", "user flexibility", "trusted human networks" and "positive reaction to uncertainty". This is a new construct not applied before to ERP implementations.