TINSEL – a web-based intelligent tutoring system on electrical installation design

This paper presents a project consisting on the development of an Intelligent Tutoring System, for training and support concerning the development of electrical installation projects to be used by electrical engineers, technicians and students. One of the major goals of this project is to devise a teaching model based on Intelligent Tutoring techniques, considering not only academic knowledge but also other types of more empirical knowledge, able to achieve successfully the training of electrical installation design.

Addressing the facilities layout design problem through constraint logic programming

One of the most difficult problems that face researchers experimenting with complex systems in real world applications is the Facility Layout Design Problem. It relies with the design and location of production lines, machinery and equipment, inventory storage and shipping facilities. In this work it is intended to address this problem through the use of Constraint Logic Programming (CLP) technology. The use of Genetic Algorithms (GA) as optimisation technique in CLP environment is also an issue addressed. The approach aims the implementation of genetic algorithm operators following the CLP paradigm.

An intelligent tutoring approach to support students and technicians in electrical installation design

Designing electric installation projects, demands not only academic knowledge, but also other types of knowledge not easily acquired through traditional instructional methodologies. A lot of additional empirical knowledge is missing and so the academic instruction must be completed with different kinds of knowledge, such as real-life practical examples and simulations. On the other hand, the practical knowledge detained by the most experienced designers is not formalized in such a way that is easily transmitted. In order to overcome these difficulties present in the engineers formation, we are developing an Intelligent Tutoring System (ITS), for training and support concerning the development of electrical installation projects to be used by electrical engineers, technicians and students.

Contexts-management strategy in considering the security in urban computing based on urban design

Urban Computing (UrC) provides users with the situation-proper information by considering context of users, devices, and social and physical environment in urban life. With social network services, UrC makes it possible for people with common interests to organize a virtual-society through exchange of context information among them. In these cases, people and personal devices are vulnerable to fake and misleading context information which is transferred from unauthorized and unauthenticated servers by attackers. So called smart devices which run automatically on some context events are more vulnerable if they are not prepared for attacks. In this paper, we illustrate some UrC service scenarios, and show important context information, possible threats, protection method, and secure context management for people.

BASS 4: a software system for ergonomic design and evaluation of working hours

OBJECTIVE: To extend an existing computer programme for the evaluation and design of shift schedules (BASS 3) by integrating workload as well as economic aspects. METHODS: The redesigned prototype BASS 4 includes a new module with a suitable and easily applicable screening method (EBA) for the assessment of the intensity of physical, emotional and cognitive workload components and their temporal patterns. Specified criterion functions based on these ratings allow for an adjustment of shift and rest duration according to the intensity of physical and mental workload. Furthermore, with regard to interactive effects both workload and temporal conditions, e.g. time of day, are taken into account. In a second new module, important economic aspects and criteria have been implemented. Different ergonomic solutions for scheduling problems can now also be evaluated with regard to their economic costs. RESULTS: The new version of the computer programme (BASS 4) can now simultaneously take into account numerous ergonomic, legal, agreed and economic criteria for the design and evaluation of working hours. CONCLUSIONS: BASS 4 can now be used as an instrument for the design and the evaluation of working hours with regard to legal, ergonomic and economic aspects at the shop floor as well as in administrative (e.g. health and safety inspection) and research problems.

Optical Filter Design Using Background Wavelength Processing Techniques

Amorphous SiC tandem heterostructures are used to filter a specific band, in the visible range. Experimental and simulated results are compared to validate the use of SiC multilayered structures in applications where gain compensation is needed or to attenuate unwanted wavelengths. Spectral response data acquired under different frequencies, optical wavelength control and side irradiations are analyzed. Transfer function characteristics are discussed. Color pulsed communication channels are transmitted together and the output signal analyzed under different background conditions. Results show that under controlled wavelength backgrounds, the device sensitivity is enhanced in a precise wavelength range and quenched in the others, tuning or suppressing a specific band. Depending on the background wavelength and irradiation side, the device acts either as a long-, a short-, or a band-rejection pass filter. An optoelectronic model supports the experimental results and gives insight on the physics of the device.

Optimal design for active damping in sandwich structures using the Direct MultiSearch method

This paper addresses the problem of optimal positioning of surface bonded piezoelectric patches in sandwich plates with viscoelastic core and laminated face layers. The objective is to maximize a set of modal loss factors for a given frequency range using multiobjective topology optimization. Active damping is introduced through co-located negative velocity feedback control. The multiobjective topology optimization problem is solved using the Direct MultiSearch Method. An application to a simply supported sandwich plate is presented with results for the maximization of the first six modal loss factors. The influence of the finite element mesh is analyzed and the results are, to some extent, compared with those obtained using alternative single objective optimization. (C) 2013 Elsevier Ltd. All rights reserved.

Demand response in future power systems management – a conceptual framework and simulation tool

Mestrado em Engenharia Electrotécnica – Sistemas Eléctricos de Energia

Design of a Multiband Full-Rate Ultra-Wideband Receiver in FPGA

MultiBand OFDM (MB-OFDM) UWB [1] is a short-range promising wireless technology for high data rate communications up to 480 Mbps. In this paper, we have designed and implemented in an Virtex-6 FPGA an MB-OFDM UWB receiver for the highest data rate of 480 Mbps. To test the system, we have also implemented an MB-OFDM transmitter and an AWGN generator in VHDL and determined the bit error rates at the receiver running in an FPGA.

Design and performance of a novel low-density parity-check code for distributed video coding

Low-density parity-check (LDPC) codes are nowadays one of the hottest topics in coding theory, notably due to their advantages in terms of bit error rate performance and low complexity. In order to exploit the potential of the Wyner-Ziv coding paradigm, practical distributed video coding (DVC) schemes should use powerful error correcting codes with near-capacity performance. In this paper, new ways to design LDPC codes for the DVC paradigm are proposed and studied. The new LDPC solutions rely on merging parity-check nodes, which corresponds to reduce the number of rows in the parity-check matrix. This allows to change gracefully the compression ratio of the source (DCT coefficient bitplane) according to the correlation between the original and the side information. The proposed LDPC codes reach a good performance for a wide range of source correlations and achieve a better RD performance when compared to the popular turbo codes.

Avaliação estratégica de relações públicas em tecnologias de consumo: a Sony Ericsson e o Estoril Open

O relatório que se segue desenvolveu-se em torno das conclusões retiradas relativamente à eficácia da estratégia de comunicação da Sony Ericsson que terminou com uma acção específica no Estoril Open. Para a realização deste estudo definiram-se os objectivos que guiaram o Estágio, assentes no desenho e descrição da estratégia desenvolvida para o evento, de forma a avaliar os resultados que essa estratégia obteve. O Estágio foi realizado na Tinkle, a consultora de comunicação que trabalha com a Sony Ericsson. Para a realização da estratégia foi tido em conta o Ciclo de Vida da Adopção de Tecnologias de Moore (2002), assumindo que a Sony Ericsson opera principalmente num Mercado Maioritário, onde está presente a Maioria Inicial. A estratégia teve assim como principal objectivo o reconhecimento, a associação da marca ao ténis feminino, a aproximação a um público específico e a apresentação dos equipamentos recentes. A avaliação estratégica desenvolveu-se com as ferramentas de Output, Outtake e Outcome. Aqui destaca-se a dificuldade em medir o Outcome, assim como a medição do Outtake que também fora limitada devido aos critérios escolhidos. As dificuldades na avaliação da estratégia estiveram assim intimamente relacionadas com a falta de uma definição de objectivos claros em termos de Outcome e Outtake, mas também com a falta de critérios de medição de Output. Por fim, resta salientar a importância da continuidade deste estudo em futuras investigações para se concluir objectivamente sobre a activação da Sony Ericsson em Portugal, relativamente ao ténis feminino.

Formação em Universal Design for Learning

Na qualidade de Diretora Regional das Comunidades, fomos responsável pela redação dos artigos e coordenação da página "Comunidades", integrada no jornal Açoriano Oriental, servindo a mesma para a divulgação das atividades realizadas pela Direção Regional Das Comunidades do Governo dos Açores.

Açores recebe Congresso Internacional de Universal Design for Learning

Na qualidade de Diretora Regional das Comunidades, fomos responsável pela redação dos artigos e coordenação da página "Comunidades Açorianas no Mundo", integrada no jornal Mundo Português, servindo a mesma para a divulgação das atividades realizadas pela Direção Regional Das Comunidades do Governo dos Açores.

Patrocínio: influência na atitude relativamente à marca e intenção de compra: caso Nike e selecção portuguesa de futebol

Devido à enorme importância que tem sido atribuída ao desporto nas últimas décadas, os marketers abraçam agora totalmente o facto de uma campanha integrada de patrocínio desportivo poder atingir um imensurável número de benefícios. Na verdade, apesar das empresas se comprometerem hoje com muitas outras áreas como a cultura, caridade e domínios humanitários, o desporto continua a ser o campo mais requisitado no que ao patrocínio se refere. Para muitas organizações o patrocínio desportivo é, de facto, o elemento-chave de uma comunicação integrada de marketing. Devido então a todo este enfase dado ao desporto, decidimos verificar se a relação de patrocínio entre a marca Nike e a Selecção Portuguesa de Futebol (SPF) influencia a atitude relativamente à marca e a intenção de compra dos seus produtos, o que constitui o objectivo desta investigação. Assim, tendo como ponto de partida a questão: exercerá a relação de patrocínio entre a Nike e a SPF alguma influência na atitude relativamente à marca e sua intenção de compra? E, por meio de uma revisão da literatura referente a este tema, desenvolvemos um modelo conceptual, o qual é baseado no criado por Martensen et al (2007) e integra quatro principais conceitos: envolvimento, atitudes, intenção de compra e congruência entre a marca e o evento. O presente estudo emprega um design exploratório envolvendo uma colecta de dados quantitativos, através da aplicação de um questionário online. De modo a confirmarmos o modelo proposto, duas técnicas estatísticas foram utilizadas: análise factorial e análise de equações estruturais (AEE). As conclusões desta investigação podem fornecer directivas para a compreensão de como uma relação de patrocínio pode criar ou melhorar a atitude relativamente a uma marca e sua intenção de compra. Como principal resultado, podemos destacar a existência de uma influência positiva da relação de patrocínio na atitude relativamente à marca.

Reasserting curriculum design through virtual learning environments : The case of MAPE

II European Conference on Curriculum Studies. "Curriculum studies: Policies, perspectives and practices”. Porto, FPCEUP, October 16th - 17th.