(Table 2) Trace element composition of seleceted clast and matrix materials from ODP Site 125-786

Shipboard examination of volcanic and sedimentary strata at Site 786 suggested that at least four types of breccias are present: flow-top breccias, associated with cooling and breakup on the upper surface of lava flows; autobreccias, formed by in-situ alteration at the base of flows; fault-gouge breccias; and true sedimentary breccias derived from weathering and erosion of underlying flows. It is virtually impossible to assess the origin of breccia matrix by textural and mineralogical analyses alone. However, it is fundamental for our understanding of breccia provenance to determine the source component of the matrix material. Whether the matrix is uniquely clastderived can be determined by geochemical fingerprinting. Trace elements that are immobile during weathering and alteration do not change their relative abundances. A contribution to the matrix from any source with an immobile trace element signature different from that of the clasts would appear as a perturbation of the trace element signature of the matrix. Trace element analysis of bulk samples from clasts and matrix material in individual breccia units was undertaken in a fashion similar to that used by Brimhall and Dietrich (1987, doi:10.1016/0016-7037(87)90070-6) in analyzing soil provenance: (1) to help distinguish between sedimentary and volcanic breccias, (2) to determine the degree of mixing and depth of erosion in sedimentary breccias, and (3) to analyze the local provenance of the individual breccia components (matrix and clasts). The following elements were analyzed by X-ray fluorescence (XRF): Rb, Sr, Ba, U, Zr, Cu, Zn, Ti, Cr, and V. Of these elements, Zr and Ti probably exhibit truly immobile behavior (Humphris and Thompson, 1978, doi:10.1016/0016-7037(78)90222-3 ). The remaining elements are useful as a reference for the extent of compositional change during the formation of matrix material (Brimhall and Dietrich, 1987, doi:10.1016/0016-7037(87)90070-6).

(Table 2) Chemical composition of quenched glasses from the Mohns and Knipovich Ridges

The aim of this project was a petrogeochemical study of igneous rocks in the areas of the Mohns and Knipovich Ridges, both being the northern extensions of the Mid-Atlantic Ridge (MAR), using data available for quenching glass samples collected during Cruises 36 and 38 of R/V Akademic Mstislav Keldysh and during Cruise 15 of R/V Professor Logachev. Results of igneous rock studying from the Mohns and Knipovich Ridges at the background of evolution of the total North Atlantic Province, which had been identified earlier from tectonic and geophysical data, showed that igneous rocks of the Knipovich Ridge can be ranked as shallow tholeiites, primary melts of which were relatively rich in Na and Si and poor in Fe. This type of magma is characteristic of colder regions of the oceanic lithosphere. Its occurrence in the Knipovich Ridge and its potential propagation up to the Gakkel Ridge suggest that igneous rocks of this region originated under conditions of passive spreading in contrast to the MAR region in vicinity of Iceland and Azores, where substantial contribution of hotter material of a rising plume contributed to formation of the oceanic crust. The North Atlantic Ocean is the youngest province in terms of ocean-floor opening. Geologically and geophysically it is one of well studied regions of the World Ocean. Nevertheless some basic key items of its origin still remain to be clarified. In 1975 Scatler et al. proved specifics of this region manifested in growth of the gravity field, and also in relative height of the ocean floor in the region of 33-70°N, which was associated by them with rise of the hotter mantle, as compared with common regions of the Mid-Atlantic Ridge. Later this view was confirmed by character of magmatism, which differed in depth of generation and by melting degree of the resulting primary magma. Uniqueness of the North Atlantic region was also proved by the fact that this region was marked by extensive geochemical anomalies associated with Azores, Iceland, and Jan Mayen. All of these data allow to consider the northern part of the MAR (north of 33°N) as an united global geotectonic province. The Mohns and Knipovich Ridges located north of Iceland locate at the northern end of this province. This is the least known region. Therefore, new data for ridge areas of 73-77°N are needed for more complete geologic history of the Arctic Basin. The aim of this study was to carry out a complex comparison of magmatism at the Mohns and Knipovich Ridges with magmatism at large segments of the MAR northern province and to reconstruct mechanisms of primary magma formation, as well as conditions of their fractionation. This paper was based on results of studying quenched glasses, which reflect evolution of melt in the course of its formation.

Isotopic geochemistry of granitoids in the Jinshajiang suture zone, SW China

The Jinshajiang suture zone, located in the eastern part of the Tethyan tectonic domain, is noticeable for a large-scale distribution of Late Jurassic to Triassic granitoids. These granitoids were genetically related to the evolution of the Paleo-Tethys Ocean. The Beiwu, Linong and Lunong granitoids occur in the middle zone of the Jinshajiang Suture Zone, and possess similar geochemical features, indicating they share a common magma source. SIMS zircon U-Pb dating reveals the Beiwu, Linong and Lunong granitic intrusions were emplaced at 233.9±1.4 Ma (2 sigma), 233.1 ±1.4 Ma (2 sigma) and 231.0±1.6 Ma (2 sigma), respectively. All of these granitoids are enriched in abundances of Si (SiO2 =65.2-73.5 wt.%), and large-ion-lithophile-elements (LILEs), but depleted in high-field-strength-elements contents (HFSEs, e.g., Nb, Ta, Ti). In addition, they have low P2O5 contents (0.06-0.11 wt.%), A/CNK values ([molecular Al2O3/(CaO+Na2O+K2O)], mostly<1.1) and 10000Ga/Al ratios (1.7-2.2), consistent with the characteristics of I-type granites. In terms of isotopic compositions, these granitoids have high initial 87Sr/86Sr ratios (0.7078-0.7148), Pb isotopic compositions [(206Pb/204Pb)t=18.213-18.598, (207Pb/204Pb)t=15.637-15.730 and (208Pb/204Pb)t=38.323-38.791], zircon d18O values (7. per mil-9.3 per mil) and negative eNd(t) values (-5.1 to -6.7), suggesting they were predominantly derived from the continental crust. Their Nb/Ta ratios (average value=8.6) are consistent with those of the lower continental crust (LCC). However, variable ?Hf(t) values (-8.6 to +2.8) and the occurrences of mafic microgranular enclaves (MMEs) suggest that mantle-derived melts and lower crustal magmas were involved in the generation of these granitoids. Moreover, the high Pb isotopic ratios and elevated zircon d18O values of these rocks indicate a significant contribution of the upper crustal composition. We propose a model in which the Beiwu, Linong and Lunong granitoids were generated under a late collisional or post-collisional setting. It is possible that this collision was completed before Late Triassic. Decompression induced mantle-derived magmas underplated and provided the heat for the anatexis of the crust. Hybrid melts including mantle-derived and the lower crustal magmas were then generated. The hybrid melts thereafter ascended to a shallow depth and resulted in some degree of sedimentary rocks assimilation. Such three-component mixing magmas source and subsequent fractional crystallization could be responsible for the formation of the Beiwu, Linong and Lunong granitoids.

Mineralogical and isotopic compositions of ODP Hole 107-650A

Red-brown dolomitic claystones overlay the Marsili Basin basaltic basement at ODP Site 650. Sequential leaching experiments reveal that most of the elements considered to have a hydrothermal or hydrogenous origin in a marine environment, such as Fe, Cu, Zn, Pb, Co, Ni, are present mainly in the aluminosilicate fraction of the dolomitic claystones. Their vertical distribution, content and partitioning chemistry of trace elements, and REE patterns suggest enhanced terrigenous input during dolomite formation, but no significant hydrothermal influence from the underlying basaltic basement. Positive correlations in the C and O isotopes in the dolomites reflect complex conditions during the dolomitization. The stable isotopes can be controlled in part by temperature variations during the dolomitization. Majority of the samples, however, form a trend that is steeper than expected for only temperature control on the C and O isotopes. The latter indicates possible isotopic heterogeneity in the proto-carbonate that can be related to arid climatic conditions during the formation of the basal dolomitic claystones. In addition, the dolostones stable isotopic characteristics can be influenced by diagenetic release of heavier delta18O from clay dehydration and/or alteration of siliciclastic material. Strontium and Pb isotopic data reveal that the non-carbonate fraction, the "dye" of the dolomitic claystones, is controlled by Saharan dust (75%-80%) and by material with isotopic characteristics similar to the Aeolian Arc volcanoes (20%-25%). The non-carbonate fraction of the calcareous ooze overlying the dolomitic claystones has a Sr and Pb isotopic composition identical to that of the dolomitic claystones, indicating that no change in the input sources to the sedimentary basin occurred during and after the dolomitization event. Combination of climato-tectonic factors most probably resulted in suitable conditions for dolomitization in the Marsili and the nearby Vavilov Basins. The basal dolomitic claystone sequence was formed at the initiation of the opening of the Marsili Basin (~2 Ma), which coincided with the consecutive glacial stage. The glaciation caused arid climate and enhanced evaporation that possibly contributed to the stable isotope variations in the proto-carbonate. The conductive cooling of the young lithosphere produced high heat flow in the region, causing low-temperature passive convection of pore waters in the basal calcareous sediment. We suggest that this pumping process was the major dolomitization mechanism since it is capable of driving large volumes of seawater (the source of Mg2+) through the sediment. The red-brown hue of the dolomitic claystones is terrigenous contribution of the glacially induced high eolian influx and was not hydrothermally derived from the underlying basaltic basement. The detailed geochemical investigation of the basal dolomitic sequence indicates that the dolomitization was most probably related to complex tectono-climatic conditions set by the initial opening stages of the Marsili Basin and glaciation.

Magnetic properties of ODP Hole 109-648B

Seventeen samples from pillow or massive "zero age" fresh basalts from ODP Legs 106 and 109 were studied in order to examine their magnetic properties and oxidation degree. Thermomagnetic analyses of studied samples show Curie temperatures from 127°C to 220°C with reversible heating and cooling curves. Hysteresis parameters indicate the contribution of large Pseudo-Single Domain (PSD) grain of titanomagnetites with saturation magnetization between 0.4 and 0.7 emu/g which is almost twice that those of other recent mid-oceanic dredged basalts (e.g., FAMOUS and CYAMEX-RISE). The large grain sizes and higher magnetic mineral concentration may suggest a slower cooling of these basalts compared to those previously studied. Electron microprobe analyses of titanomagnetite grains combined with Curie point determinations give z = 0.3 for the degree of low temperature oxidation, which is close to the other values reported for low temperature oxidation of mid-oceanic ridge basalts.

Probability sampling protocol of classification maps from spaceborne/airborne image

To deliver sample estimates provided with the necessary probability foundation to permit generalization from the sample data subset to the whole target population being sampled, probability sampling strategies are required to satisfy three necessary not sufficient conditions: (i) All inclusion probabilities be greater than zero in the target population to be sampled. If some sampling units have an inclusion probability of zero, then a map accuracy assessment does not represent the entire target region depicted in the map to be assessed. (ii) The inclusion probabilities must be: (a) knowable for nonsampled units and (b) known for those units selected in the sample: since the inclusion probability determines the weight attached to each sampling unit in the accuracy estimation formulas, if the inclusion probabilities are unknown, so are the estimation weights. This original work presents a novel (to the best of these authors' knowledge, the first) probability sampling protocol for quality assessment and comparison of thematic maps generated from spaceborne/airborne Very High Resolution (VHR) images, where: (I) an original Categorical Variable Pair Similarity Index (CVPSI, proposed in two different formulations) is estimated as a fuzzy degree of match between a reference and a test semantic vocabulary, which may not coincide, and (II) both symbolic pixel-based thematic quality indicators (TQIs) and sub-symbolic object-based spatial quality indicators (SQIs) are estimated with a degree of uncertainty in measurement in compliance with the well-known Quality Assurance Framework for Earth Observation (QA4EO) guidelines. Like a decision-tree, any protocol (guidelines for best practice) comprises a set of rules, equivalent to structural knowledge, and an order of presentation of the rule set, known as procedural knowledge. The combination of these two levels of knowledge makes an original protocol worth more than the sum of its parts. The several degrees of novelty of the proposed probability sampling protocol are highlighted in this paper, at the levels of understanding of both structural and procedural knowledge, in comparison with related multi-disciplinary works selected from the existing literature. In the experimental session the proposed protocol is tested for accuracy validation of preliminary classification maps automatically generated by the Satellite Image Automatic MapperT (SIAMT) software product from two WorldView-2 images and one QuickBird-2 image provided by DigitalGlobe for testing purposes. In these experiments, collected TQIs and SQIs are statistically valid, statistically significant, consistent across maps and in agreement with theoretical expectations, visual (qualitative) evidence and quantitative quality indexes of operativeness (OQIs) claimed for SIAMT by related papers. As a subsidiary conclusion, the statistically consistent and statistically significant accuracy validation of the SIAMT pre-classification maps proposed in this contribution, together with OQIs claimed for SIAMT by related works, make the operational (automatic, accurate, near real-time, robust, scalable) SIAMT software product eligible for opening up new inter-disciplinary research and market opportunities in accordance with the visionary goal of the Global Earth Observation System of Systems (GEOSS) initiative and the QA4EO international guidelines.

Allocation efficiency in China : an extension of the dynamic Olley-Pakes productivity decomposition

This paper develops a quantitative measure of allocation efficiency, which is an extension of the dynamic Olley-Pakes productivity decomposition proposed by Melitz and Polanec (2015). The extended measure enables the simultaneous capture of the degree of misallocation within a group and between groups and parallel to capturing the contribution of entering and exiting firms to aggregate productivity growth. This measure empirically assesses the degree of misallocation in China using manufacturing firm-level data from 2004 to 2007. Misallocation among industrial sectors has been found to increase over time, and allocation efficiency within an industry has been found to worsen in industries that use more capital and have firms with relatively higher state-owned market shares. Allocation efficiency among three ownership sectors (state-owned, domestic private, and foreign sectors) tends to improve in industries wherein the market share moves from a less-productive state-owned sector to a more productive private sector.

A new way of teaching different subjects in a foreign language in the Building Engineering Degree at the Universidad Politécnica.

The European Union has been promoting linguistic diversity for many years as one of its main educational goals. This is an element that facilitates student mobility and student exchanges between different universities and countries and enriches the education of young undergraduates. In particular, a higher degree of competence in the English language is becoming essential for engineers, architects and researchers in general, as English has become the lingua franca that opens up horizons to internationalisation and the transfer of knowledge in today’s world. Many experts point to the Integrated Approach to Contents and Foreign Languages System as being an option that has certain benefits over the traditional method of teaching a second language that is exclusively based on specific subjects. This system advocates teaching the different subjects in the syllabus in a language other than one’s mother tongue, without prioritising knowledge of the language over the subject. This was the idea that in the 2009/10 academic year gave rise to the Second Language Integration Programme (SLI Programme) at the Escuela Arquitectura Técnica in the Universidad Politécnica Madrid (EUATM-UPM), just at the beginning of the tuition of the new Building Engineering Degree, which had been adapted to the European Higher Education Area (EHEA) model. This programme is an interdisciplinary initiative for the set of subjects taught during the semester and is coordinated through the Assistant Director Office for Educational Innovation. The SLI Programme has a dual goal; to familiarise students with the specific English terminology of the subject being taught, and at the same time improve their communication skills in English. A total of thirty lecturers are taking part in the teaching of eleven first year subjects and twelve in the second year, with around 120 students who have voluntarily enrolled in a special group in each semester. During the 2010/2011 academic year the degree of acceptance and the results of the SLI Programme have been monitored. Tools have been designed to aid interdisciplinary coordination and to analyse satisfaction, such as coordination records and surveys. The results currently available refer to the first and second year and are divided into specific aspects of the different subjects involved and into general aspects of the ongoing experience.

Comparison of dynamic effects of high-speed traffic load on ballasted track using a simplified two-dimensional and full three-dimensional model.

The vertical dynamic actions transmitted by railway vehicles to the ballasted track infrastructure is evaluated taking into account models with different degree of detail. In particular, we have studied this matter from a two-dimensional (2D) finite element model to a fully coupled three-dimensional (3D) multi-body finite element model. The vehicle and track are coupled via a non-linear Hertz contact mechanism. The method of Lagrange multipliers is used for the contact constraint enforcement between wheel and rail. Distributed elevation irregularities are generated based on power spectral density (PSD) distributions which are taken into account for the interaction. The numerical simulations are performed in the time domain, using a direct integration method for solving the transient problem due to the contact nonlinearities. The results obtained include contact forces, forces transmitted to the infrastructure (sleeper) by railpads and envelopes of relevant results for several track irregularities and speed ranges. The main contribution of this work is to identify and discuss coincidences and differences between discrete 2D models and continuum 3D models, as wheel as assessing the validity of evaluating the dynamic loading on the track with simplified 2D models

Band gap control via tuning of inversion degree in CdIn2S4 spinel

Based on theoretical arguments, we propose a possible route for controlling the band-gap in the promising photovoltaic material CdIn2S4. Our ab initio calculations show that the experimental degree of inversion in this spinel (fraction of tetrahedral sites occupied by In) corresponds approximately to the equilibrium value given by the minimum of the theoretical inversion free energy at a typical synthesis temperature. Modification of this temperature, or of the cooling rate after synthesis, is then expected to change the inversion degree, which in turn sensitively tunes the electronic band-gap of the solid, as shown here by screened hybrid functional calculations.

Stability Analysis of Teleoperation System by State Convergence with Variable Time Delay

We propose a novel control scheme for bilateral teleoperation of n degree-of-freedom (DOF) nonlinear robotic systems with time-varying communication delay. A major contribution from this work lies in the demonstration that the structure of a state convergence algorithm can be also applied to nth-order nonlinear teleoperation systems. By choosing a Lyapunov Krasovskii functional, we show that the local-remote teleoperation system is asymptotically stable. The time delay of communication channel is assumed to be unknown and randomly time varying, but the upper bounds of the delay interval and the derivative of the delay are assumed to be known.

Nonlinear seismic behaviour of concrete arch bridges

Arch bridge structural solution has been known for centuries, in fact the simple nature of arch that require low tension and shear strength was an advantage as the simple materials like stone and brick were the only option back in ancient centuries. By the pass of time especially after industrial revolution, the new materials were adopted in construction of arch bridges to reach longer spans. Nowadays one long span arch bridge is made of steel, concrete or combination of these two as "CFST", as the result of using these high strength materials, very long spans can be achieved. The current record for longest arch belongs to Chaotianmen bridge over Yangtze river in China with 552 meters span made of steel and the longest reinforced concrete type is Wanxian bridge which also cross the Yangtze river through a 420 meters span. Today the designer is no longer limited by span length as long as arch bridge is the most applicable solution among other approaches, i.e. cable stayed and suspended bridges are more reasonable if very long span is desired. Like any super structure, the economical and architectural aspects in construction of a bridge is extremely important, in other words, as a narrower bridge has better appearance, it also require smaller volume of material which make the design more economical. Design of such bridge, beside the high strength materials, requires precise structural analysis approaches capable of integrating the combination of material behaviour and complex geometry of structure and various types of loads which may be applied to bridge during its service life. Depend on the design strategy, analysis may only evaluates the linear elastic behaviour of structure or consider the nonlinear properties as well. Although most of structures in the past were designed to act in their elastic range, the rapid increase in computational capacity allow us to consider different sources of nonlinearities in order to achieve a more realistic evaluations where the dynamic behaviour of bridge is important especially in seismic zones where large movements may occur or structure experience P - _ effect during the earthquake. The above mentioned type of analysis is computationally expensive and very time consuming. In recent years, several methods were proposed in order to resolve this problem. Discussion of recent developments on these methods and their application on long span concrete arch bridges is the main goal of this research. Accordingly available long span concrete arch bridges have been studied to gather the critical information about their geometrical aspects and properties of their materials. Based on concluded information, several concrete arch bridges were designed for further studies. The main span of these bridges range from 100 to 400 meters. The Structural analysis methods implemented in in this study are as following: Elastic Analysis: Direct Response History Analysis (DRHA): This method solves the direct equation of motion over time history of applied acceleration or imposed load in linear elastic range. Modal Response History Analysis (MRHA): Similar to DRHA, this method is also based on time history, but the equation of motion is simplified to single degree of freedom system and calculates the response of each mode independently. Performing this analysis require less time than DRHA. Modal Response Spectrum Analysis (MRSA): As it is obvious from its name, this method calculates the peak response of structure for each mode and combine them using modal combination rules based on the introduced spectra of ground motion. This method is expected to be fastest among Elastic analysis. Inelastic Analysis: Nonlinear Response History Analysis (NL-RHA): The most accurate strategy to address significant nonlinearities in structural dynamics is undoubtedly the nonlinear response history analysis which is similar to DRHA but extended to inelastic range by updating the stiffness matrix for every iteration. This onerous task, clearly increase the computational cost especially for unsymmetrical buildings that requires to be analyzed in a full 3D model for taking the torsional effects in to consideration. Modal Pushover Analysis (MPA): The Modal Pushover Analysis is basically the MRHA but extended to inelastic stage. After all, the MRHA cannot solve the system of dynamics because the resisting force fs(u; u_ ) is unknown for inelastic stage. The solution of MPA for this obstacle is using the previously recorded fs to evaluate system of dynamics. Extended Modal Pushover Analysis (EMPA): Expanded Modal pushover is a one of very recent proposed methods which evaluates response of structure under multi-directional excitation using the modal pushover analysis strategy. In one specific mode,the original pushover neglect the contribution of the directions different than characteristic one, this is reasonable in regular symmetric building but a structure with complex shape like long span arch bridges may go through strong modal coupling. This method intend to consider modal coupling while it take same time of computation as MPA. Coupled Nonlinear Static Pushover Analysis (CNSP): The EMPA includes the contribution of non-characteristic direction to the formal MPA procedure. However the static pushovers in EMPA are performed individually for every mode, accordingly the resulted values from different modes can be combined but this is only valid in elastic phase; as soon as any element in structure starts yielding the neutral axis of that section is no longer fixed for both response during the earthquake, meaning the longitudinal deflection unavoidably affect the transverse one or vice versa. To overcome this drawback, the CNSP suggests executing pushover analysis for governing modes of each direction at the same time. This strategy is estimated to be more accurate than MPA and EMPA, moreover the calculation time is reduced because only one pushover analysis is required. Regardless of the strategy, the accuracy of structural analysis is highly dependent on modelling and numerical integration approaches used in evaluation of each method. Therefore the widely used Finite Element Method is implemented in process of all analysis performed in this research. In order to address the study, chapter 2, starts with gathered information about constructed long span arch bridges, this chapter continuous with geometrical and material definition of new models. Chapter 3 provides the detailed information about structural analysis strategies; furthermore the step by step description of procedure of all methods is available in Appendix A. The document ends with the description of results and conclusion of chapter 4.

Business, development and inclusive supply chains. Exploring pathways for the sustainable incorporation of the poor as suppliers in agrifood supply chains

El panorama global está cambiando, y esto influye sobre la forma en la que entendemos y tratamos de alcanzar un desarrollo humano sostenible. El crecimiento de la población conlleva una mayor presión sobre los recursos, pero también supone una mayor cantidad de mano de obra y de talento; la concentración en áreas urbanas está cambiando las dinámicas sociales y desafiando los canales de comercialización tradicionales, pero también genera nuevos mercados y fomenta la innovación; los cambios en la economía global están reduciendo los tradicionales desequilibrios de poder entre los países occidentales y el resto del mundo; y las crecientes interconexiones crean nuevos riesgos pero también oportunidades para lanzar iniciativas de alcance global. Todas estas tendencias nos están obligando a repensar qué es el desarrollo humano y de qué manera deberíamos afrontar el reto de la pobreza. Es comúnmente aceptado que la globalización implica interdependencia y que, para conseguir un desarrollo humano sostenible, la colaboración entre actores de distintos ámbitos es necesaria. Se observa una creciente convergencia de temas, intereses y soluciones en torno al desarrollo sostenible, incluso en diferentes países y sectores, lo que está facilitando la colaboración estratégica entre empresas, gobiernos y sociedad civil. Existen pocas duda a día de hoy sobre el papel fundamental que las empresas deben desempeñar en la transición mundial hacia la sostenibilidad ambiental y la erradicación de la pobreza. Las empresas están evolucionando desde un enfoque tradicional centrado en la maximización de beneficios económicos hacia un enfoque holístico que integra la sostenibilidad y la responsabilidad social como parte del núcleo de negocio de las compañías. En el ámbito medioambiental, muchas empresas ya han comenzado a actuar y tratan de reducir sus emisiones, sus desechos y su consumo de energía. Sin embargo la contribución de las empresas a la reducción de la pobreza no está tan clara. Actualmente en torno a 1,2 miles de millones de personas viven en situación de extrema pobreza. La mayoría de estas personas aún vive en zonas rurales donde la mayor parte de la población activa trabaja en el sector agrícola. Por lo tanto, mejorar las oportunidades y reducir los riesgos de los productores más vulnerables en el sector de la agricultura puede ser un motor de desarrollo rural y reducción de la pobreza, especialmente en países de bajo nivel de desarrollo cuyas economías están fundamentalmente basadas en la agricultura. Algunas empresas comienzan a incluir a los pobres en sus operaciones como consumidores, proveedores y emprendedores. Esta tesis se centra en las potenciales oportunidades relacionadas con la incorporación sostenible de los pobres como proveedores de productos y/o de mano de obra. La colaboración entre empresas y productores vulnerables de países en desarrollo es un tema relativamente nuevo y todavía poco estudiado. La pregunta que guía esta tesis es: “¿Cómo pueden las empresas facilitar la inclusión sostenible en cadenas de suministro de productores vulnerables de los países menos desarrollados?”. Para responder a la pregunta anterior, la autora ha aplicado una metodología de casos de estudio. Esta metodología se considera apropiada porque la investigación sobre cadenas de suministro inclusivas es todavía escasa y porque es necesario entender en profundidad un fenómeno de la vida real, y para ello es fundamental conocer su contexto. En primer lugar, se realiza una revisión de literatura para identificar las proposiciones y los constructos teóricos que guiarán la posterior recogida de datos. La revisión de literatura se divide en dos partes: una más general que explora la dimensión social de la sostenibilidad en cadenas de suministro, y una más específica que se centra en la incorporación de los pobres como proveedores en cadenas de suministro. A lo largo de la última década, ha habido un crecimiento exponencial de los estudios académicos sobre la sostenibilidad de las cadenas de suministro, pero la mayoría de los esfuerzos se han dirigido hacia la dimensión medioambiental de la sostenibilidad. Por lo tanto la revisión de literatura, que se presenta en la Sección 3.1 (página 35) y que profundiza en la sostenibilidad social de las cadenas de suministro, puede considerarse una contribución en sí misma. Esta revisión de literatura revela que la investigación sobre aspectos sociales en cadenas de suministro está cobrando impulso en distintas áreas de conocimiento, principalmente en los ámbitos de investigación sobre “gestión de cadenas de suministro”, “responsabilidad social corporativa” y “estudios del desarrollo”. La investigación existente sobre sostenibilidad social de cadenas de suministro se centra en tres temas: aclarar la definición de sostenibilidad social; analizar la implementación de estrategias de sostenibilidad social en cadenas de suministro; y estudiar el apoyo de las em presas líderes a proveedores vulnerables para facilitar su transición hacia la sostenibilidad. Un marco conceptual que resume los principales hallazgos de esta primera parte de la revisión de literatura es planteado en la Figura 7 (página 48). No obstante, en el área de investigación que está emergiendo en torno a la sostenibilidad social de las cadenas de suministro, los estudios relacionados con la reducción de la pobreza son aún escasos. Además se aprecia una falta de contribuciones desde y sobre los países menos desarrollados, así como una clara tendencia a reflejar la visión de las empresas líderes de las cadenas de suministro, olvidando la perspectiva de los proveedores. La segunda parte de la revisión de literatura presentada en la Sección 3.2 (página 51) profundiza en tres líneas de investigación que exploran, desde distintas perspectivas, la inclusión de los pobres en cadenas de suministro. Estas líneas son “Global Value Chains” (GVC), “Base of the Pyramid” (BoP) y “Sustainable Supply Chain Management” (SSCM). La investigación en GVC analiza las cadenas de suministro desde la perspectiva de la globalización económica y el comercio internacional, poniendo especial énfasis en las implicaciones para los países en desarrollo y las comunidades vulnerables. GVC caracteriza las cadenas de suministro según la forma en la que son gobernadas, las oportunidades de mejora que existen para los productores que forman parte de la cadena y el grado de inclusión o exclusión de las comunidades más pobres y vulnerables. La investigación en BoP explora las relaciones comerciales entre empresas y comunidades pobres. La premisa fundamental del concepto BoP es la posibilidad de combinar la generación de beneficios con la reducción de la pobreza. La propuesta original es que mediante la venta de productos y servicios a las comunidades pobres de países en desarrollo, la pobreza puede ser reducida al tiempo que las empresas incrementan sus beneficios, especialmente las grandes empresas multinacionales. Esta idea ha ido evolucionando y, a día de hoy, los investigadores BoP consideran la incorporación de los pobres no sólo como consumidores sino también como empleados, proveedores y co-creadores. La investigación en SSCM ha estado fundamentalmente orientada al estudio de la dimensión medioambiental de la sostenibilidad de cadenas de suministro. Sin embargo, la creciente externalización de la producción a países en desarrollo y las demandas de los grupos de interés para que las empresas aborden todos los aspectos de la sostenibilidad han llevado a los académicos de SSCM a reconocer la importancia de integrar asuntos relacionados con la reducción de la pobreza en sus investigaciones. Algunos estudios comienzan a apuntar los principales retos a los que se enfrentan las empresas para colaborar con productores vulnerables en sus cadenas de suministro. Estos retos son: falta de comunicación, altos costes de transacción y el incremento de la complejidad de las operaciones. Las contribuciones de estas tres líneas de investigación son complementarias para el estudio de las cadenas de suministro inclusivas. Sin embargo, raramente han sido consideradas conjuntamente, ya que pertenecen a ámbitos de conocimiento distintos. Esta tesis integra las aportaciones de GVC, BoP y SSCM en un marco conceptual para la creación y gestión de cadenas de suministro inclusivas. Este marco conceptual para cadenas de suministro inclusivas queda representado en la Figura 9 (página 68). El marco conceptual refleja las motivaciones que llevan a las empresas a colaborar con productores vulnerables, los retos a los que se enfrentan al hacerlo, y los caminos o estrategias que están siguiendo para construir y operar cadenas de suministro inclusivas de manera que sean beneficiosas tanto para la empresa como para los productores vulnerables. A fin de validar y refinar el marco conceptual propuesto, tres casos de estudio se llevan a cabo. Las cadenas de suministro analizadas por los casos de estudio pertenecen al sector agrícola y sus principales proveedores se encuentran en países de África subsahariana. Múltiples métodos de recolección de datos y triangulación son utilizados para mejorar la fiabilidad de los datos. La autora desarrolló trabajos de campo en Senegal, Etiopía y Tanzania. Estos viajes permitieron enriquecer el proceso de recogida de información mediante entrevistas semiestructuradas y conversaciones informales con los principales actores de la cadena de suministro y mediante la observación directa de los procesos y las interacciones entre productores vulnerables y empresas. El Caso de estudio A (Sección 5.1 en página 96) es un caso de estudio único. Analiza la cadena de suministro local de verduras en Senegal. La organización focal es Manobi, una empresa senegalesa que provee servicios de bajo coste a emprendedores locales del sector agrícola. El Caso de estudio A proporciona un interesante análisis del funcionamiento de una cadena de suministro local en un país en desarrollo y muestra como la provisión de servicios profesionales puede mejorar el desempeño de productores vulnerables. El Caso de estudio B (Sección 5.2 en página 122) es un caso de estudio único. Analiza la cadena de suministro global de flor cortada con origen en Etiopía. La organización focal es EHPEA, la Asociación Etíope de Productores y Exportadores Hortícolas, cuya misión es promover y salvaguardar la posición competitiva del sector agrícola etíope en el mercado global. El Caso de estudio B ayuda a comprender mejor la perspectiva de los proveedores respecto a los requerimiento de sostenibilidad del mercado global. También muestra cómo la inclusión de los productores en el proceso de desarrollo de un estándar privado facilita su implementación posterior. El Caso de estudio C (Sección 5.3 en página 143) es un caso de estudio múltiple. Analiza la cadena de suministro global de café especial con origen en Tanzania. Las organizaciones focales son comerciantes que conectan de manera directa a pequeños agricultores de café en países en desarrollo con empresas tostadoras de café en países desarrollados. El Caso de estudio C muestra cómo un pequeño agricultor puede proveer un producto “premium” al mercado global, y participar en un segmento diferenciado del mercado a través de una cadena de suministro transparente y eficiente. Las aportaciones empíricas de los casos de estudio ayudan a validar y mejorar el marco conceptual sobre cadenas de suministro inclusivas (ver discusión en el Capítulo 6 en página 170). El resultado es la propuesta de una nueva versión del marco conceptual representado en la Figura 40 (página 195). Los casos de estudio también proporcionan interesantes aportaciones en relación a la gestión de cadenas de suministro inclusivas y muestran las perspectivas de distintos actores implicados. Esta tesis arroja luz sobre el papel de las empresas en la creación y la gestión de cadenas de suministro inclusivas llevando a cabo una revisión de literatura multidisciplinar y analizando tres casos de estudio en países africanos. Como resultado, esta tesis presenta una serie de contribuciones empíricas y teóricas al ámbito de investigación emergente en torno a las cadenas de suministro inclusivas (Capítulo 7). Esta tesis también pretende ser útil a profesionales que deseen facilitar la incorporación de los pobres como proveedores en condiciones justas y beneficiosas. ABSTRACT The global outlook is changing, and this is influencing the way we understand and try to achieve sustainable human development. Population growth entails increasing pressure over resources, but it also provides greater workforce and talent; concentration in urban areas is changing social dynamics and challenging traditional marketing channels, but also creating news markets and driving innovation; the global economy shift is rebalancing the traditional power imbalance between Western countries and the rest of the world, making new opportunities to arise; and interconnections and global interdependence create new risks but also opportunities for launching initiatives with a global reach. All these trends are impelling us to rethink what development is and in which way poverty alleviation should be approached. It is generally agreed that globalization implies interdependence and, in order to achieve sustainable human development, collaboration of all actors is needed. A convergence of issues, interests and solutions related to sustainable development is being observed across countries and sectors, encouraging strategic collaboration among companies, governments and civil society. There is little doubt nowadays about the crucial role of the private sector in the world’s path towards environmental sustainability and poverty alleviation. Businesses are evolving from a “business as usual” stance to a more sustainable and responsible approach. In the environmental arena, many companies have already “walk the talk”, implementing environmental management systems and trying to reduce emissions and energy consumption. However, regarding poverty alleviation, their contribution is less clear. There are around 1.2 billion people living in extreme poverty. Most of this people still live in rural areas where the agricultural sector employs a big part of the active population. Therefore, improving opportunities and reducing risks for vulnerable producers in the agri-food sector can be a primary engine of rural development and poverty alleviation, particularly in the poor, agriculture-based economies of least developed countries. Some companies are beginning to include the poor into their operations as consumers, suppliers and entrepreneurs. This thesis focuses specifically on the potential opportunities related to the sustainable incorporation of the poor as suppliers of products and/or labor. Business collaboration with vulnerable producers in developing countries is a relatively new trend and it is still understudied. The overall question guiding this thesis is: “How can businesses facilitate the sustainable inclusion of vulnerable producers from least developed countries into supply chains?”. In order to answer the research question, the author has applied a case study research strategy. This methodology is considered appropriate because research about inclusive supply chains is still at an early stage, and because there is a need to understand a real-life phenomenon in depth, but such understanding encompasses important contextual conditions. First, a literature review is conducted, in order to identify the research propositions and theoretical constructs that will guide the data collection. The literature review is divided in two parts: a more general one that explores the social dimension of sustainability of supply chains, and a more specific one that focuses on the incorporation of the poor as suppliers in supply chains. During the last decade, there has been an exponential growth of studies in the field of supply chain sustainability, but research efforts have traditionally been directed towards the analysis of the environmental dimension. Therefore, the literature review presented in Section 3.1 (page 35) that delves into social sustainability of supply chains can be considered a contribution in itself. This literature review reveals that the investigation of social issues in supply chains is gaining momentum and comes from different academic disciplines, namely Supply Chain Management, Corporate Social Responsibility and Development Studies. Existing research about social sustainability of supply chains focuses on three issues: clarify the definition of social sustainability; analyze the implementation of social sustainability strategies in supply chains; and study lead companies’ support to vulnerable suppliers in their transition towards sustainability. A conceptual framework that outlines the main findings that emerge from this first part of literature review is proposed in Figure 7 (page 48). Nevertheless, in this nascent field of social sustainability of supply chains, studies related to poverty alleviation are still scarce. Moreover, a lack of contributions from and about least developed countries has been observed, as well as a tendency to reflect on the lead firms’ standpoint, neglecting the suppliers’ perspective. The second part of the literature review (Section 3.2 in page 51) delves into three research streams that are exploring the inclusion of the poor into supply chains from different viewpoints. These research streams are Global Value Chains (GVC), Base of the Pyramid (BoP) and Sustainable Supply Chain Management (SSCM). GVC research discusses the dynamics of economic globalization and international trade, putting special emphasis in the implications for developing countries and vulnerable communities. GVC characterizes supply chains by the way they are governed, the upgrading opportunities that exist for producers in the chain and the degree of inclusion or exclusion of impoverished communities. BoP research explores trading relationships between businesses and impoverished communities. The core premise of the BoP concept is the possibility to combine profits with poverty alleviation. The original BoP proposition is that by marketing innovative products and services to poor communities in developing countries, poverty would be reduced and companies would increase their benefits, especially multinational companies. This idea has evolved to consider the incorporation of the poor to business activities not only as consumers, but also as employees, entrepreneurs and co-creators. The SSCM school of thought has mainly focused on studying the environmental dimension of supply chain sustainability, neglecting the consideration of the social perspective. However, in recent years, increasing outsourcing of production to developing countries and stakeholders’ demands for a more holistic approach to business sustainability have led SSCM scholars to acknowledge the importance of integrating poverty concerns in this field’s research agenda. Some SSCM studies identify the main operational challenges for companies which engage with vulnerable suppliers in their supply chains: missing communication, higher transactional and operational costs and increased complexity. Contributions from these three research streams are complementary for the study of inclusive supply chains. However, they have been rarely considered together, since they belong to different research areas. This thesis seeks to play a dovetailing role in this scenario by proposing a conceptual framework for creating and operating inclusive supply chains that builds on contributions from GVC, SSCM and BoP research. This framework for inclusive supply chains is depicted in Figure 9 (page 68), and explains the motivations that drive businesses to collaborate with vulnerable suppliers, the chal lenges they face in doing so, and the pathways they are following in order to build and operate inclusive supply chains profitably for both buying companies and vulnerable suppliers. In order to validate and refine the proposed framework, three case studies are carried out. The supply chains analyzed by the case studies belong to the agri-food sector and source from Sub-Saharan African countries. Multiple data collection methods and triangulation are used in order to improve reliability of findings. The author carried out field work in Senegal, Ethiopia and Tanzania. These travels enriched the data collection process, providing semi-structured interviews and informal conversations with the main actors in the supply chains, as well as direct observation of processes and interactions among companies and vulnerable suppliers. Case study A (Section 5.1 in page 96) is a single case study. It analyzes a local supply chain in Senegal providing vegetables to the local market. The focal organization is Manobi, a Senegalese inclusive business which provides affordable ICT services to local entrepreneurs in the agri-food sector. Case study A provides interesting insights into the dynamics of local supply chains and how professional services can help to improve their performance. Case study B (Section 5.2 in page 122) is a single case study. It analyzes a global supply chain with origin in Ethiopia providing cut flowers to the global commodity market. The focal organization is EHPEA, Ethiopian Horticulture Producers and Exporters Association, whose mission is to promote and safeguard the competitive position of the Ethiopian horticulture sector within the global market. Case study B helps to better understand the suppliers’ perspective regarding global market sustainability requirements and shows how the inclusion of suppliers in the process of development of a private standard has a positive impact in its implementation. Case study C (Section 5.3 in page 143) is a multiple case study. It analyzes a global supply chain with origin in Tanzania providing coffee to the global niche market of specialty coffee. The focal organizations are traders who are directly connecting smallholder coffee farmers in developing countries to coffee roasters in developed countries. Case study C shows how smallholder farmers can supply a premium product and be incorporated in a differentiated market segment through a transparent and efficient supply chain. The empirical findings from the case studies help to validate and refine the conceptual framework (see discussion in Chapter 6). The proposal of a new version of the conceptual framework is depicted in Figure 40 (page 195). The case studies also provide interesting insights related to the management of inclusive supply chains and show the perspectives of the different actors involved. This thesis sheds some light on the role of businesses in the creation and operation of inclusive supply chains by carrying out a cross-disciplinary literature review and analyzing three case studies in African countries. In doing so, this thesis presents a series of theoretical and empirical contributions to the emerging academic field of inclusive supply chains (Chapter 7). This thesis also intends to be useful to practitioners willing to improve the incorporation of the poor as suppliers in fair and profitable conditions.

Rem : a los dos lados del espejo = (Rem at both sides of the mirror)

Cuando se trata de Rem Koolhaas, su espejo no refleja una sola imagen sino múltiples, es un prisma poliédrico. Su espejo nos devuelve el Rem mediático, el intelectual, el conceptualizador, el constructor, el analista, el periodista, el actor... En el caso de esta investigación, fijamos el punto de mira en el Rem COMUNICADOR. “Rem a los dos lados del espejo” se enmarca en una investigación sobre los medios de comunicación de arquitectura, su reflejo en la producción arquitectónica y viceversa. Se trata de llegar a discernir si comunicación y producción arquitectónica colisionan y confluyen en el caso de grandes comunicadores como Rem Koolhaas, si el mensaje y el medio transmisor adquieren las mismas cualidades. Centrándose en la figura de Rem Koolhaas, la tesis aborda la evolución de su faceta comunicativa y las transformaciones sucesivas en el campo de la comunicación arquitectónica, en paralelo a su evolución conceptual a lo largo de su trayectoria. La investigación, por tanto, no se centra tanto en su componente teórica o en la práctica arquitectónica de OMA, sino en la exposición de su producción al mundo, especialmente a través de sus ensayos y libros. “Delirious New York” y “SMLXL” son un reflejo del momento conceptual en que se inscriben, y contienen mucha información sobre los referentes gráficos que irremediablemente han influido en su composición. Especialmente, la aparición de “SMLXL” supuso un revulsivo para el mundo de la comunicación arquitectónica, porque puso el foco sobre la importancia de dejar atrás un discurso narrativo linea y unifocal, para afrontar la comunicación barajando múltiples variables, y aproximaciones, en un proceso similar al desarrollo de un proyecto de arquitectura. Presenta un diseño muy novedoso y una edición extremadamente cuidada, que atiende a parámetros mucho más ambiciosos que los meramente narrativos. Profundiza en la necesidad de una temática global, planteando cuál es la aproximación más apropiada para cada uno de los proyectos que describe, transmitiendo al lector una percepción más allá de lo estrictamente visual, más próximo a lo sensorial. Además, su enorme repercusión a nivel internacional y el gran interés que despertó (no solamente entre los arquitectos, sino también entre diseñadores gráficos, publicistas, personas provenientes de todo tipo de tendencias artísticas y público en general), provocó la globalización del fenómeno de las publicaciones arquitectónicas y puso de manifiesto la importancia de la comunicación como una disciplina en sí misma, dentro de la producción arquitectónica en la era actual. A pesar de la importancia de “SMLXL” a todos los niveles, la presente tesis plantea que, donde realmente se culmina esa experiencia comunicativa, es en “Content”, al incluir nuevos parámetros relacionados con la fusión conceptual de continente y contenido. Es en esta publicación donde el objeto de la comunicación y la expresión de la misma se convierten en un único elemento, que se rige por leyes similares. En este caso, la ley fundamental es la aplicación hasta sus máximas consecuencias de la “cultura de la congestión”, tanto en el mensaje como en el medio, generando lo que hemos convenido en denominar “comunicación congestiva”. Esta concepción deviene en que necesariamente se materialice como un producto efímero, desechable, casi virtual, porque responde a las condiciones de un momento muy concreto y específico y fuera de ese contexto pierde su significación.. La “cultura de la congestión” empieza a surgir en los planteamientos de Koolhaas en la Architectural Association School of Architecture de Londres, bajo la tutela de Elia Zenghelis. Posteriormente se desarrolla en su manifiesto retroactivo sobre Manhattan, “Delirious New York”, donde declara la guerra abierta al urbanismo del movimiento moderno y afirma que la ciudad realmente contemporánea es aquella que es fruto de un desarrollo no planificado, hiperdensa y posible gracias a los avances tecnológicos de su era. Finalmente comienza a materializarse en la Diploma Unit 9 de la AA, donde entra como profesor en 1975, dejando una huella indeleble en las generaciones posteriores de arquitectos que pasaron dicha unidad. Rem Koolhaas es ante todo un intelectual y por ello, todo el constructo teórico sobre la metrópolis comienza a reflejarse en su obra a través de OMA desde el comienzo de su producción. Podemos decir a grandes rasgos que su carrera está marcada por dos hitos históricos fundamentales que determinan tres etapas diferenciadas en su producción. En sus primeros años de profesión, Koolhaas sigue fascinado por la metrópolis urbana y la aplicación del método paranoico crítico a su producción arquitectónica. Es un arquitecto profundamente surrealista. Entiende este método como una estrategia de conocimiento y aproximación al mundo que le rodea: “dejar salir el inconsciente pero sostenerlo con las muletas de la racionalidad”. Pero lo que en realidad le interesa es su aplicación a la gran escala, el “Bigness”, y por ello, participa en proyectos muy ambiciosos de los que surgen conceptos que, más allá de resultar premiados o no, han dejado una huella ideológica en el devenir de la arquitectura. Entre estos proyectos, cabe destacar su propuesta para el Parque de la Villette o la Très Grande Bibliotèque de París. Sus proyectos de esta época destilan una gran carga conceptual, que devienen en unos interiores sorprendentes pero una apariencia exterior sobria o incluso podríamos decir "povera", por el uso de materiales efímeros, poco habituales en la macro-arquitectura hasta ese momento. Súbitamente, en 1997, explotó el denominado “Efecto Bilbao”, de la mano de Frank Gehry (1). El Museo Guggenheim de Bilbao, con su espectacularidad, sus formas pregnantes e imposibles, impacta al mundo. Nace la era de la “Arquitectura del Espectáculo”; la transformación de la ciudad a través de ICONOS que actúen como nodos de atracción y concentración en torno a los cuales supuestamente se revitaliza la actividad económica, cultural y sociopolítica de la ciudad, como si a través de un único gesto se pudieran regenerar todos los tejidos internos de la urbe. Rem Koolhaas comprende rápidamente que la aproximación a la ciudad ha cambiado y, sobre todo, el mercado. En el mundo de la globalización, la única manera de llegar a materializar el “Bigness”, es encerrando sus ejercicios intelectuales en formas pregnantes, bellas, icónicas, espectaculares. Koolhaas encuentra su marca personal en la estética “Stealth”, proveniente de los aviones de combate facetados para evitar los radares, elaborados en los años 80. De esta época surgen proyectos como la Casa da Música de Oporto o la Biblioteca de Seattle; ambos edificios son iconos facetados, de belleza pregnante, que dejan una huella indeleble en la ciudad y provocan, al igual que el Guggenheim, un cierto efecto de recuperación y revitalización en el entorno en que se asientan, al menos de manera temporal. En cualquier caso, Koolhaas nunca abandona los ejercicios meramente teóricos, pero segrega su actividad en dos: OMA produce aquello que tiene vocación de ser construido y se rige por los parámetros del mercado global y AMO, la otra cara del espejo de Rem, aplica el pensamiento arquitectónico a campos no explorados, sin la dependencia de agentes externos, pudiendo permitirse ser un laboratorio puramente experimental. En este escenario, llega el 11 de septiembre de 2001 y el ataque a las Torres Gemelas de Nueva York tiene efectos devastadores a todos los niveles, significando, en un período de tiempo sorprendentemente corto, un cambio en el orden mundial. Rem Koolhaas da entonces un giro de 180 grados, dirige su mirada hacia China, donde entiende que sus aportaciones tienen un beneficio social más directo que en occidente. (2) Para presentar al mundo su nuevo cambio de rumbo y la creación del “Think Tank” AMO, plantea una gran exposición en la NeueGallerie de Berlín bajo el título de “Content”, experiencia paralela a la edición del libro con el mismo título, que inicialmente nace como “catálogo de la exposición, pero que internamente siempre se concibió como el documento más trascendente en el estudio desde “SMLXL”. Sin embargo, en muchos aspectos se trata de su opuesto: una publicación con formato revista, de tapa blanda, con paginado muy fino, formato de "folleto de supermercado" y contenido hiperdenso. Es un experimento efímero, fugaz, ligero, barato, de “usar y tirar”. De hecho, está fuera de stock, ya no se edita. Probablemente Rem Koolhaas desaprobaría que se hiciera una investigación que pusiera el foco sobre el mismo, porque diez años después de su publicación seguramente opine que su vigencia ha caducado. Sin embargo, muestra con una claridad meridiana el estado conceptual y vital de OMA en el momento de su publicación y representa, además un verdadero hito en la comunicación arquitectónica, un punto de no retorno, el máximo exponente de lo que hemos denominado “comunicación congestiva”. La presente tesis plantea que “Content” contiene la esencia de la mayor aportación de Rem Koolhaas al mundo de la arquitectura: la transformación profunda y definitiva de la comunicación arquitectónica mediante la convergencia del estado conceptual y la transmisión del mismo. Su legado arquitectónico y conceptual ha marcado a todas las generaciones posteriores de manera indeleble. Sus ensayos, sus teorías, sus proyectos y sus edificaciones ya pertenecen a la historia de la arquitectura, sin ninguna duda. Pero es su revisión del concepto de la comunicación en arquitectura lo que ha tenido y tendrá un reflejo inmediato en las generaciones futuras, no solamente en la comunicación sino en su arquitectura, a través de un intercambio biyectivo. El planteamiento a futuro sería determinar qué sucede tras “Content”, tras la hiperdensidad máxima, tras la cultura de la congestión visual; qué es lo que propone Koolhaas y qué se va a plantear también en el mundo de la comunicación arquitectónica. Para ello, estudiaremos en profundidad sus últimos proyectos relacionados con la comunicación, como su propuesta para la Biennale de Arquitectura de Venecia de 2014, su intensa investigación sobre el “Metabolismo” en “Project Japan: Metabolism Talks...”, o la dirección de sus últimos planteamientos territoriales. En los últimos tiempos Rem Koolhaas habla de “Preservación”, de “Sobriedad”, de “Esencialismo”, de “Performance”... El autor intelectual de la cultura de la congestión habla ahora de la “low density”...como no podía ser de otra manera en la otra cara del espejo. En definitiva, el color blanco como suma de todos los colores, todas las longitudes de onda del espectro visible recibidas al tiempo. ABSTRACT When talking about Rem Koolhaas, the mirror does not only reflect one but numerous images: it is nothing but a polyhedral prism. His mirror gives us the image of Rem the media celebrity, the intellectual, the conceptualizer, the builder, the analyst, the journalist, the actor... This research sets the spotlight on Rem the COMMUNICATOR. "Rem on both sides of the mirror" belongs to a research on architectural media, its influence on the architectural production and vice versa. It is aimed at getting to discern whether communication and architectural production collide and converge in the case of great communicators such as Rem Koolhaas, and whether the message and transmission media acquire the same features. Focusing on the figure of Rem Koolhaas, this thesis addresses the evolution of his communicative facet and the successive transformations in the field of architectural communication, parallel to the conceptual evolution he underwent throughout his career. Therefore, this research is not so much focused on his theoretical component or on the OMA’s architectural practice, but on the exhibition of his production to the world, especially through his essays and books. "Delirious New York" and "SMLXL" hold up a mirror to the conceptual moment they are part of, and contain a great deal of information about the graphic references that have inevitably influenced his work. Specially, the launch of "SMLXL" was a salutary shock for the architectural communication world, since it set the spotlight on the importance of leaving a linear and unifocal narrative behind in order to face communication considering multiple variables and approaches, based on a process similar to the development of an architectural project. It offers a very innovative design and an extremely careful editing, which deals with parameters much more ambitious than those merely narrative. It explores the need for a global subject and suggests the most appropriate approach for each of the projects described, giving the reader a closer insight to the sensory that goes beyond what’s strictly visual. In addition, its huge international impact and the great interest shown, not only by architects but also by graphic designers, publishers, people from all kinds of artistic trends and the general public, led to the globalisation of the architectural publications phenomenon and brought the importance of communication as a discipline in itself, within the architectural production in the age at hand, to light. Despite the importance of "SMLXL" at all levels, this thesis suggests that the communication experience really culminates in "Content", for it includes new conceptual parameters associated with the container-content conceptual fusion. It is in this book where the purpose of communication and the expression of such become a single element, ruled by similar laws. In this particular case, the fundamental law is to implement the "culture of congestion" to its extreme consequences in both the message and the media, leading to what we have agreed to refer to as "congestive communication”. This concept leads to its inevitable materialisation into an ephemeral, disposable, almost virtual product, because it meets the conditions of a very concrete and specific time, and outside that context it loses its significance. The "culture of congestion" emerged in Koolhaas’ approaches under the guidance of Elia Zenghelis, in the Architectural Association School of Architecture of London. Subsequently, his retroactive manifesto on Manhattan, "Delirious New York" developed it, waging an all-out war against the modern movement urbanism and maintaining that the really contemporary cities are those hyperdense ones that rise as a result of an unplanned development and thanks to the typical technological advances of their time. Finally it began to materialise in the Diploma Unit 9 of the AA, in which he started lecturing in 1975, leaving an indelible mark on subsequent generations of architects who passed that unit. First and foremost, Rem Koolhaas is an intellectual and, therefore, all the theoretical construct in the metropolis began to be reflected in his work through OMA since the beginnings of his production. Broadly speaking, we can say that his career is influenced by two essential historic events, which determine three different stages in his production. In the early years of his career, Koolhaas was still fascinated by the urban metropolis and the implementation of the paranoiac-critical method to his architectural production. He was then a deeply surreal architect. He understood this method as a knowledge strategy and an approach to the world around him: "let the subconscious out but hold it with the crutches of reasonableness”. However, he was actually interested in its implementation on a broad scale, the "Bigness", and therefore, he took part in ambitious projects that led to the accrual of concepts that, beyond being rewarded, left an ideological impression on the evolution of architecture. These projects included his proposal for the Parc de la Villette or the Très Grande Bibliotèque in Paris. The projects he carried out during this period showed a great conceptual background, which evolved into surprising interiors but a sober, or even "povera", exterior appearance, thanks to the use of ephemeral materials that were atypical in the macro-architecture field until that moment. Suddenly, in 1997, the so-called "Bilbao effect" boomed thanks to Frank Gehry (1). The Guggenheim Museum of Bilbao amazed the world with its spectacular nature and its pregnant and impossible shapes. It was the beginning of the era of “The architecture of spectacle”: the transformation of the city through ICONS that would act as nodes of attraction and gathering, around which the economic, cultural and socio-political activity of the city was supposed to be revitalized, as if through a single gesture all internal tissues of the city could be rebuilt. Rem Koolhaas quickly realized that the approach to the city, and especially to the global market, had changed. In the world of globalisation, the only way to get to materialise such "Bigness" was by keeping his intellectual exercises in pregnant, beautiful, iconic and spectacular shapes. Koolhaas found his personal brand in the Stealth aesthetic, resulting from the eighties American combat aircrafts whose shape was faceted in order to avoid radars. Projects such as the Casa da Música in Porto or the Seattle Library date from this period; both buildings are faceted icons of pregnant beauty that left an indelible mark on the city and caused, like the Guggenheim, some degree of recovery and revitalization on the environment in which they were based, at least temporarily. In any case, Koolhaas never gave the merely theoretical exercises up, but he segregated his work in two: OMA produced what was destined to be built and ruled by the parameters of the global market and AMO, Rem’s other side of the mirror, applied the architectural thought in unexplored fields, notwithstanding external agents and being able to work as a purely experimental laboratory. In light of this backdrop, September 11th 2001 came and the attacks on the Twin Towers in New York had devastating effects at all levels, leading to a change in the world order, in a surprisingly short period of time. Rem Koolhaas made a 180° turn directing his vision towards China, where he believed his contributions would have a more direct social benefit than in the Western world. (2) In order to introduce his new course of direction and the creation of the AMO "Think Tank", he planned a major exhibition in the Neue Nationalgalerie of Berlin under the title "Content", in parallel with edition of the book with the same title, which was at first the "exhibition catalog” but, deep down, was always conceived as the most important document of the Office since "SMLXL". However, in many ways it was just the opposite: a publication characterised by its magazine format, soft cover, very fine paging, "supermarket brochure" form and hyperdense content. It was an ephemeral, brief, light, cheap and "disposable" experiment. In fact, it is currently out of stock and out of print. Rem Koolhaas would probably disapprove of a research that sets the spotlight on him, for he would probably say that his validity has expired given that it has been ten years since its publication. However, it shows OMA’s conceptual and vital status at the time of its publication with crystalline clarity and it is also a true milestone in architectural communication. A point of no return. The epitome of the so-called "congestive communication ". This thesis suggests that "Content" contains the essence of Rem Koolhaas’ greatest contribution to the world of architecture: the deep and definitive transformation of architectural communication through the convergence of the conceptual state and the transmission thereof. His architectural and conceptual legacy has left an indelible mark on all subsequent generations. There is no doubt his essays, theories, projects and buildings already belong to the history of architecture. But it is his review on the concept of communication in architecture that has had and shall have an immediate influence on future generations, not only in their communication but also in their architecture, through a bijective exchange. Future approaches should try to determine what happens after "Content", after the maximum hyperdensity, after the visual culture of congestion; what shall Koolhaas suggest as well as what shall happen in the world of architectural communication. To this end, we shall study his latest communication-related projects, such as the design of the Venetian Architecture Biennale in 2014, his intensive research on the "Metabolism" in "Project Japan: Metabolism Talks ...", or the course of his latest territorial approaches in depth. Most recently, Rem Koolhaas has talked about "Preservation", "Sobriety" of "Essentialism", "Performance", etc. The mastermind of the culture of congestion now speaks of the "low density"... as it could not be otherwise, on the other side of the mirror. Summarizing, the white color as the sum of all colors; all wavelengths of the visible spectrum received at the same time.

Comparative assessment of virulence of recombinant vaccinia viruses expressing IL-2 and IL-15 in immunodeficient mice

IL-2 and -15 belong to the four α-helix bundle family of cytokines and display a spectrum of overlapping immune functions because of shared signal transducing receptor components of the IL-2 receptor complex. However, recent evidence suggests a nonredundant unique role for IL-15 in the establishment and perhaps maintenance of peripheral natural killer (NK) cell populations in vivo. To explore the contribution of locally released IL-15 on peripheral NK-cell-mediated innate immune responses, we generated a recombinant vaccinia virus that expresses IL-15 and evaluated the course of vaccinial disease in athymic nude mice. Coexpression of IL-15 resulted in the attenuation of virulence of vaccinia virus, and mice inoculated with 105 plaque-forming units or less resolved the infection successfully. In contrast, mice inoculated with a similar dose of the control vaccinia virus failed to eliminate the virus and died of generalized vaccinial disease. Enhanced expression of IL-12 and IFN-γ as well as induction of chemokines were evident in the mice inoculated with IL-15-expressing vaccinia virus in addition to an increase in NK cells in the spleen. However, in this model system, the degree of attenuation in viral virulence attained with coexpression of IL-15 was much less than that achieved with coexpression of IL-2, suggesting that the peripheral NK-cell-mediated events are more responsive to IL-2 than to IL-15.