967 resultados para Dc-dc power conversion
Resumo:
En este trabajo se estudia el sistema reproductivo de Diplotaxis erucoides (L.) DC. (Brassicaceae), una especie arvense ampliamente distribuida en los cultivos y los márgenes de caminos de la región mediterránea. Mediante polinizaciones manuales con polen procedente de la propia flor (autogamia), de flores del mismo individuo (geitonogamia) y de flores de individuos de otras poblaciones (alogamia) se analiza el efecto de los diferentes tratamientos de polinización sobre la producción de frutos y semillas. Los resultados obtenidos muestran que Diplotaxis erucoides es una especie con capacidad para autopolinizarse. Hay diferencias significativas en la fertilidad y en el número de semillas por fruto entre los tratamientos que generan alogamia y los que originan autogamia. Dentro de los tratamientos con autogamia, la fertilidad disminuye progresivamente en el paso de geitonogamia a autogamia por autopolinización inducida y a autogamia por autopolinización espontánea.
Resumo:
This paper deals with the most common methods for determining the dc electrical resistivity in solid materials. A brief overview of the fundamental concepts related to the electrical resistivity on materials is introduced. Undoubtedly, the most common and useful procedure to determine the electrical resistivity (rho) is the fourpoint probe method. Some crucial mistakes regarding the experimental procedure and the appropriated correction factors are found in the literature. Thus, the correction factor for the most common sample geometries were gathered and revised in order to provide an easy way to use and apply them.
Resumo:
Technical analysis of Low Voltage Direct Current (LVDC) distribution systems shows that in LVDC transmission the customer voltage quality is higher. One of the problems in LVDC distribution networks that converters both ends of the DC line are required. Because of the converters produce not pure DC voltage, but some fluctuations as well, the huge electrolytic capacitors are required to reduce voltage distortions in the DC-side. This thesis master’s thesis is focused on calculating required DC-link capacitance for LVDC transmission and estimation of the influence of different parameters on the voltage quality. The goal is to investigate the methods of the DC-link capacitance estimation and location in the transmission line.
Estudo químico e perfil cromatográfico das cascas de Aspidosperma parvifolium A. DC. ("pau-pereira")
Resumo:
Four known alkaloids, uleine, epiuleine, apparicine and desmethyluleine, besides the isoprenoids lupeol and stigmasterol were isolated from the stem bark of Aspidosperma parvifolium. Their identification was based on spectroscopic analysis (UV, IR, ¹H-NMR, 13C-NMR, MS). The chromatographic profile of the ethanolic extract was obtained by HPLC and uleine, epiuleine and apparicine were identified in the extract.
Resumo:
Eighteen circular blocks of resins cured either by a LED or a halogen lamp (20, 40 and 60 s), had their top (T) and bottom (B) surfaces studied using a FT-Raman spectrometer. Systematic changes in the intensity of the methacrylate C=C stretching mode at 1638 cm-1 as a function of exposure duration were observed. The calculated degree of conversion (DC) ranged from 45.0% (B) to 52.0% (T) and from 49.0% (B) to 55.0% (T) for the LED and halogen lamp, respectively. LED and halogen light produced similar DC values with 40 and 60 s of irradiation.
Resumo:
Power electronic converter drives use, for the sake of high efficiency, pulse-width modulation that results in sequences of high-voltage high-frequency steep-edged pulses. Such a signal contains a set of high harmonics not required for control purposes. Harmonics cause reflections in the cable between the motor and the inverter leading to faster winding insulation ageing. Bearing failures and problems with electromagnetic compatibility may also result. Electrical du/dt filters provide an effective solution to problems caused by pulse-width modulation, thereby increasing the performance and service life of the electrical machines. It is shown that RLC filters effectively decrease the reflection phenomena in the cable. Improved (simple, but effective) solutions are found for both differential- and common-mode signals; these solutions use a galvanic connection between the RLC filter star point and the converter DC link. Foil chokes and film capacitors are among the most widely used components in high-power applications. In actual applications they can be placed in different parts of the cabinet. This fact complicates the arrangement of the cabinet and decreases the reliability of the system. In addition, the inductances of connection wires may prevent filtration at high frequencies. This thesis introduces a new hybrid LC filter that uses a natural capacitance between the turns of the foil choke based on integration of an auxiliary layer into it. The main idea of the hybrid LC filter results from the fact that both the foil choke and the film capacitors have the same roll structure. Moreover, the capacitance between the turns (“intra capacitance”) of the foil inductors is the reason for the deterioration of their properties at high frequencies. It is shown that the proposed filter has a natural cancellation of the intra capacitance. A hybrid LC filter may contain two or more foil layers isolated from each other and coiled on a core. The core material can be iron or even air as in the filter considered in this work. One of the foils, called the main foil, can be placed between the inverter and the motor cable. Other ones, called auxiliary foils, may be connected in star to create differential-mode noise paths, and then coupled to the DC link midpoint to guarantee a traveling path, especially for the common-mode currents. This way, there is a remarkable capacitance between the main foil and the auxiliary foil. Investigations showed that such a system can be described by a simple equivalent LC filter in a wide range of frequencies. Because of its simple hybrid construction, the proposed LC filter can be a cost-effective and competitive solution for modern power drives. In the thesis, the application field of the proposed filter is considered and determined. The basics of hybrid LC filter design are developed further. High-frequency behaviour of the proposed filter is analysed by simulations. Finally, the thesis presents experimental data proving that the hybrid LC filter can be used for du/dt of PWM pulses and reduction of common-mode currents.
Resumo:
Chemical composition of leaf volatiles of Rosmarinus officinalis and Baccharis dracunculifolia cultured in Southeast of Brazil has been characterized by GC/MS after simultaneous distillation-extraction. The main components in volatiles of these species showed in common α-pinene, myrcene, 1,8 cineole and camphor. Camphor was the major component among volatiles of B. dracunculifolia and R. officinalis with concentrations exceeding 25%. B. dracunculifolia volatiles possessed more sesquiterpenes (21.4%) than R. officinalis (16.7%), such as caryophyllene (1.9%) and α-humulene (0.4%). Lower concentrations of nerolidol and spathulenol were achieved in volatiles of B. dracunculifolia. Considering both species, there was a predominance of monoterpenes.
Resumo:
Decomposition of carbon tetrachloride in a DC thermal plasma reactor was investigated in argon atmosphere. The operational parameters such as plasma torch power and argon flow rate versus CCl4 conversion were examined. The CCl4 net degradation was determined by GC-FID, the chlorine produced was quantified by iodometric titration, the solid carbon was characterised by Raman spectroscopy and by BET analysis. The solid carbon collected inside de plasma reactor was submitted to solid/liquid extraction and the desorbed species were identified by GC-MS.
Resumo:
From leaves of Senna spectabilis var. excelsa were isolated caffeine, the triterpenes lupeol, α-amyrin, β-amyrin, cycloeucalenol, friedelin and ursolic, oleanolic and betulinic acids, besides the steroids sitosterol and stigmasterol and their respective glucosides. The structures of these compounds were established by spectroscopic analysis including two-dimensional NMR methods and comparison with published spectral data. This paper deals with the first report of these compounds in S. spectabilis var. excelsa.
Resumo:
This work reports the chemical composition as well as the antibacterial, antifungal and antiparasitic activities of the leaf essential oil from Piper malacophyllum. The oil was extracted by hydrodistillation and analyzed by GC-FID, GC-MS and polarimetry. Among the 28 compounds identified, (+)-camphor was the major constituent. The essential oil showed activity against most of the microorganisms tested, especially antifungal action, with a MIC of 500 µg mL-1 against Trichophyton mentagrophytes and Cryptococcus neoformans. This is the first study reporting the composition and biological properties of leaf essential oil from P. malacophyllum.
Resumo:
The bioassay-guided purification of ethanolic extracts from inflorescences of Piper subtomentosum Trel. & Yunck and aerial part of Piper septuplinervium (Miq. ) C. DC. led to isolation of five flavonoids, uvangoletin (1), galangin (2), chrysin (5), 5-hydroxy-4',7-dimethoxy-flavone (6), pinostrobin (7); one amide, N-p-coumaroil-tyramine (4); one acylglycerol, monopalmitin (3); one derivative of acid, protocatechuic acid (8); and glycosydated sterol, daucosterol (9). Their structures were elucidated on the basis of spectroscopy and spectrometry data and by comparison with data reported in the literature. The isolated compounds were tested against Spodoptera frugiperda. The results showed galangin and protocatechuic acid to be the most active (LC 50 13.63 and 17.16 ppm, respectively).
Resumo:
In this thesis, analysis of electromagnetic compatibility of high-power photovoltaic solar plant is made. Current standards suitable for photovoltaic applications are given. Measurements of antenna factor for experimental setup are shown. Also, measurements of common mode disturbance voltages in high-power solar plant are given. Importance of DC-side filter is shown. In the last part of the work, electromagnetic simulations are made. These simulations show influence of several factors to EMC of power plant. Based on these simulations and measurements recommendations are given.
Resumo:
Acompanhou-se, durante 100 dias, o desenvolvimento de mudas de algaroba (Prosopis juliflora (Sw) DC) em relação à presença ou ausência de fungos micorrízicos arbusculares (FMA), nativos ou introduzidos, combinada com adição ou não de fósforo ao solo. Foi usado solo Podzólico Vermelho-Amarelo com pH ácido (4,7) e 2 mg.dm-3 de solo de P extraível por resina. O experimento teve delineamento inteiramente casualizado em arranjo fatorial com duas condições de solo (esterilizado ou não), três níveis de fósforo (acréscimo de 0, 50 e 100 kg de P.ha-1) e duas condições de inoculação (inoculado ou não), com quatro repetições. No solo não esterilizado, apenas o diâmetro do colo respondeu à inoculação com esporos de FMA, quando foi usada a dose P100; o aumento de altura, número de folhas e massa seca foi possivelmente devido à adição de fósforo ao solo. No solo esterilizado, a inoculação resultou no aumento de altura, número de folhas, diâmetro de colo e massa seca das mudas na presença ou na ausência de P (P0 e P50), em relação àquelas no solo não-inoculado. Com o aumento da dose de fósforo (P100), os benefícios da inoculação não foram mais verificados, sendo a colonização e a produção de esporos favorecidas pela adição de P ao solo. Prosopis juliflora foi considerada micotrófica facultativa, pois respondeu tanto à inoculação com FMA quanto à adição de fósforo.
Resumo:
A expansão da atividade madeireira e a elevada taxa de desmatamento na Amazônia têm intensificado a necessidade de estudos sobre as técnicas mais adequadas para a produção de mudas que possam ser usadas em atividades de reflorestamento e de plantio em florestas. Este estudo teve como objetivo avaliar: a) se a taxa de germinação de sementes de Pseudopiptadenia psilostachya difere entre sementes colhidas na copa e coletadas no chão da floresta; e b) qual o efeito do grau de sombreamento no viveiro sobre a germinação de sementes e o desenvolvimento inicial de plântulas dessa espécie. Seis repetições de 10 sementes colhidas na copa e coletadas no chão foram colocadas em germinador. A taxa de germinação não diferiu entre os dois métodos de obtenção de sementes, sendo recomendada a coleta de frutos no chão. No viveiro, quatro repetições de 25 sementes foram colocadas para germinar a pleno sol e em 30, 50 e 70% de sombra. Em cada tratamento de luz, 40 plântulas foram sorteadas, e sua "performance" foi avaliada quatro meses após a semeadura. Tanto a germinação das sementes quanto o crescimento em diâmetro e acúmulo de biomassa das plântulas foram superiores em 30 e 50% de sombreamento, em comparação com pleno sol. Os resultados indicaram que o crescimento de plântulas de P. psilostachya é favorecido em condições relativamente altas de iluminação, embora algum sombreamento seja necessário, e que a produção de mudas dessa espécie é de fácil execução, ao menos nos estágios iniciais de desenvolvimento das plântulas.