Cable laying and pulling

The common methods of cable laying are: • Direct in the ground in trenches (underground cables). • In cable trenches in outdoors switchyards. • In cable trays or cable ducts • Fixed with clamps (usually at walls and ceilings). • In conduits.

Primary biliary cirrhosis: proposal for a new simple histological scoring system

International audience

Modelagem da propagação sonora em dutos : abordagem matemática no domínio da frequência e do tempo utilizando transformada de laplace

Dissertação (mestrado)—Universidade de Brasília, Faculdade UnB Gama, Faculdade de Tecnologia, Programa de Pós-graduação em Integridade de Materiais da Engenharia, 2016.

Energy Audit for an Old Industrial Building in Gävle

(English)The Swedish industrial sector has overcome the oil crisis and has maintained the energy use constant even though the production has grown. This has been achieved thanks to the development of several energy policies, by the Swedish government, towards the 2020 goals. This thesis carries on this path and performs an energy audit for an old industrial building in Gävle (Sweden) in order to propose different energy efficiency measures to use less energy while maintaining the thermal comfort. The building is in quite a bad shape and some of the areas are unused making them a waste of money. By means of the invoices provided by different companies, the information from the staff and some measures that have been carried out in-situ, the energy balance has been calculated from where conclusions have been drawn. Although it is an industrial building, the study is not going to be focused in the industrial process but in the building’s envelope and support processes, since the unit combines both production and office areas. Therefore, the energy balance is divided in energy supplies (district heating, free heating and sun irradiation) and energy losses (transmission, ventilation hot tap water and infiltrations). The results show that the most important supply is that of the DH whereas the most important losses are the transmission and infiltration. Thus, the measures proposed are focused on the reduction of this relevant parameters. The most important measures are the renovation of the windows, heating systems valves and the ventilation. The glazing of the dwelling is old and some of it is broken accounting for quite a large amount of the losses. The radiator valves are not properly working and there does not exist any temperature control. Therefore the installation of thermostatic valves turns out to be a must. Moreover, some part of the building has no mechanical ventilation but conserves the ducts. These could be utilized if they are connected to the workshop’s ventilation which is capable of generating sufficient flow for the entire building. Finally, although other measures could also be carried out, the ones proposed appear to be the essential ones. A further analysis should be carried out in order to analyze the payback time or investment capability of the company so as to decide between one measure or another. A market study for possible new tenants for the unused parts of the building is also advisable.

Orientation and external morphology of burrows of the mangrove crab Ucides cordatus (Crustacea: Brachyura: Ucididae)

The aim of the present study was to characterize the external morphology and the orientation of burrows constructed by the mangrove crab Ucides cordatus. Data were obtained from two mangrove forests of similar vegetation dominance (Laguncularia racemosa) but differing in flooding heights. These mangroves were located near Barra de Icapara, Iguape City (SP), Brazil, (24 degrees 50'36 '' S-47 degrees 59'53'W). A total of 221 burrows were examined (120 on the high mangrove and 101 on the low mangrove). External morphology of the burrows was recorded by photographs for categorization and description. The directions of the burrow openings were recorded using a geological compass and the declivities of the ducts were measured with a clinometer. Females constructed 70.8% at Site A and 69.4% at Site B of the occupied burrows with the opening facing the margin of the river (P < 0.001), whilst males showed no significant difference in the burrow orientation (P > 0.05) at either site. In females, the tendency for burrow orientation possibly has a reproductive connotation as larval dispersal may be favoured and enhanced by the tides. Four groups of distinct tracks related to the morphotypes and developmental stages of U. cordatus were observed, No sediment constructions associated with the burrows were recorded for this species. Declivity of the burrows from juveniles was lower than from adults (P < 0.05), probably caused by the differential growth of the chelipeds in this species.

Structural features of the epididymal region of the domestic duck (Anas plathyrynchos)

A região epididimária do pato doméstico era composta pelos ductúlos eferentes, os quais hitotopologicamente foram caracterizados como dúctulos eferentes proximal e distal e, sequencialmente, pelo ducto epididimal. O epitélio dos dúctulos eferentes era pseudo-estratificado, formado por células colunares. O epitélio dos ductos epididimários mostrou-se também pseudo-estratificado, mas não ciliado. de acordo com as análises histomorfométricas, a média da altura epitelial foi significativamente maior nos dútulos esferentes distais, diferindo das baixas médias de altura epitelial observadas nos dúctulos eferentes proximais e ducto epididimal. A média dos diâmetros máximos e mínimos foi significativamente maior nos dúctulos eferentes proximais, comparativamente as médias dos mesmos diâmetros dos outros dúctulos.

Use of Fiber Reinforced Polymer Composite Cable for Post-tensioning Application

Corrosion of steel tendons is a major problem for post-tensioned concrete, especially because corrosion of the steel strands is often hard to detect inside grouted ducts. Non-metallic tendons can serve as an alternative material to steel for post-tensioning applications. Carbon fiber reinforced polymer (CFRP), given its higher strength and elastic modulus, as well as excellent durability and fatigue strength, is the most practical option for post-tensioning applications. The primary objective of this research project was to assess the feasibility of the use of innovative carbon fiber reinforced polymer (CFRP) tendons and to develop guidelines for CFRP in post-tensioned bridge applications, including segmental bridges and pier caps. An experimental investigation and a numerical simulation were conducted to compare the performance of a scaled segmental bridge model, post-tensioned with two types of carbon fiber strands and steel strands. The model was tested at different prestress levels and at different loading configurations. While the study confirms feasibility of both types of carbon fiber strands for segmental bridge applications, and their similar serviceability behavior, strands with higher elastic modulus could improve structural performance and minimize displacements beyond service loads. As the second component of the project, a side-by-side comparison of two types of carbon fiber strands against steel strands was conducted in a scaled pier cap model. Two different strand arrangements were used for post-tensioning, with eight and six strands, respectively representing an over-design and a slight under-design relative to the factored demand. The model was tested under service and factored loads. The investigation confirmed the feasibility of using carbon fiber strands in unbonded post-tensioning of pier caps. Considering both serviceability and overload conditions, the general performance of the pier cap model was deemed acceptable using either type of carbon fiber strands and quite comparable to that of steel strands. In another component of this research, creep stress tests were conducted with carbon fiber composite cable (CFCC). The anchorages for all the specimens were prepared using a commercially available expansive grout. Specimens withstood 95% of the guaranteed capacity provided by the manufacturer for a period of five months, without any sign of rupture.

Distribution and expression of leptin in major salivary glands of a hyperleptinemia animal model

Saliva production is mainly regulated by the autonomic nervous system (sympathetic and parasympathetic); however studies indicate a possible hormonal influence on the control of salivary secretion. This study aims to assess if the induction of increased levels of circulating leptin influence the immunohistochemical expression of leptin at the level of major salivary glands in Wistar rats. It was found that the expression, in qualitative terms, of leptin has been positive, being more evident in submandibular and sublingual glands, either in the acini or ducts. However, through this technique, no obvious differences between groups could be observed. The results suggest that circulating leptin levels may not affect the expression of this hormone in the major salivary glands.

Development of a robotic system for switchgear cabling

Industrial robots are an inalienable part of modern automated production. Typical applications of robots include welding, painting, (dis)assembly, packaging, labeling, palletizing, pick and place and others. Many of that applications includes object manipulation. If the shape and position of the object are known in advance, it is possible to design the trajectory of the robot’s end-effector to take and place. Such a strategy is applicable for rigid objects and widely used in the manufacturing field. But flexible (deformable) objects can change their shape and position upon contact with the robot’s end-effector or environment. That is the reason why the general approach is unacceptable. It means that the robot can fail to grasp such an object and can’t place it in the desired position. This thesis has addressed the problem of cable manipulation by bilateral robotic setup for the industrial manufacturing of electrical switchgear. The considered solution is based on the idea of tensioned cable. If the cable was grasped by the ends and tensioned, it has a line shape. Since the position of the robot’s end-effectors known, the position of the cable is known as well. Such an approach is capable to place cable in cable ducts of switchgear. The considered solution has been tested experimentally on a real bilateral robotic setup.