(Table 2) Composition of rain water collected over the Indian Ocean in 1967

Analytical data on the basic salt composition in evaporation products of sea (ocean) water and of rain water falling on the central area of the Indian Ocean are examined. Both hot and low-temperature (vacuum) distillation were used. When ocean water evaporates under calm conditions, sea salts in molecular-dispersed state, metamorphosed in the upper boundary layer, enter the atmosphere in addition to water vapor ("salt respiration of the ocean"). Concentration of these salts is about 0.5 mg per liter of water evaporated. Salts also enter the atmosphere from a foam-covered ocean surface as aerosols.

Sr/Ca and Cd/Ca ratios of benthic foraminifera in surface deep-sea sediments

Measurements of Sr/Ca of benthic foraminifera show a linear decrease with water depth which is superimposed upon significant variability identified by analyses of individual foraminifera. New data for Cd/Ca support previous work in defining a contrast between waters shallower and deeper than ~2500 m. Measured element partition coefficients in foraminiferal calcium carbonate relative to sea water (D) have been described by means of a one-box model in which elements are extracted by Rayleigh distillation from a biomineralization reservoir that serves for calcification with a constant fractionation factor (alpha), such that D = (1 - f**alpha)/(l - f), where f is the proportion of Ca remaining after precipitation. A modification to the model recognises differences in element speciation. The model is consistent with differences between D[Sr], D[Ba], and D[Cd] in benthic but not planktonic foraminifera. Depth variations in D for Sr and Ba are consistent with the model, as are differences in depth variation of D[Cd] in calcitic and aragonitic benthic foraminifera. The shallower depth variations may reflect increasing calcification rates with increasing water depth to an optimum of about 2500 m. Observations of unusually lower DCd for some deep waters, not accompanied by similar [Sr], or D[Ba] may be because of dissolution or a calcification response to a lower carbonate saturation state.

"Éros" y poesía en "Fedro", "Banquete" y "República": la reelaboración platónica de los terrenos poéticos para la realidad y el deseo

El trabajo explica el vínculo existente entre las distintas concepciones platónicas del éros y de la poesía, como parte del legado poético del siglo v. Y analiza su evolución, y la de su relación con la filosofía, en Fedro, Banquete y República, como un proceso de destilación del éros elaborado por la poesía, del que es afín el éros filosófico configurado en el Fedro, pero cuya incompatibilidad, insinuada en el Banquete, se hace explícita y taxativa en la República. Todo ello con el fin de demostrar hasta qué punto asume el pensamiento de Platón la herencia poética precedente, poniendo en evidencia que dicho proceso responde, en todas sus fases, a un mismo objetivo: materializar el anhelo poético por excelencia: la creación de un «terreno intermedio» donde conciliar la irrenunciable dualidad de las aspiraciones humanas. En consecuencia, se invita aquí a mirar la ciudad platónica como materialización posible, no utópica, de un espacio logrado en el que integrar armónicamente la realidad y el deseo.

Oil Flow Rate Measurements Using 198au And Total Count Technique

In industrial plants, oil and oil compounds are usually transported by closed pipelines with circular cross-section. The use of radiotracers in oil transport and processing industrial facilities allows calibrating flowmeters, measuring mean residence time in cracking columns, locate points of obstruction or leak in underground ducts, as well as investigating flow behavior or industrial processes such as in distillation towers. Inspection techniques using radiotracers are non-destructive, simple, economic and highly accurate. Among them, Total Count, which uses a small amount of radiotracer with known activity, is acknowledged as an absolute technique for flow rate measurement. A viscous fluid transport system, composed by four PVC pipelines with 13m length (12m horizontal and 1m vertical) and ½, ¾, 1 and 2-inch gauges, respectively, interconnected by maneuvering valves was designed and assembled in order to conduct the research. This system was used to simulate different flow conditions of petroleum compounds and for experimental studies of flow profile in the horizontal and upward directions. As 198Au presents a single photopeak (411,8 keV), it was the radioisotope chosen for oil labeling, in small amounts (6 ml) or around 200 kBq activity, and it was injected in the oil transport lines. A NaI scintillation detector 2”x 2”, with well-defined geometry, was used to measure total activity, determine the calibration factor F and, positioned after a homogenization distance and interconnected to a standardized electronic set of nuclear instrumentation modules (NIM), to detect the radioactive cloud.

Production économique d’un solvant vert à partir de dioxyde de carbone (CO2)

Depuis que l’industrie chimique vise à rejeter de moins en moins de gaz à effet de serre, cette dernière cherche à revaloriser les différents gaz à effet de serre tel que le dioxyde de carbone. Une des techniques est de combiner le dioxyde de carbone avec de l’ammoniac pour synthétiser l’urée qui pourrait par la suite être utilisé soit directement ou soit comme intermédiaire, pour la synthèse catalytique du diméthyle carbonate (DMC). Le DMC est à la base de plusieurs applications industrielles telles que la synthèse des polymères (les polycarbonates), les réactions de trans-estérification menant à d’autres carbonates comme le diphénylcarbonate et comme agent de méthylation ou d’alkylation. Plusieurs articles provenant de la littérature scientifique rapportent que le DMC peut être utilisé comme additif oxygéné dans les carburants tels l’essence [1]. Le but de ce projet est de déterminer la viabilité industrielle de la production de DMC par la méthylation de l’urée en premier lieu en méthyle carbamate puis en DMC. La première étape de ce projet reposera donc dans un premier temps sur la confirmation des résultats rapportés au sein de la littérature ouverte pour par la suite faire une étude de l’impact des différents types de catalyseurs et des conditions expérimentales sur le rendement de la réaction. Une fois que le montage batch sera optimisé, ce dernier sera modifié pour opérer en continu. Cette modification a pour but d’augmenter le rendement et la sélectivité pour éventuellement de l’adapter industriellement. Selon la littérature, les rendements anticipés pour la réaction batch sont d’environ 30 % [2] et pour un système en continu de plus de 50 %.

The role of glass modifiers in the solubility of Tm3+ ions in As2S3 glasses

Au cours des années une variété des compositions de verre chalcogénure a été étudiée en tant qu’une matrice hôte pour les ions Terres Rares (TR). Pourtant, l’obtention d’une matrice de verre avec une haute solubilité des ions TR et la fabrication d’une fibre chalcogénure dopée au TR avec une bonne qualité optique reste toujours un grand défi. La présente thèse de doctorat se concentre sur l’étude de nouveaux systèmes vitreux comme des matrices hôtes pour le dopage des ions TR, ce qui a permis d’obtenir des fibres optiques dopées au TR qui sont transparents dans l’IR proche et moyenne. Les systèmes vitreux étudiés ont été basés sur le verre de sulfure d’arsenic (As2S3) co-dopé aux ions de Tm3+ et aux différents modificateurs du verre. Premièrement, l’addition de Gallium (Ga), comme un co-dopant, a été examinée et son influence sur les propriétés d’émission des ions de Tm a été explorée. Avec l’incorporation de Ga, la matrice d’As2S3 dopée au Tm a montré trois bandes d’émission à 1.2 μm (1H5→3H6), 1.4 μm (3H4→3F4) et 1.8 μm (3F4→3H6), sous l’excitation des longueurs d’onde de 698 nm et 800 nm. Les concentrations de Tm et de Ga ont été optimisées afin d’obtenir le meilleur rendement possible de photoluminescence. À partir de la composition optimale, la fibre Ga-As-S dopée au Tm3+ a été étirée et ses propriétés de luminescence ont été étudiées. Un mécanisme de formation structurale a été proposé pour ce système vitreux par la caractérisation structurale des verres Ga-As-S dopés au Tm3+, en utilisant la spectroscopie Raman et l’analyse de spectrométrie d’absorption des rayons X (EXAFS) à seuil K d’As, seuil K de Ga et seuil L3 de Tm et il a été corrélé avec les caractéristiques de luminescence de Tm. Dans la deuxième partie, la modification des verres As2S3 dopés au Tm3+, avec l’incorporation d’halogénures (Iode (I2)), a été étudiée en tant qu’une méthode pour l’adaptation des paramètres du procédé de purification afin d’obtenir une matrice de verre de haute pureté par distillation chimique. Les trois bandes d’émission susmentionnées ont été aussi bien observées pour ce système sous l’excitation à 800 nm. Les propriétés optiques, thermiques et structurelles de ces systèmes vitreux ont été caractérisées expérimentalement en fonction de la concentration d’I2 et de Tm dans le verre, où l’attention a été concentrée sur deux aspects principaux: l’influence de la concentration d’I2 sur l’intensité d’émission de Tm et les mécanismes responsables pour l’augmentation de la solubilité des ions de Tm dans la matrice d’As2S3 avec l’addition I2.

Anise Myrtle (Syzygium anisatum) Oils

Syzygium anisatum (formerly Backhousia anisata and Anetholea anisata) is an Australian rainforest tree with leaves that produce an essential oil (EO) that has the characteristic aroma of aniseed. It is referred to as aniseed myrtle or anise myrtle in the trade and the fresh and dried leaves of this plant are used as a herb in culinary applications. The EO is extracted by steam distillation of the leaves and the major aromatic volatile compound is anethole. The EO has broad spectrum antimicrobial activity but is more effective against bacteria than fungi. Indigenous Australians have used anise myrtle for its medicinal values and in recent times it has been used as a flavoring agent by the food and beverage industry. This chapter covers the use of anise myrtle EO in food and agricultural applications, botanical aspects, and chemical composition.

Concentrating solar power + desalination plants (CSP+D): models and performance analysis

Tese submetida à Universidade de Lisboa, Instituto Superior Técnico e aprovada em provas públicas para a obtenção do Grau de Doutor em Sistemas Sustentáveis de Energia.

Análise do circuito de água de refrigeração de uma unidade de regeneração de solventes

A EGEO Solventes S.A. é uma empresa com atividade na área da gestão de resíduos, focando-se na regeneração de solventes. Na unidade industrial da empresa recorre-se à destilação de misturas de solventes usados para obtenção do solvente regenerado. Esta operação exige água para o arrefecimento e condensação dos destilados das misturas de solventes, que, posteriormente, é arrefecida em torres de refrigeração instaladas na unidade. Durante o tempo de operação da unidade foram identificados problemas na condensação dos solventes limpos, obrigando a que se ligassem dois condensadores em série para assegurar a condensação do vapor produzido na destilação e à necessidade de caudais maiores de utilidade fria. Outro dos problemas identificados foi a baixa eficiência das torres de refrigeração, uma vez que a diferença de temperaturas da água à entrada e à saída do equipamento é muito baixa. Assim sendo, o objetivo principal deste trabalho é identificar as principais causas para a baixa eficiência dos equipamentos e propor alterações aos equipamentos ou soluções de melhoria do processo. Para diagnosticar estes problemas foram recolhidas amostras para determinação da composição do solvente limpo obtido e registadas as condições de operação para obtenção da mistura ECOSOLVE MET. Recorrendo a metodologias de projeto determinou-se o fator de resistência do fouling no condensador C1 e seguidamente a geometria, a alocação de correntes e a orientação do condensador mais adequadas e concluiu-se que este está sujeito a uma forte acumulação de material nas paredes e que a melhor opção seria recorrer a um permutador horizontal com condensação na carcaça, mas aumentando o número de passagens da água nos tubos. No que diz respeito à operação da torre de arrefecimento, determinou-se o caudal mínimo de ar para determinadas condições de operação e verificou-se que o caudal de ar alimentado à torre era superior ao mínimo determinado. Foram observadas diferenças quando comparadas as condições de operação experimentais com a performance da unidade usando oito enchimentos estruturados e aleatórios para os quais há dados na literatura São também apresentadas alternativas de operação e o projeto de uma torre de arrefecimento de água, sustentada numa análise económica de todo o processo. As simulações foram realizadas com recurso ao AspenPlus®.

Análisis de la estática para la síntesis de furfural por destilación reactiva

Hoy día, se presta la atención a los derivados de furano y a los procesos catalíticos alrededor de éstos para la conversión de los azúcares contenidos en la biomasa lignocelulósica. En este sentido, el furfural también recibe una especial atención como potencial químico para la producción de bioproductos y biocombustibles. Debido a las dificultades presentadas en la separación del furfural en el proceso convencional, en este trabajo se presenta el análisis de la separación para obtener furfural de alta pureza a partir de xilosa deshidratada por destilación reactiva como proceso no convencional, aplicando la teoría básica de análisis estático para obtener la mejor información del proceso de destilación reactiva, obteniendo un esquema tecnológico que permite alcanzar una fracción molar de furfural de aproximadamente 0.9.

Selection of optimal operating conditions based on minimum energy consumption for an acrylonitrile recovery unit

The selection of the optimal operating conditions for an industrial acrylonitrile recovery unit was conducted by the systematic application of the response surface methodology, based on the minimum energy consumption and products specifications as process constraints. Unit models and plant simulation were validated against operating data and information. A sensitivity analysis was carried out in order to identify the set of parameters that strongly affect the trajectories of the system while keeping products specifications. The results suggest that energy savings of up to 10% are possible by systematically adjusting operating conditions.

Antimicrobial activity of the essential oils of Dittrichia viscosa subsp viscosa on Helicobacter pylori

Dittrichia viscosa subsp. viscosa (Compositae) is found on edges, wood clearings and in waste places of the Iberian Peninsula. Aerial parts of D. viscosa were collected at flowering phase in September-October 2001 around Lisbon, Portugal and the essential oils isolated by hydro-distillation for 4 h using a Clevenger-type apparatus. The oils were analyzed by gas chromatography and gas chromatography-mass spectrometry. Preliminary examination of the essential oils allowed the identification of 32 components. Only four components reached percentages over 5%: fokienol (11.8%), T-muurorol (7.9%), (E)-nerolidol (5.5%) and delta-cadinene (5.0%). The essential oils were tested against Helicobacterpylori and Listeria monocytogenes. Essential oils did not have antimicrobial activity against L. monocytogenes. The essential oil at 0.88 to 22.22 mu g.ml(-1) did not inhibit the growth of H. pylori, affected the growth slightly at 44.40 mu g.ml(-1), and completely inhibited the growth at 88.80 to 133.20 mu g.ml(-1) Results show that use of D. viscosa essential oil in the treatment of gastric disorders caused by H. pylori can be effective.

Aplicação de termogravimetria acoplada à espectrometria de massas para caracterização de petróleo e determinação da curva de evolução de gás sulfídrico

With the new discoveries of oil and gas, the exploration of fields in various geological basins, imports of other oils and the development of alternative fuels, more and more research labs have evaluated and characterized new types of petroleum and derivatives. Therefore the investment in new techniques and equipment in the samples analysis to determine their physical and chemical properties, their composition, possible contaminants, especification of products, among others, have multiplied in last years, so development of techniques for rapid and efficient characterization is extremely important for a better economic recovery of oil. Based on this context, this work has two main objectives. The first one is to characterize the oil by thermogravimetry coupled with mass spectrometry (TG-MS), and correlate these results with from other types of characterizations data previously informed. The second is to use the technique to develop a methodology to obtain the curve of evaluation of hydrogen sulfide gas in oil. Thus, four samples were analyzed by TG-MS, and X-ray fluorescence spectrometry (XRF). TG results can be used to indicate the nature of oil, its tendency in coke formation, temperatures of distillation and cracking, and other features. It was observed in MS evaluations the behavior of oil main compounds with temperature, the points where the volatilized certain fractions and the evaluation gas analysis of sulfide hydrogen that is compared with the evaluation curve obtained by Petrobras with another methodology

Determination of borneol and other chemical compounds of essential oil of Dryobalanops aromatica exudate from Malaysia

Purpose: To determine borneol and other chemical compounds of essential oil derived from the exudate of Dryobalanops aromatica aromatica in Malaysia. Methods: Exudate was collected from D. aromatica and subjected to fractional distillation to obtain essential oil. Gas chromatography-mass spectrometry (GC-MS) was performed to characterize the composition of the isolated essential oil. Results: Essential oil (7.58 %) was obtained with the highest yield (3.24 %) in the first 2 h of fractional distillation. Thirty compounds which accounted for 97.56 % of total essential oil composition were identified by GC-MS, and they include sesquiterpenes (46.87 %), monoterpenes (31.05 %), oxygenated monoterpenes (16.76 %) and oxygenated sesquiterpenes (2.13 %). Borneol (0.74 %) was also detected in the essential oil. Conclusion: Borneol and other terpenoid compounds are present in the essential oil of the exudate of D. aromatica

Antimicrobial activity of the essential oils of Dittrichia viscosa subsp viscosa on Helicobacter pylori

Dittrichia viscosa subsp. viscosa (Compositae) is found on edges, wood clearings and in waste places of the Iberian Peninsula. Aerial parts of D. viscosa were collected at flowering phase in September-October 2001 around Lisbon, Portugal and the essential oils isolated by hydro-distillation for 4 h using a Clevenger-type apparatus. The oils were analyzed by gas chromatography and gas chromatography-mass spectrometry. Preliminary examination of the essential oils allowed the identification of 32 components. Only four components reached percentages over 5%: fokienol (11.8%), T-muurorol (7.9%), (E)-nerolidol (5.5%) and delta-cadinene (5.0%). The essential oils were tested against Helicobacterpylori and Listeria monocytogenes. Essential oils did not have antimicrobial activity against L. monocytogenes. The essential oil at 0.88 to 22.22 mu g.ml(-1) did not inhibit the growth of H. pylori, affected the growth slightly at 44.40 mu g.ml(-1), and completely inhibited the growth at 88.80 to 133.20 mu g.ml(-1) Results show that use of D. viscosa essential oil in the treatment of gastric disorders caused by H. pylori can be effective.