Probabilistic cost benefit analysis of generation investment in a deregulated electricity market

A new methodology is proposed for the analysis of generation capacity investment in a deregulated market environment. This methodology proposes to make the investment appraisal using a probabilistic framework. The probabilistic production simulation (PPC) algorithm is used to compute the expected energy generated, taking into account system load variations and plant forced outage rates, while the Monte Carlo approach has been applied to model the electricity price variability seen in a realistic network. The model is able to capture the price and hence the profitability uncertainties for generator companies. Seasonal variation in the electricity prices and the system demand are independently modeled. The method is validated on IEEE RTS system, augmented with realistic market and plant data, by using it to compare the financial viability of several generator investments applying either conventional or directly connected generator (powerformer) technologies. The significance of the results is assessed using several financial risk measures.

Targets and self monitoring in hypertension: randomised controlled trial and cost effectiveness analysis

OBJECTIVES: To assess whether blood pressure control in primary care could be improved with the use of patient held targets and self monitoring in a practice setting, and to assess the impact of these on health behaviours, anxiety, prescribed antihypertensive drugs, patients' preferences, and costs. DESIGN: Randomised controlled trial. SETTING: Eight general practices in south Birmingham. PARTICIPANTS: 441 people receiving treatment in primary care for hypertension but not controlled below the target of < 140/85 mm Hg. INTERVENTIONS: Patients in the intervention group received treatment targets along with facilities to measure their own blood pressure at their general practice; they were also asked to visit their general practitioner or practice nurse if their blood pressure was repeatedly above the target level. Patients in the control group received usual care (blood pressure monitoring by their practice). MAIN OUTCOME MEASURES: Primary outcome: change in systolic blood pressure at six months and one year in both intervention and control groups. Secondary outcomes: change in health behaviours, anxiety, prescribed antihypertensive drugs, patients' preferences of method of blood pressure monitoring, and costs. RESULTS: 400 (91%) patients attended follow up at one year. Systolic blood pressure in the intervention group had significantly reduced after six months (mean difference 4.3 mm Hg (95% confidence interval 0.8 mm Hg to 7.9 mm Hg)) but not after one year (mean difference 2.7 mm Hg (- 1.2 mm Hg to 6.6 mm Hg)). No overall difference was found in diastolic blood pressure, anxiety, health behaviours, or number of prescribed drugs. Patients who self monitored lost more weight than controls (as evidenced by a drop in body mass index), rated self monitoring above monitoring by a doctor or nurse, and consulted less often. Overall, self monitoring did not cost significantly more than usual care (251 pounds sterling (437 dollars; 364 euros) (95% confidence interval 233 pounds sterling to 275 pounds sterling) versus 240 pounds sterling (217 pounds sterling to 263 pounds sterling). CONCLUSIONS: Practice based self monitoring resulted in small but significant improvements of blood pressure at six months, which were not sustained after a year. Self monitoring was well received by patients, anxiety did not increase, and there was no appreciable additional cost. Practice based self monitoring is feasible and results in blood pressure control that is similar to that in usual care.

Cost and performance analysis of new wood-fuelled power plant concepts

The objective of the thesis was to analyse several process configurations for the production of electricity from biomass. Process simulation models using AspenPlus aimed at calculating the industrial performance of power plant concepts were built, tested, and used for analysis. The criteria used in analysis were performance and cost. All of the advanced systems appear to have higher efficiencies than the commercial reference, the Rankine cycle. However, advanced systems typically have a higher cost of electricity (COE) than the Rankine power plant. High efficiencies do not reduce fuel costs enough to compensate for the high capital costs of advanced concepts. The successful reduction of capital costs would appear to be the key to the introduction of the new systems. Capital costs account for a considerable, often dominant, part of the cost of electricity in these concepts. All of the systems have higher specific investment costs than the conventional industrial alternative, i.e. the Rankine power plant; Combined beat and power production (CUP) is currently the only industrial area of application in which bio-power costs can be considerably reduced to make them competitive. Based on the results of this work, AsperiPlus is an appropriate simulation platform. How-ever, the usefulness of the models could be improved if a number of unit operations were modelled in greater detail. The dryer, gasifier, fast pyrolysis, gas engine and gas turbine models could be improved.

Rural road accidents in Iran: analysis, comparison and the cost

In the general introduction of the road-accident phenomenon inside and outside Iran, the results of previous research-works and international conferences and seminars on road-safety have been reviewed. Also a sample-road between Tehran and Mashad has been investigated as a case-study. Examining the road-accident data and iriformation,first: the information presented in road-accident report-forms in developed countries is discussed and, second: the procedures for road-accident data collection in Iran are investigated in detail. The data supplied by Iran Road-Police Central Statistics Office, is analysed, different rates are computed, due comparisons with other nations are made, and the results are discussed. Also such analysis and comparisons are presented for different provinces of Iran. It is concluded that each province with its own natural, geographical, social and economical characteristics possesses its own reasons for the quality and quantity of road-accidents and therefore must receive its own appropriate remedial solutions. The question~ of "what is the cost of road-accidents", "why and how evaluate the cost", "what is the appropriate way of approach to such evaluation" are all discussed and then "the cost of road-accidents in Iran" based on two different approaches: "Gross National Output"and "court award" is computed. It is concluded that this cost is about 1.5 per cent of the country's national product. In Appendix 3 an impressive example is given of the trend of costs and benefits that can be attributed to investment in road-safety measures.

Bagging model with cost sensitive analysis on diabetes data

Diabetes patients might suffer from an unhealthy life, long-term treatment and chronic complicated diseases. The decreasing hospitalization rate is a crucial problem for health care centers. This study combines the bagging method with base classifier decision tree and costs-sensitive analysis for diabetes patients' classification purpose. Real patients' data collected from a regional hospital in Thailand were analyzed. The relevance factors were selected and used to construct base classifier decision tree models to classify diabetes and non-diabetes patients. The bagging method was then applied to improve accuracy. Finally, asymmetric classification cost matrices were used to give more alternative models for diabetes data analysis.

Cost-benefit analysis of climate change – A methodological overview of recent studies

Global warming16 has already begun. Climate change has become a self-propelling and self-reinforcing process as a result of the externality associated with greenhouse- gas (GHG) emissions. Although it is an externality related to humankind, according to a number of unique features we should distinguish it from other externalities. Climate change is a global phenomenon in its causes and consequences. The long-term and persistent impacts of climate change will likely continue over centuries without further anthropogenic mechanism. The preindustrial (equilibrium) level of GHG concentration in the atmosphere cannot be restored since it is irreversible, but if we do not stabilise the actual level of atmospheric concentration, the situation will become much worse than it is now. Assessing the impacts of climate change requires careful considerations because of the pervasive uncertainties and risks associated with it.

Cost-Benefit Analysis of Climate Change (a Methodological Overview of Recent Studies)

This paper examines the methodological aspect of climate change, particularly the aggregation of costs and benefits induced by climate change on individuals, societies, economies and on the whole ecosystem. Assessing the total and/or marginal costs of environmental change is difficult because of wide range of factors that have to be involved. The subsequent study tries to capture the complexity of cost assessment on climate change therefore includes several critical factors such as scenarios and modeling, valuation and estimation, equity and discounting.

Systematic review and analysis of evidences on clinical efficacy and cost-effectiveness of biological drugs for the treatment of Ankylosing Spondylitis

Technology: Infliximab and comparator biological such as adalimumab, etanercept, golimumab. Conditions: Ankylosing spondylitis (AS) Issue: Infliximab is registered to be used in patients with AS. The aim of the Report is to evaluate the clinical efficacy and safety of infliximab and comparator biologicals for the treatment of adult AS. Methods: Systematic literature review and analysis as well as meta-analysis (direct and indirect comparison) of published randomised controlled clinical trials (RCT) were performed, all relevant health economics literature were identified ad analysed. Results: Clinical efficacy of biological therapies is based on good clinical evidences regarding to all clinical efficacy endpoints (ASAS20, ASAS40, ASAS 5/6, and BASDAI 50% response). Altogether, 22 trials are included in our meta-analysis, 12 infliximab, 3 adalimumab studies, 6 etanercept and 1 golimumab. Efficacy of biological treatments for the treatment of AS has been established by clinical scientific evidences, significant improvement at all outcomes considered was confirmed. According to the results of indirect comparison, there were no significant difference between biological treatments and placebo in terms of safety and tolerability endpoints. We found no significant difference between the clinical efficacy and safety of infliximab, adalimumab, etanercept and golimumab therapies. Cost-utility analysis of adalimumab and/or infliximab, etanercept and golimumab treatment for AS were performed in the UK, Canada, The Netherlands, Germany, Spain and France. There are no cost-utility studies from Eastern Central Europe. Implications for decision making: Efficacy of infliximab and comparator biologicals for the treatment of Ankylosing Spondylitis (AS) was proved by clinical evidence, significant improvement at all outcomes considered was confirmed. We found no significant differences in efficacy and safety of different biological treatments. Health economics results suggest that biological therapies are cost-effective alternatives for the treatment of AS in group of developed high income countries. There is a lack of health economics results in Central-Eastern European countries however these data are more and more required by governments and funders as part of the company economic dossiers.

Time, Cost, and Environmental Impact Analysis for Sustainable Design at Multiple Building Levels

Construction projects are complex endeavors that require the involvement of different professional disciplines in order to meet various project objectives that are often conflicting. The level of complexity and the multi-objective nature of construction projects lend themselves to collaborative design and construction such as integrated project delivery (IPD), in which relevant disciplines work together during project conception, design and construction. Traditionally, the main objectives of construction projects have been to build in the least amount of time with the lowest cost possible, thus the inherent and well-established relationship between cost and time has been the focus of many studies. The importance of being able to effectively model relationships among multiple objectives in building construction has been emphasized in a wide range of research. In general, the trade-off relationship between time and cost is well understood and there is ample research on the subject. However, despite sustainable building designs, relationships between time and environmental impact, as well as cost and environmental impact, have not been fully investigated. The objectives of this research were mainly to analyze and identify relationships of time, cost, and environmental impact, in terms of CO2 emissions, at different levels of a building: material level, component level, and building level, at the pre-use phase, including manufacturing and construction, and the relationships of life cycle cost and life cycle CO2 emissions at the usage phase. Additionally, this research aimed to develop a robust simulation-based multi-objective decision-support tool, called SimulEICon, which took construction data uncertainty into account, and was capable of incorporating life cycle assessment information to the decision-making process. The findings of this research supported the trade-off relationship between time and cost at different building levels. Moreover, the time and CO2 emissions relationship presented trade-off behavior at the pre-use phase. The results of the relationship between cost and CO2 emissions were interestingly proportional at the pre-use phase. The same pattern continually presented after the construction to the usage phase. Understanding the relationships between those objectives is a key in successfully planning and designing environmentally sustainable construction projects.

A Hard Bargain? A cost-benefit analysis of an improved cookstove program in India

In developing countries, access to modern energy for cooking and heating still remains a challenge to raising households out of poverty. About 2.5 billion people depend on solid fuels such as biomass, wood, charcoal and animal dung. The use of solid fuels has negative outcomes for health, the environment and economic development (Universal Energy Access, UNDP). In low income countries, 1.3 million deaths occur due to indoor smoke or air pollution from burning solid fuels in small, confined and unventilated kitchens or homes. In addition, pollutants such as black carbon, methane and ozone, emitted when burning inefficient fuels, are responsible for a fraction of the climate change and air pollution. There are international efforts to promote the use of clean cookstoves in developing countries but limited evidence on the economic benefits of such distribution programs. This study undertook a systematic economic evaluation of a program that distributed subsidized improved cookstoves to rural households in India. The evaluation examined the effect of different levels of subsidies on the net benefits to the household and to society. This paper answers the question, “Ex post, what are the economic benefits to various stakeholders of a program that distributed subsidized improved cookstoves?” In addressing this question, the evaluation used empirical data from India applied to a cost-benefit model to examine how subsidies affect the costs and the benefits of the biomass improved cookstove and the electric improved cookstove to different stakeholders.

An Empirical Analysis of Manufacturing Overhead Cost Drivers

Empirical validity of the claim that overhead costs are driven not by production volume but by transactions resulting from production complexity is examined using data from 32 manufacturing plants from the electronics, machinery, and automobile components industries. Transactions are measured using number of engineering change orders, number of purchasing and production planning personnel, shop- floor area per part, and number of quality control and improvement personnel. Results indicate a strong positive relation between manufacturing overhead costs and both manufacturing transactions and production volume. Most of the variation in overhead costs, however, is explained by measures of manufacturing transactions, not volume.