An exploratory non-LTE model atmosphere analysis of B-type supergiants in the Small Magellanic Cloud

A preliminary differential non-LTE model atmosphere analysis of moderate resolution (R ~ 5 000) and signal-to-noise ratio spectra of 48 Small Magellanic Cloud B-type supergiants is presented. Standard techniques are adopted, viz. plane-parallel geometry and radiative and hydrostatic equilibrium. Spectroscopic atmospheric parameters (T_eff, log g and v_turb), luminosities and chemical abundances (He, C, N, O, Mg and Si) are estimated. These are compared with those deduced for a comparable sample of Galactic supergiants. The SMC targets appear to have similar atmospheric parameters, luminosities and helium abundances to the Galactic sample. Their magnesium and silicon underabundances are compatible with those found for main sequence SMC objects and there is no evidence for any large variation in their oxygen abundances. By contrast both their carbon and nitrogen lines strengths are inconsistent with single abundances, while their nitrogen to carbon abundance ratios appear to vary by at least as much and probably more than that found in the Galactic sample.

Providing QoS for networked peers in distributed haptic virtual environments

Haptic information originates from a different human sense (touch), therefore the quality of service (QoS) required to supporthaptic traffic is significantly different from that used to support conventional real-time traffic such as voice or video. Each type ofnetwork impairment has different (and severe) impacts on the user’s haptic experience. There has been no specific provision of QoSparameters for haptic interaction. Previous research into distributed haptic virtual environments (DHVEs) have concentrated onsynchronization of positions (haptic device or virtual objects), and are based on client-server architectures.We present a new peerto-peer DHVE architecture that further extends this to enable force interactions between two users whereby force data are sent tothe remote peer in addition to positional information. The work presented involves both simulation and practical experimentationwhere multimodal data is transmitted over a QoS-enabled IP network. Both forms of experiment produce consistent results whichshow that the use of specific QoS classes for haptic traffic will reduce network delay and jitter, leading to improvements in users’haptic experiences with these types of applications.

THE INTERSTELLAR-MEDIUM

The interstellar medium is the tenuous gas that fills the space between the stars of our Galaxy. Though insignificant optically, its variety and richness are revealed in observations at other wavelengths. From relatively dense clouds of gas new stars are formed. The deme clouds show, through infrared and millimetre wave measurements, a complex chemistry. We describe in particular how an understanding of the chemistry brings with it information about the nature of the clouds and how they are evolving. We show how the techniques that have been developed for interstellar clouds may also be applied to circumstellar environments and to ejecta from transient dramatic events such as novae and supernovae.

A single microphone capillary-based system for measuring the complex input impedance of musical wind instruments

Capillary-based systems for measuring the input impedance of musical wind instruments were first developed in the mid-20th century and remain in widespread use today. In this paper, the basic principles and assumptions underpinning the design of such systems are examined. Inexpensive modifications to a capillary-based impedance measurement set-up made possible due to advances in computing and data acquisition technology are discussed. The modified set-up is able to measure both impedance magnitude and impedance phase even though it only contains one microphone. In addition, a method of calibration is described that results in a significant improvement in accuracy when measuring high impedance objects on the modified capillary-based system. The method involves carrying out calibration measurements on two different objects whose impedances are well-known theoretically. The benefits of performing two calibration measurements (as opposed to the one calibration measurement that has been traditionally used) are demonstrated experimentally through input impedance measurements on two test objects and a Boosey and Hawkes oboe. © S. Hirzel Verlag · EAA.

Measuring icon complexity: An automated analysis

Measures of icon designs rely heavily on surveys of the perceptions of population samples. Thus, measuring the extent to which changes in the structure of an icon will alter its perceived complexity can be costly and slow. An automated system capable of producing reliable estimates of perceived complexity could reduce development costs and time. Measures of icon complexity developed by Garcia, Badre, and Stasko (1994) and McDougall, Curry, and de Bruijn (1999) were correlated with six icon properties measured using Matlab (MathWorks, 2001) software, which uses image-processing techniques to measure icon properties. The six icon properties measured were icon foreground, the number of objects in an icon, the number of holes in those objects, and two calculations of icon edges and homogeneity in icon structure. The strongest correlates with human judgments of perceived icon complexity (McDougall et al., 1999) were structural variability (r(s) = .65) and edge information (r(s) =.64).

Forensic Geomorphology

Geomorphology plays a critical role in two areas of geoforensics: searching the land for surface or buried objects and sampling or imaging rural scenes of crime and control locations as evidence. Most of the associated geoscience disciplines have substantial bodies of work dedicated to their relevance in forensic investigations, yet geomorphology (specifically landforms, their mapping and evolution, soils and relationship to geology and biogeography) have had no such exposure. This is strange considering how fundamental to legal enquiries the location of a crime and its evolution are, as this article will demonstrate. This work aims to redress the balance by showing how geomorphology is featured in one of the earliest works on forensic science methods, and has continued to play a role in the sociology, archaeology, criminalistics and geoforensics of crime. The application geomorphology has in military/humanitarian geography and environmental/engineering forensics is briefly discussed as these are also regularly reviewed in courts of law

The Aran jumper: Crafting a Transatlantic Heritage

The garment we now recognise as the Aran jumper emerged as an international symbol of Ireland from the twin twentieth century transatlantic flows of migration and tourism. Its power as a heritage object derives from: 1) the myth commonly associated with the object, in which the corpse of a drowned fisherman is identified and claimed by his family due to the stitch patterns of his jumper (Pádraig Ó Síochain 1962; Annette Lynch and Mitchell Strauss 2014); 2) the meanings attached to those stitch patterns, which have been read, for example, as genealogical records, representations of the natural landscape and references to Christian and pre-Christian ‘Celtic’ religion (Heinz Kiewe 1967; Catherine Nash 1996); and 3) booming popular interest in textile heritage on both sides of the Atlantic, fed by the reframing of domestic crafts such as knitting as privileged leisure pursuits (Rachel Maines 2009; Jo Turney 2009). The myth of the drowned fisherman plays into transatlantic migration narratives of loss and reclamation, promising a shared heritage that needs only to be decoded. The idea of the garment’s surface acting as text (or map) situates it within a preliterate idyll of romantic primitivism, while obscuring the circumstances of its manufacture. The contemporary resurgence in home textile production as recreation, mediated through transnational online networks, creates new markets for heritage textile products while attracting critical attention to the processes through which such objects, and mythologies, are produced. The Aran jumper’s associations with kinship, domesticity and national character make it a powerful tool in the promotion of ancestral (or genealogical) tourism, through marketing efforts such as The Gathering 2013. Nash’s (2010; 2014) work demonstrates the potential for such touristic encounters to disrupt and enrich public conceptions of heritage, belonging and relatedness. While the Aran jumper has been used to commodify a simplistic sense of mutuality between Ireland and north America, it carries complex transatlantic messages in both directions.

Emotional response to images of wind turbines: A psychophysiological study of their visual impact on the landscape

Social acceptance for wind turbines is variable, providing a challenge to the implementation of this energy source. Psychological research could contribute to the science of climate change. Here we focus on the emotional responses to the visual impact of wind turbines on the landscape, a factor which dominates attitudes towards this technology. Participants in the laboratory viewed images of turbines and other constructions (churches, pylons and power-plants) against rural scenes, and provided psychophysiological and self-report measures of their emotional reactions. We hypothesised that the emotional response to wind turbines would be more negative and intense than to control objects, and that this difference would be accentuated for turbine opponents. As predicted, the psychophysiological response to turbines was stronger than the response to churches, but did not differ from that of other industrial constructions. In contrast with predictions, turbines were rated as less aversive and more calming compared with other industrial constructions, and equivalent to churches. Supporters and non-supporters did not differ significantly from each other. We discuss how a methodology using photo manipulations and emotional self-assessments can help estimate the emotional reaction to the visual impact on the landscape at the planning stage for new wind turbine applications.

Anomaly Detection for Data with Spatial Attributes

The problem of detecting spatially-coherent groups of data that exhibit anomalous behavior has started to attract attention due to applications across areas such as epidemic analysis and weather forecasting. Earlier efforts from the data mining community have largely focused on finding outliers, individual data objects that display deviant behavior. Such point-based methods are not easy to extend to find groups of data that exhibit anomalous behavior. Scan Statistics are methods from the statistics community that have considered the problem of identifying regions where data objects exhibit a behavior that is atypical of the general dataset. The spatial scan statistic and methods that build upon it mostly adopt the framework of defining a character for regions (e.g., circular or elliptical) of objects and repeatedly sampling regions of such character followed by applying a statistical test for anomaly detection. In the past decade, there have been efforts from the statistics community to enhance efficiency of scan statstics as well as to enable discovery of arbitrarily shaped anomalous regions. On the other hand, the data mining community has started to look at determining anomalous regions that have behavior divergent from their neighborhood.In this chapter,we survey the space of techniques for detecting anomalous regions on spatial data from across the data mining and statistics communities while outlining connections to well-studied problems in clustering and image segmentation. We analyze the techniques systematically by categorizing them appropriately to provide a structured birds eye view of the work on anomalous region detection;we hope that this would encourage better cross-pollination of ideas across communities to help advance the frontier in anomaly detection.

Following instructions in a virtual school: Does working memory play a role?

Accumulating evidence that working memory supports the ability to follow instructions has so far been restricted to experimental paradigms that have greatly simplified the practical demands of performing actions to instructions in everyday tasks. The aim of the present study was to investigate whether working memory is involved in maintaining information over the longer periods of time that are more typical of everyday situations that require performing instructions to command. Forty-two children 7–11 years of age completed assessments of working memory, a real-world following-instructions task employing 3-D objects, and two new computerized instruction-following tasks involving navigation around a virtual school to complete a sequence of practical spoken commands. One task involved performing actions in a single classroom, and the other, performing actions in multiple locations in a virtual school building. Verbal working memory was closely linked with all three following-instructions paradigms, but with greater association to the virtual than to the real-world tasks. These results indicate that verbal working memory plays a key role in following instructions over extended periods of activity.

Conformação automática de formas complexas em vidro de mesa

Os objectivos do presente trabalho foram a investigação dos principais defeitos que ocorrem nos produtos de vidro de mesa produzidos por processos automáticos e o desenvolvimento de novos vidros e tecnologias que permitam aumentar os rendimentos de produção, ou a flexibilidade da operação de conformação. A viscosidade influencia a facilidade de conformação dos produtos. Temperaturas de gota mais baixas, espessuras de parede de produtos mais elevadas e baixas áreas de transferência térmica facilitam a ocorrência de defeitos, sobretudo mecânicos e de superfície. Foram identificados os produtos de vidro de mesa que apresentam maiores dificuldades na conformação, designados por produtos de forma complexa. Por ser um factor relevante na prática, discutiu-se o efeito da quantidade de casco usado na elaboração dos vidros sobre a conformação de produtos de forma complexa. A quantidade de casco influencia a volatilização de fundentes que por sua vez tem efeito sobre as propriedades de trabalhabilidade do vidro. Desenvolveram-se novos vidros compatíveis com a utilização de queimos enriquecidos em oxigénio que são utilizados para reduzirem os defeitos mecânicos e de superfície nos produtos de vidros de mesa prensados. A compatibilidade vidro/tecnologia fez-se com uma modificação do sistema de afinação do vidro. Os vidros modificados apresentam propriedades físicoquímicas semelhantes à do vidro inicial e por isso indicam viabilidade comercial. A tecnologia dos canais corantes foi utilizada para modificar a trabalhabilidade de um vidro base a partir da introdução até 5 % de fritas incolores ricas em Li2O. Os valores de RMS (velocidade relativa de máquina) desceram de 106,8 % para 95,7 % enquanto os valores de Pt (patamar de trabalho) subiram de 100,6 s para 111,3 s com o aumento de frita. As propriedades físico-químicas dos vidros aditivados com frita indicam viabilidade comercial. Esta inovação tecnológica introduz flexibilidade nos processos industriais vidreiros. A composição química do vidro e por isso as propriedades relacionadas com a trabalhabilidade podem ser entendidas como mais uma variável dos processos de conformação e usadas em função das técnicas de conformação disponíveis, da forma dos objectos a conformar e da engenharia da ferramenta moldante utilizada. Foi observada convergência entre os resultados experimentais e os valores calculados a partir dos modelos de Huff e Fluegel nos principais parâmetros da tecnologia vidreira (RMS e Pt) e nas propriedades dos vidros nomeadamente densidade e coeficiente de dilatação térmico. Uma parte importante deste trabalho decorreu em ambiente industrial. Em temas relacionados com a investigação do processamento vidreiro industrial, a prática de desenvolver trabalho experimental integrado no próprio ambiente industrial está claramente documentada na bibliografia publicada em revistas e jornais de referência internacional. ABSTRACT: The research on the causes of major defects that occur in glass tableware products produced by automatic processes and the development of new glasses and technologies for increasing the production efficiency, or the flexibility of operation were the objectives of the Thesis project. Viscosity influences the flexibility of glass forming. Lower drop temperatures, high product wall thicknesses, or low areas of heat transfer facilitate the occurrence of defects, mainly mechanical and surface born. We identified the products of glass tableware showing the greatest difficulties in forming, designated as complex shape products. The effect of the amount of recycled glass used in the preparation of glass batches on the conformation of products of complex shapes and on glass workability is discussed. The amount of recycled glass affects the volatilization of glass modifiers which in turn have an effect on the glass properties and workability. New glasses which become compatible with the use of oxygen burners were formulated, tested and developed to the industrial use, oxygen enrichment being used to reduce the mechanical and surface defects in pressed glass tableware. Compatibility glass / technology was achieved with a modified system of tuning of the glass. The modified glasses have physical and chemical properties similar to the original glass and therefore are commercially viable. The technology of the colouring channels was used to change glass workability of a glass base by the introduction of up to 5 % Li2O rich in colourless frit. The values of RMS (relative machine speed) fell from 106.8 % to 95.7 % while the values of Pt (cooling time) increased from 100.6 s to 111.3 s by the introduction of glass frits. The physico-chemical properties of the modified glass show commercial viability. This technology introduces flexibility in industrial processes of glass. The chemical composition of glass and therefore the properties related to workability can be understood as another variable of the glass forming processes and used according to the available forming techniques, the shape of objects and the engineering tools used for the moulds. Convergence was observed between experimental and predicted from Huff and Fluegel models in studying the properties of glasses. An important part of this work was done inside the industrial environment. On issues related to the investigation of the glass processing inside the industry, the practice of developing experimental work integrated in the industrial environment is clearly documented and referenced in the published literature in international journals and periodicals.

A construção escolar do plano nacional de leitura: um estudo num agrupamento de escolas do ensino básico

As medidas políticas tornam-se palco dos processos de apropriação e recepção que se desenvolvem a vários níveis, especificamente, na escola, na sociedade civil e na comunidade científica. A escola apresenta-se, neste processo, como um dos cenários em que alunos, pais e, em especial, os professores surgem como actores que reinterpretam o discurso oficial, reconhecendo nele potencialidades e limites, em face das suas expectativas, concepções e práticas, e que procedem à sua transposição pedagógica, através dos objectivos que seleccionam, dos objectos que lêem, das actividades e dos recursos mobilizados. A relevância social da leitura, a sua centralidade e transversalidade curriculares, assim como o investimento político no domínio da promoção leitora, na escola, através da criação do Plano Nacional de Leitura, fazem desta medida política, um campo privilegiado para a análise dos modos de recepção desenvolvidos pelos professores. Enquadrado numa perspectiva descritiva e interpretativa da investigação em Didáctica, assumindo a importância da construção pessoal e colectiva da leitura e dos leitores num quadro escolar, este estudo baseia-se no pressuposto de que a promoção da leitura, na escola, tendo como referência o PNL, terá de se ancorar no conhecimento sobre os modos de recepção desta medida política. Partindo de um desenho metodológico assente num estudo de caso, recolhemos dados, de natureza qualitativa e quantitativa, que nos permitem conhecer e interpretar a relação de um agrupamento de escolas do ensino básico com as práticas de leitura realizadas no âmbito do PNL. O percurso de análise e reflexão que construímos durante este estudo permitiu-nos sobretudo evidenciar a receptividade às propostas políticas, de nível global, actualizadas numa lógica de especificidade local. Constituem lugares de maior adesão, por parte dos professores, o reconhecimento das potencialidades do PNL, especificamente, o alargamento do fundo bibliográfico, o aumento das práticas de leitura, o maior conhecimento de diferentes géneros textuais e a possibilidade de integrar o livro nas práticas de leitura. O processo de interpretação destas propostas aparece contudo atravessado por tensões e ambiguidades. Entre os lugares de resistência, verifica-se uma certa dificuldade em desenvolver competências de leitura, de diversificação de textos e de modos de os ler. O estudo pretende constituir um contributo para o alargamento do conhecimento sobre os processos de construção escolar da leitura, de recepção desenvolvidos pelos professores, no âmbito do PNL, apresentando igualmente pistas para a avaliação das possibilidades de desenvolvimento e consecução desta medida política, assim como para a definição de políticas de formação contínua de professores.

The alternating least-squares algorithm for CDPCA

Clustering and Disjoint Principal Component Analysis (CDP CA) is a constrained principal component analysis recently proposed for clustering of objects and partitioning of variables, simultaneously, which we have implemented in R language. In this paper, we deal in detail with the alternating least-squares algorithm for CDPCA and highlight its algebraic features for constructing both interpretable principal components and clusters of objects. Two applications are given to illustrate the capabilities of this new methodology.

Scholarly chronographics: can a timeline be useful in historiography?

Our paper is concerned with the visualisation of historical events and artefacts in the context of time. It arises from a project bringing together expertise in visualisation, historiography and software engineering. The work is the result of an extended enquiry over several years which has included investigation of the prior history of such chronographics and their grounding in the temporal ontology of the Enlightenment. Timelines - visual, spatial presentations of chronology - are generally regarded as being too simple, perhaps too childish, to be worthy of academic attention, yet such chronographics should be capable of supporting sophisticated thinking about history and historiography, especially if they take full advantage of the capabilities of digital technologies. They should enable even professional academic historians to 'make sense' of history in new ways, allowing them insights they would not otherwise have achieved. In our paper we highlight key findings from the history of such representations, principally from the eighteenth and nineteenth centuries, and show how, in a project to develop new digital chronographics for collections of cultural objects and events, we have explored new implementations of the important ideas we have extracted about timewise presentation and interaction. This includes the representation of uncertainty, of relations between events, and the epistemology of time as a 'space' for history. We present developed examples, in particular a chronographic presentation of a large database of works by a single author, a composer, and discuss the extent to which our ambitions for chronographics have been realised in practice. Keywords: timeline, chronographics