Mapas de complementaridade dos potenciais solar e eólico no estado do Rio Grande do Sul

A energia solar e a energia eólica são fontes de energias renováveis com potencial inesgotável e que não liberam contaminantes ao meio ambiente. O uso destas energias em conjunto, explorando a sua complementaridade, pode viabilizar economicamente e permitir um uso confiável deste sistema, denominado sistema híbrido fotovoltaico-eólico, podendo ser um sistema autônomo de geração de energia elétrica. Dependendo das aplicações, o sistema híbrido fotovoltaico-eólico pode apresentar vantagens em comparação ao sistema que utiliza somente uma das fontes de energia solar ou eólica, dito singelo. A elaboração de mapas de complementaridade dos potenciais solar e eólico no Estado do Rio Grande do Sul, permitiria um melhor aproveitamento de sistemas híbridos fotovoltaico-eólico neste Estado do Brasil. O uso desses mapas é de grande valia para a identificação de potenciais locais geográficos para o emprego de sistemas híbridos fotovoltaico-eólico no Estado do Rio Grande do Sul. Através de uma pesquisa dos dados existentes e dos métodos utilizados para estimar a radiação solar e a velocidade dos ventos, obtiveram-se valores das médias trimestrais correspondentes às quatro estações do ano (verão, outono, inverno e primavera) e a média anual, que possibilitaram a elaboração dos mapas de complementaridade dos potenciais solar e eólico para serem utilizados em sistemas híbridos fotovoltaico-eólico no Estado do Rio Grande do Sul para estes períodos. A metodologia utilizada para a obtenção dos dados de mapas da velocidade dos ventos a 10 metros de altura no Estado do Rio Grande do Sul fez uso de um programa de leitura de mapas de velocidade do vento a 50 metros de altura e de rugosidade e, após foi feita a correção para obtenção da velocidade do vento a 10 metros de altura. Os dados referentes à radiação solar horizontal também sofreram uma correção da inclinação, para a obtenção da radiação incidente em uma superfície inclinada, de forma a obter-se o melhor rendimento do módulo fotovoltaico. A conclusão obtida é que existem regiões no Estado do Rio Grande do Sul que apresentam um potencial energético fotovoltaico-eólico que viabilizariam o uso dos sistemas híbridos fotovoltaico-eólico, possibilitando uma opção a mais para o uso de energias alternativas.

Morfologia, estrutura celular, metabolismo, nutrição e multiplicação de bactérias e leveduras

Unidade 2

Seleção de leveduras

Disciplina Monitoramento e Controle Microbiológico em Usinas. Unidade 7

Estudo da qualidade do ar interior em infantários da Região Autónoma da Madeira

Presentemente as pessoas passam cerca de 90% da sua vida no interior de edifícios, onde a poluição atinge níveis superiores aos registados no exterior. Os infantários são espaços onde a qualidade do ar interior (QAI) deverá ser alvo de maior preocupação, visto ser o local onde as crianças passam uma fase importante do seu desenvolvimento físico-motor. São vários os poluentes que podem comprometer a saúde humana, de entre os quais se destacam os poluentes biológicos, os químicos, e os físico-químicos. O presente trabalho teve como objectivo analisar a QAI em onze infantários da Ilha da Madeira durante as quatro estações do ano. Para o estudo foi levado em consideração a dispersão geográfica e a envolvente rural e urbana. Complementarmente, foi efectuado um estudo aprofundado dos compostos orgânicos voláteis (COVs) em dois dos infantários, com o emprego de amostragem activa e passiva. Nos infantários em análise, verificou-se a existência de um sério problema de renovação do ar no interior das salas, reflectido nas elevadas concentrações de CO2 e bactérias encontradas durante a monitorização dos espaços. As concentrações de fungos raramente excederam o valor máximo de referência (VMR), sendo o Penicillium spp. e o Cladosporium sp., as espécies mais comuns encontradas. Contudo foram detectadas algumas espécies consideradas perigosas para a saúde humana, como o Aspergillus niger e o A. versicolor. Relativamente aos restantes parâmetros (CO, O3, HCHO, NO2, NO, SO2, H2S, PM10, T e HR), na sua generalidade apresentaram concentrações inferiores aos respectivos VMR: excepção para o HCHO que em 40% das análises revelou valores acima do seu VMR, bem como a T e HR, que apresentaram valores fora das respectivas escalas de referência. Não foram encontradas diferenças significativas na QAI entre os onze infantários no que diz respeito à sua localização geográfica e envolvente. No entanto, em alguns parâmetros foram observadas variações sazonais. O estudo dos perfis de COVs revelou que o tipo de amostragem a empregar deve ter em consideração o objectivo da recolha: se for necessária a obtenção de dados como um flash instantâneo, a utilização da amostragem activa é aconselhada, se forem requeridos dados médios de um determinado período de tempo, o emprego da amostragem passiva será a melhor escolha.

Avaliação das atividades antioxidantes e citotóxicas de extratos ricos em polissacarídeos extraídos das hastes de mandacaru (Cereus Jamacaru de Candolle, Cactaceae)

The use of medicinal plants to cure and treat various diseases is a common practice in the world and in Brazil. In several regions of the Brazil´s Northeast, the cactus Cereus jamacaru, known as mandacaru, is used popularly as a treatment to many diseases, including those related to heart respiratory diseases, gastric ulcers, scurvy, and kidney diseases. However, there is a scarcity in the scientific literature that proves scientifically the popular application of this cactus. Like other plants, Cereus jamacaru synthesizes several potentially bioactive molecules, like as polysaccharides. In this work, three polysaccharides-rich aqueous extracts, MCA80, MPM and MCP60, were obtained from this plant and analyzed chemically, as well as their cytotoxic and antioxidant potential. The data showed that all extracts consist mainly of polysaccharides (89.42 to 95.76%), but also protein (> 2%) and phenolic (3 to 8.87%) contaminants were detected. All extracts are rich in galactose, glucose and mannose. In addition, glucuronic acid was found in MCA80 and MCP60. The extracts showed total antioxidant capacity ranged from 55.21 to 68.13 of ascorbic acid equivalents (AAE). Besides, they exhibited reducer power and cupric chelation in a dose-dependent manner. None of the extracts inhibited the MTT reduction in the presence of prostate tumor cells (PC-3). However, MCP60 was the most effective extract by preventing the reduction of MTT by about 80% in the presence of cells 786. Nuclear fragmentation tests showed that this extract induces cell death. The data indicated that mandacaru synthesizes bioactive polysaccharides with potential as antioxidant and antitumor agents. For future studies, it is intended to purify and characterize these polysaccharides and its antioxidant and antitumor mechanisms

Análise por meio de espectroscopia de emissão óptica das espécies ativas em nitretação iônica e gaiola catódica

Plasma process like ionic nitriding and cathodic cage plasma nitriding are utilized in order to become hard surface of steels. The ionic nitriding is already accepted in the industry while cathodic cage plasma nitriding process is in industrial implementation stage. Those process depend of plasma parameters like electronic and ionic temperature (Te, Ti), species density (ne, ni) and of distribution function of these species. In the present work, the plasma used to those two processes has been observed through Optical Emission Spectroscopy OES technique in order to identify presents species in the treatment ambient and relatively quantify them. So plasma of typical mixtures like N2 H2 has been monitored through in order to study evolution of those species during the process. Moreover, it has been realized a systematic study about leaks, also thought OES, that accomplish the evolution of contaminant species arising because there is flux of atmosphere to inside nitriding chamber and in what conditions the species are sufficiently reduced. Finally, to describe the physic mechanism that acts on both coating techniques ionic nitriding and cathodic cage plasma nitriding

Síntese de zeólita A a partir de diatomita como fonte de aluminossilicato

The synthesis of zeolites from natural sources of silicon and aluminum are promising alternative routes to obtain porous or zeolite MCM family. Such materials are typically used in catalytic processes and / or adsorption is to obtain new products or for separation and purification processes thereof. Environmental legislation is becoming stricter and requires the use of materials more efficient, aiming to achieve pollution prevention, by gas or liquid contaminants in the environment. In order to obtain a material with environmentally friendly features, this study aimed at the synthesis of zeolite A, from an amorphous sediment, diatomite, which is found in abundance in the northeast region of Brazil, may be substituted for conventional products the production of zeolite, involving higher costs. The methodology for obtaining the "Zeolite A" using as a source of silica and alumina diatomite is simple, since this is a source of silicon, not requiring therefore a structural driver, but also by heat treatment, only drying conventional to remove water. The "zeolite A" was obtained from diatomite, but as an intermediate step we obtained the sodalite. The characterization was made by the following techniques: EDX, XRD, FT-IR, SEM and determining a specific area by the BET method and the BJH method for checking the diameter of pores. By characterization of the obtained material was first demonstrated the achievement of sodalite and after modification of the same, there was obtained zeolite A

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Avaliação do efeito de particulados sólidos na eficiência de um inibidor de corrosão recomendado para meios salinos com CO2

The main problem on the exploration activity on petroleum industry is the formation water resulted on the fields producing. The aggravating of this problem is correlated with the advancing technologies used on the petroleum extractions and on its secondary approach objecting the reobtainment of this oil. Among the main contaminants of the water formation are corrosives gases such as: O2, CO2 and H2S, some solids in suspension and dissolved salts. Concerning to those gases the CO2 is the one that produce significant damage for carbon steel on corrosion process of the petroleum and gas industries. Corrosion inhibitors for carbon steel in formation water is one of the most used agents in control of those damages. In this context, the poor investigations of carbon steel corrosion proceeding from solids in suspension is an opened field for studies. On this work the inhibitor effect of the commercial CORRTREAT 703 was evaluated on some specific solids in suspension at saline medium containing 10.000 ppm of de-aerated chloride using CO2 until non oxygen atmosphere been present. For that, quartz, calcium carbonate, magnetite and iron sulphide were subjected to this investigation as the selected solids. The effect of this inhibitor on corrosion process correlated with those specific solids, was measured using electrochemical (resistance of linear polarization and galvanic pair) and gravimetrical techniques. During all the experimental work important parameters were monitored such as: pH, dissolved oxygen, temperature, instantaneous corrosion rate and galvanic current. According to the obtained results it was proved that the suspension solids calcium carbonate and iron sulphide decrease the corrosion process in higher pH medium. Meanwhile the quartz and magnetite been hardness increase corrosion by broking of the passive layer for erosion. In the other hand, the tested inhibitor in concentration of 50 ppm, showed to be effective (91%) in this corrosion process

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal

Aplicação de termogravimetria acoplada à espectrometria de massas para caracterização de petróleo e determinação da curva de evolução de gás sulfídrico

With the new discoveries of oil and gas, the exploration of fields in various geological basins, imports of other oils and the development of alternative fuels, more and more research labs have evaluated and characterized new types of petroleum and derivatives. Therefore the investment in new techniques and equipment in the samples analysis to determine their physical and chemical properties, their composition, possible contaminants, especification of products, among others, have multiplied in last years, so development of techniques for rapid and efficient characterization is extremely important for a better economic recovery of oil. Based on this context, this work has two main objectives. The first one is to characterize the oil by thermogravimetry coupled with mass spectrometry (TG-MS), and correlate these results with from other types of characterizations data previously informed. The second is to use the technique to develop a methodology to obtain the curve of evaluation of hydrogen sulfide gas in oil. Thus, four samples were analyzed by TG-MS, and X-ray fluorescence spectrometry (XRF). TG results can be used to indicate the nature of oil, its tendency in coke formation, temperatures of distillation and cracking, and other features. It was observed in MS evaluations the behavior of oil main compounds with temperature, the points where the volatilized certain fractions and the evaluation gas analysis of sulfide hydrogen that is compared with the evaluation curve obtained by Petrobras with another methodology

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Avaliação do petróleo por termogravimetria para simulação de curva PEV, fator de caracterização e resíduo de carbono

Petroleum evaluation is analyze it using different methodologies, following international standards to know their chemical and physicochemical properties, contaminant levels, composition and especially their ability to generate derivatives. Many of these analyzes consuming a lot of time, large amount of samples , supplies and need an organized transportation logistics, schedule and professionals involved. Looking for alternatives that optimize the evaluation and enable the use of new technologies, seven samples of different centrifuged Brazilian oils previously characterized by Petrobras were analyzed by thermogravimetry in 25-900° C range using heating rates of 05, 10 and 20ºC per minute. With experimental data obtained, characterizations correlations were performed and provided: generation of true boiling point curves (TBP) simulated; comparing fractions generated with appropriate cut standard in temperature ranges; an approach to obtain Watson characterization factor; and compare micro carbon residue formed. The results showed a good chance of reproducing simulated TBP curve from thermogravimetry taking into account the composition, density and other oil properties. Proposed correlations for experimental characterization factor and carbon residue followed Petrobras characterizations, showing that thermogravimetry can be used as a tool on oil evaluation, because your quick analysis, accuracy, and requires a minimum number of samples and consumables

Ecotoxicological assessment of sediments from the Santos and São Vicente estuarine system- Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hematological analysis of Micropogonias Furnieri, Desmarest, 1823, Scianidae, from two estuaries of Baixada Santista, São paulo Brazil

Alterações hematológicas em peixes são consideradas uma importante ferramenta para avaliar processos patológicos decorrentes da exposição a poluentes ambientais. Micropogonias furnieri (Desmarest, 1823) (corvina) é comumente encontrada em regiões estuarinas e eventualmente está exposta a inúmeros contaminantes. No presente estudo foi avaliado o quadro hematológico de indivíduos de M. furnieri coletados na Baixada Santista: o Sistema Estuarino de Santos, considerado poluído, e o estuário do Rio Itanhaém (controle). Foram avaliados o número de Eritrócitos (Er), o Hematócrito (Ht), a taxa de Hemoglobina (Hb), o Volume Corpuscular Médio (VCM) e a Concentração de Hemoglobina Corpuscular Média (CHCM). Nos peixes coletados no Sistema Estuarino de Santos, os níveis de Ht foram significativamente menores, enquanto os níveis de CHCM e Hb foram significativamente mais altos, indicando que os prováveis efeitos estejam atribuídos aos diferentes níveis de contaminação encontrados nos estuários.