Reliability and quality in the area of statistical thinking in Engineering

There is remarkable growing concern about the quality control at the time, which has led to the search for methods capable of addressing effectively the reliability analysis as part of the Statistic. Managers, researchers and Engineers must understand that 'statistical thinking' is not just a set of statistical tools. They should start considering 'statistical thinking' from a 'system', which means, developing systems that meet specific statistical tools and other methodologies for an activity. The aim of this article is to encourage them (engineers, researchers and managers) to develop a new way of thinking.

Simulation-based evaluation of susceptibility distortion correction methods in diffusion MRI for connectivity analysis

Connectivity analysis on diffusion MRI data of the whole-brain suffers from distortions caused by the standard echo-planar imaging acquisition strategies. These images show characteristic geometrical deformations and signal destruction that are an important drawback limiting the success of tractography algorithms. Several retrospective correction techniques are readily available. In this work, we use a digital phantom designed for the evaluation of connectivity pipelines. We subject the phantom to a “theoretically correct” and plausible deformation that resembles the artifact under investigation. We correct data back, with three standard methodologies (namely fieldmap-based, reversed encoding-based, and registration- based). Finally, we rank the methods based on their geometrical accuracy, the dropout compensation, and their impact on the resulting connectivity matrices.

Transactional failure recovery for a distributed key-value store

With the advent of cloud computing, many applications have embraced the ensuing paradigm shift towards modern distributed key-value data stores, like HBase, in order to benefit from the elastic scalability on offer. However, many applications still hesitate to make the leap from the traditional relational database model simply because they cannot compromise on the standard transactional guarantees of atomicity, isolation, and durability. To get the best of both worlds, one option is to integrate an independent transaction management component with a distributed key-value store. In this paper, we discuss the implications of this approach for durability. In particular, if the transaction manager provides durability (e.g., through logging), then we can relax durability constraints in the key-value store. However, if a component fails (e.g., a client or a key-value server), then we need a coordinated recovery procedure to ensure that commits are persisted correctly. In our research, we integrate an independent transaction manager with HBase. Our main contribution is a failure recovery middleware for the integrated system, which tracks the progress of each commit as it is flushed down by the client and persisted within HBase, so that we can recover reliably from failures. During recovery, commits that were interrupted by the failure are replayed from the transaction management log. Importantly, the recovery process does not interrupt transaction processing on the available servers. Using a benchmark, we evaluate the impact of component failure, and subsequent recovery, on application performance.

Technical criteria for the desing of foundation slabs and perimetral wall in difficult terrain in Madrid. Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Technical criteria for the design of foundation slabs and perimetral wall in difficult terrain in south east Madrid, Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Practical issues for testing thin film PV modules at standard test conditions.

Thin film photovoltaic (TF) modules have gained importance in the photovoltaic (PV) market. New PV plants increasingly use TF technologies. In order to have a reliable sample of a PV module population, a huge number of modules must be measured. There is a big variety of materials used in TF technology. Some of these modules are made of amorphous or microcrystalline silicon. Other are made of CIS or CdTe. Not all these materials respond the same under standard test conditions (STC) of power measurement. Power rates of the modules may vary depending on both the extent and the history of sunlight exposure. Thus, it is necessary a testing method adapted to each TF technology. This test must guarantee repeatability of measurements of generated power. This paper shows responses of different commercial TF PV modules to sunlight exposure. Several test procedures were performed in order to find the best methodology to obtain measurements of TF PV modules at STC in the easiest way. A methodology for indoor measurements adapted to these technologies is described.

Electricity production usíng different photovoltaic technologies working at the same conditíons , a real case

The manufacture of photovoltaic (PV) modules has greatly increased in the past few years. The classical PV module is based on crystalline silicon (e-Si) , nevertheless the so called thinfilm technology is gaining importance each year. In this research paper we present a experimental grid-connected solar plant situated in one of the buildings of the Technical University of Madrid, with two main objectives.

Background and approach to a definition of smart buildings

There is no doubt that there is no possibility of finding a single reference about domotics in the first half of the 20th century. The best known authors and those who have documented this discipline, set its origin in the 1970’s, when the x-10 technology began to be used, but it was not until 1988 when Larousse Encyclopedia decided to include the definition of "Smart Building". Furthermore, even nowadays, there is not a single definition widely accepted, and for that reason, many other expressions, namely "Intelligent Buildings" "Domotics" "Digital Home" or "Home Automation" have appeared to describe the automated buildings and homes. The lack of a clear definition for "Smart Buildings" causes difficulty not only in the development of a common international framework to develop research in this field, but it also causes insecurity in the potential user of these buildings. That is to say, the user does not know what is offered by this kind of buildings, hindering the dissemination of the culture of building automation in society. Thus, the main purpose of this paper is to propose a definition of the expression “Smart Buildings” that satisfactorily describes the meaning of this discipline. To achieve this aim, a thorough review of the origin of the term itself and the historical background before the emergence of the phenomenon of domotics was conducted, followed by a critical discussion of existing definitions of the term "Smart Buildings" and other similar terms. The extent of each definition has been analyzed, inaccuracies have been discarded and commonalities have been compared. Throughout the discussion, definitions that bring the term "Smart Buildings" near to disciplines such as computer science, robotics and also telecommunications have been found. However, there are also many other definitions that emphasize in a more abstract way the role of these new buildings in the society and the future of mankind.

Bioaccessibility of heavy metals and risk assessment in urban gardens of Madrid

Human health problems and solutions. Urban gardening has spread worldwide in recent years as it enhances food security and selfsupply and promotes community integration. However urban soils are significantly enriched in trace elements relative to background levels. Exposure to the soil in urban gardens may therefore result in adverse health effects depending on the degree of contact during gardening, infant recreational activities and ingestion of vegetables grown in them. In order to evaluate this potential risk, 36 composite samples were collected from the top 20 cm of the soil of 6 urban gardens in Madrid. The aqua regia (pseudototal) and glycine-extractable (bioaccessible) concentrations of Co, Cr, Cu, Ni, Pb and Zn were determined by atomic absorption spectrophotometry. Additionally, pH, texture, Fe, Ca, and Mn concentrations, and organic matter and calcium carbonate contents were determined in all urban gardens and their influence on trace element bioaccessibility was analyzed.

Ground-penetrating radar surveys and ice volume estimates of Wedel Jarlsberg Land glaciers, Svalbard

We present volume calculations, with detailed error estimates, for eight glaciers on Wedel Jarlsberg Land, southern Spitsbergen, Svalbard, and compare them to those obtained from area-volume scaling relationships. The volume estimates are based upon a dense net of GPR-retrieved ice thickness data collected over several field campaigns spanning the period 2004-2011.

Microstructural and mechanical characteristics of W-2Ti and W-1TiC processed by Hot Isostatic Pressing

It has been demonstrated that mechanical alloying and subsequent consolidation by hot isostatic pressing (HIP) is a successful route to produce dispersion strengthened W alloys with properties satisfying the design requirements of particular plasma facing components in the fusion reactor. However, the presence of the alloying element as a phase filling large interstices between W particles appears to reduce the mechanical properties of these alloys. In order to limit this phase separation induced by the HIP treatment and the detrimental effects on the mechanical properties, the enhancement of the mechanical alloying process, and the effect of a postconsolidation heat treatment in an reducing atmosphere, have been investigated.

Fabrication and properties of the SITE-SiCf/SiC composite

Continuous SiC-fiber-reinforced SiC composite (SiCf/SiC) is an attractive candidate structural material for advanced concepts of future fusion power plants, mainly due to the favourable intrinsic properties of the SiC ceramics, i.e. high temperature- and chemical stability, low neutron activation and afterheat levels as well as due to the fact that it is the only nonmagnetic material proposed. Fabrication of such composites is a very challenging task due to limitations and requirements set for fusion-relevant structural materials.

Análisis de la estructura del juego y parámetros morfológicos y fisiológicos en bádminton

En este trabajo se ha realizado un análisis de la estructura del juego y de los parámetros morfológicos y fisiológicos en jugadores de bádminton. Para ello se han realizado 4 estudios aplicados. Objetivo: Los objetivos del trabajo han sido: (1) comprobar si existen diferencias entre el lado dominante y no dominante de las medidas antropométricas en jugadores de bádminton de máximo nivel nacional, así como verificar si el lado del cuerpo donde se realiza la medición puede influir en el cálculo de la composición corporal y del somatotipo. (2) Comparar la estuctura temporal y notacional en partidos de individual masculino entre los Juegos Olímpicos de Pekín y de Londres para observar como ha evolucionado el bádminton de 2008 a 2012. (3) Medir la ocurrencia de daño muscular después de un partido simulado de bádminton y su influencia en parámetros físicos y hematológicos. (4) Investigar la efectividad de una bebida energética que contiene cafeína para mejorar el rendimiento físico y el rendimiento en un partido en jugadores de élite de bádminton. Metodología: Para caracterizar el bádminton participaron en esta tesis un total de 78 jugadores de bádminton de élite (63 hombres y 15 mujeres), distribuidos en tres estudios y se analizaron 40 sets de bádminton de individual masculino usando los videos oficiales de los Juegos Olímpicos de Pekín 2008 y Londres 2012. En el primer estudio se tomaron medidas de pliegues cutáneos, diámetros, longitudes y perímetros del lado dominante y no dominante de los jugadores. Se calculó la composición corporal y el somatotipo. En el segundo estudio se analizaron los factores temporales y los factores notacionales de los partidos. En el tercer estudio se midieron la fuerza máxima isométrica, la velocidad en test específicos de bádminton y se tomaron muestras de sangre antes y después de jugar un partido de bádminton de 45 minutos. En el cuarto estudio se realizó un experimento a doble ciego, aleatorizado y controlado con placebo, los jugadores ingirieron 3 mg de cafeína por kilógramo de masa corporal en forma de bebida energética, o la misma bebida sin cafeína (placebo). En este estudio se registraron diferente tests específicos de bádminton (tests de salto, fuerza máxima y test de agilidad) y se jugó un partido simulado de 45 minutos. Resultados y discusión: (1) El porcentaje óseo fue mayor calculado a partir de las mediciones del lado dominante (dominante = 16.37 ± 1.14 %, no dominante = 15.66 ± 1.12 %; P < 0.001), mientras que el porcentaje muscular fue mayor calculado a partir de las mediciones del lado no dominante (dominante = 49.39 ± 2.60 %, no dominante = 50.18 ± 2.69%; P < 0.001). (2) La duración del set (Pekín: 1124.6 ± 229.9 s vs Londres: 1260.3 ± 267.1 s.; P < 0.05), el tiempo real de juego (Pekín: 306.9 ± 45.7 s vs Londres: 354.7 ± 86.5 s; P < 0.05), tiempo de rally, golpeos por rally, tiempo de descanso en el punto 11, tiempo de descanso entre sets y golpeos por rally fueron significativamente mayores en Londres que en Pekín. (3) El partido simulado de bádminton no afectó a la fuerza isométrica máxima (Pre: 1263.6 ± 245.5, Post: 1290.8 ± 240.4 N) o a la velocidad específica de bádminton (Pre: 21.0 ± 1.7, Post: 20.9 ± 1.8 s), sin embargo las concentraciones de mioglobina y de creatina quinasa en sangre aumentaron de 26.5 ± 11.6 a 197.3 ± 70.2 μg • L-1 y de 258.6 ± 192.2 a 466.0 ± 296.5 U • L-1, respectivamente después del partido de bádminton. (4) En comparación con la bebida placebo, la ingesta de la bebida energética con cafeína incrementó la altura del SJ (34.5±4.7 vs. 36.4±4.3 cm; P < 0.05) y del CMJ (37.7 ± 4.5 vs. 39.5 ± 5.1 cm; P < 0.05) y aumentó el número de aceleraciones totales durante el partido (7395 ± 1594 vs. 7707 ± 2033 aceleraciones; P < 0.05). Conclusiones: (1) Existen asimetrías corporales en los jugadores de bádminton de alto nivel, al encontrarse diferencias en los diámetros óseos y en los perímetros entre el lado dominante y no dominante. Al calcular la composición corporal con el lado dominante de los jugadores de bádminton se está sobreestimando el porcentaje óseo e infraestimando el porcentaje muscular. (2) El bádminton está evolucionando hacía rallies más largos con intervalos de descanso mayores, lo que resulta en partidos más largos. (3) El partido de bádminton generó daño muscular, sin embargo, el nivel de daño muscular alcanzado después de un partido de bádminton no produjo una disminución del rendimiento muscular. (4) El uso de una bebida energética con cafeína puede ser una ayuda nutricional eficaz para aumentar el rendimiento en el salto y patrones de actividad durante el juego en jugadores de élite de bádminton. ABSTRACT: This study analyzes the structure of the game and the morphological and physiological parameters in badminton players, investigated in four applied studies. Purpose: The purposes of the study were: (1) To check if there are differences between the dominant and non-dominant side in the anthropometric measures of badminton players at the highest national level and verify if the side of the body where the measurements are performed can influence the calculation of the body composition and the somatotype. (2) To compare the temporal and notational structure in men’s singles matches between the Olympic Games in Beijing and London to observe the evolution of badminton between 2008 and 2012. (3) To asses the occurrence of muscle damage after a simulated badminton match and its influence on physical and haematological parameters. (4) To determine the effectiveness of a commercially available energy drink that contains caffeine to improve match performance in elite badminton players. Methods: A total of 78 elite badminton players (63 men and 15 women) participated in this thesis to characterize the sport of badminton distributed in three studies and 40 sets of men’s singles badminton analyzed using the official videos of the Olympic Games of Beijing 2008 and London 2012. In the first study skinfolds, diameters, lengths and perimeters of the dominant and non-dominant side of the players were measured and body composition and somatotype were calculated. In the second study the temporal and notational factors were analyzed. In the third study maximal isometric force and speed in badminton specific tests were measured and blood samples were taken before and after a badminton match of 45 minutes. In the fourth study, a double-blind, randomized placebo-controlled experiment, players ingested 3 mg of caffeine per kilogram of body mass in the form of an energy drink or an identical drink with no caffeine content (placebo). In this study different badminton specific tests (jump tests, handgrip force test and an agility test) were recorded and a simulated badminton match of 45 minutes was played. Results and discussion: (1) The percentage of bone was higher when calculated from measurements of the dominant body side (dominant = 16.37 ± 1.14 %, nondominant = 15.66 ± 1.12 %; P < 0.001), while the muscle percentage was higher when calculated from measurements of the non-dominant side (dominant = 49.39 ± 2.60 %, non-dominant = 50.18 ± 2.69%; P < 0.001). (2) Set duration (Beijing: 1124.6 ± 229.9 s vs. London: 1260.3 ± 267.1 s.; P < 0.05), real time played (Beijing: 306.9 ± 45.7 s vs. London: 354.7 ± 86.5 s; P < 0.05), rally time, shots per rally, rest time at point 11, rest time between sets and shots per rally were significantly higher in London than in Beijing. (3) A simulated badminton match did not affect maximal isometric force (Pre: 1263.6 ± 245.5, Post: 1290.8 ± 240.4 N) or specific badminton speed (Pre: 21.0 ± 1.7, Post: 20.9 ± 1.8 s), however, concentrations of myoglobin and creatine kinase in blood increased from 26.5 ± 11.6 to 197.3 ± 70.2 μg • L-1 and from 258.6 ± 192.2 to 466.0 ± 296.5 U • L-1, respectively after the badminton match. (4) In comparison to the placebo drink, the caffeinated beverage increased height in the SJ (34.5±4.7 vs. 36.4±4.3 cm; P < 0.05) and in the CMJ (37.7 ± 4.5 vs. 39.5 ± 5.1 cm; P < 0.05) and increased the number of total accelerations during the match (7395 ± 1594 vs. 7707 ± 2033 accelerations; P < 0.05). Conclusions: (1) Body asymmetries were found in high level badminton players, due to the differences found in bone diameters and perimeters between the dominant and non-dominant body side. When calculating body composition with the dominant side of the badminton players we are overestimating bone percentage and underestimating muscle percentage. (2) Badminton is evolving towards longer rallies with greater rest intervals, resulting in longer matches. (3) The badminton match generated muscle damage, however, the level of muscle damage reached after a badminton match did not produce a decrease in muscle performance. (4) The ingestion of an energy drink containing caffeine might be an effective ergogenic nutritional supplement to increase jump performance and activity patterns during the game in elite badminton players.

Unified underpinning of human mobility in the real world and cyberspace

Acknowledgments This work is supported by National Science Foundation of China (Grant No. 61573064, 61074116 and 11547188), the Youth Scholars Program of Beijing Normal University (grant No. 2014NT38), and the Fundamental Research Funds for the Central Universities Beijing Nova Programme, China. XYY acknowledges the support from the National Natural Science Foundation of China (Grant No. 61304177) and the Fundamental Research Funds of BJTU (Grant No. 2015RC042).