CeO(2)-catalyzed ozonation of phenol

Three different cerium citrate-based precursors were used for synthesizing CeO(2) through thermal treatment. Three morphological types of CeO(2) were obtained. Characterization of these oxides was carried out by XRD patterns, SEM microscopy, N(2) adsorption isotherms, Raman spectroscopy, zeta potential, and UV/Vis luminescence. Ozonation of phenol catalyzed by CeO(2) was studied as a representative reaction of environmental interest. The differences on the catalytic activity showed by these three oxides could be correlated to amounts of Ce(3+) on CeO(2) surface and, consequently, to the demand for oxygen needed to burn each precursor.

En vältränad och hälsosam kropp - eller bara en täckmantel för vad det egentligen handlar om? : En innehållsanalys av träningstidningarna Body och Fitness

The aim with this Essay is to examine the two most read magazines in Sweden covering the areas of exercising, fitness, bodybuilding, diets and “wellness” –Fitness and Body. Fitness’s target group is predominantly woman, while Body is almost exclusively read by men. The analysis is first done quantitatively, by systematically categorising the contents of the magazines. Then a qualitative analysis is made. Using two different theories, Anja Hirdman’s gender concept along with her constructivistic media perspective and the theory of Symbolic Interactionism, i try to answer the following questions; Does the two magazines term of address and language differ from one and other? And if that is the case, in what way? With point of departure from contents and subject areas, how are the two magazines compounded? How can the underlying message in the different articles be interpreted?The analysis shows that both magazines followed their purpose of writing about exercising in general, diet, fitness and bodybuilding. However, the magazine Fitness writes more often then Body about matters not following the given purpose, and the language in Body is more informative and general in comparison with the language used in Fitness. Still, the messages sent out by the different articles are in majority of the respects similar. Both magazines are portraying body ideals who can be understand as extreme. In Body the message feels fairly straight, “Build bigger muscles and burn more fat”, whereas Fitness willingly use the concept of “wellness” as a cover for what the message really is, namely “get your self a rock hard body through dieting and hard training”!

Utbrändhet som arbetsskada och motståndsberättelse

Burnout as occupational injury and narrative of resistance During the last years of the 1990s and the first years of the 2000s, burnout was a common diagnosis for sick listing in Sweden. That burnout is directly related to working life was acknowledged by medical experts as well as in the public debate. The number of applications for occupational compensation due to social and organizational factors in work rose from a very modest degree to nearly a forth of the claims among occupational diseases. In this article 48 individual claims for compensation in cases of burnout as occupational disease are analyzed as narratives of resistance. In this respect they are seen as alternative accounts of risk in working life, but also as narratives about resistance. The concept, narratives of resistance, is used to understand the claimants’ argumentation for rights to compensation, as well as how the claimants draw upon public narratives of societal transformation to understand how they themselves have become ill from occupations that normally are not thought to be hazardous. One conclusion from the analysis is that the claimants regard their illness as the resistance of the body against changes in society and working life. 

Emissions Characterisation of residential pellet boilers during start-up and stop periods

In this study, gaseous emissions and particles are measured during start-up and stop periods for an over-fed boiler and an under-fed boiler. Both gaseous and particulate matter emissions are continuously measured in the laboratory. The measurement of gaseous emissions includes oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxide and (NO). The emissions rates are calculated from measured emissions concentrations and flue gas flow. The behaviours of the boilers during start-up and stop periods are analysed and the emissions are characterised in terms of CO, NO, TOC and particles (PM2.5 mass and number). The duration of the characterised periods vary between two boilers due to the difference in type of ignition and combustion control. The under-fed boiler B produces higher emissions during start-up periods than the over-fed boiler A. More hydrocarbon and particles are emitted by the under-fed boiler during stop periods. Accumulated mass of CO and TOC during start-up and stop periods contribute a major portion of the total mass emitted during whole operation. However, accumulated mass of NO and PM during start-up and stop periods are not significant as the duration of emission peak is relatively short.

Desenvolvimento e caracterização de compósitos poli(tereftalato de etileno) reciclado (PET reciclado) com flocos de vidro.

The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate new products, enlarging the cycle of materials and energy which are present. Among the polymeric residues, there is poly (ethylene terephthalate) (PET). PET is used in food packaging, preferably in the bottling of carbonated beverages. The reintegration of post-consumer PET in half can be considered a productive action mitigation of environmental impacts caused by these wastes and it is done through the preparation of several different products at the origin, i.e. food packaging, with recycling rates increasing to each year. This work focused on the development and characterization mechanical, thermal, thermo-mechanical, dynamic mechanical thermal and morphology of the pure recycled PET and recycled PET composites with glass flakes in the weight fraction of 5%, 10% and 20% processed in a single screw extruder, using the following analytical techniques: thermogravimetry (TG), differential scanning calorimetry (DSC), tensile, Izod impact, Rockwell hardness, Vicat softening temperature, melt flow rate, burn rate, dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). The results of thermal analysis and mechanical properties leading to a positive evaluation, because in the thermograms the addition of glass flakes showed increasing behavior in the initial temperatures of thermal decomposition and melting crystalline, Furthermore was observed growing behavior in the mechanical performance of polymer composites, whose morphological structure was observed by SEM, verifying a good distribution of glass flakes, showing difference orientation in the center and in the surface layer of test body of composites with 10 and 20% of glass flakes. The results of DMTA Tg values of the composites obtained from the peak of tan ä showed little reductions due to poor interfacial adhesion between PET and recycled glass flakes.

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

A prática de atividade física de crianças e adolescentes com e sem epilepsia

The epilepsy is one of the neurological disorders more common in the pediatric period, and which interferes significantly in the psycho and social life of children and teenagers. The objective of this study was analyzing the practice of sedentary practices, physicals, traditional infant fun and games of children and teenagers with and without epilepsy. The study was prospective, transversal descriptive, done with 60 children and teenagers with epilepsy (Epileptic Group - EG) patients from Pediatric Neurology Clinic of the Centre Integrated Health Lineu Araújo and 60 children and teenagers without epilepsy (Control Group - CG) students from municipal public school, both of the two groups paired with the same age (age group 7 to 14 years) of both the genders (female = 25/41,6% and male = 35/58,3%) of the Teresina city Piauí. It was done two pattern questionnaires, one applied to children and teenagers of the EG and CG to identify the sedentary activities, physical and traditional infant games and other to the parents/responsible of the EG about the clinical and demographic information. The results permitted the elaboration of two manuscripts: a) the first one titled The Practice of Sedentary and Physical Activities of Children and Teenagers with Epilepsy which showed significant difference in the sedentary activities of playing with car toy (p=0,021) to the EG and reading to the CG (p=0,001); in the physical activities the school physical education (p=0,001) and riding a bike (p=0,014) to the CG; b) the second one The Practice of Infant Games and Fun the children and teenagers with and without Epilepsy in this one the playing with marble presented significant difference (p=0,016) to the CG, despite the girls of the two groups don t do this activity. Observing the distribution of frequencies, it was verified that in the play catch-up and hide-and-seek and burn the EG plays more than the CG both in female and male gender. The girls of the EG play less skip, 60 while the boys of the two groups don t play. Elastic jump the girls of the two groups play in a same frequency and the boys don t participate of this fun. The seizures were found to occur during: soccer (23,3%); hide-and-seek (6,6%) and running (3,3%). In the sedentary activities, seizures were reported to occur: resting and watching TV (18,3%), sleeping (36,0%); sitting (13,3%) and lying down (11,7%). Our results showed that the epileptic group and the controls group engage in the same activities, although the epileptic group participates less than the controls. Although the EG had presented a bigger percentage of generalized attacks, they don t occur during the practice of formal physical activities. The research was developed by a multidisciplinary team, and this contributed a lot to the realization of this study

Períodos de dessecação de Urochloa ruziziensis e seu reflexo na produtividade da soja RR

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do resíduo de colheita de cana-de-açúcar sem queima sobre a eficiência dos herbicidas imazapic e imazapic + pendimethalin

Os resíduos deixados sobre o solo por ocasião da colheita mecanizada da cana-de-açúcar podem constituir-se em uma barreira física para a ação dos herbicidas no controle de plantas daninhas, quando aplicados em pré-emergência destas plantas sobre a palha da cana. em virtude disso, o presente trabalho teve por objetivos analisar e quantificar a interferência dessa camada de palha sobre o solo na ação dos herbicidas imazapic e imazapic + pendimethalin no controle de plantas daninhas em áreas onde a cana-de-açúcar foi colhida mecanicamente sem a queima da palhada previamente à colheita. Foram realizados dois ensaios simultâneos: um com a retirada da palha dois dias após a aplicação dos herbicidas e o outro com a manutenção desta, ambos conduzidos em casa de vegetação. O imazapic isolado foi aplicado nas dosagens de 0, 122,5 e 147 g i.a.ha-1 e em mistura com pendimethalin na dosagem de 75 + 1500 g i.a.ha-1, com simulação de chuvas nas intensidades de 30, 60 e 90 mm. Após análise dos resultados de biomassa seca, altura e número de folhas das plantas de Sorghum bicolor e Cyperus rotundus, além de nota visual e biomassa seca de Panicum maximum, Brachiaria plantaginea, Digitaria horizontalis, Amaranthus viridis, Ipomoea grandifolia e Brachiaria decumbens, constatou-se eficiência proporcional dos herbicidas à dosagem utilizada, independentemente da presença da palha, à exceção de Ipomoea grandifolia e Brachiaria decumbens, além de haver menor controle nos tratamentos submetidos à chuva de 90 mm. Esses resultados indicam boas perspectivas quanto à aplicação destes herbicidas em áreas de colheita mecanizada de cana-de-açúcar sem queima, para controle de plantas daninhas em condições de pré-emergência.

Banco de sementes de plantas daninhas e sua correlação com a flora estabelecida no agroecossistema cana-crua

O conhecimento da composição específica do banco de sementes de plantas daninhas e a sua correlação com a flora estabelecida são importantes para nortear o manejo a ser adotado e a escolha dos herbicidas. A colheita mecanizada de cana-de-açúcar acarretou mudanças significativas na composição da flora infestante, quando proporcionou a manutenção de uma camada de palha, reduziu a movimentação do solo e dispensou a prática da queimada. Foram realizados levantamentos do banco de sementes e da flora de plantas daninhas que se estabeleceu em 28 talhões colhidos mecanicamente, sem queima prévia da palha. Com base nos dados de banco de sementes, efetuaram-se estudos fitossociológicos e de correlação entre a composição do banco de sementes e a flora emergida. As principais espécies presentes no banco de sementes foram as pertencentes à classe das dicotiledôneas anuais, com destaque para Amaranthus spp. e diversas espécies de Euphorbiaceae e Convolvulaceae. As sementes de gramíneas tradicionais da cultura tiveram pouca participação. O banco de sementes apresentou correlação não-significativa com a flora emergente, independentemente da época de colheita do talhão, da metodologia de quantificação do banco de sementes e das espécies de plantas daninhas.

Estudo do perfil térmico de fornos do tipo "caipira" utilizados pelo setor de cerâmica vermelha em parelhas na região Seridó-RN

The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace

Fitossociologia de comunidades de plantas daninhas em agroecossistema cana-crua

Objetivou-se neste trabalho estudar a fitossociologia de comunidades de plantas daninhas de canaviais colhidos no sistema mecanizado, sem queima prévia da palha, e a similaridade entre talhões quanto à composição de espécies. Os levantamentos foram realizados em 28 talhões comerciais na região de Ribeirão Preto-SP. em cada talhão foram demarcadas áreas de coleta e avaliação, na proporção de duas por hectare, mantidas sem controle, e que serviram de local para as amostragens de plantas daninhas. As amostragens foram feitas com quadrados vazados (0,5 x 0,5 m), lançados aleatoriamente duas vezes em cada uma das áreas. Essas amostragens foram realizadas determinando-se a densidade e a biomassa específica aos 120 dias após o corte da cana. Cyperus rotundus foi a principal espécie, destacando-se quanto aos valores de importância relativa (IR). As plantas dicotiledôneas anuais de propagação por sementes também se destacaram, dentre as quais diversas espécies das famílias Euphorbiaceae e Convolvulaceae. em contrapartida, as gramíneas tradicionais de áreas de cana colhida queimada tiveram pouco destaque. O índice de Shannon (H) de diversidade de espécies das comunidades variou de 0 a 1,61, e o índice de similaridade entre os talhões (S) foi muito variável. A maioria das espécies ou grupo de espécies apresentou padrão agregado (V/m > 1,00), com valores relativamente altos de índice de agregação (V/m). Entretanto, na maioria dos casos, Cyperus rotundus e as Convolvulaceas apresentaram os maiores índices.

Infestation of froghopper nymphs changes the amounts of total phenolics in sugarcane

The increased rate of sugarcane harvest without previous burn has provided a very favorable environment to the froghopper Mahanarva fimbriolota (Stal, 1854), with high Moisture and low temperature variation. Few works have Studied the response of sugarcane to this pest, so little is known about resistant cultivars. Plant phenolics are widely studied compounds because of their known antifierbivore effect. This research aims to determine if the attack of M.fimbriolata nymphs stimulates the acccumulation of total phenolics in sugarcane. The experiment was carried Out in greenhouse and arranged in completely randomized design, in a 3 x 2 x 4 factorial with three replications. Second instar nymphs of M. fimbriolota were infested at the following rates: control, 2-4 and 4-8 nymphs per pot (first-second infestations, respectively). Pots were covered with nylon net and monitored daily to isolate the effect of leaf Sucking adults. Leaf and root samples were collected and kept frozen in liquid nitrogen until analyses. Infested plants showed higher levels of phenolics in both root and leaf tissues. In roots, the cultivar SP80-1816 accumulated more phenolic compounds in response to the infestation of M. fimbriolata. on the other hand, higher levels were found in leaves and roots of control plants of SP86-42, which might be an indication of a non-preference mechanism. The increase of total phenolics in sugarcane infested with root-sucking froghopper nymphs does not seem to be useful to detect the resistance to this pest.

Genetic associations of sexual precocity with growth traits and visual scores of conformation, finishing, and muscling in Nelore cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)