Strategic tillage in no-till farming systems in Australia’s northern grains-growing regions: I. Drivers and implementation

Development of no-tillage (NT) farming has revolutionized agricultural systems by allowing growers to manage greater areas of land with reduced energy, labour and machinery inputs to control erosion, improve soil health and reduce greenhouse gas emission. However, NT farming systems have resulted in a build-up of herbicide-resistant weeds, an increased incidence of soil- and stubble-borne diseases and enrichment of nutrients and carbon near the soil surface. Consequently, there is an increased interest in the use of an occasional tillage (termed strategic tillage, ST) to address such emerging constraints in otherwise-NT farming systems. Decisions around ST uses will depend upon the specific issues present on the individual field or farm, and profitability and effectiveness of available options for management. This paper explores some of the issues with the implementation of ST in NT farming systems. The impact of contrasting soil properties, the timing of the tillage and the prevailing climate exert a strong influence on the success of ST. Decisions around timing of tillage are very complex and depend on the interactions between soil water content and the purpose for which the ST is intended. The soil needs to be at the right water content before executing any tillage, while the objective of the ST will influence the frequency and type of tillage implement used. The use of ST in long-term NT systems will depend on factors associated with system costs and profitability, soil health and environmental impacts. For many farmers maintaining farm profitability is a priority, so economic considerations are likely to be a primary factor dictating adoption. However, impacts on soil health and environment, especially the risk of erosion and the loss of soil carbon, will also influence a grower’s choice to adopt ST, as will the impact on soil moisture reserves in rainfed cropping systems.

Gap acceptance behavior of mobile phone distracted drivers at roundabouts

While mobile phones have become ubiquitous in modern society, the use of mobile phones while driving is increasing at an alarming rate despite the associated crash risks. A significant safety concern is that driving while distracted by a mobile phone is more prevalent among young drivers, a less experienced driving cohort with elevated crash risk. The objective of this study was to examine the gap acceptance behavior of distracted young drivers at roundabouts. The CARRS-Q Advanced Driving Simulator was used to test participants on a simulated gap acceptance scenario at roundabouts. Conflicting traffic from the right approach of a four-legged roundabout were programmed to have a series of vehicles having the gaps between them proportionately increased from two to six seconds. Thirty-two licensed young drivers drove the simulator under three phone conditions: baseline (no phone conversation), hands-free and handheld phone conversations. Results show that distracted drivers started responding to the gap acceptance scenario at a distance closer to the roundabout and approached the roundabout at slower speeds. They also decelerated at faster rates to reduce their speeds prior to gap acceptance compared to non-distracted drivers. Although accepted gap sizes were not significantly different across phone conditions, differences in the safety margins at various gap sizes—measured by Post Encroachment Time (PET) between the driven vehicle and the conflicting vehicle—were statistically significant across phone conditions. PETs for distracted drivers were smaller across different gap sizes, suggesting a lower safety margin taken by distracted drivers compared to non-distracted drivers. The results aid in understanding how cognitive distraction resulting from mobile phone conversations while driving influences driving behavior during gap acceptance at roundabouts.

Key drivers of the economic burden of community-associated Methicillin-resistant Staphylococcus aureus in Australia

Estimates of the economic cost of community-associated Methicillin-resistant Staphylococcus aureus(CA-MRSA) in the United States (US) are substantial, ranging from $1.4-13.8 billion. In Australia, it has been shown that rates of CA-MRSA are increasing, and individual studies have looked at the morbidity and mortality associated with CA-MRSA, however, it is not clear what is driving the economic burden of CA-MRSA at a national level. This study presents preliminary findings about the key drivers of the economic cost of CA-MRSA infections in Australia

Does family background impact driving attitudes and risky behaviours? - An investigation on Chinese young drivers

This thesis took a novel approach to examining factors associated with risky attitudes and risky road use in China by investigating the economic and political background status of a sample of young Chinese drivers. Using data from an online survey significant relationships are found between some family background factors and road safety variables. Correlation analysis, ANOVA, hierarchical regression analysis and structural equation modelling are applied in this study, with culture, personality and demographic variables as additional factors for a better understanding of the key findings. The findings are discussed in light of China's political management system and potential education opportunities for young drivers.

Analyzing changes in macro-level drivers of country-specific emissions : The role of consumption, technology and trade

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.

Juggling priorities: Balancing economic and social drivers to address the LLN needs of students in the VET sector

Economic success, and a commitment to the social benefits of inclusive training opportunities are important goals for public vocational education and training (VET). Currently, in Australia, VET policy is a shared responsibility between the Commonwealth and the States and Territories. Priorities for investment are juggled between: a) improving efficiency and responsiveness; and b) providing societal prosperity. Amid recent VET educational reforms and policy directives the authors of this paper undertook a pilot study examining language, literacy and numeracy support and inclusive teaching and learning practices in a Diploma of Nursing course. The data highlighted implications arising from new market driven education reforms. This article reports on identified factors that influenced inclusive learning opportunities, noticeably associated with two recent policy developments: the release of the FSK Foundation Skills Training Package (IBSA 2014); and the Queensland's Higher Skills Program Policy 2014-15.

Theatre, networked performance, and notions of ‘democratised’ spectatorship

The potential to cultivate new relationships with spectators has long been cited as a primary motivator for those using digital technologies to construct networked or telematics performances or para-performance encounters in which performers and spectators come together in virtual – or at least virtually augmented – spaces and places. Today, with Web 2.0 technologies such as social media platforms becoming increasingly ubiquitous, and increasingly easy to use, more and more theatre makers are developing digitally mediated relationships with spectators. Sometimes for the purpose of an aesthetic encounter, sometimes for critical encounter, or sometimes as part of an audience politicisation, development or engagement agenda. Sometimes because this is genuinely an interest, and sometimes because spectators or funding bodies expect at least some engagement via Facebook, Twitter or Instagram. In this paper, I examine peculiarities and paradoxes emerging in some of these efforts to engage spectators via networked performance or para-performance encounters. I use examples ranging from theatre, to performance art, to political activism – from ‘cyberformaces’ on Helen Varley Jamieson’s Upstage Avatar Performance Platform, to Wafaa Bilal’s Domestic Tension installation where spectators around the world could use a webcam in a chat room to target him with paintballs while he was in residence in a living room set up in a gallery for a week, as a comment on use of drone technology in war, to Liz Crow’s Bedding Out where she invited people to physically and virtually join her in her bedroom to discuss the impact of an anti-disabled austerity politics emerging in her country, to Dislife’s use of holograms of disabled people popping up in disabled parking spaces when able bodied drivers attempted to pull into them, amongst others. I note the frequency with which these performance practices deploy discourses of democratisation, participation, power and agency to argue that these technologies assist in positioning spectators as co-creators actively engaged in the evolution of a performance (and, in politicised pieces that point to racism, sexism, or ableism, pushing spectators to reflect on their agency in that dramatic or daily-cum-dramatic performance of prejudice). I investigate how a range of issues – from the scenographic challenges in deploying networked technologies for both participant and bystander audiences others have already noted, to the siloisation of aesthetic, critical and audience activation activities on networked technologies, to conventionalised dramaturgies of response informed by power, politics and impression management that play out in online as much as offline performances, to the high personal, social and professional stakes involved in participating in a form where spectators responses are almost always documented, recorded and re-represented to secondary and tertiary sets of spectators via the circulation into new networks social media platforms so readily facilitate – complicate discourses of democratic co-creativity associated with networked performance and para-performance activities.

Factors associated with self-reported driver sleepiness and incidents in city bus drivers

Driver fatigue has received increased attention during recent years and is now considered to be a major contributor to approximately 15–30% of all crashes. However, little is known about fatigue in city bus drivers. It is hypothesized that city bus drivers suffer from sleepiness, which is due to a combination of working conditions, lack of health and reduced sleep quantity and quality. The overall aim with the current study is to investigate if severe driver sleepiness, as indicated by subjective reports of having to fight sleep while driving, is a problem for city based bus drivers in Sweden and if so, to identify the determinants related to working conditions, health and sleep which contribute towards this. The results indicate that driver sleepiness is a problem for city bus drivers, with 19% having to fight to stay awake while driving the bus 2–3 times each week or more and nearly half experiencing this at least 2–4 times per month. In conclusion, severe sleepiness, as indicated by having to fight sleep during driving, was common among the city bus drivers. Severe sleepiness correlated with fatigue related safety risks, such as near crashes.

Older male and female drivers in car-dependent settings: How much do they use other modes, and do they compensate for reduced driving to maintain mobility?

Among the societal and health challenges of population ageing is the continued transport mobility of older people who retain their driving licence, especially in highly car-dependent societies. While issues surrounding loss of a driving licence have been researched, less attention has been paid to variations in physical travel by mode among the growing proportion of older people who retain their driving licence. It is unclear how much they reduce their driving with age, the degree to which they replace driving with other modes of transport, and how this varies by age and gender. This paper reports research conducted in the state of Queensland, Australia, with a sample of 295 older drivers (>60 years). Time spent driving is considerably greater than time spent as a passenger or walking across age groups and genders. A decline in travel time as a driver with increasing age is not redressed by increases in travel as a passenger or pedestrian. The patterns differ by gender, most likely reflecting demographic and social factors. Given the expected considerable increase in the number of older women in particular, and their reported preference not to drive alone, there are implications for policies and programmes that are relevant to other car-dependent settings. There are also implications for the health of older drivers, since levels of walking are comparatively low.

An application of a physically based SOIL model to the Bowen ratio data

Yhteenveto: Haihdunnan mittaamisesta ja mallintamisesta peltoalueella

Drivers of ERP Systems´ Business Value

ERP system implementations have evolved so rapidly that now they represent a must-have within industries. ERP systems are viewed as the cost of doing business. Yet, the research that adopted the resource-based view on the business value of ERP systems concludes that companies may gain competitive advantage when they successfully manage their ERP projects, when they carefully reengineer the organization and when they use the system in line with the organizational strategies. This thesis contributes to the literature on ERP business value by examining key drivers of ERP business value in organizations. The first research paper investigates how ERP systems with different degrees of system functionality are correlated with the development of the business performance after the completion of the ERP projects. The companies with a better perceived system functionality obtained efficiency benefits in the first two years of post-implementation. However, in the third year there is no significant difference in efficiency benefits between successfully and less successfully managed ERP projects. The second research paper examines what business process changes occur in companies implementing ERP for different motivations and how these changes impact the business performance. The findings show that companies reported process changes mainly in terms of workflow changes. In addition, the companies having a business-led motivation focused more on observing average costs of each increase in the input unit. Companies having a technological-led motivation focused more on the benefits coming from the fit of the system with the organizational processes. The third research paper considers the role of alignment between ERP and business strategies for the realization of business value from ERP use. These findings show that strategic alignment and business process changes are significantly correlated with the perceived benefits of ERP at three levels: internal efficiency, customers and financial. Overall, by combining quantitative and qualitative research methods, this thesis puts forward a model that illustrates how successfully managed ERP projects, aligned with the business strategy, have automate and informate effects on processes that ultimately improve the customer service and reduce the companies’ costs.

Time and Location as Customer Perceived Value Drivers

Since the emergence of service marketing, the focus of service research has evolved. Currently the focus of research is shifting towards value co-created by the customer. Consequently, value creation is increasingly less fixed to a specific time or location controlled by the service provider. However, present service management models, although acknowledging customer participation and accessibility, have not considered the role of the empowered customer who may perform the service at various locations and time frames. The present study expands this scope and provides a framework for exploring customer perceived value from a temporal and spatial perspective. The framework is used to understand and analyse customer perceived value and to explore customer value profiles. It is proposed that customer perceived value can be conceptualised as a function of technical, functional, temporal and spatial value dimensions. These dimensions are suggested to have value-increasing and value-decreasing facets. This conceptualisation is empirically explored in an online banking context and it is shown that time and location are more important value dimensions relative to the technical and functional dimensions. The findings demonstrate that time and location are important not only in terms of having the possibility to choose when and where the service is performed. Customers also value an efficient and optimised use of time and a private and customised service location. The study demonstrates that time and location are not external elements that form the service context, but service value dimensions, in addition to the technical and functional dimensions. This thesis contributes to existing service management research through its framework for understanding temporal and spatial dimensions of perceived value. Practical implications of the study are that time and location need to be considered as service design elements in order to differentiate the service from other services and create additional value for customers. Also, because of increased customer control and the importance of time and location, it is increasingly relevant for service providers to provide a facilitating arena for customers to create value, rather than trying to control the value creation process. Kristina Heinonen is associated with CERS, the Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration

Relationship Drivers in Provider - Consumer Relationships. Empirical Studies of Customer Loyalty Programs (första upplagan slutsåld / first edition sold out, 'print on demand' 60 €)

The study addressed a phenomenon that has become common marketing practice, customer loyalty programs. Although a common type of consumer relationship, there is limited knowledge of its nature. The purpose of the study was to create structured understanding of the nature of customer relationships from both the provider’s and the consumer’s viewpoints by studying relationship drivers and proposing the concept of relational motivation as a provider of a common framework for the analysis of these views. The theoretical exploration focused on reasons for engaging in customer relationships for both the consumer and the provider. The themes of buying behaviour, industrial and network marketing and relationship marketing, as well as the concepts of a customer relationship, customer loyalty, relationship conditions, relational benefits, bonds and commitment were explored and combined in a new way. Concepts from the study of business-to-business relationships were brought over and their power in explaining the nature of consumer relationships examined. The study provided a comprehensive picture of loyalty programs, which is an important contribution to the academic as well as the managerial discussions. The consumer study provided deep insights into the nature of customer relationships. The study provides a new frame of reference to support the existing concepts of loyalty and commitment with the introduction of the relationship driver and relational motivation concepts. The result is a novel view of the nature of customer relationships that creates new understanding of the forces leading to loyal behaviour and commitment. The study concludes with managerial implications.

The Hybrid Consumer: Exploring the Drivers of a New Consumer Behaviour Type

A dramatically different consumption pattern seems to be emerging among a vast group of consumers. This may mean that conventional consumer stereotypes and segmentation theory are becoming outdated. The so called hybrid consumers seem to increasingly opt for both premium and budget alternatives in various product and service categories while mid-priced alternatives are losing share in their consumption basket. Although this type of polarisation, or dispersion, is already recognized as an important change, hybrid behaviour is still largely under-researched. The present study aims to analyze the possible drivers of hybrid consumption and by identifying typical categories and situations of trading up versus trading down derive tentative characteristics of hybrid consumption for further research on the topic. A tentative pattern of hybrid consumption was identified, which relates trading up to high-involvement, discretional spending and trading down to low-involvement necessities. However, it was also found that hybrid consumption transcends product category boundaries and may thus be less straightforward than previously perhaps assumed. In addition, a purchase pattern continuum was developed, accounting for various degrees of hybrid consumption.

DTC Technique for Induction Machine based Integrated Starter-Generator of an Automobile

This paper mainly concentrates on the application of the direct torque control (DTC) technique for the induction machine based integrated startergenerator (ISG) for automobile applications. It also discusses in brief about the higher DC bus voltage requirements in the automobiles i.e. present 14V system vs. 42V system to meet the power requirements, modes of operation of ISG, electric machine and the drive selection for the ISG,description of DTC technique, simulation and experimental results, and implementation.