Prevalência de alterações locais e sistêmicas em indivíduos com disfunção temporomandibular

Temporomandibular disorder describes a variety of conditions including joint and muscle in the stomatognathic system, characterized by pain, TMJ sounds, functions irregular jaw and represent the leading cause of nondental pain in the orofacial region. The objective of this research was to evaluate the prevalence of ophthalmological, otological and cognitive-behavioral changes, parafunctional habits in individuals with temporomandibular disorders (TMD). A total of 117 medical records of female and male individuals, aged 18 to 60 years, from the Occlusion, Temporomandibular Dysfunction and Orofacial Pain of the Ribeirão Preto School of Dentistry – USP, between 2010 and 2011. The anamnesis index proposed by Helkimo was used to classify the individuals according to TMD severity degree and to divide them into two groups: AiI (mild to moderate) with 69 individuals and AiII (severe) with 48 individuals. The groups were then subdivided with respect to gender (72.64% female and 27.36% male) and age. There was predominance in the 18-40 year age group (60.68%) when compared to the 41-60 year age group (39.32%). Data were collected through an interview with questions about the presence of parafunctional habits, otological, ophthalmological and behavioral changes. Data were subjected to the statistical analysis using the Kruskal-Wallis test. The prevalence of each change was also evaluated. The results showed statistically significant for all groups according to gender, age and degree of severity. Individuals with temporomandibular disorders exhibited high prevalence of systemic and local dysfunctions.

Estimation of lower flammability limits of C-H compounds in air at atmospheric pressure, evaluation of temperature dependence and diluent effect

Estimation of the lower flammability limits of C-H compounds at 25 degrees C and 1 atm; at moderate temperatures and in presence of diluent was the objective of this study. A set of 120 degrees C H compounds was divided into a correlation set and a prediction set of 60 compounds each. The absolute average relative error for the total set was 7.89%; for the correlation set, it was 6.09%; and for the prediction set it was 9.68%. However, it was shown that by considering different sources of experimental data the values were reduced to 6.5% for the prediction set and to 6.29% for the total set. The method showed consistency with Le Chatelier's law for binary mixtures of C H compounds. When tested for a temperature range from 5 degrees C to 100 degrees C , the absolute average relative errors were 2.41% for methane; 4.78% for propane; 0.29% for iso-butane and 3.86% for propylene. When nitrogen was added, the absolute average relative errors were 2.48% for methane; 5.13% for propane; 0.11% for iso-butane and 0.15% for propylene. When carbon dioxide was added, the absolute relative errors were 1.80% for methane; 5.38% for propane; 0.86% for iso-butane and 1.06% for propylene. (C) 2014 Elsevier B.V. All rights reserved.

Monte Carlo simulation of water-tetrahydrofuran mixtures

Monte Carlo simulations of water-tetrahydrofuran (THF) mixtures were performed in the isothermal-isobaric ensemble (NPT) at T = 298 K and p = 1 atm. The interaction energy was calculated using the TIP4P model for water and a five-site united atom representation for the THF molecule. The potential energy surfaces for water-THF interactions were obtained by using combining rules and the original potential functions used for pure liquids. Theoretical values obtained for the average interaction energy as a function of concentration are in good agreement with available experimental data. Results from the partitioning of the total interaction energy into water-water, water-THF and THF-THF contributions are presented. These results are useful to distinguish between the quantitative contributions of these molecular interactions to the energetic behavior of the water-THF mixing process. The radial distribution functions for HW-OTHF and OW-OTHF site-site interactions show the salient features of hydrogen-bonded liquids. Comparison of the average number of water-water complexes interacting through hydrogen bonding in water-THF and water-methanol mixtures shows an enhancement of the water-water coordination number in a THF rich environment. © 1995.

Análise estrutural de aerogéis via espalhamento de luz a baixo ângulo

The sol-gel process is a method for obtaining vitreous or vitro-ceramic materials which, are prepared a sol and by drying the liquid phase. This technique has been used extensively for the preparation of glassy gels, films, fibers and particles from the hydrolysis and polycondensation reactions of metal alkoxides. The usual methods for drying are: evaporation drying (xerogels), freeze drying (criogéis) and via supercritical CO2 extraction (aerogels). In the present work, we studied the preparation of silica gels by the sol-gel process from the hydrolysis of alkoxides tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). The hydrolysis was promoted from GPTS and TEOS in proportion (4: 1) under acidic conditions. The hydrolysis reaction was promoted inside a Becker at room temperature. After hydrolyses the prepared sol had pH 2, and kept under mechanical agitation for a period of 1 hour. In order to accelerate the polycondensation reaction, the pH was corrected to a value near 5 by slowly adding NH4OH. Then the sols were leaked in sealed polycarbonate containers and maintained for 20 days at 40°C for gelation. Silica aerogels were prepared via supercritical CO2 extraction of the wet gel at temperature and pressure higher than 31°C and 74 atm, in an autoclave specially developed for the process. The structural characteristics were studied in the dry gel (aerogel). Aerogels were then characterized by nitrogen adsorption and small angle light scattering. The nitrogen adsorption data were analyzed for the determination of the BET specific surface (SBET), the total pore volume Vp, the pore mean size (lP=4Vp/SBET), the particle mean size (lS) and the pore size distribution (PSD). And the data from small angle light scattering were analyzed to determine the correlation function (γ'), the area per unit volume (S/V), average pore size (l ) and the average particle size...

Acupuntura em disfunção temporomandibular: relato de caso clínico

A técnica milenar da Acupuntura vem sendo empregada na Odontologia e obtendo bons resultados em diversas situações. Analgesia, relaxamento muscular e inflamação vêm sendo controlados, demonstrando assim conexão entre Acupuntura e redução de certas sintomatologias. As reações locais e à distância necessitam de correto posicionamento das agulhas assim como integridade do sistema nervoso, e são decorrentes da liberação de neurotransmissores (noradrenalina, acetilcolina, serotoninas e dopamina). Dentro da Odontologia, podemos nos utilizar dos seus efeitos no pré e pós operatório, em xerostomia, cefaléias, trismos, disfunção de ATM por estresse, parestesias, paresias, ansiedade, entre outras condições. Nos casos de disfunção de Articulação Temporomandibular por hiperatividade muscular, podemos utilizar a Acupuntura ao invés de relaxante muscular e antiinflamatório. Nesse trabalho, apresentaremos um caso clínico (paciente MCH, 23 anos, gênero feminino), a qual apresentava crises de dor de cabeça (região temporal), fazendo uso constante de medicação analgésica e antiinflamatória, o diagnóstico estabelecido foi Dor Muscular Local associado à hiperatividade muscular. Através do uso da Acupuntura, após aplicações semanais por 3 meses, houve remissão da dor por completo.

Reabilitação total bimaxilar e o restabelecimento da tríade: função, fonética e estética

O tratamento de indivíduos totalmente desdentados, desde os primórdios dos conceitos e fundamentos da reabilita-ção oral, tem sido um grande desafio para os profissionais da odontologia, especialmente em relação à retenção, suporte e estabilidade das próteses totais. Esses pré-requisitos protéticos estão geralmente deficientes em pacientes que apresentam um longo período de desdentamento, com grande atrofia e reabsor-ção dos rebordos alveolares, especialmente no arco mandibular. Com o advento da implantodontia e com a evolução sequencial dos estudos envolvendo o processo de osseointegração essa filosofia se tornou otimizada pelas próteses totais fixas implantossuportadas, denominadas próteses protocolo, repre-sentando uma modalidade clinicamente previsível no âmbito da dontologia moderna. Com base nessa premissa, o objetivo do presente trabalho é elucidar a sequência clínica de uma reabilitação total bimaxilar, conjugando-se uma prótese total convencional superior e uma prótese protocolo inferior.

Abordagem terapêutica nas desordens temporo-mandibulares: técnicas de fisioterapia associadas ao tratamento odontológico

Temporomandibular disorders (TMD) are related to discomfort in the temporomandibular joint (TMJ). These diseases are multifactorial and treatment usually requires a combination of different approaches because each patient presents with different and usually complex needs. It is necessary to know how each expert should plan for a successful treatment.

Vacuum infiltration of copper aluminate by liquid aluminium

This paper studies attained microstructures and reactive mechanisms involved in vacuum infiltration of copper aluminate preforms with liquid aluminium. At high temperatures, under vacuum, the inherent alumina film enveloping the metal is overcome, and aluminium is expected to reduce copper aluminate, rendering alumina and copper. Under this approach, copper aluminate toils as a controlled infiltration path for aluminium, resulting in reactive wetting and infiltration of the preforms. Ceramic preforms containing a mixture of Al2O3 and CuAl2O4 were infiltrated with aluminium under distinct vacuum levels and temperatures, and the resulting reaction and infiltration behaviour is discussed. Copper aluminates stability ranges depend on vacuum level and oxygen partial pressure, which determine both CuAl2O4 and CuAlO2 ability for liquid aluminium infiltration. At 1100 °C and 0.76 atm vacuum level CuAl2O4 is stable, indicating pO2 above 0.11 atm. Reactive infiltration is achieved via reaction between aluminium and CuAl2O4; however, fast formation of an alumina film blocking liquid aluminium wicking results in incipient infiltration. At 1000 °C and 3.8 × 10−7 atm vacuum level, CuAlO2 decomposes to Cu and Al2O3 indicating a pO2 below 6.0 × 10−7 atm; infiltration of the ceramic is hindered by the non-wetting behaviour of the resulting metal alloy. At 1000 °C and 1.9 × 10−6 atm vacuum level CuAlO2 is stable, indicating pO2 above 6.0 × 10−7 atm. Extensive infiltration is achieved via redox reaction between aluminium and CuAlO2, rendering a microstructure characterised by uniform distribution of alumina particles amid an aluminium matrix. This work evidences that liquid aluminium infiltration upon copper aluminate-rich preforms is a feasible route to produce Al–matrix alumina-reinforced composites. The associated reduction reaction renders alumina, as fine particulate composite reinforcements, and copper, which dissolves in liquid aluminium contributing as a matrix strengthener.

As mamas de Angelina Jolie e as relações de corpo, cultura e comunicação no discurso da revista Veja

This article analyzes the representation made by Veja magazine about american actress Angelina Jolie about the news about her preventive double mastectomy wich she was submitted. Based on the reflections of Michel Foucault, Gilles Deleuze and Felix Guattari on discourse analysis this article does not cramp about the contributions of linguistics. These reflections contribute to the understanding of this fact within the media landscape to control and discipline the body.

Detecção de impressões digitais falsas no reconhecimento biométrico de pessoas

Pós-graduação em Ciência da Computação - IBILCE

Abordagem alternativa para síntese de melanina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Topology Verification for Isosurface Extraction

The broad goals of verifiable visualization rely on correct algorithmic implementations. We extend a framework for verification of isosurfacing implementations to check topological properties. Specifically, we use stratified Morse theory and digital topology to design algorithms which verify topological invariants. Our extended framework reveals unexpected behavior and coding mistakes in popular publicly available isosurface codes.

Interactive quadrangulation with reeb atlases and connectivity textures

Creating high-quality quad meshes from triangulated surfaces is a highly nontrivial task that necessitates consideration of various application specific metrics of quality. In our work, we follow the premise that automatic reconstruction techniques may not generate outputs meeting all the subjective quality expectations of the user. Instead, we put the user at the center of the process by providing a flexible, interactive approach to quadrangulation design. By combining scalar field topology and combinatorial connectivity techniques, we present a new framework, following a coarse to fine design philosophy, which allows for explicit control of the subjective quality criteria on the output quad mesh, at interactive rates. Our quadrangulation framework uses the new notion of Reeb atlas editing, to define with a small amount of interactions a coarse quadrangulation of the model, capturing the main features of the shape, with user prescribed extraordinary vertices and alignment. Fine grain tuning is easily achieved with the notion of connectivity texturing, which allows for additional extraordinary vertices specification and explicit feature alignment, to capture the high-frequency geometries. Experiments demonstrate the interactivity and flexibility of our approach, as well as its ability to generate quad meshes of arbitrary resolution with high-quality statistics, while meeting the user's own subjective requirements.

Advances in primary immunodeficiency diseases in Latin America: epidemiology, research, and perspectives

Primary immunodeficiencies (PIDs) are genetic disorders of the immune system comprising many different phenotypes. Although previously considered rare, recent advances in their clinical, epidemiological, and molecular definitions are revealing how much we still need to learn about them. For example, geographical and ethnic variations as well as the impact of certain practices influence their frequency and presentation, making it necessary to consider their study in terms of regions. The Latin American Society for Immunodeficiencies was established as an organization dedicated to provide scientific support for basic and clinical research and to develop tools and educational resources to promote awareness in the medical community. Initiatives such as these are positively influencing the way PIDs are tackled in these countries, as shown by recent reports and publications. This paper provides a historical compilation and a current view of the many issues faced by scientists studying these diseases in these countries, highlighting the diverse scientific contributions and offering a promising perspective for the further developments in this field in Latin America.

A scheme for synchronizing clocks connected by a packet communication network

Consider a communication system in which a transmitter equipment sends fixed-size packets of data at a uniform rate to a receiver equipment. Consider also that these equipments are connected by a packet-switched network, which introduces a random delay to each packet. Here we propose an adaptive clock recovery scheme able of synchronizing the frequencies and the phases of these devices, within specified limits of precision. This scheme for achieving frequency and phase synchronization is based on measurements of the packet arrival times at the receiver, which are used to control the dynamics of a digital phase-locked loop. The scheme performance is evaluated via numerical simulations performed by using realistic parameter values. (C) 2011 Elsevier By. All rights reserved.