De um subproduto industrial para um produto destinado à alimentação animal: produção de biomassa bacteriana

A grande diversidade das atividades industriais ocasiona durante o processo produtivo a geração de resíduos sólidos, líquidos e gasosos, que podem poluir e/ou contaminar o solo, a água e o ar. Embora existam regulamentos para o descarte desses resíduos, a inobservância às regras, a ineficiência dos tratamentos despoluentes e a inoperância de órgãos fiscalizadores permitem que, ainda hoje, sejam lançados ao ambiente grandes cargas de poluentes. Isso se aplica às indústrias de alimentos de origem animal. Felizmente, a visão dos empresários do setor vem mudando, na medida em que a imagem de uma empresa que conta com produtos e processos ambientalmente responsáveis representa parte das estratégias competitivas atuais. O objetivo deste trabalho foi demonstrar como um efluente industrial pode ser transformado em matéria prima para a obtenção de um produto com valor comercial, utilizando tecnologias reconhecidas pela indústria e a atividade microbiana. O efluente foi obtido em indústria de abate e processamento de tilápias, apresentado (valores médios) pH = 9,4, DQO = 1.127 mg/L, óleos e graxas = 1.166 mg/L, nitrogênio total = 813 mg/L, coliformes a 30–35o C = 1,0x105 NMP/mL, coliformes a 45o C = 0,41 NMP/mL, bolores e leveduras = 4,6x103 UFC/mL e, ocasionalmente, contendo Salmonella sp e Aeromonas sp. Os tratamentos físicos aplicados ao efluente incluíram gradeamento, filtração (50µm) e pasteurização (65o C/30 min). O cultivo de Rubrivivax gelatinosus foi realizado sob anaerobiose em reatores de vidro durante 7 dias, em temperatura ambiente (30±5o C) e 2.000±500 lux. A recuperação da biomassa foi feita por filtração tangencial (0,2 µm; 1,5 bar), centrifugação (3.400 g/30 min; 5o C) e liofilização (-40o C) e a pulverização foi realizada manualmente. A produção de massa celular atingiu 0,18 g/L, com produtividade de 0,0634 g/L.dia. O processo promoveu redução de 52% na DQO, 48% em óleos e graxas e 22% no nitrogênio total, gerando um resíduo com pH 7,9, livre de bactérias patogênicas e, portanto, apto ao descarte. O produto obtido apresentou cor vermelho escuro (L = 22,42; C = 14,22; h = 25,48), 4,55% de umidade, 57,39% de proteína, 11,08% de extrato etéreo, 4,05% de matéria mineral, 3,03 mg/g de oxicarotenóides, 20,27 NMP/g de coliformes a 30–35o C, <1,0 NMP/g de coliformes a 45o C, 1,2x103 UFC/g de bolores e leveduras e ausência de microrganismos patogênicos. Essas características apontam para um potencial pigmentante e nutricional positivo no produto, que pode encontrar aplicação na produção animal, com segurança microbiológica. Dessa forma, fecha-se um ciclo autosustentável que pode ser adotado na própria fonte geradora do resíduo industrial, permitindo a reversão de gastos com tratamento despoluente em receitas advindas da comercialização de um novo produto.

Storage media for avulsed teeth: a literature review

Dental avulsion is the most severe type of traumatic tooth injuries because it causes damageto several structures and results in the complete displacement of the tooth from its socketin the alveolar bone. The ideal situation is to replant an exarticulated tooth immediatelyafter avulsion because the extraoral time is a determinant factor for treatment successand for a good prognosis. However, it is not always possible. The success of replantationdepends on a number of factors that may contribute to accelerate or minimize theoccurrence of root resorption or ankylosis, among which is the type and characteristicsof the medium used for temporary storage during the time elapsed between avulsionand replantation. Maintaining the tooth in an adequate wet medium that can preserve,as longer as possible, the vitality of the periodontal ligament cells that remain on rootsurface is the key to success of replantation. Recent research has led to the developmentof storage media that produce conditions that closely resemble the original socketenvironment, with adequate osmolality (cell pressure), pH, nutritional metabolites andglucose, and thus create the best possible conditions for storage. Although these storagemedia can now be purchased in the form of retail products, the most common scenariois that such a product will not be readily available at the moment of the accident Thispaper reviews the literature on the different storage media that have been investigatedfor avulsed teeth based on full-length papers retrieved from PubMed/Medline, Lilacs, BBOand SciELO electronic databases using the key words storage medium , transportationmedium , avulsion , tooth avulsion , replantation , tooth replantation , milk and propolis .After application of inclusion and exclusion criteria, 39 papers were selected and criticallyreviewed with respect to the characteristics, efficacy and ease of access of the storagemedium. The review of the lite

Avaliação da composição química, proteólise e propriedades funcionais do queijo mussarela comercial com teor reduzido de gordura

Chemical composition, proteolysis and functional properties of commercial Mozzarella cheese with reduced fat content found in the market of Londrina – PR were evaluated. The cheeses were analyzed for chemical composition, meltability, free oil formation, and the indexes of extension and depth of proteolysis during 30, 45 and 60 days of storage at 5°C. The samples showed no significant difference in chemical composition. The fat content of all samples complied with current legislation regarding the minimum percentage (25%) of fat reduction. Among the three brands tested, the cheeses of brand C showed the highest depth index of proteolysis. In all chesses, the meltability has increased during storage period. The, the brand C had significantly higher (p <0.05) free oil content when compared to other brands tested.

Caracterização de hambúrguer elaborado com farinha de folhas de Moringa (Moringa oleífera Lam.)

The aim of this study was to determine the antioxidant activity of Moringa (Moringa oleifera Lam.) leaves flour in beef burger during storage for 120 days. Six hamburger formulations were processed: one control (without the use of additives), four with addition of Moringa leaves flour (0.10, 0.15, 0.20, and 0.25 g/100 g aggregate), and one with addition of synthetic antioxidant Propyl Gallate (0.01 g/100 g aggregate). The products were analyzed for their chemical composition with determinations of moisture, protein, dietary fiber, lipids, ash, carbohydrate, and caloric value after preparation. Microbiological and acceptance testing were performed at the beginning and after 120 days of storage. Determination of pH, instrumental color and lipid oxidation (TBARS) were performed at 1, 30, 60, 90 and 120 days of storage. All samples showed physical-chemical and microbiological tests in accordance with the Brazilian legislation. pH measurements were between 5.48 and 5.90; however, the intensity of red has changed according to the treatments and storage periods. The addition of Moringa leaves flour had no antioxidant effect on burgers, but its inclusion not only contributed to the improvement of nutritional quality, but also did not harm product acceptance.

Método de modificação da superfície de ligas de titânio e produto obtido

É descrita a invenção de um método de modificação da superfície 5 de ligas de titânio empregando a oxidação anódica em ligas de Ti- 30Ta e Ti-7,5Mo para a obtenção de nanotubos perpendiculares ao substrato com diâmetro de 80-120 nm e comprimento de 100 nm-500 nm.

Avaliação do processo de contaminação e remediação de água subterrânea por hidrocarbonetos

Pós-graduação em Engenharia Civil e Ambiental - FEB

Armazenamento, tolerância à dessecação e o potencial fisiológico de sementes de híbridos de milho e seus recíprocos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Zoneamento do escoamento superficial da bacia hidrográfica do Rio Paciência, Ilha do Maranhão-MA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização física e química da carne de peito de aves de diferentes idades submetida à maturação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Obtenção de massa de mandioca com adição de maltodextrina de amido de milho waxy

This study aimed to the development of cassava mashed with added maltodextrin of waxy maize starch as an alternative to the semi-ready product. The experimental design was completely randomized using blocks in 4x7 factorial, with three replications. The treatments were the combination of maltodextrin concentrations added in the cassava mass (0, 5, 10 and 15% on dry weight) with storage time (0, 2, 4, 6, 8, 10 and 12 days after preparation) and two condition (environment and refrigerated temperature). The variety chosen to the processing was the IAC 576-70. The data were subjected to variance analysis. The means were compared by Tukey test at 5%. The content of maltodextrin from waxy maize starch to 15% was effective in controlling the increase of texture. The mass of cassava with the addition of maltodextrin showed to be product of easy preparation, showin IAC 576-70g viability to be produced in industrial scale.

Design & seleção de materiais: elaboração e execução de um sistema de informações para projeto do produto: madeiras

Wood is a renewable material and has unique characteristics that stem from its orthotropic properties. The objective of this study was to develop and implement an informational Selection of Materials and Manufacturing Processes appropriate to the activity of Product Design - Woods. Composed of a Digital Information System, distributed, and an ordered collection of samples. The design of a product, carries with it the choice of material, and the choice of a manufacturing process. Information on materials and manufacturing processes are available with different content, media and interfaces. However, such information is not systematized so that they can be recovered, as the need for the designer, especially on wood. This set of methods is called the Selection of Materials and Manufacturing Processes. It is hoped through this study that the methodologies for SMPF are employed by product designers, architects and engineers in Brazil.

O design e o produto: parâmetros projetuais para o planejamento de jogos geométricos pré-escolares

Educational games are responsible for part of the information assimilated by the child, because these games respect the individual learning time, enabling experimentation and, consequently, being an accessory to retain the acquired knowledge spontaneously. However, the analogy between stimulus and reception/result is not always the expected. On the one hand, there are the pedagogues, bearing the knowledge necessary to the children’s development. On the other hand, are the children, who cannot completely assimilate the concept, commonly because of lack of planning on the product. After all, the children become not interested in the game, without developing the expected cognitive abilities planned for the product. Whereas the importance of the games on children’s development, this work aimed to analyze and select educational games presented on the preschool, based on the language exploration from the Design’s knowledge and skills. Specifically, the research intends to investigate games targeted to stimulate geometric concepts, and so, to describe parameters that must be observed during the product planning.

Estratégias construtivas para a configuração do produto de moda

This article approaches possibilities and strategies of building to development of fashion product. It investigates the application of different constructive resources of textile materials of same composition and trim, establishing for this parameters of formal similarity. The conception of products process is conducted by three-dimensional expression, which allows the steps for creating and delivering happen simultaneously. Three-dimensional modeling techniques enable the buildings that are structured by the following features investigated: intervention in the textile surface, insertion of independent elements, and different confection resolutions. The results instigate reflection about the processes involved.

Efeito da vinhaça na membrana impermeabilizante usada nos tanques de armazenamento

This work evaluated the effect of vinasse (residue from sugar cane) in high density polyethylene (HDPE) geomembranes having in mind that it is deposited at temperatures of 80-90˚C on the geomembrane in storage tanks. The objective was to evaluate the resistance of the geomembrane in contact with residue in a total period of 4 months. Physical and mechanical tests, and thermogravimetric analysis (TGA) were used to determine degradation of polymer membranes after chemical immersion. In general, the results obtained show that the vinasse affected the geomembranes significantly in some aspects, for instance, the thickness of the material presented a variation of 7.8%. The average values in both directions at yielding showed a significant loss of tensile strength (34.13%) and strain (23.48%) and an increase in the modulus of elasticity (9.63%). At the rupture the behavior presented the same trend: a loss of 32% for tensile strength and 24.4% for the deformation were observed. Tear strength presented small decrease (4.72%) and puncture resistance a increase of 7.9% after immersion of geomembranes. The TGA tests were not efficient to detect evidence of degradation in samples of geomembranes after exposures, but identified problems in the quality of the supplied material.

Percepção de desconforto na utilização de um produto: ralador de queijo

This study presents an analysis of the discomfort in the use of a cheese grater. Data was collected using a protocol of perceived discomfort and the results show that the subjects with no experience in cooking reported more experiences of discomfort and higher intensity than the subjects with experience in cooking.