Hydrodynamic phenomena in the downcomer during flow rate transients in the primary circuit of a PWR

Mixing phenomena observed when the flow rate in a single loop of the primary circuit is changed can influence the operation of pressurized water reactor (PWR) by inducing local gradients of boron concentration or coolant temperature. Analysis of one-dimensional Laser Doppler Anemometry (LDA) measurements during the start-up and shutdown of pump on a single loop of the ROCOM test facility has been performed. The effect of a step change and a ramped change in the flow rate on the axial and azimuthal velocities was examined. Numerical simulations were also performed for the step change in the flow rate that gave quantitative agreement with the axial velocities. Phenomenological agreement was made on the turbulent kinetic energy; however, observed values were a factor of 2.5 less than the turbulent kinetic energy derived from the measurements. © 2007.

Utilisation of analogous climate locations to produce resilient biodiversity plantings for infrastructure developments

Developers have an obligation to biodiversity when considering the impact their development may have on the environment, with some choosing to go beyond the legal requirement for planning consent. Climate change projections over the 21st century indicate a climate warming and thus the species selected for habitat creation need to be able to withstand the pressures associated with these forecasts. A process is therefore required to identify resilient plantings for sites subject to climate change. Local government ecologists were consulted on their views on the use of plants of non-native provenance or how they consider resilience to climate change as part of their planting recommendations. There are mixed attitudes towards non-native species, but with studies already showing the impact climate change is having on biodiversity, action needs to be taken to limit further biodiversity loss, particularly given the heavily fragmented landscape preventing natural migration. A methodology has been developed to provide planners and developers with recommendations for plant species that are currently adapted to the climate the UK will experience in the future. A climate matching technique, that employs a GIS, allows the identification of European locations that currently experience the predicted level of climate change at a given UK location. Once an appropriate location has been selected, the plant species present in this area are then investigated for suitability for planting in the UK. The methodology was trialled at one site, Eastern Quarry in Kent, and suitable climate matched locations included areas in north-western France. Through the acquisition of plant species data via site visits and online published material, a species list was created, which considered original habitat design, but with added resilience to climate change.

A Circuit Implementing Massive Parallelism in Transition P Systems

ransition P-systems are based on biological membranes and try to emulate cell behavior and its evolution due to the presence of chemical elements. These systems perform computation through transition between two consecutive configurations, which consist in a m-tuple of multisets present at any moment in the existing m regions of the system. Transition between two configurations is performed by using evolution rules also present in each region. Among main Transition P-systems characteristics are massive parallelism and non determinism. This work is part of a very large project and tries to determine the design of a hardware circuit that can improve remarkably the process involved in the evolution of a membrane. Process in biological cells has two different levels of parallelism: the first one, obviously, is the evolution of each cell inside the whole set, and the second one is the application of the rules inside one membrane. This paper presents an evolution of the work done previously and includes an improvement that uses massive parallelism to do transition between two states. To achieve this, the initial set of rules is transformed into a new set that consists in all their possible combinations, and each of them is treated like a new rule (participant antecedents are added to generate a new multiset), converting an unique rule application in a way of parallelism in the means that several rules are applied at the same time. In this paper, we present a circuit that is able to process this kind of rules and to decode the result, taking advantage of all the potential that hardware has to implement P Systems versus previously proposed sequential solutions.

Analogous Reasoning and Case-based Reasoning for Intelligent Decision Support Systems

Methods of analogous reasoning and case-based reasoning for intelligent decision support systems are considered. Special attention is drawn to methods based on a structural analogy that take the context into account. This work was supported by RFBR (projects 02-07-90042, 05-07-90232).

Making Sense of Home and Homeland: Former-Soviet Greeks' Motivations and Strategies for a Transnational Migrant Circuit

Focusing on former-Soviet Greeks' experiences of cross-border movement to Greece, this paper sheds light on the impact of this migration on the social identities of Russian Greeks as a transnational community. It draws on informants’ narratives and ethnographic observations recorded among Greek migrants in their home communities in southern Russia, and shows how their motivation, in their transnational movement, is determined by the ‘push-and-pull’ forces of socio-economic and political transformations in post-Soviet space. In these conditions, Greek identity becomes a resource which facilitates the organisation of transnational migration. The cultural, social and economic differences between the former-Soviet Greek migrants and the native-born population of Greece result in the emergence of a Pontic-Greek cultural identity which emphasises migrants’ connections with the former USSR. The difficulties of economic and cultural adaptation for migrants to Greece are examined in relation to the Russian Greeks' economic strategies within their home communities and their perception of the ‘homeland’ as a constantly contested and relocated social construct.

A Fractional LC − RC Circuit

Mathematics Subject Classification: 26A33, 30B10, 33B15, 44A10, 47N70, 94C05

Protection issue discussion of DC network development:circuit breaker or fault-tolerant converter

This paper provides a discussion on future direct current (DC) network development in terms of system protection under DC-side fault scenarios. The argument between appropriate DC circuit breaker and new DC fault-tolerant converters is discussed after a review on DC technology development and bottleneck issues that require proper solutions. The overcurrent/cost curve of power-electronic DC circuit breakers (CB) superimposed to voltage-source converter (VSC) systems is derived and compared with other possible fault-tolerant power conversion options. This in-advance planning of protection capability is essential for the future development of DC networks.

The effect of circuit parasitics on resonant switched capacitor converters

Switched Capacitor (SC) converters have been used for several years in low-power, power electronic energy conversion systems. However, because of their attractive features such as low-weight and high-density energy conversion and with the emergence of new circuit topologies and SiC switching devices, these circuits have recently been proposed for higher power applications. The resonant switched capacitor topology is a good candidate for high-power due to its very low-switching loss, but circuit parasitic inductance and resistance can have a significant effect on the resonant frequency of each cell. This paper discusses the influence of these parasitics on the performance of the converter and proposes a method by which these parasitics can be estimated. Simulation results and measurements from a hardware prototype are used to validate the technique.

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

Reliability of power converters is of crucial importance in switched reluctance motor drives used for safety-critical applications. Open-circuit faults in power converters will cause the motor to run in unbalanced states, and if left untreated, they will lead to damage to the motor and power modules, and even cause a catastrophic failure of the whole drive system. This study is focused on using a single current sensor to detect open-circuit faults accurately. An asymmetrical half-bridge converter is considered in this study and the faults of single-phase open and two-phase open are analysed. Three different bus positions are defined. On the basis of a fast Fourier transform algorithm with Blackman window interpolation, the bus current spectrums before and after open-circuit faults are analysed in details. Their fault characteristics are extracted accurately by the normalisations of the phase fundamental frequency component and double phase fundamental frequency component, and the fault characteristics of the three bus detection schemes are also compared. The open-circuit faults can be located by finding the relationship between the bus current and rotor position. The effectiveness of the proposed diagnosis method is validated by the simulation results and experimental tests.

The acceptability and utility of voir dire questionnaires in Florida Circuit Civil Court

This study examined the acceptability and utility of the content of an extensive automobile tort voir dire questionnaire in Florida Circuit Civil Court. The ultimate purpose was to find questionnaire items from established measures that have demonstrated utility in uncovering biases that were at the same time not objectionable to the courts. The survey instrument included a venireperson questionnaire that used case-specific attitudinal and personality measures as well as typical information asked about personal history. The venireperson questionnaire incorporated measures that have proven reliable in other personal injury studies (Hans, & Lofquist, 1994). In order to examine judges' ratings, the questionnaire items were grouped into eight categories. Claims Consciousness scale measures general attitudes towards making claims based on one's legal rights. Belief in a Just World measures how sympathetic the juror would be to people who have suffered injuries. Political Efficacy is another general attitude scale that identifies attitudes towards the government. Litigation Crisis scales elicits attitudes about civil litigation. Case Specific Beliefs about Automobile Accidents and Litigation were taken from questionnaires developed and used in auto torts and other personal injury cases. Juror's personal history was divided into Demographics and Trial Relevant Attitudes. Ninety-seven circuit civil judges critiqued the questionnaire for acceptability, relevance to the type of case presented, and usefulness to attorneys for determining peremptories. ^ The majority of judges' responses confirmed that the central dimension in judicial thinking is juror qualification rather than juror partiality. Only three of the eight voir dire categories were considered relevant by more than 50 percent of the judges: Trial Relevant Experiences, Juror Demographics, and Tort Reform. Additionally, several acceptable items from generally disapproved categories were identified among the responses. These were general and case specific attitudinal items that are related to tort reform. We discuss the utility of voir dire items for discerning juror partiality. ^

Dynamic job quoting system for printed circuit board fabrication

This research deals with the development of a dynamic job quotation system for printed circuit board (PCB) fabrication, which can estimate the price and completion time of a job based on customer preference and current capacity of the shop floor. The primary purpose of building a dynamic quotation system is to maximize the company's profit by quoting optimum lead-time and competitive price for the day-to-day orders received from different customers and original equipment manufacturers. The system was developed using MS-Access relational database. Evaluating the output of the system it was observed that the dynamic system provided more reliable estimation of the lead-time needed for fabricating new jobs. The overall price quoted by the system was competitive with higher profit margin when compared to traditional static systems. This system would therefore provide a vital link between the job quoting and scheduling system of the firm enabling better utilization of the available resources.

Circuit-aware design of energy-efficient massive MIMO systems

Densification is a key to greater throughput in cellular networks. The full potential of coordinated multipoint (CoMP) can be realized by massive multiple-input multiple-output (MIMO) systems, where each base station (BS) has very many antennas. However, the improved throughput comes at the price of more infrastructure; hardware cost and circuit power consumption scale linearly/affinely with the number of antennas. In this paper, we show that one can make the circuit power increase with only the square root of the number of antennas by circuit-aware system design. To this end, we derive achievable user rates for a system model with hardware imperfections and show how the level of imperfections can be gradually increased while maintaining high throughput. The connection between this scaling law and the circuit power consumption is established for different circuits at the BS.

Large scale parallel simulations for the assembly of a flip-chip component to a printed circuit

Abstract not available