Insecticidal Effect of Extracts from Native Plants of Mato Grosso do Sul State on Sitophilus zeamais Mots (Coleoptera: Curculionidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aspectos biológicos, morfometria e técnica de criação de Abaris basistriata Chaudoir, 1873 e Selenophorus seriatoporus Putzeys, 1878 (Coleoptera: carabidae)

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Proposta de melhoria do layout de um armazém de vidros automotivos

This work was based on a case study of improvement of the warehouse layout of a multinational automotive glass sector, located in the State of Sao Paulo. The aim was to propose a layout template to be more effective and besides optimizing production would also promote an increase in warehouse packaging capacity for metal containers containing glasses, thus reducing operating costs. To achieve the desired purpose, it was developed two layout proposals and to this end inventory management tools have been used, such as ABC curve and the Spaghetti Diagram, and other concepts of Packaging Engineering and Logistics. By the end of this work, it was obtained as a result, a project in which it was possible to rearrange the packages according the demand, and the developed changes became the most efficient layout both in storage capacity as well as in the internal drive

Resíduos agrícolas e argila expandida no cultivo da orquídea Oncidium baueri Lindl.

For orchid cultivation in containers is essential to select the right substrate, since this will influence the quality of the final product, it serve as a support for the root system of the plants. This study aimed to evaluate different agricultural residues and expanded clay in Oncidium baueri Lindl. orchid cultivation. The plants were subjected to treatments: pinus husk + carbonized rice husk, pinus husk + coffee husk, pinus husk + fibered coconut, pecan nut husk, expanded clay, fibered coconut, coffee husk, carbonized rice husk, pinus husk. After eleven months of the experiment, the following variables were evaluated: plant height; largest pseudo-bulb diameter; number of buds; shoot fresh dry matter; the longest root length; number of roots; root fresh matter; root dry matter; and electric conductivity; pH and water retention capacity of the substrates. Except the expanded clay, the other substrates showed satisfactory results in one or more traits. Standing out among these substrates pinus husk + coffee husk and pine bark + fibered coconut, which favored the most vegetative and root characteristic of the orchid. The mixture of pinus husk + coffee husk and pinus husk + fibered coconut, provided the best results in vegetative and root growth of the orchid Oncidium baueri and the expanded clay did not show favorable results in the cultivation of this species.

Techniques to improve the maintenance of a laboratory colony of Nyssomyia neivai (Diptera: Psychodidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise estrutural de aerogéis via espalhamento de luz a baixo ângulo

The sol-gel process is a method for obtaining vitreous or vitro-ceramic materials which, are prepared a sol and by drying the liquid phase. This technique has been used extensively for the preparation of glassy gels, films, fibers and particles from the hydrolysis and polycondensation reactions of metal alkoxides. The usual methods for drying are: evaporation drying (xerogels), freeze drying (criogéis) and via supercritical CO2 extraction (aerogels). In the present work, we studied the preparation of silica gels by the sol-gel process from the hydrolysis of alkoxides tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). The hydrolysis was promoted from GPTS and TEOS in proportion (4: 1) under acidic conditions. The hydrolysis reaction was promoted inside a Becker at room temperature. After hydrolyses the prepared sol had pH 2, and kept under mechanical agitation for a period of 1 hour. In order to accelerate the polycondensation reaction, the pH was corrected to a value near 5 by slowly adding NH4OH. Then the sols were leaked in sealed polycarbonate containers and maintained for 20 days at 40°C for gelation. Silica aerogels were prepared via supercritical CO2 extraction of the wet gel at temperature and pressure higher than 31°C and 74 atm, in an autoclave specially developed for the process. The structural characteristics were studied in the dry gel (aerogel). Aerogels were then characterized by nitrogen adsorption and small angle light scattering. The nitrogen adsorption data were analyzed for the determination of the BET specific surface (SBET), the total pore volume Vp, the pore mean size (lP=4Vp/SBET), the particle mean size (lS) and the pore size distribution (PSD). And the data from small angle light scattering were analyzed to determine the correlation function (γ'), the area per unit volume (S/V), average pore size (l ) and the average particle size...

Viabilidade do recipiente biodegradável na produção de mudas florestais nativas

Pós-graduação em Ciência Florestal - FCA

Microbiota fúngica de passeriformes de cativeiros da Região Noroeste do Estado de São Paulo

Birds are hosts for a rich fungal microbiota which can act as potent pathogens for humans and other species of animals, causing thereby serious public health problems. The objective of this study was to evaluate the participation of birds kept in containers in the epidemiology of infectious diseases such as cryptococcosis and aspergillosis, thus verifying the maintenance and spread of pathogens in the environment. 36 samples of excretas of passeriformes were collected and were cultivated in Sabouraud Dextrose Agar 4% at room temperature and 37°C. The isolated fungal colonies were classified according to their morphological and staining characteristics. Subsequently, those in yeast form were peaked in Niger Agar, incubated at 30°C. In one sample showed growth of more than one type of colony and there was verified the presence of 25.0% of Penicillium spp., 19.4% of Trichosporon spp., 13.9% of C. gattii, 11.1% of C. neoformans, 11.1% of Candida spp., 8.3% of Rhizomucor spp., 8.3% of Aspergillus spp., 2.8% of Nigrospora spp. and 2,8% of Geotrichum spp. It can be conluded by the expost that birds shed continuously pathogenic microorganisms in their feces acting in definitive form in the infectious diseases ecoepidemiology.

Effect of polymerization techniques and cleaning solution on flexural resistance of acrylic resin chemically activated

The purpose of this study was to evaluate the impact of different disinfection solutions on flexural resistance of chemically-activated acrylic resin. Test pieces were made of clear acrylic resin using a rectangular mold and employing two techniques: wet polymerization under pressure (n = 20) and dry polymerization under pressure (n = 20). Test pieces were subdivided into four equal groups: distilled water (control), sodium bicarbonate, 1% sodium hypochlorite and effervescent ats. The 30-day cycling technique consisted of immersing the test pieces in 100 ml of solution for 10 min three times a day and placing them in closed containers containing artificial saliva at 37°C. Subsequently, the flexural resistance of samples was tested. Data were analyzed using two-way analysis of variance (ANOVA) with forces serving as the dependent variables and the polymerization technique and cleaning agents as independent variables. Post hoc multiple comparisons were performed using Tukey’s test. There was no statistically significant difference in the flexural strength between the two polymerization techniques. The greatest flexural strength was observed for the effervescent tablets group followed by the control and 1% sodium hypochlorite groups which were statistically similar. Thus, the sodium bicarbonate solution caused the lowest flexural resistance of the test pieces.

Gerenciamento de resíduos odontológicos no serviço público

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da termociclagem sobre a estabilidade de cor de diferentes matizes de resina composta

The objective was to evaluate the effect of thermocycling on the color variation of three different composite resins . We studied was Resin Enamel on 3 levels : ( Esthetic X , Opallis and Venus ) ; Resin Dentin in three levels : ( Esthetic X , Opallis and Venus ) and Thermocycling on level 1 : ( 3,000 cycles ) ; variable was the change of color gauged by spectrophotometry . 60 specimens , subdivided into 6 groups were made : GI - Esthetic X Enamel ; GII - Esthetic X dentin ; GIII - Opallis Enamel ; GIV - Opallis dentin ; GV - Enamel and GVI Venus - Venus dentin . The specimens were prepared with a matrix to standardize samples . The inserts of incrementally resins and polymerized with a halogen light Ultralux unit ( Dabi Atlante , Brazil ) with a power of 450mW / cm ² . After fabrication , underwent color reading with a UV Visible Spectrophotometer reflection , UV -2450 ( Shimadzu , Kyoto , Japan ) , with the changes calculated by the system CIE L * a * b * . Then isolates were stored in artificial saliva at 35 ° C ± 2 ° C during 3 months containers being subjected to the effects of thermal cycling for 3000 cycles over the range of 5C to 55C . Again subjected to chromatic evaluation. For the analysis of the results of color change of the studied resins was applied ANOVA two factors at 5 % . The results showed a statistically equal resins enamel GI and GV ( p = 0.79 ) ; the same was not observed for GI and G III resins , where the color change was higher for resin G III ( p = 0.0000002 ) . The same was observed between G III and GV , where the resin enamel G III showed a statistically superior to the color change ( p = 0.0000005 ) Average . Resins to dentin was there a statistical equality between the materials studied . We conclude that the resins studied change in color and resin enamel G III was the most suffered major color changes after aging by thermocycling .

Avaliação da migração de nifas de Scaptocoris carvalhoi Becker, 1967 (Hemiptera, Cydnidae) em plantas de importância econômica e invasora em teste com oportunidade de escolha

One of the factors that affect the control of brown - roots environmental bedbug is the wide availability of plant species. Thus, this study aimed to evaluate the migration of nymphs of the brown - roots between plant species of economic importance and invasive stinkbug. Eight species of plants have been established in a set formed by eight circular PVC containers, connected symmetrically with free communication to a central circular container. The experiment was arranged in a completely randomized design and consisted of eight treatments and six replications. The test evaluations were performed on 15o , 30o , 45o and 60o days after the release of the nymphs, by counting the insects that migrated to the roots of different plants. It was observed that by the 30o day of early release nymphs, no significant differences (P < 0,05) in the choices nymph by plants. B. alata at 15 days of initial release and B. alata and grass-dictyoneura at 30 days were plants that had higher migration. All counts were carried out on 45o and 60o days, the migration of U. brizantha cv. Marandu presented significantly higher than all other species tested plants nymphs.

Desempenho da aplicação foliar de zinco em feijoeiro

The nutritional requirements of crops, in general, becomes more intense with the beginning of the reproductive phase, being more critical at the time of seed formation, when considerable amounts of nutrients are they translocation, this requirement should be increased to the fact that nutrients are essential to training and development of new bodies of booking. This study aimed to evaluate the agronomic efficiency of foliar application of zinc (zinc oxide Zn 700 g L-1 ) in bean plant, compared to leaf application of zinc sulphate (ZnSO4) and control (without application of Zn). The experiment was installed in the Faculty of Agricultural Sciences - UNESP / Campus de Botucatu-SP. Was placed in containers with a capacity of 20L of soil and leaf applications encompassing four schemes and two of rain, with 5 replicates per treatment, a total of 40 vessels. The results for the factorial design did not show in general, significantly different answers when evaluated on the simulation of rain or the lack of simulation. The treatment (700g L-1 of ZnO) has demonstrated agronomic efficiency as its foliar application, with results equal or exceed the application of ZnSO4 and control when applied at the same dose of Zn.

Produção de biodiesel etílico utilizando óxidos mistos derivados de hidróxidos duplos lamelares como catalisadores

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aspectos de engenharia da produção do fungo entomopatogênico Metarhizium anisopliae em biorreator de bandeja

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE