The effect of poly(lactide)-poly(carbonate) based block copolymers on the morphology and crystallization of double crystalline poly(lactide)/poly(ε-caprolactone) blends

Block copolymers of poly(lactide) and poly(carbonate) were synthetized in three different compositions and characterized by 1H-NMR and ATR analyses. The compatibilization effect of this copolymers on 80/20 (w/w%) PLA/PCL blend was evaluated. SEM micrographs show that all the blends exhibit the typical sea-island morphology characteristic of immiscible blends with PCL finely dispersed in droplets on a PLA matrix. Upon the addiction of the copolymers a reduction on PCL droplets size is observable. At the same time, a Tg depression of the PLA phase is detected when the copolymers are added in the blend. These results indicate that these copolymers are effective as compatibilizers. The copolymer that acts as the best compatibilizer is the one characterized by the same amount of PLA and PC as repeating units. As result, in the blend containing this copolymer PLA phase exhibits the highest spherulitic growth rate. An analyses on PLA phase crystallization behaviour from the glassy state within the blends was evaluated by DSC experiments. Isothermal cold crystallization of the PLA phase is enhanced up an order of magnitude upon the blending with PCL. Annealing experiments demonstrated that the crystallization of the PCL phase induces the formation of active nuclei in PLA when cooled above cooled below Tg. When the crystallization rate of PCL is retarded, a reduction on PLA nucleation is observed.

Melhoria do processo de lavação das rolhas de cortiça

O presente trabalho, realizado na empresa Amorim & Irmãos, S.A. teve como principal objetivo a avaliação e otimização da lavação de rolhas de cortiça técnicas, designadas por Twin Top®, em termos do perfil de consumo de reagentes químicos e do desenvolvimento da sua brancura. Para tal foi desenvolvida uma metodologia de análise de brancura de rolhas Twin Top® que serviu de base para a determinação de uma gama de brancuras aceitável. Para além disto, efetuou-se a avaliação do processo de lavação atualmente praticado e apartir do qual se realizaram os ensaios de otimização a nível laboratorial e piloto. Foram aplicados diferentes métodos de análise tais como, UV-Vis, FTIR-ATR, RMN e brancura ISO. Tendo como base de análise os espetros de refletância difusa de espetroscopia de UV-Vis foi proposta uma metodologia de determinação da brancura de rolhas Twin Top® a 457nm, adoptando as condições da Norma ISO 3688, aplicada na indústria da pasta e papel. De seguida, aplicando o método anteriormente definido, analisaram-se 1000 rolhas Twin Top® de lavação branca. Sendo que os resultados demonstraram que para rolhas dentro de especificação a brancura ISO deve estar entre os 30 e 35%. Foram ainda analisadas rolhas de diferentes classes visuais e provenientes de várias máquinas de lavação da fábrica para determinar possíveis diferenças. Para proceder à avaliação da lavação existente analisaram-se as colas usadas na produção das rolhas, um grânulo de cortiça e a matéria seca do efluente de lavação por FTIR-ATR e RMN. Desta avaliação resultou a presença de compostos de cortiça e cola degradada no efluente de lavação. Determinou-se a concentração dos reagentes intervenientes no processo que se mostraram de acordo com as especificações indicadas pelos fornecedores. Para a otimização da lavação combinou-se o peróxido de hidrogénio e hidróxido de sódio em diferentes quantidades, concentrações e diferentes tempos de reação o que permitiu identificar a melhor alternativa à lavação convencional. Assim existem duas propostas que devem ser tidas em consideração: uma em que a lavação mantém a mesma sequência da convencional e em que se altera o local de adição dos reagentes, que deve ser o mais próxima e direta possível das rolhas, e a outra em que se reduz o tempo do processo em 29,3 min, que compreende apenas uma oxidação e em que a quantidade de reagentes aplicada corresponde à soma dos volumes de reagentes das três oxidações do processo convencional.

?La utilidad del laboratorio de ciencias como un ambiente de aprendizaje en un contexto de resoluci?n de problemas? Un estudio particular sobre la concentraci?n y temperatura que afectan la velocidad de una reacci?n qu?mica en la educaci?n b?sica.

Desde tiempo atr?s la ense?anza de las ciencias, por ejemplo en la qu?mica, se ha venido desarrollando tradicionalmente una asociaci?n entre la teor?a que se ense?a en los salones de clase y el trabajo pr?ctico de laboratorio. Pero, en este ?ltimo es donde se ha puesto muchas veces la mirada, para determinar si cumple con la funci?n designada. Sin embargo, a lo largo de los a?os, se ha presentado una mirada hist?rica suficiente y una discusi?n pedag?gica para saber si ?ste espacio acad?mico cumple o no con los objetivos planteados. En una mirada a este ambiente de aprendizaje, se identificaron dos situaciones: 1. Si los profesores realizan o no trabajo pr?ctico de laboratorio, si son claros los objetivos de ?stos, desde una visi?n integral: ?Cu?l es la funci?n que cumple el trabajo pr?ctico de laboratorio de qu?mica? 2. Es claro para los estudiantes lo que est?n haciendo en los trabajos pr?cticos de laboratorio de qu?mica, su intencionalidad y si se alcanza un aprendizaje significativo por medio de ellos. Al respecto, en muchas investigaciones (Hofstein y Lunetta, 1982; Lynch, 1987; Hodson, 1994; Barber? y Vald?s, 1996), es recurrente que se pronuncien sobre la falta de claridad en los objetivos de los laboratorios en ciencias y la poca utilidad de los laboratorios para lograr una mayor apropiaci?n de los conceptos abordados en clase. Fue importante entonces, cuestionarse si hay alguna diferencia entre un enfoque tradicional y expositivo de ense?anza en las pr?cticas de laboratorio y otro basadas en resoluci?n de problemas (Domin, 1999).

An?lisis del proceso de formulaci?n de la pol?tica p?blica en convivencia familiar para Santiago de Cali 2007: el papel de la red de promoci?n del buen trato

Maestria en Pol?ticas P?blicas

Automatic Target Recognition in Synthetic Aperture Radar Imagery: A State-of-the-Art Review

The purpose of this paper is to survey and assess the state-of-the-art in automatic target recognition for synthetic aperture radar imagery (SAR-ATR). The aim is not to develop an exhaustive survey of the voluminous literature, but rather to capture in one place the various approaches for implementing the SAR-ATR system. This paper is meant to be as self-contained as possible, and it approaches the SAR-ATR problem from a holistic end-to-end perspective. A brief overview for the breadth of the SAR-ATR challenges is conducted. This is couched in terms of a single-channel SAR, and it is extendable to multi-channel SAR systems. Stages pertinent to the basic SAR-ATR system structure are defined, and the motivations of the requirements and constraints on the system constituents are addressed. For each stage in the SAR-ATR processing chain, a taxonomization methodology for surveying the numerous methods published in the open literature is proposed. Carefully selected works from the literature are presented under the taxa proposed. Novel comparisons, discussions, and comments are pinpointed throughout this paper. A two-fold benchmarking scheme for evaluating existing SAR-ATR systems and motivating new system designs is proposed. The scheme is applied to the works surveyed in this paper. Finally, a discussion is presented in which various interrelated issues, such as standard operating conditions, extended operating conditions, and target-model design, are addressed. This paper is a contribution toward fulfilling an objective of end-to-end SAR-ATR system design.

Implication des protéines MCM dans la réponse cellulaire aux dommages à l’ADN

Les protéines MCM (minichromosome maintenance) forment un complexe hétérohexamérique composé des protéines MCM2 à MCM7 qui possède une activité hélicase nécessaire lors de la réplication de l’ADN. Ce complexe est la cible des protéines ATM et ATR, kinases responsables de l’initiation de la réponse cellulaires aux dommages à l’ADN, pour permettre l’arrêt de la réplication lors de la détection de cassure double brin. De plus, les MCM permettent le remodelage de la chromatine par leur activité hélicase mais aussi par leur association avec une chaperone d’histone la protéine ASF1. Toutefois, la majorité des complexes MCM ne co-localisent pas avec les origines de réplication. De plus, la quantité des protéines MCM dans la cellule est nettement supérieure à la quantité requise lors de la réplication. Ces deux faits laissent présager que ce complexe hélicase pourrait jouer un second rôle. Des études effectuées au laboratoire ont démontré une augmentation de la fixation à la chromatine des protéines MCM suite au traitement avec l’étoposide, un inhibiteur de la topoisomérase II qui cause des cassures double brin. L’étude des interactions de la protéine MCM2 par spectrométrie de masse ainsi que par immunobuvardage ont démontré une augmentation de l’interaction entre la protéine MCM2 et ASF1 suite aux dommages. Ceci suggère que les protéines MCM pourraient être impliquées dans les mécanismes de réparation de l’ADN. La nature de l’interaction entre la protéine MCM2 et ASF1 a été déterminée in vitro par des immunobuvardages de type Far western et des Dot blot avec des mutants de la protéine MCM2. Des cellules U2OS-Flp-in ont été utilisées pour générer des lignées stables exprimants les protéines MCM2 à MCM7 avec une étiquette GFP ou fusionnées avec une biotine-ligase (BirA). Les cellules ont été cultivées dans du milieu SILAC et des immunoprécipitations ont été effectuées sur des cellules contrôles (R0K0), des cellules qui expriment MCM-GFP ou BirA (R6K4) non-traitées et des cellules qui expriment MCM-GFP ou BirA traitées à l’étoposide (R10K8). Les immunoprécipitations ont été analysés au spectromètre de masse pour déterminer la modulation des interactions avant et après dommages à l’ADN. Les études d’interactions in vitro ont permis d’identifier que l’interaction entre la protéine MCM2 et ASF1 se situe entre les acides aminés 81-162 sur la protéine MCM2. L’approche de spectrométrie de masse a permis d’identifier plusieurs protéines liant le complexe MCM qui sont impliquées non seulement dans la réplication de l’ADN mais aussi dans le remodelage de la chromatine. De plus, certains de ces nouveaux partenaires augmentent leur interaction avec le complexe suite à l’induction de dommages. Ces résultats suggèrent que les protéines MCM jouent un rôle dans la réorganisation de la chromatine dans les mécanismes de réparation de l’ADN.

Identificação e expressão de genes relacionados à via esteroidogênica e resposta antioxidante após a exposição à Atrazina em Poecilia vivipara (Poeciliidae, Cyprinodontiformes)

O herbicida Atrazina (ATR) é um agrotóxico utilizado há cerca de 50 anos, responsável pelo controle seletivo de plantas daninhas em cultivo de arroz, milho e cana-de-açúcar, principalmente. Estudos recentes apontam diversos efeitos desse herbicida em invertebrados e vertebrados, através da contaminação do solo, bem como da lixiviação para os ecossistemas aquáticos. Foi demonstrado que a ATR é um desregulador endócrino, além de causar efeitos como estresse oxidativo, imunotoxicidade e distúrbios no metabolismo energético. No presente estudo, a espécie nativa Poecilia vivipara foi utilizada como modelo experimental para identificar e analisar a expressão de genes atuantes na via esteroidogênica (StAR e Cyp19a1) e genes atuantes no sistema de defesa antioxidante enzimático (SOD-1 e CAT), frente a exposição à diferentes concentrações de ATR. Sequências parciais dos genes-alvo foram obtidas e comparadas com sequências disponíveis de espécies próximas. Foram analisadas a expressão órgãoespecífica para cada um dos genes isolados, bem como a expressão dos genes frente à exposição ao herbicida atrazina. Os animais foram expostos a ATR em concentrações de 2, 10 e 100 µg/L e a expressão dos genes em gônadas e fígado desses animais foram analisadas em 24 e 96 horas de exposição. As sequências obtidas dos genes StAR, Cyp19a1, SOD-1 e CAT apresentaram 821, 80, 954, 350 pares de bases respectivamente, com identidades que variam de 86 a 100% com espécies filogeneticamente próximas a P. vivipara. Os animais apresentaram uma maior expressão dos genes StAR e Cyp19a1 nas gônadas e no fígado, enquanto a menor expressão se mostrou em órgãos como intestino e baço. Já os genes SOD e CAT apresentaram uma maior expressão no fígado, e menor expressão no intestino. Em relação à expressão gênica frente à exposição à ATR, os resultados apontaram para uma indução dos genes StAR, SOD e CAT em 24 horas, nas gônadas e no fígado, enquanto 8 que a expressão do gene Cyp19a1 foi aumentada apenas após 96 horas de exposição. Foi demonstrado que o herbicida ATR, mesmo em baixas concentrações, é capaz de desregular a expressão de genes que codificam tanto para proteínas componentes da via de síntese de hormônios esteróides, quanto para enzimas atuantes na resposta antioxidante celular de P. vivipara. 

Comprehensive economic and financial analysis of the enterprise activity: approaches, methods and implementation

This thesis intends to analyse the performance and the efficiency of companies and to identify the key factors that may explain it. A comprehensive analysis based on a set of economic and financial ratios was studied as an instrument which provides information on enterprise performance and its efficiency. It was selected a sample with 15 enterprises: 7 Portuguese and 8 Ukrainian ones, belonging to several industries. Financial and non-financial data was collected for 6 years, during the period of 2009 to 2014. Research questions that guided this work were: Are the enterprises efficient/profitable? What factors influence enterprises’ efficiency/performance? Is there any difference between Ukrainian and Portuguese enterprises’ efficiency/performance, which factors have more influence? Which industrial sector is represented by more efficient/profitable enterprises? The main results showed that in average enterprises were efficient; comparing by states Ukrainian enterprises are more efficient; industries have similar level of efficiency. Among factors that influence ATR positively are fixed and current assets turnover ratios, ROA; negatively influencing are EBITDA margin and liquidity ratio. There is no significant difference between models by country. Concerning profitability, enterprises have low performance level but in comparison of countries Ukrainian enterprises have better profitability in average. Regarding the industry sector, paper industry is the most profitable. Among factors influencing ROA are profit margin, fixed asset turnover ratio, EBITDA margin, Debt to equity ratio and the country. In case of profitability both countries have different models. For Ukrainian enterprises is suggested to pay attention on factors of Short-term debt to total debt, ROA, Interest coverage ratio in order to be more efficient; Profit margin and EBITDA margin to make their performance better. For Portuguese enterprises for improving efficiency the observation and improvement of fixed assets turnover ratio, current assets turnover ratio, Short-term financial debt to total debt, Leverage Ratio, EBITDA margin is suggested; for improving higher profitability track fixed assets turnover ratio, current assets turnover ratio, Debt to equity ratio, Profit margin and Interest coverage ratio is suggested.

Influência das espécies do plasma de N2 + O2 nas propriedades físicoquímicas das superfícies do pet

This work reports the influence of the poly (ethylene terephthalate) textile and films surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The plasma surface polymeric modification has been used for many researchs, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, the treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min, using oxygen plasma alternating the treatment time 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) which was varied only the gas composition from 0 to 100% leaving the treatment time remaining constant to all treatment (10 min). The plasma treatment was characterized in-situ with Optics Emission Spectroscopy (OES), and the samples was characterized by contact angle, surface tension, Through Capillary tests, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, scanning electronic Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results showed that oxygen treated fabrics presented high wettability, due to the hydrophilic groups incorporation onto the surface formed through spputering of carbon atoms. For the nitrogen atmosphere, there is the a film deposition of amine groups. Treatment with small oxygen concentration in the mixture with nitrogen has a higher spputered species of the samples

Development of advanced catalytic systems for the selective hydrogenolysis of biomass-derived polyols

195 p.

Multifactorial approach to non-viral gene therapy: development of an efficient system for the retina

Tese de Doutoramento, Ciências Biomédicas, Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2016

Poli-líquidos iônicos e complexos solúveis de Eu3+ e Tb3+ : bioimageamento celular seletivo

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.

Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

A polyester film has a vast application field, due some properties that are inherent of this kind of material such as, good mechanical resistance, chemical resistance to acids and bases and low production cost. However, this material has some limitations as low superficial tension, flat surface, low affinity to dyers, and poor adhesion which impede the use of the same ones for some finality as good wettability. Among the existent techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, polyester films were treated with oxygen plasma varying the treatment time from 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) varying the percentage of each gas the mixture from 0 to 100%, the treatment time remaining constant to all treatments (10 min). After plasma treatment the samples were characterized by contact angle, surface tension, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, with the aim to study the wettability increase of treated polyester films as its variables. In the (O2/N2) plasma treatment of polyester films can be observed an increase of superficial roughness superior to those treated by O2 plasma. By the other hand, the chemical modification through the implantation of polar groups at the surface is obtained more easily using O2 plasma treatment

Síntese e caracterização de nanocompósitos magnéticos empregando polimerização radicalar em meios homogêneo (blk) e heterogêneo (miniemulsão)

Tese (doutorado)—Universidade de Brasília, Instituto de Química, Curso de Pós-Graduação em Química, 2016.

Síntese e caracterização do líquido iônico tetrafluoroborato de 1-metil-3-(2,6-(S)-dimetiloct-2-eno)-imidazol como eletrólito para produção de hidrogênio via eletrólise da água

Ionic liquids (ILs) are organic compounds liquid at room temperature, good electrical conductors, with the potential to form as a means for electrolyte on electrolysis of water, in which the electrodes would not be subjected to such extreme conditions demanding chemistry [1]. This paper describes the synthesis, characterization and study of the feasibility of ionic liquid ionic liquid 1-methyl-3(2,6-(S)-dimethyloct-2-ene)-imidazole tetrafluoroborate (MDI-BF4) as electrolyte to produce hydrogen through electrolysis of water. The MDI-BF4 synthesized was characterized by thermal methods of analysis (Thermogravimetric Analysis - TG and Differential Scanning Calorimetry - DSC), mid-infrared spectroscopy with Fourier transform by method of attenuated total reflectance (FTIR-ATR), nuclear magnetic resonance spectroscopy of hydrogen (NMR 1H) and cyclic voltammetry (CV). Where thermal methods were used to calculate the yield of the synthesis of MDI-BF4 which was 88.84%, characterized infrared spectroscopy functional groups of the compound and the binding B-F 1053 cm-1; the NMR 1H analyzed and compared with literature data defines the structure of MDI-BF4 and the current density achieved by MDI-BF4 in the voltammogram shows that the LI can conduct electrical current indicating that the MDI-BF4 is a good electrolyte, and that their behavior does not change with the increasing concentration of water