Seed production and culture techniques of climbing perch, Anabas testudineus

Six treatments each with 12 replications designed to optimize the dose of inducing agent PG to achieve fertilization and hatching success of climbing perch, Anabas testudineus were tested. The females were given single injection of 7-12 mg PG/kg body weight and the males were given 4 mg PG/kg body weight. Fertilization and hatching rate varied from 67±4.55% to 66±3.0% and 59±4.88% to 57±6.21% for the doses of 10, 11 and 12 mg PG/kg of body weight, respectively. The hormone dose had significant (P<0.05) effect on fertilization and hatching. Six mini shallow cisterns (570 cm x 105 cm) were used to investigate the efficacy of zooplankton and Artemia nauplii as feed for spawn rearing. Three-day old spawns were stocked in six mini shallow cisterns at a stocking density of 100 individuals/L of water. Two treatments each with three replications were used to develop culture technique of the climbing perch. In case of treatment-1, the spawns were fed with Artemia nauplii three times daily, while in treatment-2, zooplankton were used as feed in the same manner as in treatment-1. After 14 days of rearing, mean final weight of the fry of treatments-1 and 2 were 95.55±6.71 and 57.69±5.40 mg, respectively. In treatment-1, spawn fed with Artemia nauplii showed significantly (P<0.05) higher mean weight than the spawn fed with zooplankton (treatment 2).

Import substitution of combination wire rope. Part 1. Design, production and evaluation of a prototype combination wire rope

Model combination wire ropes with different covering materials were prepared and worked out specification for the prototype. A table model hand operated wire rope twisting machine was also developed for this. Prototype combination wire rope was twisted in collaboration with M/s South India Wire Ropes Ltd., Alwaye. Specification details, properties and field performance of the prototype studied are reported.

Import substitution of combination wire rope. Part 2. Production and standardisation of 17 mm dia combination wire rope.

The prototype combination wire rope (Cift-CWR 1) developed for deep sea trawling was further studied for improvement, optimisation of efficiency and standardization. A series of improved prototype combination wire ropes (Cift-CWR 2 to 6) were twisted and evaluated their mechanical properties and reported in this paper with recommendations for a standard 17mm dia combination wire rope of 6S (7C+8+1 Scr) + 6 Crs(6+1+1 Crc) construction.

Impacts of fish sanctuaries on the production and diversity of plankton on beels of haor region in Bangladesh

The experiment was carried out to study the impacts of fish sanctuaries on the production and diversity of plankton in beels of haor region at Mithamain Upazila of Kishoreganj district in Bangladesh during July 2004 to June 2005. A total of 75 (60 phyto and 15 zooplankton) and 74 (59 phyto and 15 zooplankton) genera of plankton were recorded in T-1 and T-2 (with sanctuary) respectively while only 50 (39 phyto and 11 zooplankton) genera were obtained in T-3 (control). Chlorophyceae and Copepoda were the most dominant group of phytoplankton and zooplankton respectively in all the treatments. The total phytoplankton numbers were found to range from 5472 to 35,833 cells/l and 5250 to 40,472 cells/l and total zooplankton from 667 to 1722 cells/l and 611 to 1667 cells/l in T-1 and T-2 respectively in sanctuary sites whereas the ranges of phytoplankton and zooplankton in the control site were 1778 to 29,333 cells/l and 56 to 1056 cells/l respectively. The maximum phytoplankton and zooplankton were recorded during winter season in all the treatments. The ranges of total plankton were 6194 to 37,500 cells/l, 6028 to 41,806 cells/l and 1889 to 29,444 cells/l in T-1, T-2 and T-3 respectively. The phytoplankton, zooplankton and total plankton recorded in treatments with sanctuary were significantly higher (p<0.5) than the treatment without sanctuary (control) indicating positive impacts of sanctuaries on the production of plankton. Between two treatments of fish sanctuaries the total plankton populations were comparatively higher in T-2 than T-1.

Year-round and rotational freshwater prawn, Macrobrachium rosenbergii and paddy farming: soil quality, production and economics

A study was carried out at five upazillas (Dumuria, Fakirhat, Pirojpur sadar, Gopalgonj sadar and Kalia) of five southern districts of Khulna, Bagerhat, Pirojpur, Gopalgonj and Narail to understand the comparative production performance and any effect on soil quality in case of year-round golda (Macrobrachium rosenbergii), alternate prawn-paddy and year-round paddy farming. A direct interview of 55 farmers was taken, using pretested questionnaire, and soil samples were taken from selected farms before and after each crop. Among the five upazillas, farmers in Gopalgonj sadar and Kalia are not practicing year-round golda. Rotational golda-paddy farming has been recorded to result in maximum profit, with the highest of Tk. 310,912/ha/year in 2003 at Dumuria. Only paddy farming is less profitable than other two cropping patterns, irrespective of study sites. The nutrient status of soil in rotational golda and paddy farming has been found improved, compared to that of only golda or paddy farming.

Production and processing of graphene and 2d crystals

Graphene is at the center of an ever growing research effort due to its unique properties, interesting for both fundamental science and applications. A key requirement for applications is the development of industrial-scale, reliable, inexpensive production processes. Here we review the state of the art of graphene preparation, production, placement and handling. Graphene is just the first of a new class of two dimensional materials, derived from layered bulk crystals. Most of the approaches used for graphene can be extended to these crystals, accelerating their journey towards applications. © 2012 Elsevier Ltd.

Production and characterization of a hydraulic microactuator

In order to improve the power density of microactuators, recent research focuses on the applicability of fluidic actuation at the microscale. The main encountered difficulties in the development of small fluidic actuators are related to production tolerances and assembly requirements. In addition, these actuators tend to comprise highly three-dimensional parts, which are incompatible with traditional microproduction technologies. This paper presents accurate production and novel assembly techniques for the development of a hydraulic microactuator. Some of the presented techniques are widespread in precision mechanics, but have not yet been introduced in micromechanics. A prototype hydraulic microactuator with a bore of 1 mm and a length of 13 mm has been fabricated and tested. Measurements showed that this actuator is able to generate a force density of more than 0.23 N mm-2 and a work density of 0.18 mJ mm-3 at a driving pressure of 550 kPa, which is remarkable considering the small dimensions of the actuator. © 2005 IOP Publishing Ltd.

Palm frond biochar production and characterisation

Palm oil has been the world's main source of oil and fats since 2004, producing over 45 million tonnes in 2009. Malaysia alone has over 4·5 million hectares planted with oil palm and, based on common practice, ~300 palm fronds are pruned per hectare per year. This agricultural waste is currently either being used as roughage feed or, more frequently, being left between rows of palm trees to prevent soil erosion, or for nutrient recycling purposes. This paper proposes an alternative use for palm frond as a source of biochar. A traditional method commonly use by gardeners in Malaysia to improve soil fertility was used to produce the biochar. A shallow earth pit was dug in the ground for the carbonisation process. The process is described and the impact of carbonisation on the earth wall is analysed and presented. The process was later re-assessed by using TGA-FTIR. Most of the hemicelluloses had fully disintegrated, but the depolymerisation of the cellulose was still incomplete at the carbonisation temperature. Most of the lignin aromatic structure was still present in the biochar. The carbonisation process was repeated in the laboratory and biochar was characterised by using BET, SEM and FTIR. An adsorption isotherm study was conducted and the experimental data were fitted to the Langmuir model. The model predicted Pb2+ adsorption rates of 83·3 mg/g, Cu2+ 41·4 mg/g, Ni2+ 13·0 mg/g and Zn2+ 19·7 mg/g. Copyright © The Royal Society of Edinburgh 2012.

Detection of serum and mucosal antibody production and antibody secreting cells (ASCs) in large yellow croaker (Pseudosciaena crocea) following vaccination with Vibrio harveyi via different routes

The kinetics of mucosal and serum antibody response is well as antibody secreting cells (ASCs) production were studied in large yellow croaker following vaccination with inactivated Vibrio harveyi by different routes: oral administration. intraperitoneal (IP) injection and immersion. Indirect ELISA was used to measure the antibody level in serum and cutaneous mucus, and ELISPOT was used to monitor the ASCs derived from gill, blood and head kidney. The data demonstrated that IP injection resulted in the highest antibody levels in the systemic circulation, whereas immersion induced significant antibody levels in mucous. As for the ASCs response, IP injection induced high numbers of ASCs in the head kidney and blood; oral intubation only induced a slight ASCs response in the head kidney: immersion induced a much stronger ASCs response in the gill. These results indicate that mucosal antibodies following immersion immunization are independent of a systemic response and more sensitive, since it could be triggered earlier than serum antibodies. The mucosal antibodies following IP injection immunization may depend oil a systemic immune response. The protective effects of the three vaccination methods were compared by challenging with live V. harveyi. Survival of the three groups of vaccinated fish varied front 40 to 60%. while 100% mortality was found in control fish. Compared with IP and oral vaccination, immersion stimulated higher specific antibody titers in the mucosal system and achieved similar protection, so it is in effective and efficient method for immunizing a large number of fish against V harveyi (C) 2008 Elsevier B.V. All rights reserved.

Daily production and photosynthetic characteristics of Nostoc flagelliforme grown under ambient and elevated CO2 conditions

Diurnal photosynthesis of Nostoc flagelliforme was investigated at varied levels of CO2 concentrations and desiccation in order to estimate the effects of enriched CO2 and watering on its daily production. Photosynthetic activity was closely correlated with the desiccated status of the algal mats, increased immediately after watering, reached a maximum at moderate water loss, and then declined with further desiccation. Increased CO2 concentration enhanced the diurnal photosynthesis and raised the daily production. Watering twice per day enhanced the daily production due to prolonged period of active photosynthesis. The values of daily net production were 1321280 mumol CO2 g (d. wt)(-1) d(-1), corresponding to about 0.6-6.1% daily increase in dry weight. High-CO2-grown mats required higher levels of photon flux density to saturate the alga's photosynthesis in air. Air-grown mats showed higher photosynthetic affinity for CO2 and higher levels of dark respiration compared with high-CO2-grown samples.

Production and characterization of biodiesel from tung oil

The feasibility of biodiesel production from tung oil was investigated. The esterification reaction of the free fatty acids of tung oil was performed using Amberlyst-15. Optimal molar ratio of methanol to oil was determined to be 7.5:1, and Amberlyst-15 was 20.8wt% of oil by response surface methodology. Under these reaction conditions, the acid value of tung oil was reduced to 0.72mg KOH/g. In the range of the molar equivalents of methanol to oil under 5, the esterification was strongly affected by the amount of methanol but not the catalyst. When the molar ratio of methanol to oil was 4.1:1 and Amberlyst-15 was 29.8wt% of the oil, the acid value decreased to 0.85mg KOH/g. After the transesterification reaction of pretreated tung oil, the purity of tung biodiesel was 90.2wt%. The high viscosity of crude tung oil decreased to 9.8mm(2)/s at 40 degrees C. Because of the presence of eleostearic acid, which is a main component of tung oil, the oxidation stability as determined by the Rancimat method was very low, 0.5h, but the cold filter plugging point, -11 degrees C, was good. The distillation process did not improve the fatty acid methyl ester content and the viscosity.