A Harris-Todaro agent-based model to rural-urban migration

The Harris-Todaro model of the rural-urban migration process is revisited under an agent-based approach. The migration of the workers is interpreted as a process of social learning by imitation, formalized by a computational model. By simulating this model, we observe a transitional dynamics with continuous growth of the urban fraction of overall population toward an equilibrium. Such an equilibrium is characterized by stabilization of rural-urban expected wages differential (generalized Harris-Todaro equilibrium condition), urban concentration and urban unemployment. These classic results obtained originally by Harris and Todaro are emergent properties of our model.

Cytokine and antibody production during murine leptospirosis

The aim of the present study was to investigate the kinetics of humoral and cellular responses during leptospirosis. We observed that the presence of tumor necrosis factor-alpha (TNF-α) and interleukin-6 (IL-6) was associated with antibody production and bacterial recovery, and the compromising of both TNF-α and IL-6 in the immunopathogenesis of leptospirosis during an experimental infection of BALB/c mice inoculated with Leptospira interrogans serovar Canicola was verified. Results showed higher levels of TNF-α and IL-6 in the initial phase of infection, in which the greatest bacterial clearance was observed. However, when the bacterial recovery was compared with the kinetics of the production of antibodies, the results revealed a kinetics proportionally inverted to antibody production. This fact may be related to some inhibitory factor which could be responsible for the selective suppression of the cellular immune response. We concluded that during leptospirosis there was a greater mobilization of the cellular immune response activity, mainly in the initial phase of the infectious process, for posterior involvement of the humoral response, and that both TNF-α and IL-6 could be associated with the immunopathogenesis of the disease.

Effect of Boron powder purity on superconducting properties of bulk MgB2

In order to study the influence of the amorphous Boron powder on the superconducting properties, MgB2 bulk samples were prepared using 96% and 99% pure commercial Boron powder as well as 92% commercial Boron powder after purification process. The results showed that the original 96% and the purified 92% powders have larger particle size compared to the pure 99% Boron powder, which leads to reduce magnetic critical current densities. In order to get higher performance MgB2, the purified low grade Boron powder need further control of their microstructure such as smaller particle size to enhance flux pinning from the grain boundaries which represent effective pinning centers. © 2007 Elsevier B.V. All rights reserved.

Study of cutting forces on machinability properties of gray cast iron using new ceramics cutting tools

During gray cast iron cutting, the great rate of mechanical energy from cutting forces is converted into heat. Considerable heat is generated, principally in three areas: the shear zone, rake face and at the clearance side of the cutting edge. Excessive heat will cause undesirable high temperature in the tool which leads to softening of the tool and its accelerated wear and breakage. Nowadays the advanced ceramics are widely used in cutting tools. In this paper a composition special of Si3N4 was sintering, characterized, cut and ground to make SNGN120408 and applyed in machining gray cast iron with hardness equal 205 HB in dry cutting conditions by using digital controlled computer lathe. The tool performance was analysed in function of cutting forces, flank wear, temperature and roughness. Therefore metal removing process is carried out for three different cutting speeds (300 m/min, 600 m/min, and 800 m/min), while a cutting depth of 1 mm and a feed rate of 0.33 mm/rev are kept constant. As a result of the experiments, the lowest main cutting force, which depends on cutting speed, is obtained as 264 N at 600 m/min while the highest main cutting force is recorded as 294 N at 300 m/min.

Ultrasonic material characterization using diffraction-free PVDF receivers

This work describes the use of a large aperture PVDF receiver in the measurement of density of liquids and elastic constants of composite materials. The density measurement of several liquids is obtained with the accuracy of less than 0.2% using a conventional NDT emitter transducer and a 70-mm diameter, 52-μm P(VDF-TrFE) membrane with gold electrodes. The determination of the elastic constants of composite materials is based in the measurement of phase velocity. It is shown that the diffraction can lead to errors around 1% in the velocity measurement when using a pair of ultrasonic transducers (1MHz and 19mm diameter) operating in transmission-reception mode separated by a distance of 100 mm. This effect is negligible when using a pair of 10-MHz transducers. On the other hand, the dispersion at 10 MHz can result in errors of about 0.5%, measuring the velocity in composite materials. The use of an 80-mm diameter, 52-μm thick PVDF membrane receiver allows measuring the phase velocity without the diffraction effects.

Enfermeiros e a família do portador de transtorno mental.

This qualitative study aimed at investigating how mental health nurses acquired knowledge about the theme family during their academic training, how they see families in their daily practice, and how should professional training be considering the presence of the family in the care setting. Data were collected using semistructured questionnaires. Six nurses were interviewed. Data analysis allowed the establishment of three theme categories: Academic and professional training absence of the family theme; the nurses' perception of the family with a mentally ill member; and a new vision of the family the role of teaching. During undergraduate education, nurses acquired little knowledge about the theme family; in the institutional routine, they praise the family as a participant of care; and indicate that the need for knowledge about families is based on the interdisciplinary character of education.

Resistance of rose rootstocks to Meloidogyne hapla nematode

Roses are widely used in landscaping. One of the most important fitossanitary problems of this ornamental plant in gardens is the fitonematodes, especially Meloidogyne hapla, which is the most important one in colder climate regions. This work had the objective of study the resistance of nine rose rootstocks (Rosa multiflora 'Paulista', R. multiflora 'Japanese', R. multiflora 'Iowa', R. multiflora 'Kopman's', R. indica × multiflora, R. indica 'Mayor', R. sp. 'Natual Brier', R. manetti and R. canina 'Inermis') to Meloidogyne hapla nematode. Ten replications of each rootstock were used. The roots, collected in a commercial area of cut roses, visually had galls there were isolated and identified. The inoculum of M. hapla was previously produced in rose and tomatoes seedlings under greenhouse conditions. The plants were harvested ninety days after inoculation. The roots were washed and the number of eggs and juveniles recuperated in the root system of each plant was estimated by the Final Population (FP), and the Reproductive Factor (RF) was calculated. The rootstocks with RF<1 values were considered resistant, and the ones with RF>1, susceptible. Rosa manetti and Rosa sp. 'Natual Brier' rootstocks showed the lowest values for RF, indicating that, although they are susceptible, they provide the lowest nematode reproduction. Based on the RF values, it was concluded that all the rose rootstocks evaluated were susceptible to M. hapla nematode.

La cooperación regional en los campos financiero y monetario

Incluye Bibliografía

Gasto, inversión y financiamiento para el desarrollo sostenible en Argentina

Incluye Bibliografía

Perfil longitudinal e a aplicação do índice de gradiente (RDE) no rio dos Patos, bacia hidrográfica do rio Ivaí, PR

This paper presents the results of the longitudinal profile analysis and the application of gradient index (RDE) in the Patos River, a tributary of the Ivaí River basin, PR. The goal is identify and quantify the anomalous zones along river course concerning their genesis - activity neotectonic or/and lithological imposition. The Patos River has a length of 127 km and a relief amplitude of 660 m, The occurrence of an important knickpoint in the middle course the Patos River can be divided into two stretches. Of the 22 sections measured, 10 were considered anomalous, distributed in both upper and lower course. In the upper course, over a basaltic bedrock of the Serra Geral Formation the RDE values are lower than those in the lower course, where river flows over sedimentary rocks of the Terezina Formation. The 2 nd order anomalies are related to lithological changes, relief alignments and channel confluences - as in the case of São João River. The 1st order anomalies are linked to differences in rock resistance associated with structural control, which provides the formation of waterfalls.

Germinação de sementes de algodoeiro provenientes de plantas submetidas a diferentes densidades larvais do curuquerê-do-algodoeiro

The cotton crop yield is directly associated with the efficient control of pests. This work evaluated the relationship of different densities of A. argillacea per plant at different cotton plant ages with seed germination of four cotton cultivars: IAC 25, Delta Opal, Fibermax 993, and Fibermax 966. A randomized block design was set up in 4x3 factorial with four replications. Densities of larvae per plant (0, 2, 4, and 6 larvae) was the major factor while plant ages (30, 60 and 90 days after emergency - DAE) the second level factor. Larvae were released on plants with 30, 60 and 90 DAE. The seeds were manually picked, for the evaluation of the germination in the laboratory using the seed viability through sand emergency method. The results showed that studied cotton cultivars differently to defoliate caused by A. argillacea larvae; the cotton development stage had more influence in the physiologic quality of the seeds than the defoliation; the germination is negatively affected when the defoliation took place at 60 DAE.

Endurance training does not change the relative intensity at lactate threshold in elderly

Aim. The aim of the study was to verify whether endurance training may induce changes on the percentage of peak heart rate (% peak HR) at the lactate threshold (LT) intensity in untrained elderly. Methods. Sixteen healthy men (64.3 ± 4.1 yrs) underwent an incremental test on cycloergometer to determine the LT and the corresponding % peak HR at LT intensity. Afterwards, they were randomly distributed into two groups (n = 8 each): endurance training (ET) and control (C). The ET exercised 3 days a week for 12 weeks. The training session was divided into warm-up (5 min at 50% of LT;), a main part, and a cool-down (5 min 50% below of LT). The main part had a gradual increased volume through the weeks of 2 min. The initial volume on the 1st week was 25 min reaching 47 min at the 12th week. The relative intensity was kept constant (90 to 100% of LT). Results. After 12 weeks, the % peak HR at LT did not change significantly for both groups P > 0.05 (ET 82.9 ± 4.1 vs. 82.5 ± 3.4 and Ç 80.2 ± 7.1 vs. 81.8 ± 7.1). Conclusion. We conclude that endurance training proposed does not change the relative intensity at LT in elderly.

Diretrizes para implantação coletiva e semipresencial de sistemas certificáveis de gestão

This paper aims to develop guidelines for the collective and semi-presence-based implementation of (a situation in which there is no active participation of a consultant specialist in the company) certifiable management systems. These systems include ISO 9001, ISO 14001, or OHSAS 18001. This is a theoretical and conceptual study which was based on four practical experiences of the theory of collective and semi-presence-based system implementation for the development of the guidelines proposed. These guidelines are drawn up according to the following items: selection of companies; awareness, diagnosis, planning, training, implementation, verification and improvement.