The influence of the flame structure on the combustion oscillations in a cylindrical chamber

An experimental study has been conducted with the objective of investigating the effects of the flame structure in the combustion oscillation conditions into a laboratorial scale cylindrical chamber. The experiments were conducted in a water-jacketed 1-m long by 25-cm internal diameter stainless steel vertical tube. The combustor operated with liquefied petroleum gas (LPG) in both oscillatory and non oscillatory conditions, under the same input conditions. Part of the reactant mixture was excited acoustically, before the burner exit, by a speaker positioned strategically. The burner was aligned with the chamber longitudinal axis and positioned at its bottom. The experiments were conducted for 0.16 g/s of LPG burning in stoichiometric equivalence ratio. To analyze the flame structure the image tomographic reconstruction process were used, and the resultant images were associated to the oscillatory conditions (frequency and amplitude) into the combustion chamber. The main conclusions were: 1) when the flame premixed condition increase, for example 60% of the total air flow rate is premixed with LPG, the region of intense energy released is close to burner exit and strong amplitudes of oscillation (close to 50 mbar) were obtained into the chamber; 2) for long flames, predominantly diffusive flames, just weak amplitudes were detected, in the spite of the speaker exiting the premixed flow; 3) when the energy is released distributed through the combustion chamber, the long flame acts like a baffle. Copyright © 2006 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Temperatura ambiente e concentrações séricas de cortisol em suínos em crescimento-terminação

Thirty-six castrated males and females Landrace x Large-White pigs (74 to 149 days of age) were randomly allotted to two environmental conditions: high temperature in a climatic chamber (HT; 22.2 to 32.8 °C) and comfort temperature in a conventional shed (CT; 17.6 to 26.6 °C), with night-and-day variations. Blood samples were weekly collected from animals of both HT and CT conditions for determination of serum cortisol levels. Cortisol levels of both sexes were not different, and there was no interaction with environmental temperature. Pigs of HT showed significantly higher average cortisol level (P<0.01) than the CT ones (7.06 and 4.82 mg/dL, respectively). Increasing in serum cortisol was continuous and linear (P<0.05) during the experimental period, suggesting the cortisol as a possible indicator of the heat stress in growing-finishing pigs.

Avaliação de métodos de escarificação na superação de dormência de chizolobium parahyba (vell.) blake (Fabaceae: caesalpinioideae)

Dormancy caused by the tegument's impermeability to water is a feature of Schizolobium parahyba seeds. So that the best methodology for overcoming the species's dormancy may be determined, the seeds were submitted to mechanical scarification treatments, using sandpaper and scissors, on the opposite side of the hilum. Chemical scarification was also undertaken with sulfuric (H2SO4) and hydrochloric (HCl) acids for 30 minutes. Seeds were distributed in groups of 25 units in four petri plates. The experiment was undertaken in a BOD germination chamber at 25°C and 120 μmol.m^-2.s^-1. Data were used to calculate the germination capacity (G%), the Germination Velocity Index (IVG) and Mean Germination Time (TM). Imbibation curve was also calculated to analyze the dormancy type of the seeds by using the three-phase model where phase FI was completed in 6 hours and FIII was initiated after 12 hours of imbibation. Results show that whereas pre-germinative treatments trigger S. parahyba germination, mechanical scarification is the most effective method to overcome the species's dormancy.

Novel cellulose/NbOPO 4.nH 2O hybrid material from sugarcane bagasse

In recent years studies concerning the applications of lignocellulosic/ inorganic couples have resulted in the development of an interesting class of functional materials. In this work a cellulose/NbOPO 4.nH 2O hybrid using cellulose from surgacane bagasse was prepared and characterized in order to test for adsorption applications. The preparation process was conducted by carrying out metallic niobium dilution in hydrofluoric acid in the presence of nitric acid, then adding boric acid to form the complex and, finally, the cellulose sugar cane bagasse was added. Concentrated phosphoric acid was also inserted to precipitate hydrous niobium phosphate particles in the cellulose fiber. This material was characterized by X-ray diffractometry (XRD), thermogravimetry (TG/DTG), and scanning electronic microscopy (SEM) connected to an energy dispersive spectrophotometer (EDS). Results by SEM/EDS show that NbOPO 4.nH 2O was present in structure of the cellulose. During the preparation of the material, using boric acid it was observed that the formation of precipitate occurred in a shorter time than the material prepared without boric acid.

Panorama del Caribe = View of the Caribbean

Incluye Bibliografía

Efeito da desinfecção química e do envelhecimento acelerado sobre a estabilidade dimensional, reprodução e manutenção de detalhes e estabilidade de cor do silicone facial Silastic MDX 4-4210 com opacificador

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese e aplicação de sílica mesoporosa modificada com o ligante 4-amino-2-mercaptopirimidina na pré-concentração de Cd (II), Cu(II), Pb(II), Zn(II) e Ni(II) em amostras de águas naturais

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Influência de diferentes misturas em tanque contendo o herbicida 2,4-D no espectro de gotas da aplicação

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Estudo e modelagem 3D de um cabeçote para um motor monocilíndrico, 400cc, 4 T

The cylinder head contains the combustion chamber for the air-fuel mixture and the intake and exhaust valves, the valve guide and the valve seat. The cylinder head also is a support for the camshaft and valve rocker. The holes where the spark plugs are connected are designed to fit the better place in the combustion chamber. The cylinder heads often are manufactured using materials such as aluminum and cast iron. The cooling fins located in the outside of the cylinder head are designed for a good heat transfer and therefore their dimensions and positioning are important. This work aims the calculation for a cylinder head to be installed in a 400 cc displacement, gasoline powered, four stroke, single cylinder engine. According to the displacement it will be analyzed the combustion chamber, the intake and exhaust valves, as well as the camshaft and rocker arms. This also a work to help to accomplish the design of a single cylinder engine, where the alternatives parts, cylinder block and crankcase are all already machined and assembled in this campus

Efeito Pesticida de Ésteres de Sacarose Sobre Calacarus heveae Feres (Acari: Eriophyidae) em Dois Clones de Seringueira

Sucrose esters are biodegradable, non pollutant and safe for health; moreover, they have shown great potential in the pest control. We tested a crude mix of sucrose esters on the survivorship and oviposition of Calacarus heveae Feres (Acari: Eriophyidae) females, an important rubber tree pest mite. The females were collected from rubber leaflets of the GT 1 and RRIM 600 clones. The mites were kept on stock arenas placed in rearing chamber at 28 + 0,1°C, 80 + 10% of relative humidity and 12h of light phase about two weeks before the assays. After this period, the mites were transferred to assay arenas made with leaflets from the same clone of stock arenas. The survivorship of females sprayed with sucrose esters in the concentrations of 1, 2, 3 and 4 g/L and their oviposition effect with 0.5 and 1 g/L were analyzed. The mites sprayed with 4 g/L had about 80% of mortality, while those with 1 g/L around 60%. All mites that died in the treatments with sucrose ester became dark with wrinkled tegument and decreased their body volume, suggesting dehydration. We also observed the efficacy of 1 g/L concentration to decrease the female oviposition in about 50%, in the third day after spraying. No differences were observed in the mortality and oviposition between females kept on both clones.

Um mesmo professor da 1ª à 4ª série do ensino fundamental: uma chance para o sucesso

This article discuses the ramifications of the restructuring of educational institutions of the state basic education in the state of São Paulo in 1996. The changes promoted by the Education Department included the distinction between physical space including students from lower grades of elementary school students and the second cycle of this level of education. More that issues relating to changes in itself, is important here to check the influence that managers exercise, especially school principals in the perception of the community (parents, students etc.) relative to the changes implemented in the field of education. v

As políticas curriculares da educação profissional técnica de nível médio: desafios/correlações do princípio de competência da Resolução CNE/CEB 4/99

This paper proposes some reflections from activities developped in the context of a research supported by FAPESP called “As políticas de educação profissional e tecnológica no Brasil pós LDB 9394/96”. Our purpose is to analyze the federal legislation of professional and technological education, by enphasizing its impacts in technical schools of São Paulo (Brazil).

Assessment of CT numbers in limited and medium field-of-view scans taken using Accuitomo 170 and Veraviewepocs 3De cone-beam computed tomography scanners

To assess the influence of anatomic location on the relationship between computed tomography (CT) number and X-ray attenuation in limited and medium field-of-view (FOV) scans. Materials and Methods Tubes containing solutions with different concentrations of K2HPO4 were placed in the tooth sockets of a human head phantom. Cone-beam computed tomography (CBCT) scans were acquired, and CT numbers of the K2HPO4 solutions were measured. The relationship between CT number and K2HPO4 concentration was examined by linear regression analyses. Then, the variation in CT number according to anatomic location was examined. Results The relationship between K2HPO4 concentration and CT number was strongly linear. The slopes of the linear regressions for the limited FOVs were almost 2-fold lower than those for the medium FOVs. The absolute CT number differed between imaging protocols and anatomic locations. Conclusion There is a strong linear relationship between X-ray attenuation and CT number. The specific imaging protocol and anatomic location of the object strongly influence this relationship.