JULIDE: a software tool for 3D reconstruction and statistical analysis of autoradiographic mouse brain sections.

In this article we introduce JULIDE, a software toolkit developed to perform the 3D reconstruction, intensity normalization, volume standardization by 3D image registration and voxel-wise statistical analysis of autoradiographs of mouse brain sections. This software tool has been developed in the open-source ITK software framework and is freely available under a GPL license. The article presents the complete image processing chain from raw data acquisition to 3D statistical group analysis. Results of the group comparison in the context of a study on spatial learning are shown as an illustration of the data that can be obtained with this tool.

Coronary MR imaging using free-breathing 3D steady-state free precession with radial k-space sampling.

PURPOSE: To investigate the potential of free-breathing 3D steady-state free precession (SSFP) imaging with radial k-space sampling for coronary MR-angiography (MRA), coronary projection MR-angiography and coronary vessel wall imaging. MATERIALS AND METHODS: A navigator-gated free-breathing T2-prepared 3D SSFP sequence (TR = 6.1 ms, TE = 3.0 ms, flip angle = 120 degrees, field-of-view = 360 mm(2)) with radial k-space sampling (384 radials) was implemented for coronary MRA. For projection coronary MRA, this sequence was combined with a 2D selective aortic spin tagging pulse. Coronary vessel wall imaging was performed using a high-resolution inversion-recovery black-blood 3D radial SSFP sequence (384 radials, TR = 5.3 ms, TE = 2.7 ms, flip angle = 55 degrees, reconstructed resolution 0.35 x 0.35 x 1.2 mm(3)) and a local re-inversion pulse. Six healthy volunteers (two for each sequence) were investigated. Motion artifact level was assessed by two radiologists. Results: In coronary MRA, the coronary lumen was displayed with a high signal and high contrast to the surrounding lumen. Projection coronary MRA demonstrated selective visualization of the coronary lumen while surrounding tissue was almost completely suppressed. In coronary vessel wall imaging, the vessel wall was displayed with a high signal when compared to the blood pool and the surrounding tissue. No visible motion artifacts were seen. Conclusion: 3D radial SSFP imaging enables coronary MRA, coronary projection MRA and coronary vessel wall imaging with a low motion artifact level.

Functional calibration procedure for 3D knee joint angle description using inertial sensors.

Measurement of three-dimensional (3D) knee joint angle outside a laboratory is of benefit in clinical examination and therapeutic treatment comparison. Although several motion capture devices exist, there is a need for an ambulatory system that could be used in routine practice. Up-to-date, inertial measurement units (IMUs) have proven to be suitable for unconstrained measurement of knee joint differential orientation. Nevertheless, this differential orientation should be converted into three reliable and clinically interpretable angles. Thus, the aim of this study was to propose a new calibration procedure adapted for the joint coordinate system (JCS), which required only IMUs data. The repeatability of the calibration procedure, as well as the errors in the measurement of 3D knee angle during gait in comparison to a reference system were assessed on eight healthy subjects. The new procedure relying on active and passive movements reported a high repeatability of the mean values (offset<1 degrees) and angular patterns (SD<0.3 degrees and CMC>0.9). In comparison to the reference system, this functional procedure showed high precision (SD<2 degrees and CC>0.75) and moderate accuracy (between 4.0 degrees and 8.1 degrees) for the three knee angle. The combination of the inertial-based system with the functional calibration procedure proposed here resulted in a promising tool for the measurement of 3D knee joint angle. Moreover, this method could be adapted to measure other complex joint, such as ankle or elbow.

Detailed 3D seismic imaging of a fault zone beneath Lake Geneva, Switzerland

An efficient high-resolution (HR) three-dimensional (3D) seismic reflection system for small-scale targets in lacustrine settings was developed. In Lake Geneva, near the city of Lausanne, Switzerland, the offshore extension of a complex fault zone well mapped on land was chosen for testing our system. A preliminary two-dimensional seismic survey indicated structures that include a thin (<40 m) layer of subhorizontal Quaternary sediments that unconformably overlie south-east-dipping Tertiary Molasse beds and a major fault zone (Paudeze Fault Zone) that separates Plateau and Subalpine Molasse (SM) units. A 3D survey was conducted over this test site using a newly developed three-streamer system. It provided high-quality data with a penetration to depths of 300 m below the water bottom of non-aliased signal for dips up to 30degrees and with a maximum vertical resolution of 1.1 m. The data were subjected to a conventional 3D processing sequence that included post-stack time migration. Tests with 3D pre-stack depth migration showed that such techniques can be applied to HR seismic surveys. Delineation of several horizons and fault surfaces reveals the potential for small-scale geologic and tectonic interpretation in three dimensions. Five major seismic facies and their detailed 3D geometries can be distinguished. Three fault surfaces and the top of a molasse surface were mapped in 3D. Analysis of the geometry of these surfaces and their relative orientation suggests that pre-existing structures within the Plateau Molasse (PM) unit influenced later faulting between the Plateau and SM. In particular, a change in strike of the PM bed dip may indicate a fold formed by a regional stress regime, the orientation of which was different from the one responsible for the creation of the Paudeze Fault Zone. This structure might have later influenced the local stress regime and caused the curved shape of the Paudeze Fault in our surveyed area.

Anàlisi de l'aplicació Geomedia 3D

Anàlisi de les diferents funcionalitats de l'aplicació Geomedia 3D i la seva utilitat dins del terreny dels sistemes d'informació geogràfica.

Evolution of a debris flow channel monitored using a 3D terrestrial laser scanner

Like numerous torrents in mountainous regions, the Illgraben creek (canton of Wallis, SW Switzerland) produces almost every year several debris flows. The total area of the active catchment is only 4.7 km², but large events ranging from 50'000 to 400'000 m³ are common (Zimmermann 2000). Consequently, the pathway of the main channel often changes suddenly. One single event can for instance fill the whole river bed and dig new several-meters-deep channels somewhere else (Bardou et al. 2003). The quantification of both, the rhythm and the magnitude of these changes, is very important to assess the variability of the bed's cross section and long profile. These parameters are indispensable for numerical modelling, as they should be considered as initial conditions. To monitor the channel evolution an Optech ILRIS 3D terrestrial laser scanner (LIDAR) was used. LIDAR permits to make a complete high precision 3D model of the channel and its surroundings by scanning it from different view points. The 3D data are treated and interpreted with the software Polyworks from Innovmetric Software Inc. Sequential 3D models allow for the determination of the variation in the bed's cross section and long profile. These data will afterwards be used to quantify the erosion and the deposition in the torrent reaches. To complete the chronological evolution of the landforms, precise digital terrain models, obtained by high resolution photogrammetry based on old aerial photographs, will be used. A 500 m long section of the Illgraben channel was scanned on 18th of August 2005 and on 7th of April 2006. These two data sets permit identifying the changes of the channel that occurred during the winter season. An upcoming scanning campaign in September 2006 will allow for the determination of the changes during this summer. Preliminary results show huge variations in the pathway of the Illgraben channel, as well as important vertical and lateral erosion of the river bed. Here we present the results of a river bank on the left (north-western) flank of the channel (Figure 1). For the August 2005 model the scans from 3 viewpoints were superposed, whereas the April 2006 3D image was obtained by combining 5 separate scans. The bank was eroded. The bank got eroded essentially on its left part (up to 6.3 m), where it is hit by the river and the debris flows (Figures 2 and 3). A debris cone has also formed (Figure 3), which suggests that a part of the bank erosion is due to shallow landslides. They probably occur when the river erosion creates an undercut slope. These geometrical data allow for the monitoring of the alluvial dynamics (i.e. aggradation and degradation) on different time scales and the influence of debris flows occurrence on these changes. Finally, the resistance against erosion of the bed's cross section and long profile will be analysed to assess the variability of these two key parameters. This information may then be used in debris flow simulation.

Disseny i modelació en 3D d'un habitacle en le jaciment ibèric d'Els Vilars

L'objectiu del projecte és reconstruir un habitacle del jaciment ibèric dels Vilars amb els objectes de l'època pertinents. Tot això servirà per obtenir una visió de la vida i les costums dels pobladors ibèrics.

Anàlisi de l'aplicació GeoMedia 3D

Treball de final de carrera sobre els sistemes d'informació geogràfica on s'analitza l'eina GeoMedia 3D i la seva aplicació als SIG 3D. L'anàlisi està fet desenvolupant un model 3D de la ciutat de Tarragona.

Combining MAR elements and transposable vectors for more reliable transgene integration and expression

Integration without cytotoxic effects and long-term expression of a transgene constitutes a major challenge in gene therapy and biotechnology applications. In this context, transposons represent an attractive system for gene transfer because of their ability to promote efficient integration of a transgene in a variety of cell lines. However, the transgene integration can lead to insertional mutagenesis and/or unstable transgene expression by epigenetic modifications. These unwanted events may be limited by the use of chromatin control elements called MARs (matrix attachment regions). Indeed, the insertion of these DNA elements next to the transgene usually results in higher and more stable expression by maintaining transgene chromatin in an active configuration and preventing gene silencing. In this study, we tested if the inclusion of the MAR 1-68 in the piggyBac transposon system may lead to efficient and safer transgene integration and ensure reliable stable and long-term expression of a transgene. The MAR-containing transposon construct was tested in CHO cells, for biotechnology applications, and in mesoangioblast cells that can differentiate into muscle cells and are important candidates for potential stem cell therapies of myopathies. We showed that the addition of the MAR 1 -68 in the piggyBac transposon did not interfere with transposition, thereby maintaining high frequency of transgene integrations in these cells. Moreover, the MAR allowed higher transgene expression from fewer transposon integration events. We also found that enriched transgene-expressing cell populations could be obtained without the need of selection pressure. Since antibiotic-enforced selection protocols often result in a higher integrated copy number and mosaic expression patterns, this strategy could benefit many applications in which a low copy number of integrated transgenes and antibiotic-free conditions are desired. In addition, the intramuscular transplantation of mouse tibialis anterior muscles with mesoangioblasts containing the transposon led to widespread and sustained myofiber transgene expression after differentiation of these cells in vivo. These findings indicated that piggyBac vectors may provide a viable approach to achieve stable gene transfer in the context of Duchenne muscular dystrophy therapy. - L'intégration sans effets cytotoxiques et l'expression à long terme d'un transgène constituent un défi majeur en thérapie génique et en biotechnologie. Dans ce contexte, les transposons représentent un système attrayant pour le transfert de gènes en raison de leur capacité à promouvoir l'intégration efficace d'un transgène dans une variété de lignées cellulaires. Toutefois, l'intégration d'un transgène peut conduire à une mutagénèse insertionnelle et/ou à une expression instable due au silençage du transgène suite à des modifications épigénétiques. Ces événements indésirables de silençage génique peuvent être diminués par l'utilisation d'éléments de contrôle de la chromatine appelés MAR (matrix attachment region). En effet, l'insertion de ces éléments d'ADN à proximité du transgène se traduit généralement par une expression plus élevée et plus stable de celui-ci, en permettant le maintien d'une chromatine dans une configuration active autour du transgène et en empêchant l'inactivation du gène. Dans cette étude, nous avons testé si l'inclusion du MAR 1-68 dans le système transposon piggyBac peut améliorer l'efficacité d'intégration de façon sécuritaire et l'expression à long terme d'un transgène. Le transposon contenant l'élément MAR a été testé dans les cellules CHO, couramment utilisées en biotechnologie, et dans des cellules progénitrices appelées mésoangioblastes, qui peuvent se différencier en cellules musculaires, et qui constituent ainsi des candidats prometteurs pour la thérapie à partir de cellules souches de patients souffrant de myopathie. Nous avons montré que l'addition du MAR 1-68 dans le transposon piggyBac n'interfère pas avec la transposition et permet de maintenir une fréquence élevée d'intégration du transgène dans ces deux types cellulaires. De plus, il semble que cette association mène à une meilleure expression du transgène à partir de peu d'événements d'intégration du transposon. En outre, ces populations enrichies en cellules exprimant de façon stable le transgène ont pu être obtenues sans avoir recours à une pression de sélection. Etant donné que les protocoles de sélection basée sur l'utilisation d'antibiotiques conduisent souvent à un nombre plus élevé de copies intégrées et à la variégation de l'expression du transgène et qu'ils impliquent une longue culture in vitro, cette stratégie pourrait profiter à des applications pour lesquelles on souhaite un faible nombre de copies intégrées et/ou l'utilisation d'antibiotiques n'est pas souhaitable. De plus, la transplantation intramusculaire de mésoangioblastes contenant le transposon dans le muscle tibial antérieur de souris a conduit, après la différentiation de ces cellules in vivo, à une expression constante et étendue du transgène dans les myofibres. Ces résultats indiquent que les vecteurs piggyBac pourraient fournir une approche viable pour assurer un transfert de gènes stables dans le contexte d'un traitement de la dystrophic musculaire de Duchenne.

Anàlisi de l'aplicació GeoMedia 3D

Aquest treball es centra en la utilització i aplicació de les tecnologies dels sistemes d'informació geogràfica. En concret es realitza una pràctica sobre la ciutat de Lleida per poder veure certs edificis que compleixen una sèrie de premisses. En el projecte es fa una anàlisi de l'aplicació GeoMedia 3D.

Conditional and syllogistic deductive tasks dissociate functionally during premise integration.

Deduction allows us to draw consequences from previous knowledge. Deductive reasoning can be applied to several types of problem, for example, conditional, syllogistic, and relational. It has been assumed that the same cognitive operations underlie solutions to them all; however, this hypothesis remains to be tested empirically. We used event-related fMRI, in the same group of subjects, to compare reasoning-related activity associated with conditional and syllogistic deductive problems. Furthermore, we assessed reasoning-related activity for the two main stages of deduction, namely encoding of premises and their integration. Encoding syllogistic premises for reasoning was associated with activation of BA 44/45 more than encoding them for literal recall. During integration, left fronto-lateral cortex (BA 44/45, 6) and basal ganglia activated with both conditional and syllogistic reasoning. Besides that, integration of syllogistic problems additionally was associated with activation of left parietal (BA 7) and left ventro-lateral frontal cortex (BA 47). This difference suggests a dissociation between conditional and syllogistic reasoning at the integration stage. Our finding indicates that the integration of conditional and syllogistic reasoning is carried out by means of different, but partly overlapping, sets of anatomical regions and by inference, cognitive processes. The involvement of BA 44/45 during both encoding (syllogisms) and premise integration (syllogisms and conditionals) suggests a central role in deductive reasoning for syntactic manipulations and formal/linguistic representations.