Image guided critical screw placement precision in the cervical spine : important or incidental? : results of a series of 91 consecutive cases using OVEM

Study design: A retrospective study of image guided cervical implant placement precision. Objective: To describe a simple and precise classification of cervical critical screw placement. Summary of Background Data: "Critical" screw placement is defined as implant insertion into a bone corridor which is surrounded circumferentially by neurovascular structures. While the use of image guidance has improved accuracy, there is currently no classification which provides sufficient precision to assess the navigation success of critical cervical screw placement. Methods: Based on postoperative clinical evaluation and CT imaging, the orthogonal view evaluation method (OVEM) is used to classify screw accuracy into grade I (no cortical breach), grade la (screw thread cortical breach), grade II (internal diameter cortical breach) and grade III (major cortical breach causing neural or vascular injury). Grades II and III are considered to be navigation failures, after accounting for bone corridor / screw mismatch (minimal diameter of targeted bone corridor being smaller than an outer screw diameter). Results: A total of 276 screws from 91 patients were classified into grade I (64.9%), grade la (18.1%), and grade II (17.0%). No grade III screw was observed. The overall rate of navigation failure was 13%. Multiple logistic regression indicated that navigational failure was significantly associated with the level of instrumentation and the navigation system used. Navigational failure was rare (1.6%) when the margin around the screw in the bone corridor was larger than 1.5 mm. Conclusions: OVEM evaluation appears to be a useful tool to assess the precision of critical screw placement in the cervical spine. The OVEM validity and reliability need to be addressed. Further correlation with clinical outcomes will be addressed in future studies.

Consultation pluridisciplinaire "Souffrance au travail": une expérience romande [Multidisciplinary consultation "Suffering at work": an experience in western Switzerland].

Les problèmes de santé mentale au travail constituent un défi à la fois clinique, professionnel, économique et de santé publique. Les coûts totaux qu'ils génèrent en Suisse équivalent à 3,2 % du produit intérieur brut (PIB) suisse et ils aboutissent très souvent à un licenciement. La grande majorité des personnes sont soignées par un médecin de premier recours. L'Institut de Santé au Travail propose une consultation spécialisée dans les questions de souffrance au travail, offrant aux soignants de première ligne un avis ou un soutien pluridisciplinaire, dans une perspective collaborative des soins. Son action, adaptée aux besoins de chaque situation, va d'un avis à une orientation vers des spécialistes pouvant étoffer durablement le réseau (suivi psychiatrique, programme de soutien à l'emploi, avis juridique ou social). Mental health problems at work constitute a challenge in the clinical feld, as well in the professional, the economic and the public health perspective. The total costs they generate in Switzerland are equivalent to 3.2% of the Swiss gross domestic product and they very often lead to dismissal. The vast majority of people are treated by their primary care physician. The Institute for Work and Health features a specialized consultation on the topic of suffering at work, offering the primary care physicians a pluridisciplinary advice or support, in a collaborative care prospect. Its action, adapted to each situation's needs, goes from an advice to a referral to specialists that can strengthen the network on a long-term basis (mental health follow-up, supported employment program, legal or social advice).

Validated spectrofluorometric method for determination of gemfibrozil in self nanoemulsifying drug delivery systems (SNEDDS)

A spectrofluorometric method has been developed and validated for the determination of gemfibrozil. The method is based on the excitation and emission capacities of gemfibrozil with excitation and emission wavelengths of 276 and 304 nm respectively. This method allows de determination of the drug in a self-nanoemulsifying drug delivery system (SNEDDS) for improve its intestinal absorption. Results obtained showed linear relationships with good correlation coefficients (r(2)>0.999) and low limits of detection and quantification (LOD of 0.075 μg mL(-1) and LOQ of 0.226 μg mL(-1)) in the range of 0.2-5 μg mL(-1), equally this method showed a good robustness and stability. Thus the amounts of gemfibrozil released from SNEDDS contained in gastro resistant hard gelatine capsules were analysed, and release studies could be performed satisfactorily.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.

Narri-kissa

Soitinnus: lauluäänet (2).

Análisis de viabilidad técnica-económica del parque eólico Altos de Peralta

RESUMEN La energia eolica se considera una forma indirecta de energia solar. Entre el 1 y 2% de la energia proveniente del sol se convierte en viento, debido al movimiento del aire ocasionado por el desigual calentamiento de la superficie terrestre. La energia cinetica del viento puede transformarse en energia util, tanto mecanica como electrica. La energia eolica, transformada en energia mecanica ha sido historicamente aprovechada, pero su uso para la generacion de energia electrica es mas reciente, en respuesta a la crisis del petroleo y a los impactos ambientales derivados del uso de combustibles. El objetivo principal de este trabajo es hacer un analisis de viabilidad desde un punto de vista tecnico y economico de un parque eolico situado en el municipio de Barasoain (Navarra). Desde el punto de vista tecnico se han estudiado los aspectos constructivos del parque considerando sus diferentes infraestructuras de obra civil y electrica asi como los niveles de recurso eolico. En el ambito economico y financiero se han analizado los aspectos y ratios mas relevantes que definen un proyecto de estas caracteristicas asi como el modelo de financiacion elegida basada en el Project- Finance. Entre las conclusiones mas destacadas de este proyecto cabe destacar la contribucion de la construccion del parque al desarrollo social y economico de la zona donde queda ubicado contribuyendo a la creacion de puestos de trabajo, tanto en la fase de construccion como de explotacion y una perfecta armonia con condicionantes medioambientales de la zona. El analisis tecnico realizado nos indica la viabilidad tecnica del parque tanto desde el punto de vista de recurso eolico como la idoneidad para poder evacuar la energia producida. Por otro lado, los resultados obtenidos cumplen perfectamente con los estandares requeridos por los financiadores de los parques y resultando ser muy atractivos para sus accionistas

Validação de métodos para determinação de fluoxetina em cápsulas

A UV spectrophotometric method was developed and validated and a chromatographic method was adapted from the American Pharmacopeia for the analysis of Fluoxetine Hydrochloride capsules. Ethanol was used as solvent for the spectrophotometric method, with detection and determination at 276 nm. The separation for the chromatographic method was carried out using the reversed-phase column LC-8, triethylamine buffer, stabilizer free tetrahydrofuran and methanol (5:3.5:1.5), pH 6.0 as mobile phase and detection at 227 nm. The results obtained for both methods showed to be accurate, precise, robust and linear over the concentration range 100.00 - 300.00 µg/mL and 40.00 - 80.00 µg/mL of fluoxetine hydrochloride for the spectrophotometric and chromatographic methods, respectively. The accuracy of the methods was evaluated by a recovery test and showed results between 98.89 and 101.10%.

Estudo químico e biológico de Tephrosia toxicaria Pers.

The ethanol extracts from leaves, stems, pods and roots were assayed against the 3rd instar Aedes aegypti larvae and the highest activity was observed in the roots extracts (LC50 47.86 ppm). This extract was submitted to partition with hexane, chloroform, ethyl acetate and methanol. The respective fractions were bioassayed and the best larvicidal activities were identified in the hexane (LC50 23.99 ppm) and chloroform (LC50 13.80 ppm) fractions. Antioxidant activity (DDPH method) was observed in the ethanol extract (IC50 276 µg/mL) from roots of T. toxicaria. Fractions from this extract were also tested and the highest antioxidant activity (IC50 89 µg/mL) was found in the methanol fraction. The flavonoids iso-obovatin (1), obovatin (2), 6a,12a-dehydro-β-toxicarol (3), 6a,12a-dehydro-α-toxicarol (4) and α-toxicarol (5) were isolated and bioassayed against A. aegypti. The flavonoid 5 showed the best larvicidal activity (LC50 24.55 ppm). The antioxidant activity of 2 was investigated and showed IC50 3.370 µg/mL. The antioxidant and larvicidal activities of Tephrosia toxicaria are reported for the first time.

Le Constitutionnel : journal politique et littéraire

1816/10/02 (Numéro 276).

An felicitas reipublicae ex multitudine civium praecipue sit aestimanda?

Invocatio: I.N.J.C.

Characterization of the antibiotic doripenem using physicochemical methods: chromatography, spectrophotometry, spectroscopy and thermal analysis

Doripenem was characterized through physicochemical and spectroscopic techniques, as well as thermal analysis. TLC (Rf = 0.62) and HPLC (rt = 7.4 min) were found to be adequate to identify the drug. UV and infrared spectra showed similar profile between doripenem bulk and standard. The ¹H and 13C NMR analysis revealed chemical shifts that allowed identifying the drug. Thermal analysis demonstrated three steps with mass loss, at 128, 178 and 276 ºC. The work was successfully applied to qualitative analysis of doripenem, showing the reported methods can be used for physicochemical characterization of doripenem

Biochemical characterisation of lipase from a new strain of Bacillus sp. ITP-001

Lipases are characterised mainly by catalytic versatility and application in different industrial segments. The aim of this study was to biochemically characterise a lipase from a new strain of Bacillus sp. ITP-001. The isoelectric point and molecular mass were 3.12 and 54 kDa, respectively. The optima lipase activity was 276 U g-1 at pH 7.0 and a temperature of 80 ºC, showing greater stability at pH 5.0 and 37 ºC. Enzymatic activity was stimulated by various ions and pyridine, and inhibited by Cu+ and ethanol. The values of Km and v max were 105.26 mmol and 0.116 mmol min-1 g-1, respectively determined by the Eadie-Scatchard method.

Detecção e caracterização biológica e molecular de Rupestris stem-pitting associated virus e seu efeito na fotossíntese de videiras

Rupestris stem pitting associated virus (RSPaV) é o agente causal das "caneluras do tronco de Rupestris" da videira (Vitis spp.). Neste trabalho, um isolado de RSPaV, encontrado em videiras cv. Cabernet Franc no Rio Grande do Sul, foi estudado. O vírus foi detectado biologicamente, por enxertia em videira indicadora cv. Rupestris du Lot, em 26,2% das amostras avaliadas. A seqüência parcial do gene da replicase do RSPaV, isolado sul-brasileiro, com 831 nucleotídeos amplificados por RT-PCR e 276 aminoácidos deduzidos, apresentou maior identidade de nucleotídeos (98,1%) e aminoácidos deduzidos (99,6%), com dois isolados norte-americanos. O RSPaV estudado apresentou baixa homologia (37-41%) com outros vírus do gênero Foveavirus. A maioria das mudas de videira cv. C. Franc infetadas com RSPaV apresentou diminuição no potencial fotossintético (2,68 a 5,12 vezes) e aumento na taxa respiratória no escuro quando comparadas a mudas sadias, salientando os impactos que esse vírus pode proporcionar no potencial produtivo de videiras.