Electroanalysis and determination of acetaldehyde in fuel ethanol using the reaction with 2,4-dinitrophenylhydrazine

The voltammetric reduction of acetaldehyde was studied in 0.1 M LiOH: LiCl (60: 40 v/v). Welldefined waves can be seen at -1.77 and -1.60 V with the use of hanging mercury and glassy carbon electrodes. Acetaldehyde was shown to react at room temperature with the 2,4-dinitrophenylhydrazine and the product exhibited a differential pulse voltammetric peak at -0.90V, which was well separated from the peaks of the derivative. This allowed the indirect determination of acetaldehyde in the presence of 0.1 M ethanol/tetrabutylammonium perchlorate after 10 min of reaction. Calibration graphs were obtained for 1.00 x 10(-6)-1.00 x 10(-4) M of acetaldehyde. The detection limit is 8.14 x 10(-7) M. The method has been applied satisfactorily to the determination of total aldehyde in fuel ethanol samples without any pretreatment.

Structure characterization of molecular complexes for non-linear optical materials. II. 1 : 1 complexes of 4-methyl-morpholine-N-oxide (1) and 3-picoline-N-oxide (2) with 2,4,6-trinitrophenol, studied by X-ray, AM1 and DFT calculations

(1) C6H2N3O7- center dot C5H12NO2+, Mr = 346.26, P2(1)/c, a = 7.2356(6), b = 10.5765(9), c = 19.593(2) angstrom, 3 beta=95.101(6)degrees, V = 1493.5(2) angstrom(3), Z = 4, R-1 = 0.0414; (2) C6H2N3O7- center dot C6H8NO+, Mr = 38.24, P2(1)/n, a = 7.8713(5), b = 6.1979(7), c = 28.697(3) angstrom, beta = 90.028(7)degrees, V = 1400.0(2) angstrom(3), Z = 4, R-1 = 0.0416. The packing units in both compounds consist of hydrogen bonded cation-anion pairs. The (hyper)polarizabilities have been calculated for the crystallographic and optimized molecules, by AM1 and at the DFT/B3LYP(6-31G**) level.

Photodegradation of dichloroacetic acid and 2,4-dichlorophenol by ferrioxalate/H2O2 system

The photo-Fenton process using potassium ferrioxalate as a mediator in the photodegradation reaction of organochloride compounds in an aqueous medium was investigated. The influence of parameters such as hydrogen peroxide and ferrioxalate concentrations and initial pH, was evaluated using dichloroacetic acid (DCA) as a model compound under black-light lamp irradiation. An upflow annular photoreactor, operating in a single pass or recirculating mode was used during photodegradation experiments with artificial light. The extent of the release of chloride ions was used to evaluate the photodegradation reaction. The optimum pH range observed was 2.5-2.8. The efficiency of DCA dechlorination increased with increasing concentrations of H2O2 and potassium ferrioxalate, reaching a plateau after the addition of 6 and 1.5 mmol/L of those reagents, respectively. The total organic carbon (TOC) content in DCA and 2,4-dichlorophenol (DCP) solutions was compared with the chloride released after photodegradation. The influence of natural solar light intensity, measured at 365 nm, was evaluated for the dechlorination of DCA on typical summer's days showing a linear dependency. The photodegradation of DCA using black-light lamp and solar irradiation was compared.

Solar photodegradation of dichloroacetic acid and 2,4-dichlorophenol using an enhanced photo-Fenton process

The photo-Fenton process using potassium ferrioxalate as a mediator was investigated for the photodegradation of dichloracetic acid (DCA) and 2,4-dichlorophenol (DCP) in aqueous medium using solar light as source of irradiation. The influence of the solution depth, the light intensity and the effect of stirring the solution during irradiation process were evaluated using DCA as a model compound. A negligible influence of stirring the solution was observed when the concentration of ferrioxalate (FeOx) was 0.8 mM and solution depth was 4.5 or 14 cm. The optimum FeOx concentration determined for solution depths between 4.5 and 14 cm was 0.8 mM considering total organic carbon (TOC) removal during DCA irradiation. The high efficiency of the photo-Fenton process was demonstrated on summer days, when only 10 min of exposition (around noon) were sufficient to completely destroy the organic carbon of a 1.0 mM DCA solution in the presence of 0.8 mM FeOx and 6.0 mM H2O2 using a solution depth of 4.5 cm. It was observed that the photodegradation efficiency increases linearly with the solar light intensity up to values around 15 Wm-2 but this linear relationship does not hold above this value showing a square root dependence. The photodegradation of a solution of DCP/FeOx showed a lower TOC removal rate than that observed for DCA/FeOx, achieving ∼90% after 35 min irradiation under 19 Wm-2, while under this light intensity, the same TOC removal of DCA/FeOx was achieved in only 10 min irradiation. © 2002 Elsevier Science Ltd. All rights reserved.

Inoculation of salivary gland extracts obtained from female of Rhipicephalus sanguineus (Latreille, 1806) (Acari, Ixodidae) with 2, 4, and 6 days of feeding in rabbit: I - Histopathology of the feeding lesion

This study analyzed the histopathology of rabbit skin, previously immunized with SGE2, SGE4, and SGE6 gland extracts prepared from salivary glands of Rhipicephalus sanguineus female with 2, 4, and 6 days of feeding, at the region of the R. sanguineus female feeding lesion 2, 4, and 6 days after tick attachment. In this work, infestation-naïve New Zealand White rabbits were inoculated either with the extracts (test group (TG)) or with phosphate buffer and complete Freund's adjuvant mixture (control group 2 (CG2)). Each extract-inoculated- (TG and CG2) and non-inoculated (CG1) rabbit was subsequently infested with R. sanguineus. Skin biopsies were collected from the rabbit at the tick feeding lesion at 2, 4, and 6 days of feeding. Results revealed that rabbit immunization with gland extracts induced acquisition of resistance against this species. It should be stated that the SGE4 extract was the most effective in developing an immune-inflammatory response against ectoparasites, being this process characterized by the presence of an early and intense inflammatory cell infiltrate. On the other hand, SGE6 extract caused a later appearance of resistance with less infiltrate occurrence and intense edema at the feeding lesion site. As to the inflammatory process deriving from SGE2 extract inoculation, it was the less intense. It was concluded that immunization with different extracts from R. sanguineus female salivary glands did not change microscope features of the inflammatory process, although an earlier or more intense and later response, which was also dependent on the inoculate extract, was noticed. © 2012 Springer-Verlag Berlin Heidelberg.

A new hybrid polyhedral cubic silsesquioxane chemically modified with 4-amino-5-(4-pyridyl)-4H-1,2,4-triazole-3-thiol (APTT) and copper hexacyanoferrate(III) for voltammetric determination of nitrite

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gene expression and protein localization of TLR-1, -2, -4 and -6 in amniochorion membranes of pregnancies complicated by histologic chorioamnionitis

Objectives: To determine whether histologic chorioamnionitis is associated with changes in gene expression of TLR-1, -2, -4 and -6, and to describe the localization of these receptors in fetal membranes. Study design: A total of 135 amniochorion membranes with or without histologic chorioamnionitis from preterm or term deliveries were included. Fragments of membranes were submitted to total RNA extraction. RNA was reverse transcribed and the quantification of TLRs expression measured by real time PCR. Results: All amniochorion membranes expressed TLR-1 and TLR-4, whereas 99.1% of membranes expressed TLR-2 and 77.4% expressed TLR-6. TLR-1 and TLR-2 expressions were significantly higher in membranes with histologic chorioamnionitis as compared to membranes without chorioamnionitis in preterm pregnancies (p = 0.003 and p < 0.001, respectively). Among the membranes of term pregnancies there were no differences in the expressions of such receptors regardless of inflammatory status. Regarding TLR-4 and TLR-6 expression, there was no difference among membranes with or without histologic chorioamnionitis, regardless gestational age at delivery. TLR-1, TLR-2, TLR-4 and TLR-6 expressions were observed in amniotic epithelial, chorionic and decidual cells. Conclusion: Amniochorion membranes express TLR-1, TLR-2, TLR-4 and TLR-6 and increased expression of TLR-1 and TLR-2 is related to the presence of histologic chorioamnionitis in preterm pregnancies. This study provides further evidence that amniochorion membranes act as a mechanical barrier to microorganisms and as components of the innate immune system. © 2013 Elsevier B.V. All rights reserved.

Teorias duais massivas de spin-2 em D=2+1 via ação mestra e imersão de Noether

Pós-graduação em Física - FEG

Expressão e localização de receptores Toll-like -1, -2, -4 e -6 em membranas corioamnióticas de gestações complicadas por corioamnionite histológica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Gravitação quadrática em (2 + 1)D com e sem termo topológico de Chern-Simons

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelo de propagação indoor multi-andar em 2.4 GHz com estimativa de parâmetros de QoS em chamadas VoIP

O advento de novas formas multimídia tem atraído uma clientela exigente, onde preocupação não é somente com o serviço, mas também, com a qualidade que esse serviço pode ser oferecido. As WLAN (Wireless Local Area Networks) tornaram-se a forma mais comum de roteamento de Internet, devido ao seu baixo custo e facilidade de implementação. Para realizar um bom roteamento é necessário um planejamento, utilizando-se modelos. Os modelos de propagação existentes na literatura fazem a predição da intensidade do sinal, mas algumas vezes não contemplam a previsão de um bom serviço. Nesse sentido a presente dissertação propõe-se a elaborar um modelo de propagação empírico indoor multi-andar que não só prediz a potência recebida, mas também faz uma previsão para algumas métricas de QoS (Quality of Service) de chamadas VoIP (Voice over Internet Protocol). Para a elaboração do modelo proposto foram feitas campanhas de medição, em um prédio de dois andares, em pisos distintos mantendo-se a posição do ponto de acesso (PA) fixa. Estudos de geometria analítica para a contagem e agregação de perdas em pisos e paredes. Os resultados do modelo proposto foram comparados com um modelo da literatura que tem um comportamento similar, onde é possível verificar o melhor desempenho do modelo proposto, e para efeito de estudo um andar completamente simulado foi introduzido para avaliação.

Migração (2,5-D) com amplitudes verdadeiras em meios com gradiente constante de velocidade

A migração com amplitudes verdadeiras de dados de reflexão sísmica, em profundidade ou em tempo, possibilita que seja obtida uma medida dos coeficientes de reflexão dos chamados eventos de reflexão primária. Estes eventos são constituídos, por exemplo, pelas reflexões de ondas longitudinais P-P em refletores de curvaturas arbitrárias e suaves. Um dos métodos mais conhecido é o chamado migração de Kirchhoff, através do qual a imagem sísmica é produzida pela integração do campo de ondas sísmicas, utilizando-se superfícies de difrações, denominadas de Superfícies de Huygens. A fim de se obter uma estimativa dos coeficientes de reflexão durante a migração, isto é a correção do efeito do espalhamento geométrico, utiliza-se uma função peso no operador integral de migração. A obtenção desta função peso é feita pela solução assintótica da integral em pontos estacionários. Tanto no cálculo dos tempos de trânsito como na determinação da função peso, necessita-se do traçamento de raios, o que torna a migração em situações de forte heterogeneidade da propriedade física um processo com alto custo computacional. Neste trabalho é apresentado um algoritmo de migração em profundidade com amplitudes verdadeiras, para o caso em que se tem uma fonte sísmica pontual, sendo o modelo de velocidades em subsuperfície representado por uma função que varia em duas dimensões, e constante na terceira dimensão. Esta situação, conhecida como modelo dois-e-meio dimensional (2,5-D), possui características típicas de muitas situações de interesse na exploração do petróleo, como é o caso da aquisição de dados sísmicos 2-D com receptores ao longo de uma linha sísmica e fonte sísmica 3-D. Em particular, é dada ênfase ao caso em que a velocidade de propagação da onda sísmica varia linearmente com a profundidade. Outro tópico de grande importância abordado nesse trabalho diz respeito ao método de inversão sísmica denominado empilhamento duplo de difrações. Através do quociente de dois empilhamentos com pesos apropriados, pode-se determinar propriedades físicas e parâmetros geométricos relacionados com a trajetória do raio refletido, os quais podem ser utilizados a posteriori no processamento dos dados sísmicos, visando por exemplo, a análise de amplitudes.