Pesquisa aplicada em comunicação: uma tendência necessária

The history of communication as a science was marked by different moments. The first one was built by technological experimentation and later, by language transformation. But the consolidation of communication as applied social science has come from theoretical research, when Lasswell and Lazarsfeld respectively proposed the hypodermic and the two-step flow theories. However, applied research – which involves experimentation and its observation in a practical application process – is once again being targeted by the academy. This text develops an essay on the importance of applied research to the development of contemporary communication, presenting examples and methods related to such reality.

alpha-6 Integrin Expression in Bovine Spermatogonial Cells Purified by Discontinuous Percoll Density Gradient

The study of spermatogonial stem cells (SSCs) provides a model to better understand adult stem cell biology. Besides the biomedical potential to perform studies of infertility in many species, SSCs hold a promising application at animal transgenesis. Because stem cells are thought to be associated with basement membranes, expression of alpha-6 integrin has been investigated as a marker of type A spermatogonial cells, which are considered SSCs because of their undifferentiated status and self-renewal ability. In this manner, the aim of this study was to isolate type A SSCs from adult bulls by a two-step enzymatic procedure followed by a discontinuous Percoll density gradient purification and verify the expression of alpha-6 integrin by flow cytometry and real-time RT-PCR before and after Percoll purification. Spermatogonial cells were successfully obtained using the two-step enzymatic digestion. An average of 1 x 10(5) viable cells per gram of testis was isolated. However, the discontinuous Percoll did not purify isolated cells regarding alpha-6 integrin expression. Flow cytometry analysis demonstrated no differences in the alpha-6 integrin expression between cell samples before and after Percoll purification (p = 0.5636). The same was observed in the real-time PCR analysis (p > 0.05). In addition to alpha-6 integrin, the expression of GFR alpha-1 and PGP9.5, known bovine SSCs markers, was detected in all samples studied. Considering that Percoll can reduce cell viability, it is possible to conclude that Percoll density gradient is not suitable to purify bovine SSC, according to alpha-6 integrin expression.

Influence of Ozone Gas and Ozonated Water Application to Dentin and Bonded Interfaces on Resin-Dentin Bond Strength

Purpose: To assess the influence of ozone gas and ozonated water application to prepared cavity and bonded interfaces on the resin/dentin bond strength of two-step etch-and-rinse adhesive systems (Adper Single Bond 2 [SB2] and XP-Bond [XP]). Materials and Methods: Sixty extracted human third molars were sectioned perpendicularly to their long axes to expose flat occlusal dentin surfaces. In experiment 1, dentin was treated with ozone before the bonding procedure, while in experiment 2, ozone was applied to resin/dentin bonded interfaces. In experiment 1, dentin surfaces were treated either with ozone gas (2100 ppm), ozonated water (3.5 ppm), or distilled water for 120 s, and then bonded with SB2 or XP according to manufacturers' instructions. Hybrid composite buildups were incrementally constructed and the teeth were sectioned into resin-dentin sticks (0.8 mm(2)). In experiment 2, dentin surfaces were first bonded with SB2 or XP, composite buildups were constructed, and bonded sticks obtained. The sticks were treated with ozone as previously described. Bonded sticks were tested under tensile stress at 1 mm/min. Silver nitrate impregnation along the resin/dentin interfaces was also evaluated under SEM. Results: Two-way ANOVA (adhesive and ozone treatment) detected no significant effect for the cross-product interaction and the main factors in the two experiments (p > 0.05), which was confirmed by the photomicrographs. Conclusion: Ozone gas and ozonated water used before the bonding procedure or on resin/dentin bonded interfaces have no deleterious effects on the bond strengths and interfaces.

Experimental Adhesives with Different Hydrophilicity: Microshear Test in after 1, 7, and 90 Days' Storage

Purpose: To assess the microshear bond strength of 3 experimental adhesives with different degrees of hydrophilicity after 1, 7 and 90 days of storage. Materials and Methods: The bonding effectiveness of three experimental two-step etch-and-rinse adhesives (bis-GMA, bis-EMA/bis-GMA, polybutadiene [C6H12]) and one commercial adhesive (Single Bond) to sound hydrated dentin was determined using the nnicroshear test with delimitation of the adhesive area after 1, 7, and 90 days of storage in water at 37 degrees C. Two-way ANOVA was performed at the 0.05 probability level. The fractures were classified as adhesive, cohesive in dentin, cohesive in resin, and mixed. Results: The experimental adhesives showed values in the range of 11.31 to 12.96 MPa, with polybutadiene (PBH) showing the lowest bond strengths, bis-GMA the highest, and bis-EMA/bis-GMA intermediary values. Single Bond yielded bond strengths of approximately 24 MPa. Water storage decreased the bond strength in all adhesives. Adhesive fractures were predominant in experimental adhesives, while mixed fractures were the most frequent type in the Single Bond group. Conclusion: The experimental dentin adhesives of this study were able to form resin tags, but they could not penetrate into the collagen fibers and form hybrid layers. The resulting low bond strength decreased with increasing length of storage.

Calibration of a Species-Specific Spectral Vegetation Index for Leaf Area Index (LAI) Monitoring: Example with MODIS Reflectance Time-Series on Eucalyptus Plantations

The leaf area index (LAI) is a key characteristic of forest ecosystems. Estimations of LAI from satellite images generally rely on spectral vegetation indices (SVIs) or radiative transfer model (RTM) inversions. We have developed a new and precise method suitable for practical application, consisting of building a species-specific SVI that is best-suited to both sensor and vegetation characteristics. Such an SVI requires calibration on a large number of representative vegetation conditions. We developed a two-step approach: (1) estimation of LAI on a subset of satellite data through RTM inversion; and (2) the calibration of a vegetation index on these estimated LAI. We applied this methodology to Eucalyptus plantations which have highly variable LAI in time and space. Previous results showed that an RTM inversion of Moderate Resolution Imaging Spectroradiometer (MODIS) near-infrared and red reflectance allowed good retrieval performance (R-2 = 0.80, RMSE = 0.41), but was computationally difficult. Here, the RTM results were used to calibrate a dedicated vegetation index (called "EucVI") which gave similar LAI retrieval results but in a simpler way. The R-2 of the regression between measured and EucVI-simulated LAI values on a validation dataset was 0.68, and the RMSE was 0.49. The additional use of stand age and day of year in the SVI equation slightly increased the performance of the index (R-2 = 0.77 and RMSE = 0.41). This simple index opens the way to an easily applicable retrieval of Eucalyptus LAI from MODIS data, which could be used in an operational way.

Vitrification of primordial germ cells using whole embryos for gene-banking in loach, Misgurnus anguillicaudatus

In gene-banking, primordial germ cells (PGCs), which are embryonic precursor cells of germ cells, are useful for cryopreservation because PGCs have a potential to differentiate into both eggs and sperm via germ-line chimera. Here, we have established vitrification methods for PGCs cryopreservation using 12- to 17-somite stage embryos in loach, Misgurnus anguillicaudatus, which were dechorionated, removed their yolk and injected with green fluorescent protein (GFP) -nos1 3'UTR mRNA to visualize their PGCs. In order to optimize cryopreservation medium for vitrification, the toxicity of cryoprotectants was analyzed. Different concentrations (2, 3, 4, 5 m) of dimethyl sulfoxide (DMSO), methanol (MeOH), ethylene glycol (EG) and propylene glycol (PG) as cryoprotectants were tested. Then, 5 m DMSO showed significantly-high toxicity. Based on this information, combinations called DMP (2 m (14.2% [v/v]) DMSO, 2 m (8.1% [v/v]) MeOH and 2 m (14.4% [v/v]) PG), DP (2 m (14.2% [v/v]) DMSO and 4 m (28.7% [v/v]) PG) and DE (2.1 m (15% [v/v]) DMSO and 2.7 m (15% [v/v]) EG) were evaluated for their toxicities and efficacy of PGCs cryopreservation using two types of equilibration step: direct immersion of cryopreservation media (one-step) and serial exposure to half and full concentration of cryopreservation media (two-step). Viable PGCs were obtained from post-thaw embryos which were cryopreserved by DP and DE with both 1- and 2-step equilibrations. Despite DP showing the highest toxicity, it gave the highest survival rate of embryonic cells after cryopreservation. When PGCs recovered from vitrified embryos were transplanted into host embryos at the blastula stage, the transplanted PGCs were able to migrate to a host genital ridge similarly as endogenous PGCs. It suggests that our methods could be useful to create a germ-line chimera for the production of gametes from PGCs of cryopreserved embryos.

The presence of a booster phenomenon among contacts of active pulmonary tuberculosis cases: a retrospective cohort

Abstract Background Assuming a higher risk of latent tuberculosis (TB) infection in the population of Rio de Janeiro, Brazil, in October of 1998 the TB Control Program of Clementino Fraga Filho Hospital (CFFH) routinely started to recommend a two-step tuberculin skin test (TST) in contacts of pulmonary TB cases in order to distinguish a boosting reaction due to a recall of delayed hypersensitivity previously established by infection with Mycobacterium tuberculosis (M.tb) or BCG vaccination from a tuberculin conversion. The aim of this study was to assess the prevalence of boosted tuberculin skin tests among contacts of individuals with active pulmonary tuberculosis (TB). Methods Retrospective cohort of TB contacts ≥ 12 years old who were evaluated between October 1st, 1998 and October 31st 2001. Contacts with an initial TST ≤ 4 mm were considered negative and had a second TST applied after 7–14 days. Boosting reaction was defined as a second TST ≥ 10 mm with an increase in induration ≥ 6 mm related to the first TST. All contacts with either a positive initial or repeat TST had a chest x-ray to rule out active TB disease, and initially positive contacts were offered isoniazid preventive therapy. Contacts that boosted did not receive treatment for latent TB infection and were followed for 24 months to monitor the development of TB. Statistical analysis of dichotomous variables was performed using Chi-square test. Differences were considered significant at a p < 0.05. Results Fifty four percent (572/1060) of contacts had an initial negative TST and 79% of them (455/572) had a second TST. Boosting was identified in 6% (28/455). The mean age of contacts with a boosting reaction was 42.3 ± 21.1 and with no boosting was 28.7 ± 21.7 (p = 0.01). Fifty percent (14/28) of individuals whose test boosted met criteria for TST conversion on the second TST (increase in induration ≥ 10 mm). None of the 28 contacts whose reaction boosted developed TB disease within two years following the TST. Conclusion The low number of contacts with boosting and the difficulty in distinguishing boosting from TST conversion in the second TST suggests that the strategy of two-step TST testing among contacts of active TB cases may not be useful. However, this conclusion must be taken with caution because of the small number of subjects followed.

Chemical and morphological characterization of sugarcane bagasse submitted to a delignification process for enhanced enzymatic digestibility

Abstract Background In recent years, biorefining of lignocellulosic biomass to produce multi-products such as ethanol and other biomaterials has become a dynamic research area. Pretreatment technologies that fractionate sugarcane bagasse are essential for the successful use of this feedstock in ethanol production. In this paper, we investigate modifications in the morphology and chemical composition of sugarcane bagasse submitted to a two-step treatment, using diluted acid followed by a delignification process with increasing sodium hydroxide concentrations. Detailed chemical and morphological characterization of the samples after each pretreatment condition, studied by high performance liquid chromatography, solid-state nuclear magnetic resonance, diffuse reflectance Fourier transformed infrared spectroscopy and scanning electron microscopy, is reported, together with sample crystallinity and enzymatic digestibility. Results Chemical composition analysis performed on samples obtained after different pretreatment conditions showed that up to 96% and 85% of hemicellulose and lignin fractions, respectively, were removed by this two-step method when sodium hydroxide concentrations of 1% (m/v) or higher were used. The efficient lignin removal resulted in an enhanced hydrolysis yield reaching values around 100%. Considering the cellulose loss due to the pretreatment (maximum of 30%, depending on the process), the total cellulose conversion increases significantly from 22.0% (value for the untreated bagasse) to 72.4%. The delignification process, with consequent increase in the cellulose to lignin ratio, is also clearly observed by nuclear magnetic resonance and diffuse reflectance Fourier transformed infrared spectroscopy experiments. We also demonstrated that the morphological changes contributing to this remarkable improvement occur as a consequence of lignin removal from the sample. Bagasse unstructuring is favored by the loss of cohesion between neighboring cell walls, as well as by changes in the inner cell wall structure, such as damaging, hole formation and loss of mechanical resistance, facilitating liquid and enzyme access to crystalline cellulose. Conclusions The results presented herewith show the efficiency of the proposed method for improving the enzymatic digestibility of sugarcane bagasse and provide understanding of the pretreatment action mechanism. Combining the different techniques applied in this work warranted thorough information about the undergoing morphological and chemical changes and was an efficient approach to understand the morphological effects resulting from sample delignification and its influence on the enhanced hydrolysis results.

Effects of pretreatment on morphology, chemical composition and enzymatic digestibility of eucalyptus bark: a potentially valuable source of fermentable sugars for biofuel production – part 1

Abstract Background In recent years, the growing demand for biofuels has encouraged the search for different sources of underutilized lignocellulosic feedstocks that are available in sufficient abundance to be used for sustainable biofuel production. Much attention has been focused on biomass from grass. However, large amounts of timber residues such as eucalyptus bark are available and represent a potential source for conversion to bioethanol. In the present paper, we investigate the effects of a delignification process with increasing sodium hydroxide concentrations, preceded or not by diluted acid, on the bark of two eucalyptus clones: Eucalyptus grandis (EG) and the hybrid, E. grandis x urophylla (HGU). The enzymatic digestibility and total cellulose conversion were measured, along with the effect on the composition of the solid and the liquor fractions. Barks were also assessed using Fourier-transform infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (NMR), X-Ray diffraction, and scanning electron microscopy (SEM). Results Compositional analysis revealed an increase in the cellulose content, reaching around 81% and 76% of glucose for HGU and EG, respectively, using a two-step treatment with HCl 1%, followed by 4% NaOH. Lignin removal was 84% (HGU) and 79% (EG), while the hemicellulose removal was 95% and 97% for HGU and EG, respectively. However, when we applied a one-step treatment, with 4% NaOH, higher hydrolysis efficiencies were found after 48 h for both clones, reaching almost 100% for HGU and 80% for EG, in spite of the lower lignin and hemicellulose removal. Total cellulose conversion increased from 5% and 7% to around 65% for HGU and 59% for EG. NMR and FTIR provided important insight into the lignin and hemicellulose removal and SEM studies shed light on the cell-wall unstructuring after pretreatment and lignin migration and precipitation on the fibers surface, which explain the different hydrolysis rates found for the clones. Conclusion Our results show that the single step alkaline pretreatment improves the enzymatic digestibility of Eucalyptus bark. Furthermore, the chemical and physical methods combined in this study provide a better comprehension of the pretreatment effects on cell-wall and the factors that influence enzymatic digestibility of this forest residue.

A new approach for modeling and control of nonlinear systems via norm-bounded linear differential inclusions

A systematic approach to model nonlinear systems using norm-bounded linear differential inclusions (NLDIs) is proposed in this paper. The resulting NLDI model is suitable for the application of linear control design techniques and, therefore, it is possible to fulfill certain specifications for the underlying nonlinear system, within an operating region of interest in the state-space, using a linear controller designed for this NLDI model. Hence, a procedure to design a dynamic output feedback controller for the NLDI model is also proposed in this paper. One of the main contributions of the proposed modeling and control approach is the use of the mean-value theorem to represent the nonlinear system by a linear parameter-varying model, which is then mapped into a polytopic linear differential inclusion (PLDI) within the region of interest. To avoid the combinatorial problem that is inherent of polytopic models for medium- and large-sized systems, the PLDI is transformed into an NLDI, and the whole process is carried out ensuring that all trajectories of the underlying nonlinear system are also trajectories of the resulting NLDI within the operating region of interest. Furthermore, it is also possible to choose a particular structure for the NLDI parameters to reduce the conservatism in the representation of the nonlinear system by the NLDI model, and this feature is also one important contribution of this paper. Once the NLDI representation of the nonlinear system is obtained, the paper proposes the application of a linear control design method to this representation. The design is based on quadratic Lyapunov functions and formulated as search problem over a set of bilinear matrix inequalities (BMIs), which is solved using a two-step separation procedure that maps the BMIs into a set of corresponding linear matrix inequalities. Two numerical examples are given to demonstrate the effectiveness of the proposed approach.

The star formation rate in the inner Milky Way Galaxy

The present star formation rate (SFR) in the inner Galaxy is puzzling for the chemical evolution models (CEM). No static CEM is able to reproduce the peak of the SFR in the 4 kpc ring. The main reason is probably a shortage of gas, which could be due to the dynamical effects produced by the galactic bar, not considered by these models. We developed a CEM that includes radial gas flows in order to mimic the effects of the galactic bar in the first 5 kpc of the galactic disk. In this model, the star formation (SF) is a two-step process: first, the diffuse gas forms molecular clouds. Then, stars form from cloud-cloud collisions or by the interaction between massive stars and the molecular gas. The former is called spontaneous and the latter induced SF. The mass in the different phases of each region changes by the processes associated with the stellar formation and death by: the SF due to spontaneous fragmentation of gas in the halo; formation of gas clouds in the disk from the diffuse gas; induced SF in the disk due to the interaction between massive stars and gas clouds; and finally, the restitution of the diffuse gas associated to these process of cloud and star formation. In the halo, the star formation rate for the diffuse gas follows a Schmidt law with a power n = 1.5. In the disk, the stars form in two steps: first, molecular clouds are formed from the diffuse gas also following a Schmidt law with n=1.5 and a proportionality factor. Including a specific pattern of radial gas flows, the CEM is able to reproduce with success the peak in the SFR at 4 kpc (fig. 1).

Facets of Gender : Analyses of the Family and the Labour Market

This thesis contains four different studies on the dynamics of gender in households and workplaces. The relationship between family life and work life is in focus, particularly in the paper on labour market outcomes after divorce. In the introductory chapter, the Swedish context is briefly described. The description focuses on gender differences in the labour market and in the home. Theories concerning the division of work in the household are discussed, as are two theories on labour market discrimination, viz. taste discrimination and statistical discrimination. The theory part is concluded with a discussion of social closure processes and gendered organizational structures. The Reproduction of Gender. Housework and Attitudes Towards Gender Equality in the Home Among Swedish Boys and Girls. The housework boys and girls age 10 to 18 do, and their attitudes towards gender equality in the home are studied. One aim is to see whether the work children do is gendered and if so, whether they follow their parents’, often gendered, pattern in housework. A second aim is to see whether parents’ division of work is related to the children’s attitude towards gender equality in the home. The data used are taken from the Swedish Child Level of Living Survey (Child-LNU) 2000. Results indicate that girls and boys in two-parent families are more prone to engage in gender-atypical work the more their parent of the same sex engages in this kind of work. The fact that girls still do more housework than boys indicates that housework is gendered work also among children. No relation between parents’ division of work and the child’s attitude towards gender equality in the home was found. Dependence within Families and the Household Division of Labor – A Comparison between Sweden and the United States. This paper assesses the relative explanatory value of the resource-bargaining perspective and the doing-gender approach in analysing the division of housework in the United States and Sweden from the mid-1970s to 2000. Data from the Swedish Level of Living Survey (LNU) and the Panel Study of Income Dynamics (PSID) were used. Overall results indicate that housework is truly gendered work in both countries during the entire period. Even so, the results also indicate that gender deviance neutralization is more pronounced in the United States than in Sweden. Unlike Swedish women, American women seem to increase their time spent in housework when their husbands are to some extent economically dependent on them, as if to neutralize the presumed gender deviance. Divorce and Labour Market Outcomes. Do Women Suffer or Gain? In this paper, the interconnected nature of work and family is studied by looking at labour market outcomes after divorce. The data used are retrospective work and family histories collected in LNU 1991. A hazard regression model with competing risks reveals that women’s chances of improving their occupational prestige appear to be better after divorce compared to before. Increased working hours and perhaps also increased energy invested in the job may pay off in better occupational opportunities. Worth noting, however, is that the outcome among women with a less firm labour market attachment is more often to a job of lower prestige than one of higher prestige. Hence, the labour market outcome for women after divorce is to some extent conditioned by their labour market attachment at the time of divorce. Men, on the other hand, in most cases seem to suffer occupationally from divorce. For separated men the risk of negative changes in occupational prestige is greater than for cohabiting men. Formal On-the-job Training. A Gender-Typed Experience and Wage- Related Advantage? Formal on-the-job training (FOJT) can have a positive impact on wages and on promotion opportunities. According to theory and earlier research, a two-step model of gender inequality in FOJT is predicted: First, women are less likely than men to take part in FOJT and, second, once women do get the more remunerative training, they are not rewarded for their new skills to the same extent as men are. Pooled cross-sectional data from the Swedish Survey of Living Conditions (ULF) in the mid-nineties were used. Results show that women are significantly less likely than men to take part in FOJT. Among those who do receive training, women are more likely to take part in industry-specific training, whereas men are more likely to participate in general training and training that increases promotion opportunities. The two latter forms of training significantly raise a man’s annual earnings but not a woman’s. Hence, the theoretical model is supported and it is argued that this gender inequality is partly due to employers’ discriminatory practices.

Pet food: quality and quality improvement

Today’s pet food industry is growing rapidly, with pet owners demanding high-quality diets for their pets. The primary role of diet is to provide enough nutrients to meet metabolic requirements, while giving the consumer a feeling of well-being. Diet nutrient composition and digestibility are of crucial importance for health and well being of animals. A recent strategy to improve the quality of food is the use of “nutraceuticals” or “Functional foods”. At the moment, probiotics and prebiotics are among the most studied and frequently used functional food compounds in pet foods. The present thesis reported results from three different studies. The first study aimed to develop a simple laboratory method to predict pet foods digestibility. The developed method was based on the two-step multi-enzymatic incubation assay described by Vervaeke et al. (1989), with some modification in order to better represent the digestive physiology of dogs. A trial was then conducted to compare in vivo digestibility of pet-foods and in vitro digestibility using the newly developed method. Correlation coefficients showed a close correlation between digestibility data of total dry matter and crude protein obtained with in vivo and in vitro methods (0.9976 and 0.9957, respectively). Ether extract presented a lower correlation coefficient, although close to 1 (0.9098). Based on the present results, the new method could be considered as an alternative system of evaluation of dog foods digestibility, reducing the need for using experimental animals in digestibility trials. The second parte of the study aimed to isolate from dog faeces a Lactobacillus strain capable of exert a probiotic effect on dog intestinal microflora. A L. animalis strain was isolated from the faeces of 17 adult healthy dogs..The isolated strain was first studied in vitro when it was added to a canine faecal inoculum (at a final concentration of 6 Log CFU/mL) that was incubated in anaerobic serum bottles and syringes which simulated the large intestine of dogs. Samples of fermentation fluid were collected at 0, 4, 8, and 24 hours for analysis (ammonia, SCFA, pH, lactobacilli, enterococci, coliforms, clostridia). Consequently, the L. animalis strain was fed to nine dogs having lactobacilli counts lower than 4.5 Log CFU per g of faeces. The study indicated that the L animalis strain was able to survive gastrointestinal passage and transitorily colonize the dog intestine. Both in vitro and in vivo results showed that the L. animalis strain positively influenced composition and metabolism of the intestinal microflora of dogs. The third trail investigated in vitro the effects of several non-digestible oligosaccharides (NDO) on dog intestinal microflora composition and metabolism. Substrates were fermented using a canine faecal inoculum that was incubated in anaerobic serum bottles and syringes. Substrates were added at the final concentration of 1g/L (inulin, FOS, pectin, lactitol, gluconic acid) or 4g/L (chicory). Samples of fermentation fluid were collected at 0, 6, and 24 hours for analysis (ammonia, SCFA, pH, lactobacilli, enterococci, coliforms). Gas production was measured throughout the 24 h of the study. Among the tested NDO lactitol showed the best prebiotic properties. In fact, it reduced coliforms and increased lactobacilli counts, enhanced microbial fermentation and promoted the production of SCFA while decreasing BCFA. All the substrates that were investigated showed one or more positive effects on dog faecal microflora metabolism or composition. Further studies (in particular in vivo studies with dogs) will be needed to confirm the prebiotic properties of lactitol and evaluate its optimal level of inclusion in the diet.

Selezione e processazione di cellule Natural Killer da donatore aploidentico "KIR-ligand" incompatibile per l'immunoterapia adottiva di pazienti con Leucemia Acuta Mieloblastica ad alto rischio

The effector function of natural killer (NK) cells is regulated by activating and inhibitory receptors, termed killer immunoglobulin-like receptors (KIRs). In haploidentical T-cell depleted transplantation the donor/recipient KIR mismatch significantly impacts on NK-mediated tumor cell killing, particularly in acute myeloid leukaemia (AML). Thirty-four high risk AML patients entered a phase I-II study of adoptive NK-cell based immunotherapy and were screened for the availability of one haploidentical KIR ligand mismatched donor. Thirteen of them resulted as having one suitable donor. NK cells were enriched from steady-state leukaphereses by using a double-step immunomagnetic separation system, consisting in depletion of CD3+ T cells followed by positive selection of CD56+ NK cells. CD56+ cells were enriched from 7,70% (1,26-11,70) to 93,50% (66,41-99,20) (median recovery 53,05% (30,97-72,85), median T-depletion 3,03 log (2,15-4,52) viability >92%) and their citotoxic activity was inalterate. All patients (4 progressions, 1 partial remission and 8 complete remissions) received NK cell infusion which was preceeded by immunosuppressive chemotherapy (fludarabine and cyclophosphamide) and followed by interleukin 2 injections. The median number of reinfused NK cells was 2,74x10(e)6/kg(1,11-5,00) and contamining CD3+ T cells were always less than 1x10(e)5/kg. The procedure was well-tolerated and no significant toxicity, including GvHD, related to NK cell infusion was observed. The donor NK cells were demonstrated in 5/10 patients. Among the 8 patients in complete remission 5 patients are stable after 18, 15, 4, 2 months of follow-up. Three other patients relapsed after 2 and 7 months. The patient in partial remission obtained a complete remission, which lasted for 6 months. The 4 patients with active/progressive disease showed the persistence of disease. This clinical observation may be correlated with in vitro studies, indicating that AML cells are capable to induce NK cell apoptosis in a dose-depend manner. In summery, a two-step enrichment of CD56+ NK cells allows the collection of a suitable number of target cells to be used as adoptive immunotherapy in AML patients. Infusion of NK cells is feasible and safe and adoptively transferred NK cells can be detected after infusion.

Neue konjugierte Polyarylene mit Leiterstruktur

Zusammenfassung: Im Rahmen der Arbeit wird über die Darstellung neuartiger, konjugierter Polyarylene mit Leiterstruktur berichtet. Über eine zweistufige Synthese wurde ein ethylenüberbrücktes Leiterpolymer (LPDP) hergestellt. Dabei wurde das Vorläuferpolymer mit Samarium(II)jodid unter milden Bedingungen zum Leiterpolymeren cyclisiert. Erste Untersuchungen zeigen, daß LPDP im Gegensatz zum 'gewinkelten Polyacen' eine sehr vielversprechende Elektrolumineszenz-Eigenschaft besitzt. Durch den Einbau chiraler Alkylsubstituenten in entsprechenden meta-Phenylen-Analoga der Leiterpolymere vom Polyacen-Typ wurde versucht, eine Vorzugsdrehrichtung der helikalen Leiterpolymere im Laufe der polymeranalogen Cyclisierung zu induzieren. Es zeigt sich, daß für eines der chiralen Derivate ein CD-Effekt im Bereich der Absorption der helikalen Polyacen-Hauptkette auch auf molekularer Ebene auftritt. Weiterhin wird die erfolgreiche Synthese eines neuen, heteroaromatischen Leiterpolymeren, LPPPT, beschrieben, welches alternierend aus 1,4-Phenylen- und 2,5-Thienylen-Einheiten aufgebaut ist. Eine LED in der Konfiguration ITO/LPPPT/Al zeigt eine orange Lichtemission. Die Quanteneffizienz der freien Ladungsträgerbildung für LPPPT wurde in Experimenten zur Ladungstraegergeneration im elektrischen Feld (Coronaentladung) zu ca. 1 % bei 10E7 V/m bestimmt. Letztlich wurde die Synthese eines neuen, heteroaromatischen Leiterpolymeren mit Carbazol-Einheiten, LPPPC, in der Hauptkette beschrieben, das alternierend aus 1,4-Phenylen- und Carbazol-3,6-diyl-Einheiten aufgebaut ist. Untersuchungen am LPPPC ergaben, daß das Polymer gute Lochleitereigenschaften besitzt, daneben weisen dünne Filme von LPPPC auch photovoltaische Eigenschaften auf.