Análise dos remanescentes de mata atlântica do Estado do Rio Grande do Norte : uma perspectiva em alta resolução

The habitat loss and fragmentation are considered the main threats to the biodiversity. These threats operate at the landscape level, which drives the need to manage entire landscapes, not just its components. Although systematic monitoring of the Atlantic Forest biome has been ongoing since the late eighties, current data on forest fragmentation for the sub-region of Pernambuco are practically nonexistent. This study aimed to map out, with high spatial resolution, the remnants of Atlantic forest in Rio Grande do Norte, and conduct a landscape level analysis. The results show that the landscape is highly fragmented, where about 13.6% to 17% of biome remains. Most of the fragments is less than 10 ha, while a few fragments have area larger than 100 ha. Although the high degree of fragmentation, the average distance between fragments found was small (128 m), this estimate is lower than has been observed for the biome (1440m). There is evidence that abrupt changes in the quantification of landscape structure can occur when one observes the fragmentation at high spatial resolution. The results presented here can be used in management actions, in order to make the scenario more conducive to maintaining biodiversity.

Concentrações séricas hormonais em vacas azebuadas submetidas à baixa e alta ingestão alimentar

O objetivo deste trabalho foi avaliar a influência da ingestão alimentar nas concentrações séricas de hormônios reprodutivos e metabólicos em vacas azebuadas. Dezoito vacas foram divididas em dois grupos: 170% (alta ingestão = A) e 66% (baixa ingestão = B) da dieta de manutenção. Com 21 dias nas dietas experimentais, as vacas tiveram o estro sincronizado. Posteriormente, os ovários foram avaliados por ultra-sonografia transretal e sangue foi coletado diariamente até o dia 7 do ciclo (ovulação = dia 1). Na análise estatística, utilizou-se o teste t. As vacas ganharam 1,1 kg por dia no grupo A e perderam 1,5 kg por dia de PV no grupo B. Apesar de não ter havido diferença entre os grupos no diâmetro máximo do folículo ovulatório, o grupo A apresentou pico pré-ovulatório de estradiol sérico menor. Não foi observada diferença entre os grupos quanto ao volume luteal e concentração sérica de progesterona no dia 7 do ciclo e de FSH, IGF-I e insulina séricos no período peri-ovulatório. As dietas experimentais não alteraram a função ovariana e as concentrações séricas de hormônios reprodutivos e metabólicos, com exceção do estradiol, sugerindo que, no grupo de alta ingestão, ocorreu maior metabolismo desse hormônio.

Características agronômicas e qualidade comercial de cultivares de milho pipoca em alta população

Com o objetivo de identificar cultivares de milho pipoca que se constituam em alternativa viável aos produtores foi conduzido um experimento em delineamento experimental de blocos casualizados, com cinco genótipos de milho pipoca (BRS Ângela, Zélia, IAC 112, IAC 12 e IAC TC-01) e quatro repetições, na safra 2003/2004. O experimento foi instalado em espaçamento entre as linhas de 60 cm, com densidade populacional de 75 mil plantas por hectare. No decorrer do experimento, foram avaliadas características agronômicas e comerciais em condição de campo e de laboratório. A variedade BRS Ângela apresentou maior produtividade, seguida pelos híbridos simples IAC, com Zélia (híbrido triplo) apresentando menor produtividade. O híbrido simples IAC 12 apresentou pior qualidade comercial de pipoca. A produção de grãos está associada positivamente com o número de grãos por espiga e com a massa de 1.000 grãos e negativamente com o teor de Ntotal no grão. A qualidade comercial se correlacionou negativamente com a massa de 1.000 grãos.

Evidências de validação de um protocolo para assistência às pessoas com úlceras venosas em serviços de alta complexidade

Venous ulcers are lesions resulting from chronic venous insufficiency, venous valvular abnormalities and venous thrombosis. Its occurrence has been growing with the increase in life expectancy of the world population. Considered as fundamental aspects in the approach to the person with venous ulcer care with the interdisciplinary approach, adoption of protocol-specific knowledge, technical skill, coordination between levels of care complexity of the Health System and active participation of patients and their families, a holistic perspective. The construction of a clinical protocol for people with venous ulcers can help professionals of high complexity services in patient assessment and the establishment of quality care in a systematic way and focused on the factors that interfere with wound healing. Thus, this study aimed to analyze the evidence of validation of a clinical protocol for people with venous ulcers treated at high-complexity services. This is a methodological study with a quantitative approach, developed in three stages: literature review, evidence of content validity and evidence of validation in the clinical context. Approved by the Federal University of Rio Grande do Norte Research Ethics Committee (Opinion: 147.452 and CAAE: 07556312.0.0000.5537). The literature review was conducted in August and September 2012, becoming the basis for the construction of the protocol. Then the evidence of content validity, which included 53 judges (experts) selected by the Lattes platform to evaluate the protocol items was performed. The judges were contacted by e-mail and rated the protocol via Google Docs . After analyzing the ratios obtained in this step, which reported kappa between 0.75 and 0.96 and between 0.80 and 0.98 IVC, and the suggestions of the judges, the protocol was adjusted and subjected to empirical evidence to validate the clinical setting at the University Hospital Onofre Lopes in Natal / RN. Evidence of validation in the clinical setting involved 4 judges who acted in pairs (paired) evaluated 32 patients with venous ulcers in the clinical context of high complexity. In both stages, we used the Kappa Index and Content Validity Index to analyze the responses of the judges. The parameters set as acceptable for these indices were: Kappa ≥ 0.61 and Content Validity Index > 0.80. Any evidence of content validity, as evidence of validation in the clinical context, the protocol items that have not reached Kappa and Content Validity Index established indices were excluded and some items were modified or added after suggestions. The process of content validation evidence and evidence of validation in the clinical setting allowed the improvement of the protocol for the care of people with venous ulcers initially proposed. The initial version of the protocol, built from the literature, contained 15 categories and 108 items; after evidence of content validity, remained the reduction to 15 categories with 91 items; the final version, clinically validated, is composed of the same 15 categories, 76 items. The protocol was validated in its content and in the clinical aspect, so we accepted the alternative hypothesis in the study. This protocol may contribute to the care system, allowing tailor behaviors and promote greater resolution in the treatment of people with venous ulcers in health services of high complexity

Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico

This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technological option for the high-frequency electronic power converters development. The resonant converter operates at 50 kW output power under a 400 kHz frequency and it is constituted by inverter cells using ultra-fast IGBT devices. In order to minimize the turn-off losses, the inverter cells operates in a ZVS mode referred by a modified PLL loop that maintains this condition stable, despite the load variations. The sequential pulse gating command strategy used it allows to operate the IGBT devices on its maximum power limits using the derating and destressing current scheme, as well as it propitiates a frequency multiplication of the inverters set. The output converter is connected to a series resonant circuit constituted by the applicator ICTP torch, a compensation capacitor and an impedance matching RF transformer. At the final, are presented the experimental results and the many tests achieved in laboratory as form to validate the proposed new technique

Implementação de um algoritmo para a análise de curtos-circuitos de alta impedância baseado no fluxo de carga soma de potências

This work has as main objective to show all the particularities regarding the Three-phase Power Summation Method, used for load flow calculation, in what it says respect to the influence of the magnetic coupling among the phases, as well as to the losses presented in all the existent transformers in the feeder to be analyzed. Besides, its application is detailed in the study of the short-circuits, that happen in the presence of high impedance values, which possess a problem, that is its difficult detection and consequent elimination on the part of common devices of protection. That happens due to the characteristic presented by the current of short¬ circuit, in being generally of the same order of greatness that the load currents. Results of simulations accomplished in several situations will be shown, objectifying a complete analysis of the behavior of the proposed method in several types of short-circuits. Confront of the results obtained by the method with results of another works will be presented to verify its effectiveness

Efeitos do thidiazuron e do ácido giberélico nas características dos cachos de uva de mesa cultivar Rubi, na região da Nova Alta Paulista

Com o objetivo de avaliar os efeitos de thidiazuron e de ácido giberélico nas características dos cachos de uvas 'Rubi', foi conduzido um experimento, utilizando-se de thidiazuron a 5 e 10 mg.L-1 e ácido giberélico a 20mg.L-1, combinados ou não. As aplicações dos produtos foram realizadas aos 14; 21 ou 28 dias após o pleno florescimento, por meio de imersão dos cachos. Todos os tratamentos com reguladores de crescimento aumentaram a massa dos cachos. A massa dos bagos e dos engaços foi identicamente influenciada pela aplicação dos produtos, porém menos evidente, quando as aplicações foram realizadas aos 28 dias após o pleno florescimento. As aplicações de thidiazuron a 5mg.L-1, aos 14 ou 21 dias após o florescimento, não diferiram das aplicações de ácido giberélico para as variáveis estudadas. Não houve diferenças significativas para as variáveis teor de sólidos solúveis totais, acidez titulável, porém os tratamentos com thidiazuron retardaram a maturação em até 7 dias.

Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co

Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WC Co, and additionally affected by the microstructure of WC powders before sintering. An important feature is that the toughness and the hardness increase simultaneously with the refining of WC. Therefore, development of nanostructured WC Co hardmetal has been extensively studied. There are many methods to manufacture WC-Co hard metals, including spraying conversion process, co-precipitation, displacement reaction process, mechanochemical synthesis and high energy ball milling. High energy ball milling is a simple and efficient way of manufacturing the fine powder with nanostructure. In this process, the continuous impacts on the powders promote pronounced changes and the brittle phase is refined until nanometric scale, bring into ductile matrix, and this ductile phase is deformed, re-welded and hardened. The goal of this work was investigate the effects of highenergy milling time in the micro structural changes in the WC-Co particulate composite, particularly in the refinement of the crystallite size and lattice strain. The starting powders were WC (average particle size D50 0.87 μm) supplied by Wolfram, Berglau-u. Hutten - GMBH and Co (average particle size D50 0.93 μm) supplied by H.C.Starck. Mixing 90% WC and 10% Co in planetary ball milling at 2, 10, 20, 50, 70, 100 and 150 hours, BPR 15:1, 400 rpm. The starting powders and the milled particulate composite samples were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) to identify phases and morphology. The crystallite size and lattice strain were measured by Rietveld s method. This procedure allowed obtaining more precise information about the influence of each one in the microstructure. The results show that high energy milling is efficient manufacturing process of WC-Co composite, and the milling time have great influence in the microstructure of the final particles, crushing and dispersing the finely WC nanometric order in the Co particles

Influência da formação de pozolanas com adição de metacaulim em concreto de alta resistência

The need to build durable structures and resistant to harsh environments enabled the development of high strength concrete, these activities generate a high cement consumption, which implies factor in CO2 emissions. Often the desired strength is not achieved using only the cement composition. This study aims to evaluate the influence of pozzolans with the addition of metakaolin on the physical mechanics of high strength concrete comparing them with the standard formulation. Assays were performed to characterize the aggregates according to NBR 7211, evaluation of cement and coarse aggregate through the trials of petrography (NBR 15577-3/08) and alkali-aggregate reaction (NBR 15577-05/08). Specimens were fabricated according to NBR 5738-1/04 with additions of 0%, 4%, 6%, 8% and 10% of metakaolin for cement mortars CP V in the formulations. For evaluation of the concrete hardened in fresh state and scattering assays were performed and compressive strength in accordance with the NBR 7223/1992 and NBR 5739-8/94 respectively. The results of the characterization of aggregates showed good characteristics regarding size analysis and petrography, as well as potentially innocuous as the alkali-aggregate reaction. As to the test of resistance to compression, all the formulations with the addition of metakaolin showed higher value at 28 days of disruption compared with the standard formulation. These results present an alternative to reduce CO2 emissions, and improvements in the quality and durability of concrete, because the fine particle size of metakaolin provides an optimal compression of the mass directly influencing the strength and rheology of the dough

Obtenção de Propriedades Físico-Químicas de Misturas de Hidrocarbonetos em Baixa e Alta Pressão Visando a Caracterização e a Modelagem

The composition of petroleum may change from well to well and its resulting characteristics influence significantly the refine products. Therefore, it is important to characterize the oil in order to know its properties and send it adequately for processing. Since petroleum is a multicomponent mixture, the use of synthetic mixtures that are representative of oil fractions provides a better understand of the real mixture behavior. One way for characterization is usually obtained through correlation of physico-chemical properties of easy measurement, such as density, specific gravity, viscosity, and refractive index. In this work new measurements were obtained for density, specific gravity, viscosity, and refractive index of the following binary mixtures: n-heptane + hexadecane, cyclohexane + hexadecane, and benzene + hexadecane. These measurements were accomplished at low pressure and temperatures in the range 288.15 K to 310.95 K. These data were applied in the development of a new method of oil characterization. Furthermore, a series of measurements of density at high pressure and temperature of the binary mixture cyclohexane + n-hexadecane were performed. The ranges of pressure and temperature were 6.895 to 62.053 MPa and 318.15 to 413.15 K, respectively. Based on these experimental data of compressed liquid mixtures, a thermodynamic modeling was proposed using the Peng-Robinson equation of state (EOS). The EOS was modified with scaling of volume and a relatively reduced number of parameters were employed. The results were satisfactory demonstrating accuracy not only for density data, but also for isobaric thermal expansion and isothermal compressibility coefficients. This thesis aims to contribute in a scientific manner to the technological problem of refining heavy fractions of oil. This problem was treated in two steps, i.e., characterization and search of the processes that can produce streams with economical interest, such as solvent extraction at high pressure and temperature. In order to determine phase equilibrium data in these conditions, conceptual projects of two new experimental apparatus were developed. These devices consist of cells of variable volume together with a analytical static device. Therefore, this thesis contributed with the subject of characterization of hydrocarbons mixtures and with development of equilibrium cells operating at high pressure and temperature. These contributions are focused on the technological problem of refining heavy oil fractions

Mapeamento do biovolume de plantas aquáticas submersas a partir de dados hidroacústicos e imagem multiespectral de alta resolução

As plantas aquáticas têm papel fundamental no equilíbrio dos ecossistemas, porém seu crescimento desequilibrado pode obstruir canais, represas e reservatórios e afetar múltiplos usos da água. em relação a plantas aquáticas submersas, a utilização de medidas de controle torna-se mais complexa, em face da dificuldade em mapear e quantificar volumetricamente as áreas colonizadas. Nessas situações, considera-se que o uso de dados hidroacústicos possibilite o mapeamento e a mensuração dessas áreas, auxiliando na elaboração de propostas de manejo sustentáveis desse tipo de vegetação aquática. Assim, o presente trabalho utilizou dados acústicos e a técnica de krigagem para realizar a inferência espacial do biovolume de plantas aquáticas submersas. Os dados foram obtidos em três levantamentos ecobatimétricos realizados em uma área de estudos localizada no rio Paraná, caracterizada por condições favoráveis para proliferação de vegetação aquática submersa e dificuldade de navegação. Para delimitar as áreas caracterizadas pela presença de plantas aquáticas submersas, utilizou-se uma imagem multiespectral de alta resolução espacial World View-2. O mapeamento do biovolume das plantas aquáticas submersas nas áreas de ocorrência do fenômeno foi realizado a partir da inferência do biovolume por krigagem e do fatiamento dos valores inferidos em intervalos de 15%. A partir do mapa gerado, foi possível identificar os locais de maior concentração de macrófitas submersas, com predominância de valores de biovolume entre 15-30% e 30-45%, confirmando a viabilidade da utilização da krigagem na inferência espacial do biovolume, a partir de medidas ecobatimétricas georreferenciadas e com o suporte de imagem de alta resolução espacial.

Transformação de Helmert generalizada no posicionamento de alta precisão: fundamentação teórica e exemplificações

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Integração de imagem aérea de alta resolução e dados de varredura a laser na classificação de cenas urbanas para detectar regiões de via

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morfologia matemática aplicada à detecção de sombras e nuvens em imagens de alta resolução

The spatial resolution improvement of orbital sensors has broadened considerably the applicability of their images in solving urban areas problems. But as the spatial resolution improves, the shadows become even a more serious problem especially when detailed information (under the shadows) is required. Besides those shadows caused by buildings and houses, clouds projected shadows are likely to occur. In this case there is information occlusion by the cloud in association with low illumination and contrast areas caused by the cloud shadow on the ground. Thus, it's important to use efficient methods to detect shadows and clouds areas in digital images taking in count that these areas care for especial processing. This paper proposes the application of Mathematical Morphology (MM) in shadow and clouds detection. Two parts of a panchromatic QuickBird image of Cuiab-MT urban area were used. The proposed method takes advantage of the fact that shadows (low intensity - dark areas) and clouds (high intensity - bright areas) represent the bottom and top, respectively, of the image as it is thought to be a topographic surface. This characteristic allowed MM area opening and closing operations to be applied to reduce or eliminate the bottom and top of the topographic surface.

Predição de sombras de edifícios sobre vias urbanas com base em modelos digitais de elevações e dados de imagens aéreas de alta resolução

This research presents a methodology for prediction of building shadows cast on urban roads existing on high-resolution aerial imagery. Shadow elements can be used in the modeling of contextual information, whose use has become more and more common in image analysis complex processes. The proposed methodology consists in three sequential steps. First, the building roof contours are manually extracted from an intensity image generated by the transformation of a digital elevation model (DEM) obtained from airborne laser scanning data. In similarly, the roadside contours are extracted, now from the radiometric information of the laser scanning data. Second, the roof contour polygons are projected onto the adjacent roads by using the parallel projection straight lines, whose directions are computed from the solar ephemeris, which depends on the aerial image acquisition time. Finally, parts of shadow polygons that are free from building perspective obstructions are determined, given rise to new shadow polygons. The results obtained in the experimental evaluation of the methodology showed that the method works properly, since it allowed the prediction of shadow in high-resolution imagery with high accuracy and reliability.