Estudo da toxicidade de diferentes doses do Diuron (3-(3,4 -dichlorophenyl)-1,1-dimethylurea) no epitélio da bexiga de ratos wistas machos por microscopia eletrônica de varredura

Diuron (3-(3,4-Dichlorophenyl)-1,1-dimethylurea) is a substituted urea herbicide widely used on agricultural crops such as soy, cotton and sugar cane. In a previous long-term study this herbicide exerted carcinogenic activity on the urinary bladder and renal pelvis mucosa of Wistar rats and breast of mice. Also, it was shown to be carcinogenic to the mice skin in a initiation-promotion assay. In 1997, the northamerican EPA evaluated Diuron as a “known/likely” carcinogen for humans (USEPA, 2004). In a previous study developed at this laboratory, male Wistar rats treated with Diuron 2500 ppm during 20 weeks presented increased indices of cell proliferation and incidences of simple urothelial hyperplasia (HS) in the urinary bladder. Under scanning electron microscopy (SEM) severe urothelial necrosis and hyperplasia were observed. However, in that study the urinary bladders of animals exposed to lower doses of Diuron were not examined under SEM. Therefore, the possible dose-response influence of Diuron on the urothelium under SEM is not known. The present study aimed to analyze under SEM the urinary bladder of male Wistar rats exposed to 125 ppm, 500 ppm and 2500 ppm doses of Diuron through diet during 20 weeks and to compare to the previous histological findings in the same material. Under SEM, 125 ppm and 2500 ppm groups presented significantly (p<0,05) increased incidences of simple hyperplasia, i.e., 7/10 and 8/10 respectively, compared to control group and the 500 ppm group The sensitivity of SEM was higher since it detected a 45% incidence of hyperplasiaswhile the histological analysis found only 27%. Considering SEM as the gold-standard, histology showed a 44% sensitivity, 86.4% specificity, a positive predictive value of 72,7% and negative predictive value of 65,5% and accuracy of 67,5%. Scanning Electron Microscopy...(Complete abstract click electronic access below)

Avaliação da toxicidade da vinhaça utilizando Oreochromis niloticus (Perciformes: Cichlidae) como organismo teste

Contamination of rivers and lakes, waste disposed by infiltration into the soil as fertilizer, for example, has been highlighted around the world, since such compounds can contain toxic elements, causing changes in aquatic and/or terrestrial ecosystem. Due to the possible presence of these elements in these wastes, it is possible assess damage to organisms exposed through breaks in genetic material and mutations. In this sense, this work aimed at exploring the cytotoxic, mutagenic and genotoxic vinasse pontential, residue used as fertilizer, from the processing of sugar cane into alcohol, using fish (Oreochromis niloticus - Cichlidae) as a test organism. The individuals were exposed to different dilutions of vinasse in the water and later carried out analysis of their erythrocytes using the micronucleus test and nuclear abnormalities associated and the comet assay. In the first bioassay, tilapia exhibited 5% and 10% vinasse concentrations died after 48h. The number of micronucleated erythrocytes was statistically significant for the 1% vinasse concentration and also for nuclear abnormalities such as broken-egg and nuclear bud, when compared with negative and positive controls; were also significant lobed type erythrocytes, when compared to the negative control. The test results of the comet assay were not significant for 1% vinasse when compared to the negative control, due to the high rate of comets with damage control, which is unusual. The same was observed for changes as notched and blebbed type. In the second chemical analyzes conducted, the detection of heavy metals in the vinasse sample, charged only the presence of copper and chromium, the latter with a concentration 89 times higher than in the first test. Differentially the first bioassay, fish exposed to dilution of 5% did not die... (Complete abstract click electronic access below)

Biodegradação de óleos derivados do petróleo e de origem vegetal estimulada por biossurfactantes em meio aquoso e monitoramento de sua toxicidade

Não disponível

Estudo da usinagem por torneamento de ligas de alumínio

The non-ferrous materials have got so many mechanical, physical and chemical advantageous properties so that is provided to them consolidated position in industry. In this context, aluminium alloys have been seen a lot on many applications of engineering areas – specially on automotive, aeronautical and aerospace due to their main properties such as low density, high corrosion resistance, favorable structure weight / material resistance relation, among others characteristics that are mencioned through this study. This study aims to analyze the aluminium alloys behavior on a general context when they are used on turning process, taking for examples the 6262 and 7050 aluminium alloys. In this way, the analysis studies the datas obtained during the turning tests realized on 3 steps each one; those datas are concerning the medium and total rugosities – obtained with the assistance of a portable Surface Roughness Finish Tester, as well as the chips obtained during the tests - visual analysis, and the cutting tools wear – with the assistance of an optical microscope, under different conditions of application of cutting fluids (dry machining, application of coolant in abundance and MQL – Minimum Quantity of Lubricant). The results concerning this study show detailed information about influence of cutting fluids on the machining by turning of the aluminium alloys related on this work and also about aluminium alloys in general when they are used on turning processes with different conditions from one another. By this way, it was evident the MQL technique is the best one for the 6262 alloy. However, for 7050 alloy, it was evident that the dry machining is responsible for the best results

Desenvolvimento de um protetor lateral em alumínio

In view of the need to develop a device for security and lateral protection, due to the Resolution 323/09 of CONTRAN, which requires the use of such equipment for most trucks and tow trucks, the objective of this work is to develop a project for an aluminum lateral protection device, according to the ABNT NBR 14.148 regulation, that, among many specifications, stipulates that the equipment must support a load of 5 kN and suffer a maximum deflection of 30mm, but does not say what material it should be made of. The reason for choosing aluminum is because of its low density, so as not to significantly increase the curb weight of the truck, which, consequently, reduces CO2 emissions and maintenance expenses. Additionally, this material presents a good resistance/weight ratio, high resistance to corrosion, excellent surface finish and it's fully recyclable; reason why it has been gaining the attention of many industry segments. For the realization of the project, profiles were chosen to make the assembly of the set, and then a finite elements analysis was performed in the HyperWorks software, to verify if the designed device would support the loads stipulated by the regulation. One details to note is that these simulation programs could show inaccuracies, because of the size and shape of the elements that compose the mesh, and for many other reasons, so it is necessary that, even with the results coming back satisfactory, actual physical tests are conducted to validate the proper functioning of the equipment, which was not done for this study

Efeito do fornecimento de diferentes níveis de alumínio dietético na qualidade óssea de codornas poedeiras (Coturnix japonica)

O alumínio está presente de forma marcante em nosso cotidiano, com várias possibilidades de contaminação para o ser humano e animais, através da ingestão de alimentos ou aditivos presentes nos alimentos ou, também, através do uso de medicamentos. Por apresentar uma forte carga elétrica, um forte poder de polarização e características similares com elementos da hidroxiapatita, o alumínio age como um competidor de nutrientes na matriz óssea, Por isso, ele pode ser causa danos à saúde dos seres vivos, como a osteoporose. Diante disso, a presente pesquisa teve como objetivos estudar a influência de diferentes níveis de alumínio na dieta de codornas poedeiras, sobre as características físicas e químicas de seus ossos. A densidade e a porosidade óssea foram determinadas pelo método de imersão em água, utilizando o princípio de Arquimedes. Os resultados obtidos mostraram que concetrações até 20 mg de alumínio por kg de ração fornecida causa uma diminuição na densidade óssea e volta a aumentar para concetrações maiores que este limiar. A porosidade óssea, segue o inverso da densidade. Ela aumenta com concetrações até 20 mg de alumínio por kg de ração fornecida e volta a diminuir para concetrações menores

Avaliação do efeito do tratamento com surfactante químico e Pseudomonas aeruginosa LBI na toxicidade de solo contaminado com óleo lubrificante usado

Petroleum and its subproducts are considered a treat for the environmental quality because of the many environmental accidents that may occur during exploitation, transport and storage. A common remediation technique used in the contaminated areas is based on the use of surfactants, mainly the chemical ones, because they have low production costs. In the other hand, some microorganisms have indicate capacities of producing surfactants that emulsify substances and as result, offer a bigger contact surface for the microbiota degradation. This biossurfactants stand out in comparison with the chemical surfactants because they present lower micelar concentration values, are more tolerant for temperature and pH variation, because they are biodegradable, have low toxicity, higher emulsification and hydrocarbon solubilization index. In this way, after the surfactant application, a toxicity evaluation have to be made to identify the treatment effects. In soil, the activity of some microbial enzymes can show the environmental behavior of the contaminant under different treatment conditions. Dehydrogenase is one example of those enzymes that can demonstrate indirectly the effect of the pollutant on the soil microorganisms. The aim of this paper was to evaluate the toxicity after the addition of a surfactant and/or Pseudomonas aeruginosa LBI in soil contaminated by a mineral automotive lubricant. The previous mentioned bacteria are a potential biossurfactant (rhamnolipid) producer. In order to evaluate the toxicity, the dehydrogenase test was run. In this test, trifeniltetrazolium compound (TTC) after utilized as an electron acceptor, turns into trifenil formazan (TPF), that can be indirectly quantified using the absorbance measured by the spectrophotometer UV-visible. In this way, it was possible to quantify the dehydrogenase activity from the contaminated soil samples... (Complete abstract click electronic access below)

Avaliação da toxicidade do cloreto de níquel utilizando Allium cepa como organismo teste

O impacto das atividades antropogênicas sobre o meio ambiente é um tema de grande relevância atualmente, atraindo a atenção da comunidade científica em geral, visto que essas atividades têm causado alterações significativas na qualidade da água, do solo e do ar. Dentre a ampla gama de poluentes resultantes das atividades humanas, merece destaque a classe dos metais pesados, os quais possuem propriedades tóxicas e genotóxicas, constituindo fatores de risco para o desenvolvimento de desordens neurodegenerativas, artrite e câncer nas populações expostas a estes contaminantes, bem como alterações nos ecossistemas contaminados. Neste sentido, o presente trabalho teve por objetivo avaliar o potencial citotóxico, genotóxico e mutagênico do níquel como contaminante, utilizando Allium cepa (Liliaceae) como organismo-teste, a fim de detectar possíveis efeitos deletérios em seu material genético. Estas avaliações foram feitas por meio da exposição de sementes de A. cepa a três soluções, com diferentes concentrações de níquel. Os resultados obtidos no primeiro biensaio e na repetição estão apresentados na forma de artigo científico, a ser submetido para revista especializada. O estudo dos efeitos do níquel em A. cepa foram importantes, uma vez que os dados da avaliação dos danos induzidos neste organismo modelo podem ser utilizados para a comparação com modelos animais, sendo possível assim, a inferência dos perigos aos ecossistemas e à população que está exposta a esse contaminante

Processo de fabricação de tarugos pelo método HotTop de ligas de alumínio da série 6XXX e as não conformidades desse processamento

The goal of this work is to report some problems that occur in the in the production of aluminum billets (series 6XXX) produced by the hot top process in the Alcoa aluminum Inc. The aluminum fabrication process is described from its first stage, since the mining until the reduction, smelting and treatment of the metal. One of the plant’s final product, are billets for clients that produce profiles by extrusion. The product’s final quality highly depends on the whole production process. Therefore it’s necessary to use good practices in the treatment of the metal, follow up its fabrication and control its thermal treatment, in order to meet the required standards to satisfy the clients. The billet’s production method and its variables will be detailed through temperature and casting speed, cone of water flow, cooling rate, duration of thermal treatment, degassing and metal “in line “filtering, in other words when it’s still found in its liquid state. The non-conformities of the process were studied by metallographic analysis, both macrostutural and microstructural that will be described and discussed in this work

Tubo digestório de diplópodos e sua aplicabilidade em estudos de toxicidade de solos: uma revisão

Diplópodos são animais detritívoros sendo considerados importantes macro-artrópodos do solo, desempenhando importante papel na manutenção do equilíbrio do ecossistema. Comumente não apresentam população numerosa, mas desequilíbrios ambientais, mudanças climáticas e utilização de pesticidas podem eliminar possíveis competidores ocasionando explosões populacionais. Dotados de um corpo cilíndrico com 25 a 100 segmentos com cutícula; o exoesqueleto da maioria dos diplópodos é fortemente calcificado. Possuem diplossegmentos que se originam da fusão entre dois segmentos durante o desenvolvimento e a grande parte destes diplossegmentos apresenta dois pares de pernas, de onde deriva o nome Diplopoda. O tubo digestório destes animais é formado por três regiões: o intestino anterior, o médio e o posterior. Trabalhos com morfologia do tubo digestório de milípides são raros e na maioria antigos. Assim, este trabalho de conclusão de curso objetivou realizar uma revisão bibliográfica sobre as descrições morfológicas existentes sobre o tubo digestório de diplópodos visando rever a nomenclatura utilizada para os diferentes componentes presentes nas regiões que o compõem, principalmente para o tecido presente na região do intestino médio denominada até então de camada de “corpo gorduroso” constituinte do intestino médio. Foi intuito também, rever a utilização do tubo digestório de diplópodos como biomarcador em bioensaios de solos impactados. Após a revisão dos dados na literatura, ficou claro que a camada presente no intestino médio de diplópodos, denominada de “corpo gorduroso”, na realidade é constituída por células hepáticas, as quais foram descritas na literatura como sendo de distribuição aleatória, sem formar uma camada contínua

Avaliação da toxicidade do dióxido de carbono no sistema nervoso de Apis mellifera (Hymenoptera, Apidae)

A concentração de dióxido de carbono (CO2) global eleva-se a cada ano, isso deve-se a um desequilíbrio entre as taxas de emissão deste gás por atividades antropogênicas e fontes naturais e a taxa que a biosfera e oceanos o removem da atmosfera. O CO2 é um importante constituinte químico do ambiente, pois este é um gás que aprisiona radiação infravermelha emitida pela superfície da Terra, contribuindo, assim, para a manutenção da temperatura global necessária a vida. As alterações na concentração de CO2 na atmosfera afetam inúmeros animais que dependem que estas estejam altamente controladas para poderem sobreviver. Em abelhas Apis mellifera valores elevados de temperatura ou níveis de CO2 dentro da colméia podem ter efeitos deletérios. Estes insetos são considerados bioindicadores naturais, pois apresentam diferenças fisiológicas conforme as condições do ambiente, sendo utilizadas na avaliação de efeitos a várias substâncias presentes no meio. Atualmente uma das técnicas utilizadas para a avaliação do efeito de estímulos externos é a utilização da marcação da proteína c-Fos através da expressão do gene c-fos, que indicam tanto a existência de atividade celular como também possibilita a identificação de áreas cerebrais determinadas. Esta proteína foi utilizada com o intuído de verificar se concentrações elevadas de gás carbônico são capazes de alterar as funções cerebrais da abelha Apis mellifera, comprometendo sua atividade de orientação e, conseqüentemente seu forrageamento. Marcações positivas à proteína Fos foram observadas nas regiões dos lobos ópticos e ocelos tanto do grupo controle quanto dos grupos Resumo Jacob, C. R. O. 9 expostos ao gás dióxido de carbono para todas as idades coletadas, estes resultados estão relacionados com a...(Resumo completo, clicar acesso eletrônico abaixo)

Análise da curva de resfriamento e refino de grão da liga de alumínio AA 356

The macrostructure of an alloy solidification in the raw state is of utmost importance due to its influence on mechanical properties. A structure showing columnar grains is generally undesirable in most applications of cast products and grain refining aims to suppress the formation of these grains and get a fine-grained equiaxed structure that improves the supply of liquid metal and the mechanical properties, as yield strength and tensile strength limit, as well as the tendency of formation of hot cracks. The type and size of grains formed are determined by chemical composition, cooling rate and the use of inoculum for grain refining. Titanium and boron are the major refiners in the aluminum industry and can be added to the molten metal in the form of alloys such as Al-Ti, Al-Ti-B or Al-B. In this paper we will discuss the information obtained from cooling curves and first derivative of the cooling curve to obtain the thermal parameters that influence the process of grain refining alloy AA 356.0

Avaliação da toxicidade sobre Ceriodaphnia dubia das águas dos rios Atibaia, Jaguari e efluente tratado de refinaria de petróleo

Ensuring availability of quality water for human consumption causes becomes an increasing number of studies for the analysis of effluent before and after treatment, so that its release into receiving bodies do not cause significant changes in the river water and on the biological communities related to them. The biomarkers of toxicity have long been used to verify the potential toxic effluent and its correlation with the treatment efficiency of them. In this context, the cladoceran Ceriodaphnia dubia stands out because it is a benthic aquatic organism highly sensitive to environmental changes. In this study, to evaluate the interference of the release of treated wastewater of oil refinery in Rio Atibaia, we sought to determine the toxicity on population dynamics of Ceriodaphnia dubia microcrustacean in water samples upstream and downstream from the launch site, compared with samples from Rio Jaguarí at the point of capture by the company itself and treated effluent. We have studied the number of offspring produced in 10 replicates, each starting with a test individual of up to 24 hours for each sample and correlated the results with physical-chemical and microbiological tests performed by a laboratory technician. For most tests, the results indicate that the treated effluent gives sub-lethal toxicity to the microcrustacean, as delay the onset of the reproductive cycle of the same

Avaliação da toxicidade da vinhaça por meio da análise histológica de fígados de peixes Oreochromis niloticus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tratamento da superfície do alumínio via eletrólise a plasma

This paper presents the study on the application of the electrolytic plasma for surface treatment of aluminum. A bibliographical study on the material of interest was preliminarily performed and later designed and built an electrolytic cell, including the excitation source. Unlike conventional electrolysis process, the plasma assisted carry on in the non-linear region of characteristic current/voltage curve. Therefore it requires for the on set of the process that the power supply operates on harder conditions than those on high current process. The plasma produced during the present investigation has temperatures in the range o 6,0.10 3 -7,0 .10 3 K, well above those found in conventional chemical process. It also shows a particular dynamic to promote changes on surface and to produce new materials. The plasma is generated by microdischarge in vapor or gas bubbles involved in physic-chemical processes in electrode regions of the electrolytic cell. The electrode material was the aluminum (7075). The Process Electrolytic Plasma Processing (EPP) is sensitive to various parameters such as operating voltage, current density, electrolyte, concentration of electrolyte, geometry of reactor, temperature of electrolytic solution and dynamic of the fluid in the cell. The experiments were carried on in order to find parameters for a stable abd steady operation. The choice for the electrolytic was silicate/alkali solution in various concentrations to operate in various voltage as well. Plasma was produced on negative (cathode) and positive (anode) electrode, in specific conditions. A stable operation on the cathode process was obtained with low concentration of the electrolytic in aqueous solution, current density around 250V effective voltage. For the evolution of plasma in anodic process it was required higher concentrations and higher... (Complete abstract click electronic access below)