The effects of welding heat input on the usability of high strength steels in welded structures

High strength steel (HSS) has been in use in workshops since the 1980s. At that time, the significance of the term HSS differed from the modern conception as the maximum yield strength of HSSs has increased nearly every year. There are three different ways to make HSS. The first and oldest method is QT (quenched and tempered) followed by the TMCP (thermomechanical controlled process) and DQ (direct quenching) methods. This thesis consists of two parts, the first of which part introduces the research topic and discusses welded HSS structures by characterizing the most important variables. In the second part of the thesis, the usability of welded HSS structures is examined through a set of laboratory tests. The results of this study explain the differences in the usability of the welded HSSs made by the three different methods. The results additionally indicate that usage of different HSSs in the welded structures presumes that manufacturers know what kind of HSS they are welding. As manufacturers use greater strength HSSs in welded structures, the demands for welding rise as well. Therefore, during the manufacturing process, factors such as heat input, cooling time, weld quality, and more must be under careful observation.

Cost-effectiveness analysis in South Karelia Central Hospital

The target organization of this study, otherwise South-Karelia Social and Health Care District (Eksote) provides health, senior, family and social welfare services. South Karelia Central Hospital provides special health care and offers health services from all of the most important medical specialties. Eksote has in use 15D instrument to measure the health-related quality of life (HRQoL) of their patients before and after their interventions for observing the health effects of the medical care. Furthermore, 15D allows measuring the effectiveness and cost-effectiveness of health care when comparing these before and after results of the 15D measurements and adding the costs of the interventions into this research. The main purposes of this study were to analyze the effectiveness and cost-effectiveness of medical care in South Karelia Central Hospital by using the gathered 15D data to calculate effectiveness and cost-effectiveness ratios and to analyze the reliability and availability of the data. Study has been conducted using literature review and quantitative research methods. The results indicate that from the patients within the eight units selected to this study the 15D change information was available from the 52 %, the 15D change and the cost information from 38 % and the information of quality-adjusted life years (QALYs) produced and the cost information from 35 %. The effectiveness and cost-effectiveness of medical care were greatest at the units of Pain Outpatient Clinic and Rheumatic Diseases Outpatient Clinic. The most effective medical care is given in the unit where the average price of one produced QALY is the highest (Orthopedics). However, the calculated standard deviations pointed out that there are great variances in the effectiveness and cost-effectiveness within the units also.

The ETH Zurich DOI Desk: DOIs as standard persistent identifier and best practice in Swiss Open Access repositories

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Adaptive control of Hydraulic Drive

Adaptive control systems are one of the most significant research directions of modern control theory. It is well known that every mechanical appliance’s behavior noticeably depends on environmental changes, functioning-mode parameter changes and changes in technical characteristics of internal functional devices. An adaptive controller involved in control process allows reducing an influence of such changes. In spite of this such type of control methods is applied seldom due to specifics of a controller designing. The work presented in this paper shows the design process of the adaptive controller built by Lyapunov’s function method for the Hydraulic Drive. The calculation needed and the modeling were conducting with MATLAB® software including Simulink® and Symbolic Math Toolbox™ etc. In the work there was applied the Jacobi matrix linearization of the object’s mathematical model and derivation of the suitable reference models based on Newton’s characteristic polynomial. The intelligent adaptive to nonlinearities algorithm for solving Lyapunov’s equation was developed. Developed algorithm works properly but considered plant is not met requirement of functioning with. The results showed confirmation that adaptive systems application significantly increases possibilities in use devices and might be used for correction a system’s behavior dynamics.

Vesiputkikattilan paineenalaisten osien lujuuslaskentaohjelman kehitys

Työssä kehitetään standardin EN 12952 mukaisille vesiputkikattiloiden paineenalaisille osille lujuuslaskentaohjelma. Lisäksi perehdytään putkisto-osien mitoituksen lujuusopilliseen pohjaan ja tarkastellaan vastaako standardin mitoitus sitä. Standardin EN 13480 mukaisille metallisille teollisuusputkistoille on kohdeyrityksellä käytössään mitoitusohjelma. Näin ollen työssä vertaillaan standardin EN 12952 ja EN 13480 mukaisia putkisto-osien mitoituksia. Vertailun perusteella selvitetään mitkä putkistokomponentit voidaan mitoittaa olemassa olevalla ohjelmalla. Joidenkin putkisto-osien mitoitus on standardeissa yhtenevä. Suunnittelujännitys määritetään kuitenkin eri tavalla kyseisissä standardeissa. Tämän takia kaikki yrityksen tarvitsemat putkistokomponentit ovat kirjattu kehitettyyn laskentaohjelmaan. Koska putkistokomponenttien mitoitus on yhtenevä monelta osin kyseisissä standardeissa, vertaillaan ohjelmien antamia tuloksia toisiinsa. Näin voidaan todeta kehitetty laskentaohjelma toimivaksi.

Collaborative Customer Relationship Management in Business-to-Business Firm's Strategy

The objective of this thesis is to study the presence of collaborative customer relationship management in a firm’s strategy. In addition the thesis explains specific implementations of collaborative CRM, and CRM in general, by each case company. The sample consists of five Finnish business-to-business companies through applying multiple-case study method. The data is collected through face-to-face interviews with employees knowledgeable of the case company’s CRM processes. The qualitative data is analyzed through coding and shows that two out of five case companies have adopted and are using collaborative CRM in their strategy and operations. These case companies see collaborative CRM as an important driver for the company, through customer focus and market orientation. The rest of the case companies are either in the process of moving towards collaborative CRM or have given little consideration to it. The results show that collaborative CRM is in use, and that each company modifies it to meet their exact aspirations. The major challenge in the process is to fully grasp the importance of a shared vision that can translate into collaborative efforts in CRM and business strategy.

Learning information technology business in a changing industry landscape. Introducing Team Entrepreneurship in Renewing Bachelor Education in Renewing Bachelor Education in Information

Speed, uncertainty and complexity are increasing in the business world all the time. When knowledge and skills become quickly irrelevant, new challenges are set for information technology (IT) education. Meta-learning skills – learning how to learn rapidly - and innovation skills have become more essential than single technologies or other specific issues. The drastic changes in the information and communications technology (ICT) sector have caused a need to reconsider how IT Bachelor education in Universities of Applied Sciences should be organized and employed to cope with the change. The objective of the study was to evaluate how a new approach to IT Bachelor education, the ICT entrepreneurship study path (ICT-ESP) fits IT Bachelor education in a Finnish University of Applied Sciences. This kind of educational arrangement has not been employed elsewhere in the context of IT Bachelor education. The study presents the results of a four-year period during which IT Bachelor education was renewed in a Finnish University of Applied Sciences. The learning environment was organized into an ICT-ESP based on Nonaka’s knowledge theory and Kolb’s experiental learning. The IT students who studied in the ICT-ESP established a cooperative and learned ICT by running their cooperative at the University of Applied Sciences. The students (called team entrepreneurs) studied by reading theory in books and other sources of explicit information, doing projects for their customers, and reflecting in training sessions on what was learnt by doing and by studying the literature. Action research was used as the research strategy in this study. Empirical data was collected via theme-based interviews, direct observation, and participative observation. Grounded theory method was utilized in the data analysis and the theoretical sampling was used to guide the data collection. The context of the University of Applied Sciences provided a good basis for fostering team entrepreneurship. However, the results showed that the employment of the ICT-ESP did not fit into the IT Bachelor education well enough. The ICT-ESP was cognitively too tough for the team entrepreneurs because they had two different set of rules to follow in their studies. The conventional courses engaged lot of energy which should have been spent for professional development in the ICT-ESP. The amount of competencies needed in the ICT-ESP for professional development was greater than those needed for any other ways of studying. The team entrepreneurs needed to develop skills in ICT, leadership and self-leadership, team development and entrepreneurship skills. The entrepreneurship skills included skills on marketing and sales, brand development, productization, and business administration. Considering the three-year time the team entrepreneurs spent in the ICT-ESP, the challenges were remarkable. Changes to the organization of IT Bachelor education are also suggested in the study. At first, it should be admitted that the ICT-ESP produces IT Bachelors with a different set of competencies compared to the conventional way of educating IT Bachelors. Secondly, the number of courses on general topics in mathematics, physics, and languages for team entrepreneurs studying in the ICTESP should be reconsidered and the conventional course-based teaching of the topics should be reorganized to support the team coaching process of the team entrepreneurs with their practiceoriented projects. Third, the upcoming team entrepreneurs should be equipped with relevant information about the ICT-ESP and what it would require in practice to study as a team entrepreneur. Finally, the upcoming team entrepreneurs should be carefully selected before they start in the ICT-ESP to have a possibility to eliminate solo players and those who have a too romantic view of being a team entrepreneur. The results gained in the study provided answers to the original research questions and the objectives of the study were met. Even though the IT degree programme was terminated during the research process, the amount of qualitative data gathered made it possible to justify the interpretations done.

Reduction of nitrogen oxide emissions in lime kiln

Different nitrogen oxide removal technologies for rotary lime kiln are studied in this thesis, the main focus being in commercial technologies. Post-combustion methods are investigated in more detail as potential possible NOx removal with combustion methods in rotary lime kiln is more limited or primary methods are already in use. However, secondary methods as NOx scrubber, SNCR or SCR technologies are not listed as the Best Available Technologies defined by European Union. BAT technologies for NOx removal in lime kiln are (1) Optimised combustion and combustion control, (2) Good mixing of fuel and air, (3) Low-NOx burner and (4) Fuel selection/low-N fuel. SNCR method is the most suitable technique for NOx removal in lime kiln when NOx removal from 50 % to 70 % is required in case primary methods are already in use or cannot be applied. In higher removal cases ammonia slip is an issue in SNCR. By using SCR better NOx reduction can be achieved but issues with catalyst materials are expected to arise because of the dust and sulphur dioxide which leads to catalyst poison formation in lower flue gas temperatures. NOx scrubbing has potential when simultaneous NOx and SO2 removal is required. The challenge is that NO cannot be scrubbed directly, but once it is oxidized to NO2 or further scrubbing can be performed as the solubility of NO2 is higher. Commercial installations have not been made regarding SNCR, SCR or NOx scrubbing regarding rotary lime kiln. For SNCR and SCR the closest references come from cement industry.

Teollinen öljyn erotus koalesenssisuodatuksella väliaineessa

Koalesenssi on ilmiö, jossa dispergoidun faasin pisarat pyrkivät muodostamaan suurempia pisaroita kunnes erotettava faasi muodostuu. Koalesenssi tapahtuu kolmessa päävaiheessa, jotka ovat lähestyminen, kiinnittyminen ja irrotus. Lähestymiseen vaikuttavat mekanismit ovat muuan muassa sieppaus, diffuusio, törmäysvaikutus, sedimentaatio, sähköiset repul-siovoimat ja van der Waalsin voimat. Kiinnittymisvaiheessa dispergoidun faasin pisarat syrjäyttävät väliaineen nestekalvon samalla kostuttaen väliaineen pinnan. Irrotusvaiheessa pisaran hydrodynaaminen voima voittaa pisaran ja väliaineen välisen adheesiovoiman. Koalesenssin tehokkuuteen vaikuttavat useat eri parametrit kuten virtausnopeus, pedin ominaisuudet, väliaineen ominaisuudet sekä emulsion ominaisuudet. Nämä kaikki asiat tulee ottaa huomioon koalesenssisuodatuksen suunnittelussa. Koalesenssisuodatus lukeutuu syväsuodatusmenetelmiin, jotka on ollut käytössä jo yli 100 vuotta. Koalesenssisuodatusmenetelmä on tehokas menetelmä pienten pisaroiden erottami-seen. Menetelmää käytetään esimerkiksi öljyisten jätevesien puhdistuksessa. Teollisen öljyn syväsuodatuksen etuihin kuuluu muun muassa sen kompakti koko, alhaisemmat käyt-tökustannukset, korkea erotusaste, kyky erotella pienetkin pisarat sekä helppo operointi, automatisointi ja huolto. Suurin haittapuoli on kuitenkin väliaineen tukkeutuminen, joten prosessi vaatii puhdistuksen tai väliaineen uusimisen. Tämän kandidaatintyön tarkoituksena oli koota kirjallisuustyö öljyn koalesenssisuodatuk-sesta. Työssä kartoitettiin koalesenssisuodatuksen lähtökohdat, teoria, tärkeimmät teolli-suuden sovellukset sekä väliaineet.

Kevyen istutuskoneen suunnittelu puuntaimille

Työssä pyritään suunnittelemaan kevyempi versio jo olemassa olevasta puuntaimien istutuslaitteesta. Työ koostuu kahdesta osasta. Ensimmäisessä teoria osuudessa käydään läpi mekatronisen koneen suunnittelussa huomioitavia seikkoja ja järjestelmällistä tuotekehitysprosessia yleisesti. Toisessa osassa esitellään nykyisten istutuslaitteiden kehityshistoriaa ja nykyisin koneellisessa metsänistutuksessa käytössä olevia laitteita. Loppuratkaisujen aikaan saamisessa pyritään QFD-menetelmää käyttämällä saamaan aikaan kevyen istutuskoneen vaatimusprofiili ja profiilissa ilmi tulleiden vaatimusten ja toiveiden pohjalta kehitettiin ratkaisuja joilla perinteistä koneellista istutus toimintaa voidaan uudistaa. Materiaalinvalinnan avulla optimoitiin kevyttä istutuskonetta pyrkimällä löytämään ympäristöystävälliset materiaalit jotka ovat tuotteen elinkaarta kokonaisuutena ajatellen parhaat mahdolliset. Työssä saatiin aikaan malli jolla on mahdollista jatkokehittelyn jälkeen ja kunnolla tuotteistettuna edistää koneellisen metsänistutuksen yleistymistä. Työn aikana huomattiin, että suurimmat esteet metsän istutuksen koneellistumiselle ovat nykyisten koneiden korkeat hankinta- ja käyttökustannukset sekä koneiden käyttämisen vaatima ammattitaito. Kustannuksia alentamalla ja käyttökynnystä madaltamalla voi edistää koneellisen metsänistutuksen yleistymistä tehostamisen rinnalla.

Utilization of AMI-Technology in a Multilayered Demand Response Service Environment

This thesis studied the performance of Advanced metering infrastructure systems in a challenging Demand Response environment. The aim was to find out what kind of challenges and bottlenecks could be met when utilizing AMI-systems in challenging Demand Response tasks. To find out the challenges and bottlenecks, a multilayered demand response service concept was formed. The service consists of seven different market layers which consist of Nordic electricity market and the reserve markets of Fingrid. In the simulations the AMI-systems were benchmarked against these seven market layers. It was found out, that the current generation AMI-systems were capable of delivering Demand Response on the most challenging market layers, when observed from time critical viewpoint. Additionally, it was found out, that to enable wide scale Demand Response there are three major challenges to be acknowledged. The challenges hindering the utilization of wide scale Demand Response were related to poor standardization of the systems in use, possible problems in data connectivity solutions and the current electricity market regulation model.

Forming i barnehagen i lys av Reggio Emilias atelierkultur

Forming (Arts and crafts) and children’s creative action with materials and tools are less in use in the kindergarten than before. Political focus on children’s early learning has led to shifts in kindergartens toward other specific disciplines, and requirements for individual testing also of the smallest children’s competencies within these. Kindergarten teachers, educators, researchers and participants in social debate have pointed out that there are epistemological contradictions in descriptions of kindergarten quality as well as between current kindergarten policy documents and requirements for the kindergartens’ staff. Meanwhile, the content and methods in many kindergartens are inspired by practice and philosophy in the municipal kindergartens in Reggio Emilia, Italy. Correlation between kindergartens’ formingprojects and experiences from Reggio Emilia is actualized in particular through the workshop and the studio’s role in children’s learning processes. One starting point for the thesis’ problem area is a documented need for more knowledge about kindergarten’s educational content. The overarching goal of the thesis is to develop new knowledge about how learning takes place in kindergarten through examining the field of forming in kindergartens inspired by Reggio Emilia’s atelier culture. The thesis is theoretically anchored within pragmatism, and ties kindergarten’s aesthetic operations with materials and tools to socio-cultural perspective, social constructivism and post humanistic theory. The empirical material is obtained through a qualitative study with ethnography as methodological approach. The fieldwork is conducted in kindergarten, with two leading research questions: 1) How is atelierism perceived and unfolded in Norwegian Reggio Emilia-inspired kindergartens, and 2) how is forming perceived and unfolded in Norwegian Reggio Emilia-inspired kindergartens. A comprehensive and multifaceted material is analyzed, and the results are presented in the form of three themes: The physical environment, Relations and actions in interplay, and Expression forms and forms of expression. Each of these topics are supported by examples from kindergartens’ adult voices and the constructed empirical material. Insights into how learning takes place in the kindergarten subject of forming with inspiration from the Reggio Emilia atelier culture is discussed in the tension between educational philosophy, Nordic kindergarten tradition and neoliberal trends that kindergarten teachers must adhere to. Learning potentials in children’s opportunities for action in forming in light of the atelier appears in the results of the empirical study. The educational context described is characterized by experimental and playful actions where children’s sensations, curiosity and resistance are interacting with the identity of materials and tools. The results imply aesthetic, ethical, democratic and ecological reflections, which are also valid on a practical action level. The thesis contributes to description and understanding of kindergarten’ content and young children’s learning, the importance of atelier culture as inspiration for the kindergarten, and the further development of methodology and documentation of knowledge expressions.

Analyzing the Effects of the New Renewable Energy Policy in Russia on Investments into Wind, Solar and Small Hydro Power

This thesis presents an analysis of recently enacted Russian renewable energy policy based on capacity mechanism. Considering its novelty and poor coverage by academic literature, the aim of the thesis is to analyze capacity mechanism influence on investors’ decision-making process. The current research introduces a number of approaches to investment analysis. Firstly, classical financial model was built with Microsoft Excel® and crisp efficiency indicators such as net present value were determined. Secondly, sensitivity analysis was performed to understand different factors influence on project profitability. Thirdly, Datar-Mathews method was applied that by means of Monte Carlo simulation realized with Matlab Simulink®, disclosed all possible outcomes of investment project and enabled real option thinking. Fourthly, previous analysis was duplicated by fuzzy pay-off method with Microsoft Excel®. Finally, decision-making process under capacity mechanism was illustrated with decision tree. Capacity remuneration paid within 15 years is calculated individually for each RE project as variable annuity that guarantees a particular return on investment adjusted on changes in national interest rates. Analysis results indicate that capacity mechanism creates a real option to invest in renewable energy project by ensuring project profitability regardless of market conditions if project-internal factors are managed properly. The latter includes keeping capital expenditures within set limits, production performance higher than 75% of target indicators, and fulfilling localization requirement, implying producing equipment and services within the country. Occurrence of real option shapes decision-making process in the following way. Initially, investor should define appropriate location for a planned power plant where high production performance can be achieved, and lock in this location in case of competition. After, investor should wait until capital cost limit and localization requirement can be met, after that decision to invest can be made without any risk to project profitability. With respect to technology kind, investment into solar PV power plant is more attractive than into wind or small hydro power, since it has higher weighted net present value and lower standard deviation. However, it does not change decision-making strategy that remains the same for each technology type. Fuzzy pay-method proved its ability to disclose the same patterns of information as Monte Carlo simulation. Being effective in investment analysis under uncertainty and easy in use, it can be recommended as sufficient analytical tool to investors and researchers. Apart from described results, this thesis contributes to the academic literature by detailed description of capacity price calculation for renewable energy that was not available in English before. With respect to methodology novelty, such advanced approaches as Datar-Mathews method and fuzzy pay-off method are applied on the top of investment profitability model that incorporates capacity remuneration calculation as well. Comparison of effects of two different RE supporting schemes, namely Russian capacity mechanism and feed-in premium, contributes to policy comparative studies and exhibits useful inferences for researchers and policymakers. Limitations of this research are simplification of assumptions to country-average level that restricts our ability to analyze renewable energy investment region wise and existing limitation of the studying policy to the wholesale power market that leaves retail markets and remote areas without our attention, taking away medium and small investment into renewable energy from the research focus. Elimination of these limitations would allow creating the full picture of Russian renewable energy investment profile.

Enhancing business-to-business relationship through value co-creation in traditional business sector: A case of building services engineering

This study discusses the significance of having service as a business logic, and more specifically, how value co-creation can be seen as an enhancing phenomenon to business-to-business relationships in traditional business sector. The purpose of this study is to investigate how value cocreation can enhance a business-to-business relationship in the heating, ventilation and airconditioning (HVAC) industry of building services engineering, through three sub-objectives: to identify what is value in the industry, how value is co-created in the industry, and what is value in a business-to-business relationship in the industry. The theoretical part this study consists of academic knowledge and literature related to the concepts of value, value co-creation and business-to-business relationships. In order to research value co-creation and business-to-business relationships in HVAC industry of building services engineering both, metaphorical and conceptual thinking of service dominant (S-D) logic and more managerial approach of service logic (SL), contributed to the theoretical part of the study. The empirical research conducted for this study is based on seven semi-structured interviews, which constituted the holistic, qualitative single case study method chosen for the research. The data was collected in September 2014 from CEOs, managers and owners representing six building services engineering firms. The interviews were analysed with the help of transcriptions, role-ordered matrices and thematic networks. The findings of this study indicate that value in HVAC industry consists of client expertise and supplier expertise. The result of applying client expertise and supplier expertise to the business-to- business relationship is characterized as value-in-reputation, when continuity, interaction, learning and rapport of the business relationship are ensured. As a result, value co-creation in the industry consists of mutual and separate elements, which the client and the supplier apply in the process, in addition to proactive interaction. The findings of this study, together with the final framework, enhance the understanding of the connection existing between value co-creation and business-to-business relationship. The findings suggest that value in the HVAC industry is characterized by both value-in-use and value-inreputation. Value-in-reputation enhances the formation of value-in-use, and consequently, value cocreation enhances the business-to-business relationship. This study thus contributes to the existing knowledge on the concepts of value and value co-creation in business-to-business relationships.

Adherence to drug therapy in kidney disease

Non-adherence to drug therapy has not been extensively studied in patients with chronic kidney disease (CKD). The objective of the present study was to identify determinants of non-adherence to drug therapy in patients with CKD, not on dialysis. A prospective cohort study involving 149 patients was conducted over a period of 12 months. Adherence to drug therapy was evaluated by the self-report method at baseline and at 12 months. Patients who knew the type of drug(s) and the respective number of prescribed pills in use at the visit preceding the interview were considered to be adherent. Patients with cognitive decline were assessed by interviewing their caregivers. Mean patient age was 51 ± 16.7 years. Male patients predominated (60.4%). Univariate analysis performed at baseline showed that non-adherence was associated with older age, more pills taken per day, worse renal function, presence of coronary artery disease, and reliance on caregivers for the administration of their medications. In multivariate analysis, the factors that were significantly associated with non-adherence were daily use of more than 5 pills and drug administration by a caregiver. Longitudinal evaluation showed an increase in non-adherence over time. Medication non-adherence was lower (17.4%) at the baseline period of the study than after 1 year of the study (26.8%). Compared to the baseline period, the percentage of adherent patients who became non-adherent (22%) was lower than the percentage of non-adherent patients who became adherent (50%). In CKD patients not on dialysis, non-adherence was significantly associated with the number of pills taken per day and drug administration by third parties. Adherence is more frequent than non-adherence over time.