The judicious utilization of new technologies through authentic learning in higher education: A case study

Though technology holds significant promise for enhanced teaching and learning it is unlikely to meet this promise without a principled approach to course design. There is burgeoning discourse about the use of technological tools and models in higher education, but much of the discussion is fixed upon distance learning or technology based courses. This paper will develop and propose a balanced model for effective teaching and learning for “on campus” higher education, with particular emphasis on the opportunities for revitalisation available through the judicious utilisation of new technologies. It will explore the opportunities available for the creation of more authentic learning environments through the principled design. Finally it will demonstrate with a case study how these have come together enabling the creation of an effective and authentic learning environment for one pre-service teacher education course at the University of Queensland.

Envisioning innovation : the communication of technological change through graphic representation

Graphic depiction is an established method for academics to present concepts about theories of innovation. These expressions have been adopted by policy-makers, the media and businesses. However, there has been little research on the extent of their usage or effectiveness ex-academia. In addition, innovation theorists have ignored this area of study, despite the communication of information about innovation being acknowledged as a major determinant of success for corporate enterprise. The thesis explores some major themes in the theories of innovation and compares how graphics are used to represent them. The thesis examines the contribution of visual sociology and graphic theory to an investigation of a sample of graphics. The methodological focus is a modified content analysis. The following expressions are explored: check lists, matrices, maps and mapping in the management of innovation; models, flow charts, organisational charts and networks in the innovation process; and curves and cycles in the representation of performance and progress. The main conclusion is that academia is leading the way in usage as well as novelty. The graphic message is switching from prescription to description. The computerisation of graphics has created a major role for the information designer. It is recommended that use of the graphic representation of innovation should be increased in all domains, though it is conceded that its content and execution need to improve, too. Education of graphic 'producers', 'intermediaries' and 'consumers' will play a part in this, as will greater exploration of diversity, novelty and convention. Work has begun to tackle this and suggestions for future research are made.

Content-based VLE designs improve learning efficiency in constructivist statistics education

Background: We introduced a series of computer-supported workshops in our undergraduate statistics courses, in the hope that it would help students to gain a deeper understanding of statistical concepts. This raised questions about the appropriate design of the Virtual Learning Environment (VLE) in which such an approach had to be implemented. Therefore, we investigated two competing software design models for VLEs. In the first system, all learning features were a function of the classical VLE. The second system was designed from the perspective that learning features should be a function of the course's core content (statistical analyses), which required us to develop a specific-purpose Statistical Learning Environment (SLE) based on Reproducible Computing and newly developed Peer Review (PR) technology. Objectives: The main research question is whether the second VLE design improved learning efficiency as compared to the standard type of VLE design that is commonly used in education. As a secondary objective we provide empirical evidence about the usefulness of PR as a constructivist learning activity which supports non-rote learning. Finally, this paper illustrates that it is possible to introduce a constructivist learning approach in large student populations, based on adequately designed educational technology, without subsuming educational content to technological convenience. Methods: Both VLE systems were tested within a two-year quasi-experiment based on a Reliable Nonequivalent Group Design. This approach allowed us to draw valid conclusions about the treatment effect of the changed VLE design, even though the systems were implemented in successive years. The methodological aspects about the experiment's internal validity are explained extensively. Results: The effect of the design change is shown to have substantially increased the efficiency of constructivist, computer-assisted learning activities for all cohorts of the student population under investigation. The findings demonstrate that a content-based design outperforms the traditional VLE-based design. © 2011 Wessa et al.

Higher education for a sustainable world

Purpose: The paper aims to explore the nature and purpose of higher education (HE) in the twenty-first century, focussing on how it can help fashion a green knowledge-based economy by developing approaches to learning and teaching that are social, networked and ecologically sensitive. Design/methodology/approach: The paper presents a discursive analysis of the skills and knowledge requirements of an emerging green knowledge-based economy using a range of policy focussed and academic research literature. Findings: The business opportunities that are emerging as a more sustainable world is developed requires the knowledge and skills that can capture and move then forward but in a complex and uncertain worlds learning needs to non-linear, creative and emergent. Practical implications: Sustainable learning and the attributes graduates will need to exhibit are prefigured in the activities and learning characterising the work and play facilitated by new media technologies. Social implications: Greater emphasis is required in higher learning understood as the capability to learn, adapt and direct sustainable change requires interprofessional co-operation that must utlise the potential of new media technologies to enhance social learning and collective intelligence. Originality/value: The practical relationship between low-carbon economic development, social sustainability and HE learning is based on both normative criteria and actual and emerging projections in economic, technological and skills needs.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Who is really in charge of contemporary education? People and technologies in, against and beyond the neoliberal university

This article reflects on the position of people in, against and beyond information and communication technologies. Firstly, using Jandrić and Kuzmanić’s work on digital postcolonialism, Raymond Williams's work on residual and emergent cultures, and Deleuze and Guattari's insights into the dynamics between territorialization, de-territorialization and re-territorialization, it develops a theoretical framework for inquiry into the hybrid identity of the contemporary university. Then, through critical discourse analysis (CDA), the article moves on to analyse the ways in which technology discourse resides in the dominating ideology of technological determinism and co-opts with neoliberal agendas by omitting humans from explicit mention in UK policy documents. It shows that true counter-hegemonic practice against dominating social practices is possible only through reinvigorating the central position of human beings in regards to information and communication technologies. Within the developed theoretical framework, it seeks openings to intervene subversively into current relationships between technologies, people, and (higher) education, and to identify opportunities for building a non-determinist identity of the contemporary university that reaches beyond the single-minded logic of techno-scientific development. In the process, it situates Paulo Freire's insights into critical pedagogy in the context of the network society, and places the relationships between human beings, language and information and communication technologies amongst central questions of today's (higher) education and society at large.

The Automation of Adaptive Processes in the System of Distance Education and Knowledge Control

The article reveals a new technological approach to the creation of adaptive systems of distance learning and knowledge control. The use of the given technology helps to automate the learning process with the help of adaptive system. Developed with the help of the quantum approach of knowledge setting, a programming module-controller guarantees the support of students’ attention and the adaptation of the object language, and this helps to provide the effective interaction between learners and the learning system and to reach good results in the intensification of learning process.

Financial Education Through Mathematics and IT Curricula: Pocket Money Management

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2013

Tutorial on Computing: Technological Advances, Social Implications, Ethical and Legal Issues

Computing and information technology have made significant advances. The use of computing and technology is a major aspect of our lives, and this use will only continue to increase in our lifetime. Electronic digital computers and high performance communication networks are central to contemporary information technology. The computing applications in a wide range of areas including business, communications, medical research, transportation, entertainments, and education are transforming local and global societies around the globe. The rapid changes in the fields of computing and information technology also make the study of ethics exciting and challenging, as nearly every day, the media report on a new invention, controversy, or court ruling. This tutorial will explore a broad overview on the scientific foundations, technological advances, social implications, and ethical and legal issues related to computing. It will provide the milestones in computing and in networking, social context of computing, professional and ethical responsibilities, philosophical frameworks, and social, ethical, historical, and political implications of computer and information technology. It will outline the impact of the tremendous growth of computer and information technology on people, ethics and law. Political and legal implications will become clear when we analyze how technology has outpaced the legal and political arenas.

A review of Taiwan's technological five-year junior college mechanical engineering curriculum development: 1948 to 1994

Taiwan's technological five-year junior college (TFYJC) was founded in 1948 to train technicians to meet the demand coming from national construction. Site level professionals never were trained in curriculum development as this was under strict national control. The purpose of this study is to present an accurate narrative of Taiwan's TFYJC mechanical engineering curriculum development history in order to display the focus, rationale, and influencing forces of the evolving curriculum. This study employed historical research methodology and used document analysis as the primary approach.^ This analysis revealed that the target FYJC curriculum was manufacturing-oriented. The range of government control shifted from little, to full, then to partial control of the curriculum, from autonomy to uniformity then to partial autonomy. The intention of the target curriculum development was always to advance domestic economic development. Voices from the academia and government also influenced curriculum development decisions. Currently, the government has instituted a shift in focus and content causing individual institutions to develop curriculum responses addressing the challenge of advancing Taiwan's position in a global economy.^ Considering the shift in policy and practice, individual institutions intending to design curriculum are advised to implement empirical needs assessments of students, graduates, and employers and to engage in critical studies of emerging resources in order to provide effective in service training. To accomplish this end, TFYJC faculty and administration need training in curriculum theory and practice and evaluation. ^

Self-directed Learning in the Technological Age

Concerns arising out of technology often being used as an add-on to self-directed learning practices in the workplace and factors affecting such learning were investigated through a literature analysis. What is needed is an exploration of new possibilities of computational media on how self-directed learners think, create and learn.

Advances in Hospitality Education: Courseware, Audiographics, and Cyberspace

Technology will play an increasingly larger role in the education of students within the hospitality curriculum. There are a significant number of emerging educational technologies aimed at changing the delivery of the entire curriculum. The development of technological platforms for multimedia instructional courseware, distance learning through audiographics, and virtual reality simulation are expected to alter and enhance the learning process while extending the boundaries of the traditional hospitality classroom.

Globalization and the public provision of higher education: Empirical evidence from selected countries

This research study was designed to examine the relationship between globalization as measured by the KOF index, its related forces (economic, political, cultural and technological) and the public provision of higher education. This study is important since globalization is increasingly being associated with changes in critical aspects of higher education. The public provision of education was measured by government expenditure and educational outcomes; that is participation, gender equity and attainment. The study utilized a non-experimental quantitative research design. Data collected from secondary sources for 139 selected countries was analyzed. The countries were geographically distributed and included both developed and developing countries. The choice of countries for inclusion in the study was based on data availability. The data, which was sourced from international organizations such as the United Nations and the World Bank, were examined for different time periods using five year averages. The period covered was 1970 to 2009.^ The relationship between globalization and the higher education variables was examined using cross sectional regression analysis while controlling for economic, political and demographic factors. The major findings of the study are as follows. For the two spending models, only one revealed a significant relationship between globalization and education with the R 2 s ranging from .222 to .448 over the period. This relationship was however negative indicating that as globalization increased, spending on higher education declined. However, for the education outcomes models, this relationship was not significant. For the sub-indices of globalization, only the political dimension showed significance as shown in the spending model. Political globalization was significant for six periods with R2 s ranging from .31 to .52.^ The study concluded that the results are mixed for both the spending and outcome models. It also found no robust effects of globalization on government education provision. This finding is not surprising given the existing literature which sees mixed results on the social impact of globalization.^