Some past decision theory models for euro construction model codes and for road drainage in Spain, and modest hints with multi-criteria methods for agro and environmental assurance

The authors are from UPM and are relatively grouped, and all have intervened in different academic or real cases on the subject, at different times as being of different age. With precedent from E. Torroja and A. Páez in Madrid Spain Safety Probabilistic models for concrete about 1957, now in ICOSSAR conferences, author J.M. Antón involved since autumn 1967 for euro-steel construction in CECM produced a math model for independent load superposition reductions, and using it a load coefficient pattern for codes in Rome Feb. 1969, practically adopted for European constructions, giving in JCSS Lisbon Feb. 1974 suggestion of union for concrete-steel-al.. That model uses model for loads like Gumbel type I, for 50 years for one type of load, reduced to 1 year to be added to other independent loads, the sum set in Gumbel theories to 50 years return period, there are parallel models. A complete reliability system was produced, including non linear effects as from buckling, phenomena considered somehow in actual Construction Eurocodes produced from Model Codes. The system was considered by author in CEB in presence of Hydraulic effects from rivers, floods, sea, in reference with actual practice. When redacting a Road Drainage Norm in MOPU Spain an optimization model was realized by authors giving a way to determine the figure of Return Period, 10 to 50 years, for the cases of hydraulic flows to be considered in road drainage. Satisfactory examples were a stream in SE of Spain with Gumbel Type I model and a paper of Ven Te Chow with Mississippi in Keokuk using Gumbel type II, and the model can be modernized with more varied extreme laws. In fact in the MOPU drainage norm the redacting commission acted also as expert to set a table of return periods for elements of road drainage, in fact as a multi-criteria complex decision system. These precedent ideas were used e.g. in wide Codes, indicated in symposia or meetings, but not published in journals in English, and a condensate of contributions of authors is presented. The authors are somehow involved in optimization for hydraulic and agro planning, and give modest hints of intended applications in presence of agro and environment planning as a selection of the criteria and utility functions involved in bayesian, multi-criteria or mixed decision systems. Modest consideration is made of changing in climate, and on the production and commercial systems, and on others as social and financial.

Electronic damage in quartz (c-SiO2) by MeV ion irradiations: Potentiality for optical waveguiding applications

The damage induced on quartz (c-SiO2) by heavy ions (F, O, Br) at MeV energies, where electronic stopping is dominant, has been investigated by RBS/C and optical methods. The two techniques indicate the formation of amorphous layers with an isotropic refractive index (n = 1.475) at fluences around 1014 cm−2 that are associated to electronic mechanisms. The kinetics of the process can be described as the superposition of linear (possibly initial Poisson curve) and sigmoidal (Avrami-type) contributions. The coexistence of the two kinetic regimes may be associated to the differential roles of the amorphous track cores and preamorphous halos. By using ions and energies whose maximum stopping power lies inside the crystal (O at 13 MeV, F at 15 MeV and F at 30 MeV) buried amorphous layer are formed and optical waveguides at the sample surface have been generated.

Asymptotic Description of Flutter Amplitude Saturation by Nonlinear Friction Forces

The computation of the non-linear vibration dynamics of an aerodynamically unstable bladed-disk is a formidable numerical task, even for the simplified case of aerodynamic forces assumed to be linear. The nonlinear friction forces effectively couple dif- ferent travelling waves modes and, in order to properly elucidate the dynamics of the system, large time simulations are typically required to reach a final, saturated state. Despite of all the above complications, the output of the system (in the friction microslip regime) is basically a superposition of the linear aeroelastic un- stable travelling waves, which exhibit a slow time modulation that is much longer than the elastic oscillation period. This slow time modulation is due to both, the small aerodynamic effects and the small nonlinear friction forces, and it is crucial to deter- mine the final amplitude of the flutter vibration. In this presenta- tion we apply asymptotic techniques to obtain a new simplified model that captures the slow time dynamics of the amplitudes of the travelling waves. The resulting asymptotic model is very re- duced and extremely cheap to simulate, and it has the advantage that it gives precise information about the characteristics of the nonlinear friction models that actually play a role in the satura- tion of the vibration amplitude.

Asymptotic Description of Flutter Amplitude Saturation by Nonlinear Friction Forces

The computation of the non-linear vibration dynamics of an aerodynamically unstable bladed-disk is a formidable numerical task, even for the simplified case of aerodynamic forces assumed to be linear. The nonlinear friction forces effectively couple dif- ferent travelling waves modes and, in order to properly elucidate the dynamics of the system, large time simulations are typically required to reach a final, saturated state. Despite of all the above complications, the output of the system (in the friction microslip regime) is basically a superposition of the linear aeroelastic un- stable travelling waves, which exhibit a slow time modulation that is much longer than the elastic oscillation period. This slow time modulation is due to both, the small aerodynamic effects and the small nonlinear friction forces, and it is crucial to deter- mine the final amplitude of the flutter vibration. In this presenta- tion we apply asymptotic techniques to obtain a new simplified model that captures the slow time dynamics of the amplitudes of the travelling waves. The resulting asymptotic model is very re- duced and extremely cheap to simulate, and it has the advantage that it gives precise information about the characteristics of the nonlinear friction models that actually play a role in the satura- tion of the vibration amplitude.

La planta Miralles: representación y pensamiento en la arquitectura de Enric Miralles

Resulta imposible disociar la evolución de la arquitectura de Enric Miralles de lo que fue el desarrollo de un sistema de representación propio. Partiendo de una posición heredada de su formación en la Escuela de Arquitectura de Barcelona y de su práctica en el estudio Viaplana-Piñón, donde adquiere el gusto por la precisión en el dibujo técnico, la delineación sobre papel vegetal o el grafismo constituido exclusivamente a base de líneas del mismo grosor, Miralles pronto evoluciona hacia un método caracterizado por un personal uso del sistema diédrico, vinculado a una concepción fragmentaria de la planta de arquitectura y del espacio mismo. Miralles proyectará por fragmentos de planta, asignándoles una geometría característica para diferenciarlos entre sí y desarrollar su espacialidad y sección con cierta autonomía, a través de planos y maquetas independientes. Gran parte de la arquitectura que elabora con Carme Pinós, en solitario o con Benedetta Tagliabue, estará compuesta por colecciones de piezas heterogéneas herederas de los fragmentos de la planta original, que encajan entre sí no en base a esquemas clásicos de integración subordinada o jerárquica, sino a través de posiciones relativas de yuxtaposición o superposición, caracterizadas por una ausencia de compacidad en la solución de conjunto. Este sistema de representación se apoya por tanto en la geometría como mecanismo de diferenciación por piezas, se basa en la fragmentación del diédrico desde la fragmentación de la planta, y en la falta de compacidad como soporte de pensamiento separativo. Un sistema que se define como “planta Miralles”, término que incluye todas las técnicas de representación empleadas por el arquitecto, desde planos a maquetas, pero que enfatiza la importancia estratégica de la planta como origen y guía del proyecto de arquitectura. La tesis se estructura en los tres primeros capítulos como un corolario de las categorías enunciadas, explicando, en orden cronológico a través de los proyectos, la evolución de la geometría, la utilización del diédrico, y el impacto de la falta de compacidad en la obra construida. Mientras que estos capítulos son globales, se refieren a la trayectoria de este método en su totalidad, el cuarto y último es un estudio de detalle de su aplicación en un proyecto particular, el Ayuntamiento de Utrecht, a través de los dibujos originales de Miralles. Tanto en la explicación global como en el estudio de detalle de este sistema de representación, la tesis pone de manifiesto su instrumentalidad en el pensamiento de esta arquitectura, argumentando que ésta no podría haber sido desarrollada sin la existencia del mismo. La relación entre representación y pensamiento es por tanto un tema capital para explicar esta obra. No obstante, hasta la fecha, las referencias al mismo en la bibliografía disponible no han pasado de ser una colección de opiniones dispersas, incapaces de construir por sí mismas un cuerpo estructurado y coherente de conocimiento. Se ha insistido sobremanera en el análisis y contextualización de los proyectos individuales, y poco en el estudio de la técnica proyectual utilizada para pensarlos y llevarlos a cabo. En definitiva, se han priorizado los resultados frente a los procesos creativos, existiendo por tanto un inexplicable vacío teórico respecto a un tema de gran importancia. Este vacío es el marco donde se inserta la necesidad de esta tesis doctoral. La investigación que aquí se presenta explica el origen y evolución del sistema de representación de Enric Miralles, desde su etapa como estudiante en la Escuela de Arquitectura de Barcelona hasta los últimos proyectos que elabora con Benedetta Tagliabue, así como el estudio de sus consecuencias en la obra construida. Termina concluyendo que su desarrollo es paralelo al de la arquitectura de Miralles, poniendo de manifiesto su vinculación y mutua interdependencia. ABSTRACT It is impossible to dissociate the evolution of the architecture of Enric Miralles from the development of his own system of representation. Starting from a position inherited from his training at the Barcelona School of Architecture and his practice at the office of Viaplana-Piñón, where he acquires a liking for precision in drafting and a graphic style based exclusively on lines of the same thickness, Miralles soon moves into a method defined by a customized use of the dihedral system, connected to a fragmented conception of the floorplan and space itself. Breaking up the floorplan into multiple fragments, Miralles will design an architecture where each of them has a unique shape and geometry, developing their sections and spatial qualities with a certain degree of autonomy within the whole, through separate plans and models. Many of the projects he designs with Carme Pinós, individually or with Benedetta Tagliabue, will consist of collections of heterogeneous pieces, heirs of the original floorplan fragments, which do not fit together according to classical principles of subordinate or hierarchical integration, but based on relative positions of juxtaposition or superposition that lead to a lack of compactness in the overall scheme. This system of representation is thus based on the use of geometry as a way of differentiating architectural pieces, on the fragmentation of the dihedral system from the fragmentation of the floorplan, and on a lack of compactness as a device of separative thinking. This system is defined as “Miralles plan”, a term that includes all techniques of representation used by the architect, from plans to models, and that emphasizes the particular importance of the floorplan as the guiding force of the design process. The first three chapters of the thesis have been structured as a corollary of these categories, explaining, in chronological order through Miralles’ projects, the evolution of geometry, the customization of the dihedral system, and the impact of the lack of compactness on the built work. While these three chapters are global, for they refer to the overall evolution of this system, the fourth and last one is a case study of its application to a particular project, the Utrecht Town Hall, through Miralles’ original drawings. Both in the global and particular explanations of this system of representation, the thesis highlights its instrumentality in the process of thinking this architecture, arguing that it could not have been designed without its parallel development. The relationship between thinking and representation is therefore a key issue to explain this architecture. However, to date, existing references to it in the available literature have not evolved from a collection of scattered opinions, unable to build for themselves a structured and coherent body of knowledge. Great emphasis has been put on the critical contextualization of this architecture through the analysis of the projects themselves, but little on the study of the design technique used to think and carry them out. Results have been prioritized over creative processes, existing therefore an inexplicable theoretical void on an issue of great importance. This void is the conceptual framework where the need for this thesis is inserted. This research explains the origin and evolution of Enric Miralles’ system of representation, from his time as student at the Barcelona School of Architecture to the last projects he designed with Benedetta Tagliabue, as well as the study of its impact on the built work. It concludes that the development of this system runs parallel to that of the architecture it is used for, making it explicit its indissolubility and mutual interdependence.

Coastal floods and decadal changes: the climate factor

Observation has widely shown for nearly all last century that the Spanish (Dynamic) Maritime Climate was following around 10 to 11 year cycles in its most significant figure, wind wave, despite it being better to register cycles of 20 to 22 years, in analogical way with the semi-diurnal and diurnal cycles of Cantabrian tides. Those cycles were soon linked to sun activity and, at the end of the century, the latter was related to the Solar System evolution. We know now that waves and storm surges are coupled and that (Dynamic) Maritime Climate forms part of a more complex “Thermal Machine” including Hydrological cycle. The analysis of coastal floods could so facilitate the extension of that experience. According to their immediate cause, simple flood are usually sorted out into flash, pluvial, fluvial, groundwater and coastal types, considering the last as caused by sea waters. But the fact is that most of coastal floods are the result of the concomitance of several former simple types. Actually, the several Southeastern Mediterranean coastal flood events show to be the result of the superposition within the coastal zone of flash, fluvial, pluvial and groundwater flood types under boundary condition imposed by the concomitant storm sea level rise. This work shall be regarded as an attempt to clarify that cyclic experience, through an in-depth review of a past flood events in Valencia (Turia and Júcar basins), as in Murcia (Segura’s) as well.

Aportación de técnicas geoespaciales para la determinación de los niveles de referencia de la deforestación y la degradación de bosques en el ámbito de proyectos REDD. análisis de factores de causalidad subyacentes y directos

La pérdida de bosques en la Tierra, principalmente en ecosistemas amazónicos, es un factor clave en el proceso del cambio climático. Para revertir esta situación, los mecanismos REDD (Reducing Emission from Deforestation and forest Degradation) están permitiendo la implementación de actividades de protección del clima a través de la reducción de emisiones por deforestación evitada, según los esquemas previstos en el Protocolo de Kioto. El factor técnico más crítico en un proyecto REDD es la determinación de la línea de referencia de emisiones, que define la expectativa futura sobre las emisiones de CO2 de origen forestal en ausencia de esfuerzos adicionales obtenidos como consecuencia de la implementación del programa REDD para frenar este tipo de emisiones. La zona del estudio se ubica en la región de San Martín (Perú), provincia cubierta fundamentalmente por bosques tropicales cuyas tasas de deforestación son de las más altas de la cuenca amazónica. En las últimas décadas del siglo XX, la región empezó un acelerado proceso de deforestación consecuencia de la integración vial con el resto del país y la rápida inmigración desde zonas rurales en busca de nuevas tierras agrícolas. Desde el punto de vista de la investigación llevada a cabo en la tesis doctoral, se pueden destacar dos líneas: 1. El estudio multitemporal mediante imágenes de satélite Landsat 5/TM con el propósito de calcular las pérdidas de bosque entre períodos. El estudio multitemporal se llevó a cabo en el período 1998-2011 utilizando imágenes Landsat 5/TM, aplicando la metodología de Análisis de Mezclas Espectrales (Spectral Mixtures Analysis), que permite descomponer la reflectancia de cada píxel de la imagen en diferentes fracciones de mezcla espectral. En este proceso, las etapas más críticas son el establecimiento de los espectros puros o endemembers y la recopilación de librerías espectrales adecuadas, en este caso de bosques tropicales, que permitan reducir la incertidumbre de los procesos. Como resultado de la investigación se ha conseguido elaborar la línea de referencia de emisiones histórica, para el período de estudio, teniendo en cuenta tanto los procesos de deforestación como de degradación forestal. 2. Relacionar los resultados de pérdida de bosque con factores de causalidad directos e indirectos. La determinación de los procesos de cambio de cobertura forestal utilizando técnicas geoespaciales permite relacionar, de manera significativa, información de los indicadores causales de dichos procesos. De igual manera, se pueden estimar escenarios futuros de deforestación y degradación de acuerdo al análisis de la evolución de dichos vectores, teniendo en cuenta otros factores indirectos o subyacentes, como pueden ser los económicos, sociales, demográficos y medioambientales. La identificación de los agentes subyacentes o indirectos es una tarea más compleja que la de los factores endógenos o directos. Por un lado, las relaciones causa – efecto son mucho más difusas; y, por otro, los efectos pueden estar determinados por fenómenos más amplios, consecuencia de superposición o acumulación de diferentes causas. A partir de los resultados de pérdida de bosque obtenidos mediante la utilización de imágenes Landsat 5/TM, se investigaron los criterios de condicionamiento directos e indirectos que podrían haber influido en la deforestación y degradación forestal en ese período. Para ello, se estudiaron las series temporales, para las mismas fechas, de 9 factores directos (infraestructuras, hidrografía, temperatura, etc.) y 196 factores indirectos (económicos, sociales, demográficos y ambientales, etc.) con, en principio, un alto potencial de causalidad. Finalmente se ha analizado la predisposición de cada factor con la ocurrencia de deforestación y degradación forestal por correlación estadística de las series temporales obtenidas. ABSTRACT Forests loss on Earth, mainly in Amazonian ecosystems, is a key factor in the process of climate change. To reverse this situation, the REDD (Reducing Emission from Deforestation and forest Degradation) are allowing the implementation of climate protection activities through reducing emissions from avoided deforestation, according to the schemes under the Kyoto Protocol. Also, the baseline emissions in a REDD project defines a future expectation on CO2 emissions from deforestation and forest degradation in the absence of additional efforts as a result of REDD in order to stop these emissions. The study area is located in the region of San Martín (Peru), province mainly covered by tropical forests whose deforestation rates are the highest in the Amazon basin. In the last decades of the twentieth century, the region began an accelerated process of deforestation due to road integration with the rest of the country and the rapid migration from rural areas for searching of new farmland. From the point of view of research in the thesis, we can highlight two lines: 1. The multitemporal study using Landsat 5/TM satellite images in order to calculate the forest loss between periods. The multitemporal study was developed in the period 1998-2011 using Landsat 5/TM, applying the methodology of Spectral Mixture Analysis, which allows decomposing the reflectance of each pixel of the image in different fractions of mixture spectral. In this process, the most critical step is the establishment of pure spectra or endemembers spectra, and the collecting of appropriate spectral libraries, in this case of tropical forests, to reduce the uncertainty of the process. As a result of research has succeeded in developing the baseline emissions for the period of study, taking into account both deforestation and forest degradation. 2. Relate the results of forest loss with direct and indirect causation factors. Determining the processes of change in forest cover using geospatial technologies allows relating, significantly, information of the causal indicators in these processes. Similarly, future deforestation and forest degradation scenarios can be estimated according to the analysis of the evolution of these drivers, taking into account other indirect or underlying factors, such as economic, social, demographic and environmental. Identifying the underlying or indirect agents is more complex than endogenous or direct factors. On the one hand, cause - effect relationships are much more diffuse; and, second, the effects may be determined by broader phenomena, due to superposition or accumulation of different causes. From the results of forest loss obtained using Landsat 5/TM, the criteria of direct and indirect conditioning that might have contributed to deforestation and forest degradation in that period were investigated. For this purpose, temporal series, for the same dates, 9 direct factors (infrastructure, hydrography, temperature, etc.) and 196 underlying factors (economic, social, demographic and environmental) with, in principle, a high potential of causality. Finally it was analyzed the predisposition of each factor to the occurrence of deforestation and forest degradation by statistical correlation of the obtained temporal series.

Comparative theoretical analysis between parallel and perpendicular geometries for 2D particle patterning in photovoltaic ferroelectric substrates

This paper describes the dielectrophoretic potential created by the evanescent electric field acting on a particle near a photovoltaic crystal surface depending on the crystal cut. This electric field is obtained from the steady state solution of the Kukhtarev equations for the photovoltaic effect, where the diffusion term has been disregarded. First, the space charge field generated by a small, square, light spot where d _ l (being d a side of the square and l the crystal thickness) is studied. The surface charge density generated in both geometries is calculated and compared as their relation determines the different properties of the dielectrophoretic potential for both cuts. The shape of the dielectrophoretic potential is obtained and compared for several distances to the sample. Afterwards other light patterns are studied by the superposition of square spots, and the resulting trapping profiles are analysed. Finally the surface charge densities and trapping profiles for different d/l relations are studied.

Modelos de elementos finitos explícitos para explosiones en estructuras reticuladas de hormigón armado : aplicaciones al estudio del colapso de edificios

La frecuencia con la que se producen explosiones sobre edificios, ya sean accidentales o intencionadas, es reducida, pero sus efectos pueden ser catastróficos. Es deseable poder predecir de forma suficientemente precisa las consecuencias de estas acciones dinámicas sobre edificaciones civiles, entre las cuales las estructuras reticuladas de hormigón armado son una tipología habitual. En esta tesis doctoral se exploran distintas opciones prácticas para el modelado y cálculo numérico por ordenador de estructuras de hormigón armado sometidas a explosiones. Se emplean modelos numéricos de elementos finitos con integración explícita en el tiempo, que demuestran su capacidad efectiva para simular los fenómenos físicos y estructurales de dinámica rápida y altamente no lineales que suceden, pudiendo predecir los daños ocasionados tanto por la propia explosión como por el posible colapso progresivo de la estructura. El trabajo se ha llevado a cabo empleando el código comercial de elementos finitos LS-DYNA (Hallquist, 2006), desarrollando en el mismo distintos tipos de modelos de cálculo que se pueden clasificar en dos tipos principales: 1) modelos basados en elementos finitos de continuo, en los que se discretiza directamente el medio continuo mediante grados de libertad nodales de desplazamientos; 2) modelos basados en elementos finitos estructurales, mediante vigas y láminas, que incluyen hipótesis cinemáticas para elementos lineales o superficiales. Estos modelos se desarrollan y discuten a varios niveles distintos: 1) a nivel del comportamiento de los materiales, 2) a nivel de la respuesta de elementos estructurales tales como columnas, vigas o losas, y 3) a nivel de la respuesta de edificios completos o de partes significativas de los mismos. Se desarrollan modelos de elementos finitos de continuo 3D muy detallados que modelizan el hormigón en masa y el acero de armado de forma segregada. El hormigón se representa con un modelo constitutivo del hormigón CSCM (Murray et al., 2007), que tiene un comportamiento inelástico, con diferente respuesta a tracción y compresión, endurecimiento, daño por fisuración y compresión, y rotura. El acero se representa con un modelo constitutivo elastoplástico bilineal con rotura. Se modeliza la geometría precisa del hormigón mediante elementos finitos de continuo 3D y cada una de las barras de armado mediante elementos finitos tipo viga, con su posición exacta dentro de la masa de hormigón. La malla del modelo se construye mediante la superposición de los elementos de continuo de hormigón y los elementos tipo viga de las armaduras segregadas, que son obligadas a seguir la deformación del sólido en cada punto mediante un algoritmo de penalización, simulando así el comportamiento del hormigón armado. En este trabajo se denominarán a estos modelos simplificadamente como modelos de EF de continuo. Con estos modelos de EF de continuo se analiza la respuesta estructural de elementos constructivos (columnas, losas y pórticos) frente a acciones explosivas. Asimismo se han comparado con resultados experimentales, de ensayos sobre vigas y losas con distintas cargas de explosivo, verificándose una coincidencia aceptable y permitiendo una calibración de los parámetros de cálculo. Sin embargo estos modelos tan detallados no son recomendables para analizar edificios completos, ya que el elevado número de elementos finitos que serían necesarios eleva su coste computacional hasta hacerlos inviables para los recursos de cálculo actuales. Adicionalmente, se desarrollan modelos de elementos finitos estructurales (vigas y láminas) que, con un coste computacional reducido, son capaces de reproducir el comportamiento global de la estructura con una precisión similar. Se modelizan igualmente el hormigón en masa y el acero de armado de forma segregada. El hormigón se representa con el modelo constitutivo del hormigón EC2 (Hallquist et al., 2013), que también presenta un comportamiento inelástico, con diferente respuesta a tracción y compresión, endurecimiento, daño por fisuración y compresión, y rotura, y se usa en elementos finitos tipo lámina. El acero se representa de nuevo con un modelo constitutivo elastoplástico bilineal con rotura, usando elementos finitos tipo viga. Se modeliza una geometría equivalente del hormigón y del armado, y se tiene en cuenta la posición relativa del acero dentro de la masa de hormigón. Las mallas de ambos se unen mediante nodos comunes, produciendo una respuesta conjunta. En este trabajo se denominarán a estos modelos simplificadamente como modelos de EF estructurales. Con estos modelos de EF estructurales se simulan los mismos elementos constructivos que con los modelos de EF de continuo, y comparando sus respuestas estructurales frente a explosión se realiza la calibración de los primeros, de forma que se obtiene un comportamiento estructural similar con un coste computacional reducido. Se comprueba que estos mismos modelos, tanto los modelos de EF de continuo como los modelos de EF estructurales, son precisos también para el análisis del fenómeno de colapso progresivo en una estructura, y que se pueden utilizar para el estudio simultáneo de los daños de una explosión y el posterior colapso. Para ello se incluyen formulaciones que permiten considerar las fuerzas debidas al peso propio, sobrecargas y los contactos de unas partes de la estructura sobre otras. Se validan ambos modelos con un ensayo a escala real en el que un módulo con seis columnas y dos plantas colapsa al eliminar una de sus columnas. El coste computacional del modelo de EF de continuo para la simulación de este ensayo es mucho mayor que el del modelo de EF estructurales, lo cual hace inviable su aplicación en edificios completos, mientras que el modelo de EF estructurales presenta una respuesta global suficientemente precisa con un coste asumible. Por último se utilizan los modelos de EF estructurales para analizar explosiones sobre edificios de varias plantas, y se simulan dos escenarios con cargas explosivas para un edificio completo, con un coste computacional moderado. The frequency of explosions on buildings whether they are intended or accidental is small, but they can have catastrophic effects. Being able to predict in a accurate enough manner the consequences of these dynamic actions on civil buildings, among which frame-type reinforced concrete buildings are a frequent typology is desirable. In this doctoral thesis different practical options for the modeling and computer assisted numerical calculation of reinforced concrete structures submitted to explosions are explored. Numerical finite elements models with explicit time-based integration are employed, demonstrating their effective capacity in the simulation of the occurring fast dynamic and highly nonlinear physical and structural phenomena, allowing to predict the damage caused by the explosion itself as well as by the possible progressive collapse of the structure. The work has been carried out with the commercial finite elements code LS-DYNA (Hallquist, 2006), developing several types of calculation model classified in two main types: 1) Models based in continuum finite elements in which the continuous medium is discretized directly by means of nodal displacement degrees of freedom; 2) Models based on structural finite elements, with beams and shells, including kinematic hypothesis for linear and superficial elements. These models are developed and discussed at different levels: 1) material behaviour, 2) response of structural elements such as columns, beams and slabs, and 3) response of complete buildings or significative parts of them. Very detailed 3D continuum finite element models are developed, modeling mass concrete and reinforcement steel in a segregated manner. Concrete is represented with a constitutive concrete model CSCM (Murray et al., 2007), that has an inelastic behaviour, with different tension and compression response, hardening, cracking and compression damage and failure. The steel is represented with an elastic-plastic bilinear model with failure. The actual geometry of the concrete is modeled with 3D continuum finite elements and every and each of the reinforcing bars with beam-type finite elements, with their exact position in the concrete mass. The mesh of the model is generated by the superposition of the concrete continuum elements and the beam-type elements of the segregated reinforcement, which are made to follow the deformation of the solid in each point by means of a penalty algorithm, reproducing the behaviour of reinforced concrete. In this work these models will be called continuum FE models as a simplification. With these continuum FE models the response of construction elements (columns, slabs and frames) under explosive actions are analysed. They have also been compared with experimental results of tests on beams and slabs with various explosive charges, verifying an acceptable coincidence and allowing a calibration of the calculation parameters. These detailed models are however not advised for the analysis of complete buildings, as the high number of finite elements necessary raises its computational cost, making them unreliable for the current calculation resources. In addition to that, structural finite elements (beams and shells) models are developed, which, while having a reduced computational cost, are able to reproduce the global behaviour of the structure with a similar accuracy. Mass concrete and reinforcing steel are also modeled segregated. Concrete is represented with the concrete constitutive model EC2 (Hallquist et al., 2013), which also presents an inelastic behaviour, with a different tension and compression response, hardening, compression and cracking damage and failure, and is used in shell-type finite elements. Steel is represented once again with an elastic-plastic bilineal with failure constitutive model, using beam-type finite elements. An equivalent geometry of the concrete and the steel is modeled, considering the relative position of the steel inside the concrete mass. The meshes of both sets of elements are bound with common nodes, therefore producing a joint response. These models will be called structural FE models as a simplification. With these structural FE models the same construction elements as with the continuum FE models are simulated, and by comparing their response under explosive actions a calibration of the former is carried out, resulting in a similar response with a reduced computational cost. It is verified that both the continuum FE models and the structural FE models are also accurate for the analysis of the phenomenon of progressive collapse of a structure, and that they can be employed for the simultaneous study of an explosion damage and the resulting collapse. Both models are validated with an experimental full-scale test in which a six column, two floors module collapses after the removal of one of its columns. The computational cost of the continuum FE model for the simulation of this test is a lot higher than that of the structural FE model, making it non-viable for its application to full buildings, while the structural FE model presents a global response accurate enough with an admissible cost. Finally, structural FE models are used to analyze explosions on several story buildings, and two scenarios are simulated with explosive charges for a full building, with a moderate computational cost.

Global instability analysis and control of three-dimensional long open cavity flow

The three-dimensional wall-bounded open cavity may be considered as a simplified geometry found in industrial applications such as leading gear or slotted flats on the airplane. Understanding the three-dimensional complex flow structure that surrounds this particular geometry is therefore of major industrial interest. At the light of the remarkable former investigations in this kind of flows, enough evidences suggest that the lateral walls have a great influence on the flow features and hence on their instability modes. Nevertheless, even though there is a large body of literature on cavity flows, most of them are based on the assumption that the flow is two-dimensional and spanwise-periodic. The flow over realistic open cavity should be considered. This thesis presents an investigation of three-dimensional wall-bounded open cavity with geometric ratio 6:2:1. To this aim, three-dimensional Direct Numerical Simulation (DNS) and global linear instability have been performed. Linear instability analysis reveals that the onset of the first instability in this open cavity is around Recr 1080. The three-dimensional shear layer mode with a complex structure is shown to be the most unstable mode. I t is noteworthy that the flow pattern of this high-frequency shear layer mode is similar to the observed unstable oscillations in supercritical unstable case. DNS of the cavity flow carried out at different Reynolds number from steady state until a nonlinear saturated state is obtained. The comparison of time histories of kinetic energy presents a clearly dominant energetic mode which shifts between low-frequency and highfrequency oscillation. A complete flow patterns from subcritical cases to supercritical case has been put in evidence. The flow structure at the supercritical case Re=1100 resembles typical wake-shedding instability oscillations with a lateral motion existed in the subcritical cases. Also, This flow pattern is similar to the observations in experiments. In order to validate the linear instability analysis results, the topology of the composite flow fields reconstructed by linear superposition of a three-dimensional base flow and its leading three-dimensional global eigenmodes has been studied. The instantaneous wall streamlines of those composited flows display distinguish influence region of each eigenmode. Attention has been focused on the leading high-frequency shear layer mode; the composite flow fields have been fully recognized with respect to the downstream wave shedding. The three-dimensional shear layer mode is shown to give rise to a typical wake-shedding instability with a lateral motions occurring downstream which is in good agreement with the experiment results. Moreover, the spanwise-periodic, open cavity with the same length to depth ratio has been also studied. The most unstable linear mode is different from the real three-dimensional cavity flow, because of the existence of the side walls. Structure sensitivity of the unstable global mode is analyzed in the flow control context. The adjoint-based sensitivity analysis has been employed to localized the receptivity region, where the flow is more sensible to momentum forcing and mass injection. Because of the non-normality of the linearized Navier-Stokes equations, the direct and adjoint field has a large spatial separation. The strongest sensitivity region is locate in the upstream lip of the three-dimensional cavity. This numerical finding is in agreement with experimental observations. Finally, a prototype of passive flow control strategy is applied.

Al Este del Retiro

La zona de Madrid al Este del Retiro ha estado indefectiblemente condicionada en su tardío desarrollo urbano por su posición a espaldas del Real Sitio. La construcción hacia 1640 de las tapias que rodeaban los reales jardines transformó la red de caminos que partían hacia oriente, aisló los terrenos ubicados más al Este de la ciudad, con la que ya sólo se podrían comunicar por las carreteras de Aragón y Valencia, y condenó las expectativas de desarrollo urbano reduciendo los precios de las propiedades, lo cual determinó durante décadas los usos y la arquitectura de la zona. El Anteproyecto de Ensanche de Carlos María de Castro constituye el germen a partir del cual, durante un lento proceso de casi cien años, fue configurándose la ciudad que hoy conocemos. La identificación en el Archivo de Villa del primer plano general del Ensanche trazado por Castro, del cual anteriores trabajos advirtieron de su existencia aunque se desconocía su localización, es la principal aportación de esta investigación. Por un lado, este primer plano general del Ensanche manuscrito es, por sí mismo, un documento de indudable importancia en la historia del urbanismo madrileño. En segundo lugar, el análisis de su contenido arroja nueva luz sobre la propuesta original de Castro, parcialmente censurada por la Dirección General de Obras Públicas antes de la aprobación del plan en 1860. Especialmente en lo referente a la zona de Madrid al Este del Retiro, proyectada como barrio obrero del Ensanche, este documento ha aportado un enfoque desconocido hasta ahora sobre el paisaje urbano concebido por Castro para la más ambiciosa propuesta planteada en mucho tiempo al problema de la vivienda obrera. Finalmente, el análisis de la factura del plano revela la superposición de varias capas de dibujo, evidenciando que durante un tiempo fue un documento vivo, utilizado como plano de trabajo por el equipo de Castro durante aproximadamente diez años, hasta la destitución del ingeniero en 1868. Posteriores análisis del plano sobre otros ámbitos de la ciudad arrojarán sin duda nuevos datos sobre el proceso proyectual del conjunto del Ensanche. Pero la dinámica de lo real, sintetizable en múltiples factores de índole social, económica y legislativa, transformó durante las primeras décadas de andadura del Ensanche la ciudad proyectada por Castro al Este del Retiro. El dibujo de la ciudad, entendido como herramienta de análisis y empleado con éxito en trabajos de investigación realizados por otros autores en la misma línea, ha permitido deducir la reconstitución gráfica del estado de la ciudad en diferentes momentos singulares del desarrollo urbanístico de la zona, así como de la propuesta original de barrio obrero de Castro. No hay que olvidar que, a pesar del escaso interés que suscitaba entre los inversores inmobiliarios el ámbito geográfico de estudio de esta tesis, fue objeto, durante casi un siglo, de numerosas propuestas de ordenación y urbanización que, aunque no llegaron a materializarse, fueron configurando una suerte de desarrollo virtual de la ciudad paralelo al devenir de la realidad. De esta forma, el dibujo se constituye en esta tesis como fuente de información, herramienta de pensamiento y resultado de la investigación en sí mismo, ilustrando y contribuyendo al mejor conocimiento de la forma urbana. ABSTRACT The area of Madrid to the East of the Retiro has been inevitably conditioned in its late urban development by its position behind the Royal Site. The construction of the walls surrounding the royal gardens around 1640 transformed the network of roads departing eastward, isolated land located to the East of the city, with which already only could communicate by roads of Aragon and Valencia, condemned the expectations of urban development by reducing the prices of the properties, and determined for decades uses and architecture of the area. The Carlos María de Castro preliminary design of City Expansion is the germ from which, during a slow process of almost one hundred years, the city which we know today was setting up. The discovery in the City Archive of the City Expansion first drawing traced by Castro, which previous investigations warned of its existence although its location was unknown, is the main contribution of this research. Firstly, this hand drawn general plan of the city expansion is by itself a document of undoubted importance in the history of Madrid urbanism. Secondly, the analysis of its content sheds new light on Castro´s original proposal, partially censored by the Dirección General de Obras Públicas before the approval of the plan in 1860. Especially concerning the area of Madrid to the East of the Retiro, projected as a workingclass district of the City Expansion, this document has provided an unknown up to now approach on the urban landscape designed by Castro for the more ambitious proposal put forward in a long time to the problem of worker housing. Finally, analysis of hand drawn plan reveals the superposition of several layers of drawing, demonstrating that for a time it was a living document, used as a work plan by the Castro team for approximately ten years, until the dismissal of the engineer in 1868. Subsequent analysis of the drawing on other areas of the city will have no doubt new data on the design process of the whole City Expansion. But the dynamics of reality, synthesizable on multiple factors in social, economic and legislative, transformed during the first decades of existence of the City Expansion designed by Castro to the East of the Retiro. Drawing of the city, understood as a tool of analysis and used successfully in research works done by other authors on the same line, has allowed to deduct graphic reconstitution of the city status in different and singular moments in the urban development of the area, as well as the original Castro´s proposal of working-class district. It should not be forgotten that, despite the lack of interest which raised among investors the geographic scope of this thesis study, it was the object, for nearly a century, of numerous proposals for urbanization which, although they didn´t materialize, were setting up a sort of virtual development of the city parallel to the becoming of the reality. In this way, drawing is used in the thesis as a source of information, tool of thought and outcome of the research itself, illustrating and contributing to a better understanding of urban form.

Prototipo experimental para implementar las solicitaciones del viento en los buques amarrados. Aplicación a un crucero

Habitualmente en los ensayos de barcos amarrados se reproduce la acción del oleaje. Se ha diseñado un sistema para la reproducción del efecto del viento en estos ensayos, utilizando motores, poleas, hilos de conexión, muelles, galgas y controladoras, de forma que la fuerza ejercida por el viento, previamente calculada considerando las características del barco y del viento, se transmite al barco mediante los elementos que componen el sistema. Este sistema consiste en un circuito cerrado de transmisión de fuerza con un motor que simultáneamente actúa sobre dos muelles deformándolos en sentidos opuestos, los cuales transmiten las fuerzas en los costados del buque, siendo la diferencia del alargamiento de los muelles la fuerza resultante sobre el barco. El sistema se aplicó a un buque crucero, obteniendo unos resultados que muestran la importancia de tener en cuenta el viento racheado como un agente adicional al oleaje que provoca movimientos y esfuerzos en las amarras y defensas elevados, dependiendo de su intensidad y dirección. Se ensayaron tres condiciones: modelo alimentado únicamente con olas, solo con viento y con ambos. En cada ensayo realizado se registraron los movimientos del buque, las fuerzas en las amarras y las reacciones en las defensas. La aportación de la Tesis es un sistema mecánico para excitar el modelo del buque amarrado con viento racheado superpuesto a la acción del oleaje. Evidentemente los resultados que se obtengan se ajustarán más a la situación real que reproduciendo sólo el oleaje. ABSTRACT Traditionally, moored ship tests with small-scale models only take into account the disturbance effect of waves. In this thesis, the design and testing of a system also implementing the effect of wind in moored ships is analyzed. The system is based on rotatory actuators acting on linear springs. This solution has a swift enough response to reproduce the fluctuating component of the wind. Three scenarios have been tested: waves, wind and combination of both. In order to assess the results, different sensors are connected to a computer for data acquisition, allowing the recording and subsequent analysis of the measured variables (forces in ropes, reactions in fenders and ship motions). The results obtained from the experiments show a great impact when wind effect is considered. A superposition effect is observed when waves and wind act together on the ship, emphasizing therefore the importance of taking the wind into account in berthed vessel tests, achieving safer and more realistic results.

Estratos arquitectónicos : conceptos, lógicas, sinopsis

La presente tesis doctoral se centra en la investigación del "estrato arquitectónico", manejando conceptos, lógicas y sinopsis como puntos organizativos, enlazados y superpuestos, que den paso a un marco propositivo que pueda ser simultáneamente articulado e independiente. Una situación que, ante nuevos desafíos, pretende ir más allá de una estricta definición de estrato o de su noción preconcebida descrita desde la superposición de diversos materiales. Todo ello a fin de revelar los diferentes perfiles del estrato y de la estratificación. Para ello, se abre y amplía el campo de estudio proyectual/procesual desdibujando los límites entre disciplinas –geología, filosofía, tecnología, arquitectura–. Y al mismo tiempo, se construye una cartografía del estrato arquitectónico asociada: a una taxonomía descriptora, a nuevas formulaciones, a pensamientos de personajes reconocibles y/o rescatados –como Rowe/Slutzky, Smithson, Parent/Virilio, Koolhaas, MVRDV, etc.–, y, por último, a nuevas lógicas proyectuales y operativas referidas al estrato, que fusionan conocimientos complejos. Unos contenidos que habitualmente no se presentan en investigaciones doctorales tradicionales –lo que permite afrontar nuevos cambios metodológicos, e imprimir un punto de partida para el desarrollo de futuras investigaciones o de otros posibles caminos emergentes–. Así, el discurso se impregna de nuevos referentes teóricos dentro de una misma mitología común (la del estrato). Un tema abordado con claves híbridas, es decir, con estudios selectivos y escritos coleccionados –analizados a partir de antecedentes encontrados y consolidados–, combinados con interpretaciones subyacentes en la arquitectura contemporánea –que pueden todavía encontrarse en fase experimental–. Una investigación que muestra la adaptación, la evolución y el cambio de la definición de "estrato arquitectónico", así como de su apariencia, utilización y aplicación a lo largo del tiempo, consecuencia de las nuevas necesidades y/o de las nuevas bases ideológicas ocasionadas por nuevos descubrimientos. Estratos arquitectónicos que dotan al espacio de profundidad –desde la bidimensionalidad– mediante la superposición de planos paralelos hacia la construcción de una nueva experiencia de estratificación fenomenológica. Estratos que generan estímulos y cambian su materialidad –de opacos a (en)tramados– creando apariencias y produciendo diversos efectos, para posteriormente exfoliarse y convertirse en estratos habitables. Estratos capturadores del espacio-tiempo, o de las dinámicas internas. Llegando incluso, con un último giro, a la era digital, donde el estrato informacional –que continua siendo independiente, autónomo y diverso, y que puede ser modificado, manipulado, suprimido o activable sin alterar el conjunto–, propicia obtener sistemas flexibles, relacionales, capaces de mutar o adaptarse, asociados a distintos niveles de organización dispositiva, que impulsan acciones y hacen emerger lógicas proyectuales. Estratos que surgen de forma elaborada o espontánea en el territorio urbano o natural (ciudad sobre ciudad, suelo sobre suelo), que se aplican extendiendo e hibridando el territorio (paisajes operativos), que son replanteados artificialmente como mecanismos edificatorios según las exigencias existentes (estratos programáticos, capas especializadas), y que se implantan como capas/layers en los programas informáticos utilizados como herramientas de diseño (multicapas, sistemas de intercambio informacional). Un trabajo que se estructura de manera multicapa lo que permite recorrer la tesis como un mapa de secuencias, saltar entre estratos de información, o seleccionar lecturas según intereses de pensamiento o acción arquitectónica. En consecuencia, una investigación sobre el "estrato arquitectónico" que conecta diversas disciplinas, que recopila distintos posicionamientos teórico/prácticos –lo que implica la introducción de parámetros y datos vivos–, y afronta un posicionamiento estratégico que vuelve a poner en valor el estrato arquitectónico –partiendo de estrategias formales que se han transformado en estrategias experimentales/operativas (a medida que el entorno se ha ido complejizando), siguiendo una estrategia conceptual e intelectual contemporánea, propia y específica–. ABSTRACT This PhD thesis is based on the research of "architectural stratum" using concepts, logical and synopsis as organizational, linked and overlapping points, which give way to a proactive framework that can be articulated and independent simultaneously. A situation that, faced with new challenges, aims to go beyond a strict definition of stratum or their preconceived notion described from the superposition of different materials. All this in order to reveal the different profiles of stratum and stratification. To do this, it opens and widens the field of project/process study, blurring the boundaries between disciplines –geology, philosophy, technology, architecture–. And, at the same time, a cartography of the architectural stratum is constructed, that associates with: descriptor taxonomy, new formulations, thoughts of recognizable and/or rescued characters, –as Rowe/Slutzky, Smithson, Parent/Virilio, Koolhaas, MVRDV, etc.–, and finally, a new project and operational logics referred to stratum, which merge complex knowledge. A content not usually presented in traditional doctoral research –which can face new methodological changes, and creates a starting point for future research or other possible emerging paths–. Thus, the work is imbued with new theoretical framework within a common mythology (stratum’s myth). An issue addressed with hybrid keys, that is, with selective studies and collected writings –analyzed starting from found and consolidated backgrounds–, combined with underlying performances on contemporary architecture –which can still be in experimental phase–. A research that shows adaptation, evolution and change of the definition of "architectural stratum", as well as their appearance, use and application throughout time, result of the new requirements and/or the new ideological foundations caused by new discoveries. Architectural strata that give depth to space –from two-dimensionality– by overlapping parallel planes towards the construction of a new experience of phenomenological stratification. Strata that generate stimuli and change their materiality –from opaque to lattice– creating appearances and producing various effects, for later exfoliating and becoming habitable strata. Strata that capture space-time or internal dynamics. Even reaching, with a final twist, the digital age, where the informational stratum –which remains independent, autonomous and diverse, and can be modified, manipulated, deleted or activated without altering the whole–, contribute to obtaining flexible, relational systems, able to mutate or adapt, associated with different levels of regulatory organization, that drive actions and make emerge project logics. Strata that arise elaborately or spontaneously in urban or natural territory (city upon city, floor upon floor), which apply expanding and hybridizing the territory (operational landscapes), which are artificially restated as building mechanisms according to existing requirements (strata program, specialized layers), which are implemented as layers in the software used as design tools (multilayer, systems of informational interchange). A work that is structured in a multi-layered way, which allows explore the thesis as a sequence map, jump between layers of information, or select readings according to an interest in thought or architectural action. Therefore, an investigation into the "architectural stratum" that connects different disciplines, which collects different theoretical/practical positions –which implies the introduction of live parameters and data– and faces a strategic positioning returning to value the architectural stratum –based on formal strategies that have become experimental/operational strategies (as the environment has become more complex), following a conceptual, intellectual, contemporary, own specific strategy–.

Crystal structure of the RNA-dependent RNA polymerase of hepatitis C virus

We report the crystal structure of the RNA-dependent RNA polymerase of hepatitis C virus, a major human pathogen, to 2.8-Å resolution. This enzyme is a key target for developing specific antiviral therapy. The structure of the catalytic domain contains 531 residues folded in the characteristic fingers, palm, and thumb subdomains. The fingers subdomain contains a region, the “fingertips,” that shares the same fold with reverse transcriptases. Superposition to the available structures of the latter shows that residues from the palm and fingertips are structurally equivalent. In addition, it shows that the hepatitis C virus polymerase was crystallized in a closed fingers conformation, similar to HIV-1 reverse transcriptase in ternary complex with DNA and dTTP [Huang H., Chopra, R., Verdine, G. L. & Harrison, S. C. (1998) Science 282, 1669–1675]. This superposition reveals the majority of the amino acid residues of the hepatitis C virus enzyme that are likely to be implicated in binding to the replicating RNA molecule and to the incoming NTP. It also suggests a rearrangement of the thumb domain as well as a possible concerted movement of thumb and fingertips during translocation of the RNA template-primer in successive polymerization rounds.

Estimating the probability for a protein to have a new fold: A statistical computational model

Structural genomics aims to solve a large number of protein structures that represent the protein space. Currently an exhaustive solution for all structures seems prohibitively expensive, so the challenge is to define a relatively small set of proteins with new, currently unknown folds. This paper presents a method that assigns each protein with a probability of having an unsolved fold. The method makes extensive use of protomap, a sequence-based classification, and scop, a structure-based classification. According to protomap, the protein space encodes the relationship among proteins as a graph whose vertices correspond to 13,354 clusters of proteins. A representative fold for a cluster with at least one solved protein is determined after superposition of all scop (release 1.37) folds onto protomap clusters. Distances within the protomap graph are computed from each representative fold to the neighboring folds. The distribution of these distances is used to create a statistical model for distances among those folds that are already known and those that have yet to be discovered. The distribution of distances for solved/unsolved proteins is significantly different. This difference makes it possible to use Bayes' rule to derive a statistical estimate that any protein has a yet undetermined fold. Proteins that score the highest probability to represent a new fold constitute the target list for structural determination. Our predicted probabilities for unsolved proteins correlate very well with the proportion of new folds among recently solved structures (new scop 1.39 records) that are disjoint from our original training set.