Strong decline in the consumption of invertebrates by barn owls from 1860 to 2012 in Europe

Capsule The analysis of 616 papers about the diet of the European Barn Owl Tyto alba showed that 9678 invertebrates were captured out of 3.13 million prey items (0.31%). The consumption of invertebrates strongly decreased between 1860 and 2012. This further demonstrates that the Barn Owl diet changed to a large extent during the last 150 years.

Simulating fuel consumption and vehicle emissions in an Australian context

Road transport is a major source of air pollution and greenhouse gas emissions around the world. There is an increasing interest in accurate information on local vehicle emission levels for policy development and sustainable traffic management. Previous studies have shown that emission predictions for the Australian situation need to reflect both the Australian fleet and driving behaviour to avoid unreliable outcomes. This paper discusses a new Australian vehicle emission software (PΔP) and a case-study where traffic simulation software (Aimsun) is combined with PΔP to demonstrate how consistent results can be achieved for the Australian situation. The case-study is an Australian city modelled using the microscopic simulator to generate the required trajectory data of each individual vehicle for the emission model. The simulation results are used in a number of ways: to assess the impacts of urban driving behaviour on fuel consumption, to create maps showing where and when elevated emission levels occur and to compare results with another program (COPERT Australia). The paper will also discuss where further research is required.

Power Consumption in Carbon Capture and Storage Systems (CCS) and Possibilities to Reduce Power Consumption with Variable Speed Drives

The aim of this master´s thesis is to study which processes increase the auxiliary power consumption in carbon capture and storage processes and if it is possible to reduce the auxiliary power consumption with variable speed drives. Also the cost of carbon capture and storage is studied. Data about auxiliary power consumption in carbon capture is gathered from various studies and estimates made by various research centres. Based on these studies a view is presented how the power auxiliary power consumption is divided between different processes in carbon capture processes. In a literary study, the operation of three basic carbon capture systems is described. Also different methods to transport carbon dioxide and carbon dioxide storage options are described in this section. At the end of the thesis processes that consume most of the auxiliary power are defined and possibilities to reduce the auxiliary power consumption are evaluated. Cost of carbon capture, transport and storage are also evaluated at this point and in the case that the carbon capture and storage systems are fully deployed. According to the results, it can be estimated what are the processes are where variable speed drives can be used and what kind of cost and power consumption reduction could be achieved. Results also show how large a project carbon capture and storage is if it is fully deployed.

The chemistry involved in the steam treatment of lignocellulosic materials

Pretreatment of lignocellulosic materials is essential for bioconversion because of the various physical and chemical barriers that greatly inhibit their susceptibility to bioprocesses such as hydrolysis and fermentation. The aim of this article is to review some of the most important pretreatment methods developed to date to enhance the conversion of lignocellulosics. Steam explosion, which precludes the treatment of biomass with high-pressure steam under optimal conditions, is presented as the pretreatment method of choice and its mode of action on lignocellulosics is discussed. The optimal pretreatment conditions for a given plant biomass are defined as those in which the best substrate for hydrolysis is obtained with the least amount of soluble sugars lost to side reactions such as dehydration. Therefore, pretreatment optimization results from a compromise between two opposite trends because hemicellulose recovery in acid hydrolysates can only be maximized at lower pretreatment severities, whereas the development of substrate accessibility requires more drastic pretreatment conditions in which sugar losses are inevitable. To account for this heterogeneity, the importance of several process-oriented parameters is discussed in detail, such as the pretreatment temperature, residence time into the steam reactor, use of an acid catalyst, susceptibility of the pretreated biomass to bioconversion, and process design.

The relevance of theobromine for the beneficial effects of cocoa consumption.

Cocoa consumption began in America and in the mid sixteenth Century it quickly spread to Europe. Beyond being considered a pleasant habit due to its rich sweet lingering taste, chocolate was considered a good nutrient and even a medicine. Traditionally, health benefits of cocoa have been related with the high content of antioxidants of Theobroma cocoa beans. However, the direct psychoactive effect due to methylxanthines in cocoa is notable. Theobromine and caffeine, in the proportions found in cocoa, are responsible for the liking of the food/beverage. These compounds influence in a positive way our moods and our state of alertness. Theobromine, which is found in higher amounts than caffeine, seems to be behind several effects attributed to cocoa intake. The main mechanisms of action are inhibition of phosphodiesterases and blockade of adenosine receptors. Further mechanisms are being explored to better understand the health benefits associated to theobromine consumption. Unlike what happens in other mammals -pets- included, theobromine is safe for humans and has fewer unwanted effects than caffeine. Therefore, theobromine deserves attention as one of the most attractive molecules in cocoa.

Taxation of unhealthy consumption of food and drinks: An updated literature review

By means of a literature review this paper aims at shedding more light on the potentialities of unhealthy food/drink taxation in changing eating patterns and life styles and hence combating the obesity epidemic. One remarkable point that emerges when assessing the set of selected papers is the existence of a wide diversity of objectives, methodologies, settings and datasets, policies implemented and results achieved by all these studies, which undoubtedly adds complexity to any attempt to draw a general conclusion on fast food taxation. Most of the examined studies predict a rather modest fiscal impact on unhealthy food and drinks consumption and/or nutrition intake and consequently a poor result on weight loss and obesity, by the interplay of several factors among them the effects of cross-price elasticities.

Taxation of unhealthy consumption of food and drinks: An updated literature review

By means of a literature review this paper aims at shedding more light on the potentialities of unhealthy food/drink taxation in changing eating patterns and life styles and hence combating the obesity epidemic. One remarkable point that emerges when assessing the set of selected papers is the existence of a wide diversity of objectives, methodologies, settings and datasets, policies implemented and results achieved by all these studies, which undoubtedly adds complexity to any attempt to draw a general conclusion on fast food taxation. Most of the examined studies predict a rather modest fiscal impact on unhealthy food and drinks consumption and/or nutrition intake and consequently a poor result on weight loss and obesity, by the interplay of several factors among them the effects of cross-price elasticities.

Determinação das formas de nitrogênio e nitrogênio total em rochas-reservatório de petróleo por destilação com arraste de vapor e método do indofenol

Several extraction procedures are described for the determination of exchangeable and fixed ammonium, nitrate + nitrite, total exchangeable nitrogen and total nitrogen in certified reference soils and petroleum reservoir rock samples by steam distillation and indophenol method. After improvement of the original distillation system, an increase in worker safety, a reduction in time consumption, a decrease of 73% in blank value and an analysis without ammonia loss, which could possibly occur, were achieved. The precision (RSD < 8%, n = 3) and the detection limit (9 mg kg-1 NH4+-N) are better than those of published procedures.

Optimization of energy in a pulp mill

This study presents examination of ways to increase power generation in pulp mills. The main purpose was to identify and verify the best ways of power generation growth. The literature part of this study presented operation of energy pulp mill departments, energy consumption and generation by the recovery and power boilers. The second chapter of this part described the main directions for increase of electricity generation rise of black liquor dry solid content, increase of main steam parameters, flue gas heat recovery technologies, feed water and combustion air preheating. The third chapter of the literature part presented possible technical, environment and corrosion risks appeared from described alternatives. In the experimental part of this study, calculations and results of possible models with alternatives was presented. The possible combinations of alternatives were generated in 44 `models of energy pulp mill. The target of this part was define extra electricity generation after alternatives using and estimate profitability of generated models. The calculations were made by computer programme PROSIM. In the conclusions, the results were estimated on the basis of extra electricity generation and equipment design data of models. The profitability of cases was verified by their payback periods and additional incomes.

Modelling of the PWR PACTEL vertical steam generator with the TRACE code

The behavior of the nuclear power plants must be known in all operational situations. Thermal hydraulics computer applications are used to simulate the behavior of the plants. The computer applications must be validated before they can be used reliably. The simulation results are compared against the experimental results. In this thesis a model of the PWR PACTEL steam generator was prepared with the TRAC/RELAP Advanced Computational Engine computer application. The simulation results can be compared against the results of the Advanced Process Simulator analysis software in future. Development of the model of the PWR PACTEL vertical steam generator is introduced in this thesis. Loss of feedwater transient simulation examples were carried out with the model.

Energian käyttö sahatavaran kuivauksessa

Sahatavaran tuotannossa käytetään runsaasti lämpöä ja sähköä. Sähköä käytetään pääasiassa sahausvaiheessa ja lämpöä kuivausvaiheessa. Sahatavarakuutiosta haihdutetaan vettä kuivaamoissa noin 230-600 kiloa. Sahatavara kuivataan, koska kuivattu sahatavara säilyy paremmin ja on lisäksi kevyempää, kestävämpää ja sen muodonmuutokset ovat pienempiä. Työssä käsiteltävällä sahalla on erääseen kanavakuivaamoon tehty koerakennelma, jonka avulla kuivaamosta poistettavan ilman sisältämää lämpöä hyödynnetään sahatavaran lämmittämisessä kuivauslämpötilaan kuormanvaihdon jälkeen. Energiansäästön lisäksi rakennelman toivotaan ehkäisevän kuormanvaihdosta aiheutuvia olosuhdemuutoksia kuivausprosessin muissa vaiheissa. Poistoilman sisältämä höyry lauhtuu lämmittäessään kylmää sahatavaraa. Lauhtumisen yhteydessä vapautuu runsaasti energiaa. Tehtyjen kokeiden perusteella koerakennelma vähensi lämmönkulutusta selvästi. Lämmönkulutuksen alenema oli jopa teorialaskelmaa suurempi, mistä syystä kokeellisessa osassa tehtyihin mittaustuloksiin on syytä suhtautua varauksella. Perinteisessä kuivaamossa kosteus poistuu pääasiassa vesihöyrynä, mutta koerakennelman avulla saadaan noin puolet puusta haihdutetusta vedestä lauhtumaan takaisin vedeksi.

Methanol steam reforming over Cu/CeO2 catalysts: influence of zinc addition

Methanol steam reforming reaction was studied over Cu(5 wt.%)/CeO2 with and without the presence of Zn. The Zn addition decreased the Cu+2 reducibility and increased the oxygen mobility of ceria. The main products were CO2 and H2 with small amount of CO. Selectivity to CO decreased with the Zn addition and it was lower at lower reaction temperatures and lower space velocities. At 230 ºC and W/F MeOH = 648 g min mol-1 selectivities to H2 and to CO2 were 100% on Zn/Cu/Ce. The catalytic results indicated that CO was mainly a secondary product formed from reverse water gas shift reaction.