Remoção de bezerros e/ou ECG na taxa de prenhez de vacas Nelore paridas submetidas à IATF e seus eleitos no desempenho das crias

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo in vitro do comportamento de facetas confeccionadas com artglass e targis quando submetidas à inserção e remoção de grampos circunferenciais em cromo-cobalto

Aiming to investigate in vitro the behavior of esthetic veneers placed in crows and made of the laboratory resins Artglass and Targis when submitted to insertion and removal of circunferential cobalt-chromium clasps, 24 veneer crowns were made (twelve with Artglass (Heraeus Kulzer) and twelve with Targis (Ivoclar Vivadent)), as well as the respective cobalt-chromium clasps. The crowns were then submitted to five thousand cycles of clasps insertion and removal, using a proper device. Using the verification of the force necessary to remove the clasps over the crowns during the experiment, the clasps and crowns mass variation, and the macroscopic inspection of the veneers, one may conclude that the veneers did not show a significant variation of the force required to remove the clasps over the crowns; they show a little amount of abrasion, possible to detect using a visual inspection and they show a little and variable amount of mass loss, less for that made with Artglass (average of 0,002g) and greater for that made with Targis (average of 0,006g)

Comparação da infiltração marginal de restaurações adesivas empregando instrumento rotativo ou um sistema químico-mecânico na remoção do tecido cariado

Pós-graduação em Odontologia Restauradora - ICT

Remoção do ácido mefenâmico em água utilizando carvão ativado em pó, lama vermelha e oxidação com cloro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Remoção da adesividade em ovos de Pseudoplatystoma fasciatum

Pós-graduação em Aquicultura - FCAV

Efeitos da exposição aos poluentes do ar com base nas internações por doenças cardiovasculares e respiratórias no município de Taubaté, SP

Pós-graduação em Engenharia Civil e Ambiental - FEB

Ocorrência de poluentes orgânicos persistentes em ovos de Caiman yacare (jacaré-do-Pantanal)

Pós-graduação em Química - IQ

Eficiência de detergentes e EDTA na remoção da smear layer de superfícies radiculares submetidas a raspagem e aplainamento: análise através da microscopia eletrônica de varredura

A remoção da smear layer é um procedimento importante para a regeneração periodontal e para o tratamento da sensibilidade dentinária. Diversos tratamentos tem sido realizados para sua remoção, porém, mostrando resultados conflitantes ou insatisfatórios. No presente estudo nos propomos a analisar através do microscópio eletrônico de varredura a eficiência dos detergentes: lauril sulfato de sódio, Plax e de mamona assim como o EDTA 24% na remoção da smear layer. Todos os produtos testados foram aplicados com bolinha de algodão, renovada a cada 30 segundos, a qual era esfregada na superfície radicular por diferentes períodos. As fotomicrografias foram analisadas através da aplicação de um índice de remoção da smear layer por três examinadores calibrados e os resultados analisados estatisticamente. De acordo com nossos resultados pudemos chegar as seguintes conclusões: 1- a instrumentação com curetas de Gracey provocou a formação da smear layer; 2- o detergente lauril sulfato de sódio não removeu a smear layer, tendo sido o pior resultado entre os detergentes testados; 3- Os detergentes Plax e de mamona mostraram resultados semelhantes entre si e superiores ao controle negativo e ao lauril sulfato de sódio, porém, não removeram a smear layer satisfatoriamente; 4- O EDTA 24% neutro mostrou ser eficiente para a remoção da smear layer.

Avaliação da toxicidade de corantes azóicos por Allium cepa e estudo da capacidade de remoção destes compostos em solução por Saccharomyces cerevisiae

Não disponível

Remoção de cromo de resíduos de curtumes por argilitos da formação Corumbataí - SP

The tanning wastes are characterized to be significant sources of pollution in the hydrosphere when non adjusted or disposed adequated form. That happens because this industry type uses the chromium to tan hides, and this element is present in discharges concentrations in final wastes, characterizing this waste type as dangerous, according to the Associação Brasileira de Normas Técnicas, através da Norma Brasileira 10.004 de 2004. Due to this, the research proposes a form to reduction chromium of the tanning wastes through the process of adsorption. For that were used mining-wastes of Corumbataí Formation clays, material commonly used in the production of ceramic products in Rio Claro (SP). They were accomplished laboratory essays that involved the preparation of different clays pulps and subsequent mixture of these with the tanning wastes, maintaining them under different mixing times and adsorption contacts. After the separation of the mixtures, the leached were chemically analyzed and it was seen the efficiency of chromium reduction and your relationship with the variation of different times of contact clays/wastes and different grain sizes used in the pulps preparation.

Remoção de matéria orgânica e nitrogênio de efluentes provenientes de abatedouros de bovinos por meio de reator aeróbio operando em bateladas sequenciais com adição de coagulante químico

The volume of liquid effluent generated in cattle slaughterhouses is quite high and cannot be released untreated in water bodies due to its high pollution load of predominantly organic origin. To minimize the environmental impacts of its industrial wastewater and meet the local environmental legislation, abattoirs shall make the treatment of these effluents. The present work aims to develop the study of a reactor by sequential batch pilot scale, in order to optimize their performance in treating wastewater from a cattle slaughterhouse. The treatment system used was developed and installed in the Laboratory of Wastewater Treatment, in Faculty of Science and Technology UNESP, Presidente Prudente campus. The procedure used followed the operation of sequential batch reactors, in which all processes and treatment operations occurring sequentially in a single unit, by establishing specific operating cycles, which comprise the following separated phases: aerobic reaction, anoxic reaction, sedimentation and emptying. Aiming to improve the quality of treatment was planned the addition of coagulant Poly Aluminum Chloride (PAC) in the reactor, by determining their optimal dosage by Jar-test trials. Were prepared four steps with specific operating cycles: step one or acclimatization (10 hour of aeration, one hour and 30 minutes of sedimentation and 30 minutes for exchanging the effluent); step 2 (6 hours of aeration or aerobic phase, 4 hours and 45 minutes of stirring or anoxic phase and 1 hour and 15 minutes for sedimentation and exchange effluent); step 3 (2 hours and 30 minutes of aeration, 8 hours and 15 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange) and step 4 (2 hours of aeration, 8 hours and 45 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange)... (Complete abstract click electronic access below)

Amostragem de poluentes gasosos e particulados emitidos pela queima de biomassa vegetal

The use of biomass as an energy source has been increasing in Brazil, with emphasis on the use of wood biomass, such as bark, wood chips and sawdust, that after receiving the appropriate treatment can be used in burners for power generation. However, from this burning are emitted fine particles known as particulate matter and a wide range of toxic organic and inorganic components in the form of gases that contribute greatly to air pollution and global warming, affecting human health, the environment and climate. The objective of this project was the quantification of gaseous and particulate, using and evaluating the equipment DR4000 ( Dataram 4 ) sampling of particulates smaller than 2.5μm and EUROTRON ( Ecoline 4000 ) when sampling gaseous pollutants, emitted from the burning of biomass in real time in the firing burner to a chimney attached biomass . We note that there are no specific rules that establish emission limits for particulate matter with diameter less than 2.5μm that are most harmful to human health and the highest concentrations reached about 800000μg/m3, for smaller diameters. It is noticeable the need for sampling of pollutants especially in industries that use biomass to fuel that could be implanted emission control equipment

Amostragem de poluentes particulados emitidos pela queima de biomassa em correntes confinadas

It is clear today the ever-accelerating search for new fuels that will eventually replace those that will survive in our society, which are fossil fuels. For this reason, a fuel used since the dawn of humanity and much studied since then, considered the generator of clean, renewable energy, can earn more and more space in the power generation sector, which is biomass. We performed two experiments with two different types of biomass, one from the Amazon rainforest and other pine and eucalyptus as waste from the sawmill UNESP Itapeva. In the first experiment, conducted at the Laboratory of Combustion and Propulsion INPE Cachoeira Paulista were conducted three tests in a chimney with a fan creating forced ventilation, where the biomass was burned and deposited on a support beneath the hood. In the second experiment was conducted to analyze the emission of particulate matter using biomass (waste) from the sawmill on the campus of UNESP experimental Itapeva the burning of it in a burner for heating water for a wood oven. In these experiments we used a particle called DATARAM4 sampler that is capable of sampling both outdoors and inside of pipelines, which is the focus of this work. With this equipment it was possible to measure the concentration of particulate matter in all the firings as above, and compare them to levels acceptable in the current law, always trying to analyze the so-called fine particles, which are those with diameters less than 2.5 μm. Using data obtained from the equipment was also possible to evaluate the diametral distribution of particulate matter in question, and verify which phases of the flares in the concentration and the diameters of the particles are the most critical. In this work we concluded that in all firings conducted concentrations of particulate matter were higher than that allowed by the law, and the diameters were found that are more harmful to human health

Estudo de biossorção e testes de imobilização usando Luffa cylindrica como adsorvente e Saccharomyces cerevisiae como agente imobilizado visando analisar a capacidade de remoção de corantes azóicos em solução

Não disponível

Efeito da adição de inulina no crescimento, resistência gastrintestinal e capacidade de remoção de colesterol de Lactobacillus helveticus 416 e Enterococcus faecium CRL 183

O objetivo do presente estudo foi verificar o efeito da adição de um prebiótico nas características de crescimento, resistência às condições do trato gastrintestinal e remoção de colesterol in vitro, das cepas de Enterococcus faecium CRL183 e Lactobacillus helveticus 416. A fonte de prebiótico foi composta por Inulina GR – Orafti, sendo testadas as seguintes concentrações: 1,0%, 2,0%, 3,0%; 4,0%; 5,0% e 6,0% p/v). Para a avaliação da resistência às condições do trato gastrintestinal, os microrganismos foram colocados em contato com um fluido gástrico simulado por 2 horas (9g/L de NaCl, 3g/L de pepsina, pH 1,8) e com um fluido intestinal simulado por 3 horas (0,9g/L de pancreatina, 12,5g/L de bicarbonato de sódio e 6,0 g/L de Oxgall). Após o período de contato com os fluidos, foram realizadas diluições seriais e plaqueamento em meios específicos. No estudo de redução de colesterol, meios de cultura contendo inulina e colesterol (1%) foram inoculados com as cepas probióticas e incubados em anaerobiose a 37°C/24h. A capacidade de redução do colesterol foi determinada pela diferença entre a concentração de colesterol adicionada ao meio de cultura e a de colesterol residual. Os resultados foram submetidos à análise de variância e teste de médias de Tukey (p≤0,05). A adição de inulina não resultou em alteração no ciclo logarítmico de crescimento dos microrganismos. Porém, quando os dados foram submetidos à análise estatística, constatou-se que a adição de 1% a 4% de inulina inibiu o crescimento de Lactobacillus helveticus 416, sendo que para as concentrações de 5% a 6% estas alterações não foram perceptíveis. A cepa de Enterococcus faecium CRL 183 apresentou crescimento superior na presença de 2% e 4% de inulina. Após o contato com o fluido gástrico simulado, observou-se redução de 1 ciclo logarítmico no crescimento da cepa... (Resumo completo, clicar acesso eletrônico abaixo)