Strategy for Reducing Alcohol Related Harm (PDF 1044KB)

Alcohol, used responsibly and in moderation, is a normal and enjoyable aspect of everyday life for most people. Everyone is familiar with the wide variety of social settings in which it is consumed, ranging from casual enjoyment or relaxation to celebratory and ceremonial occasions. This widespread use of alcohol means that the manufacture and retailing of alcohol products, and its distribution through bars, clubs, restaurants and off-licences involves an estimated 32,000 jobs, both full and part time. The economic significance of this to society here is obvious. åÊ

Are vectors able to learn about their hosts? A case study with Aedes aegypti mosquitoes

The way in which vectors distribute themselves amongst their hosts has important epidemiological consequences. While the role played by active host choice is largely unquestioned, current knowledge relates mostly to the innate response of vectors towards stimuli signalling the presence or quality of their hosts. Many of those cues, however, can be unpredictable, and therefore prevent the incorporation of the appropriate response into the vector's behavioural repertoire unless some sort of associative learning is possible. We performed a wide range of laboratory experiments to test the learning abilities of the mosquito, Aedes aegypti. Mosquitoes were exposed to choice procedures in (1) an olfactomenter and (2) a 'visual arena'. Our goal was to determine whether the mosquitoes were able to associate unconditional stimuli (blood feeding, human breath, vibration and electrical shock) with particular odours (citral, carvone, citronella oil and eugenol) and visual patterns (horizontal or vertical black bars) to which they had been previously observed to be responsive. We found no evidence supporting the hypothesis that associative learning abilities are present in adult Ae. aegypti. We discuss the possibilities that the assays employed were either inappropriate or insufficient to detect associative learning, or that associative learning is not possible in this species.

A study of the cambial zone and conductive phloem of common beech (Fagus sylvatica L.) using an image analysis method. I. Influence of tree age on the structure

Quantification is a major problem when using histology to study the influence of ecological factors on tree structure. This paper presents a method to prepare and to analyse transverse sections of cambial zone and of conductive phloem in bark samples. The following paper (II) presents the automated measurement procedure. Part I here describes and discusses the preparation method, and the influence of tree age on the observed structure. Highly contrasted images of samples extracted at breast height during dormancy were analysed with an automatic image analyser. Between three young (38 years) and three old (147 years) trees, age-related differences were identified by size and shape parameters, at both cell and tissue levels. In the cambial zone, older trees had larger and more rectangular fusiform initials. In the phloem, sieve tubes were also larger, but their shape did not change and the area for sap conduction was similar in both categories. Nevertheless, alterations were limited, and demanded statistical analysis to be identified and ascertained. The physiological implications of the structural changes are discussed.

Evaluation of organ-specific peripheral doses after 2-dimensional, 3-dimensional and hybrid intensity modulated radiation therapy for breast cancer based on Monte Carlo and convolution/superposition algorithms: implications for secondary cancer risk assessment.

To make a comprehensive evaluation of organ-specific out-of-field doses using Monte Carlo (MC) simulations for different breast cancer irradiation techniques and to compare results with a commercial treatment planning system (TPS). Three breast radiotherapy techniques using 6MV tangential photon beams were compared: (a) 2DRT (open rectangular fields), (b) 3DCRT (conformal wedged fields), and (c) hybrid IMRT (open conformal+modulated fields). Over 35 organs were contoured in a whole-body CT scan and organ-specific dose distributions were determined with MC and the TPS. Large differences in out-of-field doses were observed between MC and TPS calculations, even for organs close to the target volume such as the heart, the lungs and the contralateral breast (up to 70% difference). MC simulations showed that a large fraction of the out-of-field dose comes from the out-of-field head scatter fluence (>40%) which is not adequately modeled by the TPS. Based on MC simulations, the 3DCRT technique using external wedges yielded significantly higher doses (up to a factor 4-5 in the pelvis) than the 2DRT and the hybrid IMRT techniques which yielded similar out-of-field doses. In sharp contrast to popular belief, the IMRT technique investigated here does not increase the out-of-field dose compared to conventional techniques and may offer the most optimal plan. The 3DCRT technique with external wedges yields the largest out-of-field doses. For accurate out-of-field dose assessment, a commercial TPS should not be used, even for organs near the target volume (contralateral breast, lungs, heart).

Cardiac rotation and relaxation after anterolateral myocardial infarction.

BACKGROUND: Both systolic and diastolic dysfunction have been observed in patients with anterolateral myocardial infarction. Diastolic dysfunction is related to disturbances in relaxation and diastolic filling. OBJECTIVE: To analyse cardiac rotation, regional shortening and diastolic relaxation in patients with anterolateral infarction. METHODS: Cardiac rotation and relaxation in controls and patients with chronic anterolateral infarction were assessed by myocardial tagging. Myocardial tagging is based on magnetic resonance imaging and allows us to label specific myocardial regions for imaging cardiac motion (rotation, translation and radial displacement). A rectangular grid was placed on the myocardium (basal, equatorial and apical short-axis plane) of each of 18 patients with chronic anterolateral infarction and 13 controls. Cardiac rotation, change in area and shortening of circumference were determined in each case. RESULTS: The left ventricle in controls performs a systolic wringing motion with a clockwise rotation at the base and a counterclockwise rotation at the apex when viewed from the apex. During relaxation a rotational motion in the opposite direction (namely untwisting) can be observed. In patients with anterolateral infarction, there is less systolic rotation at the apex and diastolic untwisting is delayed and prolonged in comparison with controls. In the presence of a left ventricular aneurysm (n = 4) apical rotation is completely lost. There is less shortening of circumference in infarcted and remote regions. CONCLUSIONS: The wringing motion of the myocardium might be an important mechanism involved in maintaining normal cardiac function with minimal expenditure of energy. This mechanism no longer operates in patients with left ventricular aneurysms and operates significantly less than normal in those with anterolateral hypokinaesia. Diastolic untwisting is significantly delayed and prolonged in patients with anterolateral infarction, which could explain the occurrence of diastolic dysfunction in these patients.

Morphological study of the eggs and nymphs of Triatoma dimidiata (Latreille, 1811) observed by light and scanning electron microscopy (Hemiptera: Reduviidae: Triatominae)

Eggs and nymphs of Triatoma dimidiata were described using both light and scanning electron microscopy. The egg body and operculum have an exochorion formed by irregular juxtaposed polygonal cells; these cells are without sculpture and the majority of them are hexagonal in shape. The five instars of T. dimidiatacan be distinguished from each other by characteristics of the pre, meso and metanotum. The number of setiferous tubercles increases progressively among instars. The sulcus stridulatorium of 1st instar nymphs is amorphous, showing median parallel grooves; from the 2nd instar on the sulcus is, progressively, elongate, deep and posteriorly pointed with stretched parallel grooves. All instars have a trichobothrium on the apical 1/3 of segment II of the antenna. The opening of the Brindley's gland is on the mesopleura. Fifth instar nymphs have an apical ctenidium on the ventral surface of the fore tibia. Dorsal glabrous patches are found on the lateral 1/3 of abdomen. Bright oval patches are found on the ventral median line of the abdomen, from segment IV-VI; 1st instar nymphs lack these patches. Abdominal dorsal plates are present from the 1st-5th instars; the 1st instar also contains a rectangular plate in segment IX. From the 2nd instar on, variably-shaped plates are present on segments VII to IX. Morphometric data were also obtained and proved to be useful for distinguishing T. dimidiata instars.

Sexually dimorphic melanin-based colour polymorphism, feather melanin content, and wing feather structure in the barn owl (Tyto alba)

Feathers confer protection against biophysical agents and determine flying ability. The geometry and arrangement of the barbs, together with the keratin and pigments deposited in the feathers, determine the mechanical stability of the vane, and its stiffness and resistance to abrasive agents. In colour-polymorphic species, individuals display alternative colour morphs, which can be associated with different foraging strategies. Each morph may therefore require specific flying abilities, and their feathers may be exposed to different abrasive agents. Feathers of differently coloured individuals may thus have a specific structure, and colour pigments may help resist abrasive agents and improve stiffness. We examined these predictions in the barn owl (Tyto alba), a species for which the ventral body side varies from white to dark reddish pheomelanic, and in the number and size of black spots located at the tip of the feathers. White and reddish birds show different foraging strategies, and the size of black feather spots is associated with several phenotypic attributes. We found that birds displaying a darker reddish coloration on the ventral body side deposit more melanin pigments in their remiges, which also have fewer barbs. This suggests that wear resistance increases with darkness, whereas feathers of lighter coloured birds may bend less easily. Accordingly, individuals displaying a lighter reddish coloration on the ventral body side, and those displaying larger black spots, displayed more black transverse bars on their remiges: as larger-spotted individuals are heavier and longer-winged birds also have more transverse bars, these bars may reduce feather bending when flying. We conclude that differently coloured individuals produce wing feathers of different strengths to adopt alternative behavioural and life history strategies

Eimeria pavoaegyptica sp. nov. (Apicomplexa: Eimeriidae) in faeces of Indian peacocks, Pavo cristatus Linnaeus, 1758 (Galliformes: Phasianidae) from Egypt

Coprological examination of 15 Indian peacocks, Pavo cristatus, revealed the presence of a coccidium species of the genus Eimeria, which apparently represents a previously undescribed species. Sporulation is exogenous and fully developed oocysts of Eimeria pavoaegyptica sp. nov. are ellipsoidal, with a dimension of 15 (13-16) × 12 (10-12.9) μm and with a shape index of 1.25 (1-1.3). The sporulated oocysts have no micropyle but enclose one large rectangular-shaped polar granule and an oocyst residuum. The oocysts have a distinct two-layered wall, which is ~1.7 μm thick. The outer layer has a smooth texture; it fills ~¾ of the total thickness and appears bicolored. The sporocysts are boat-shaped, of about 10 (9-11) × 4 (4-4.7) μm; their average shape-index is 2.5 μm with a small pointed Stieda body and a smooth, thin single-layered wall. No substieda body is detected. The sporocysts contain numerous, nearly uniform granular residua. The sporozoites are banana-shaped, 6 × 3 μm and each has two different-sized refractile bodies.

Estudi de nusos rígids prefabricats de formigó

Una de les principals limitacions de les edificacions industrialitzades resoltes amb prefabricat de formigó, és que els nusos que defineixen les interseccions dels seus elements són articulacions, provocant diferències importants del model estructural d’una obra resolta “in situ” on els nusos poden ser considerats encastaments elàstics. Aquest projecte proposa fer un pas més en aquesta limitació exposada i plantejar sistemes de nusos rígids, resolts amb el propi prefabricat que permetin variar el model de nusos articulats a rígids. Això augmentarà el grau d’hiperestaticitat de l’estructura, redistribuint els esforços en els seus elements, disminuint les deformacions i les longituds de vinclament dels pilars. L’objecte del treball és definir la millora que aporta la utilització de nusos rígids en el càlcul estructural, basada en una disminució de sol·licitacions al llarg del pilar, possibilitat de reducció de secció de pilars, reducció de l’armadura necessària en pilars i jàsseres, i finalment, un estalvi econòmic. Partirem d’un edifici d’habitatges d’ús residencial PB+3 de planta rectangular de 24·11 m i de 13,5 m d’altura. Aquesta tipologia d’edifici serà el punt de partida per al plantejament, sobre d’aquesta base, de 3 models estructurals diferents, amb la intenció de satisfer de forma raonada i minuciosa 3 plantejaments estàticament diferents

Portal web per la localitzacó de restaurants

Desenvolupament,anàlisi, disseny i implementació d’un portal web, tipus cercador, per la recerca i localització d’establiments tipus restaurant, bars, bufets, etc,. Per altra banda es pretén oferir un sistema de gestió d’informació on les empreses del sector gastronòmic puguin mostrar la seva informació i la seva oferta

Effective diagnosis of Alzheimer's disease by means of large margin-based methodology.

BACKGROUND Functional brain images such as Single-Photon Emission Computed Tomography (SPECT) and Positron Emission Tomography (PET) have been widely used to guide the clinicians in the Alzheimer's Disease (AD) diagnosis. However, the subjectivity involved in their evaluation has favoured the development of Computer Aided Diagnosis (CAD) Systems. METHODS It is proposed a novel combination of feature extraction techniques to improve the diagnosis of AD. Firstly, Regions of Interest (ROIs) are selected by means of a t-test carried out on 3D Normalised Mean Square Error (NMSE) features restricted to be located within a predefined brain activation mask. In order to address the small sample-size problem, the dimension of the feature space was further reduced by: Large Margin Nearest Neighbours using a rectangular matrix (LMNN-RECT), Principal Component Analysis (PCA) or Partial Least Squares (PLS) (the two latter also analysed with a LMNN transformation). Regarding the classifiers, kernel Support Vector Machines (SVMs) and LMNN using Euclidean, Mahalanobis and Energy-based metrics were compared. RESULTS Several experiments were conducted in order to evaluate the proposed LMNN-based feature extraction algorithms and its benefits as: i) linear transformation of the PLS or PCA reduced data, ii) feature reduction technique, and iii) classifier (with Euclidean, Mahalanobis or Energy-based methodology). The system was evaluated by means of k-fold cross-validation yielding accuracy, sensitivity and specificity values of 92.78%, 91.07% and 95.12% (for SPECT) and 90.67%, 88% and 93.33% (for PET), respectively, when a NMSE-PLS-LMNN feature extraction method was used in combination with a SVM classifier, thus outperforming recently reported baseline methods. CONCLUSIONS All the proposed methods turned out to be a valid solution for the presented problem. One of the advances is the robustness of the LMNN algorithm that not only provides higher separation rate between the classes but it also makes (in combination with NMSE and PLS) this rate variation more stable. In addition, their generalization ability is another advance since several experiments were performed on two image modalities (SPECT and PET).

Regional abundance of on-premise outlets and drinking patterns among Swiss young men: District level analyses and geographic adjustments.

INTRODUCTION AND AIMS: This study investigated the associations of alcohol outlet density with specific alcohol outcomes (consumption and consequences) among young men in Switzerland and assessed the possible geographically related variations. DESIGN AND METHODS: Alcohol consumption and drinking consequences were measured in a 2010-2011 study assessing substance use risk factors (Cohort Study on Substance Use Risk Factors) among 5519 young Swiss men. Outlet density was based on the number of on- and off-premise outlets in the district of residence. Linear regression models were run separately for drinking level, heavy episodic drinking (HED) and drinking consequences. Geographically weighted regression models were estimated when variations were recorded at the district level. RESULTS: No consistent association was found between outlet density and drinking consequences. A positive association between drinking level and HED with on-premise outlet density was found. Geographically weighted regressions were run for drinking level and HED. The predicted values for HED were higher in the southwest part of Switzerland (French-speaking part). DISCUSSION AND CONCLUSIONS: Among Swiss young men, the density of outlets and, in particular, the abundance of bars, clubs and other on-premise outlets was associated with drinking level and HED, even when drinking consequences were not significantly affected. These findings support the idea that outlet density needs to be considered when developing and implementing regional-based prevention initiatives. [Astudillo M, Kuendig H, Centeno-Gil A, Wicki M, Gmel G. Regional abundance of on-premise outlets and drinking patterns among Swiss young men: District level analyses and geographic adjustments. Drug Alcohol Rev 2014;33:526-33].

Autoclau pel processament de materials compòsits

Disseny d’un autoclau pel processat de materials compòsits, seguint les especificacions de disseny següents: Diàmetre interior útil: 1500mm, Longitud interior útil 3500mm, Pressió de treball: 12 bars, Temperatura de treball: 250º. A més a més, el sistema ha de disposar en el seu interior de connexions per fer el buit i s’ha d’assegurar l’homogeneïtat tèrmica recirculant l’aire durant el procés

Nuevo disipador para edificación sismorresistente. 1ª parte: caracterización y modelos de predicción

A new energy dissipator, based on yielding of steel under shear response, has been developed and recently tested. It is H shaped and web stiffened. Yielding moin part is mechanized from one piece of rectangular shoped steel bar. Its conception let obtain thin and well-stiffened web cross sections without welded parts. Main experimentally obtained charecteristics are a yielding point near 0.5 mm of displacement, yielding loads between 14 kN and 20 kN and a dissipated energy, before damage appears in the web, from 10 kJ to 21 kJ. All tested specimens have developed large deformations without web buckling. Whe web degradation appers, flanges and stiffeners keep dissipating an important amount of energy. Proposed numerical models and simple mathematical expressions offer well correlated results when compared to the experimental ones

Dowel Bar Optimization: Phases I and II, October 2001

America’s roadways are in serious need of repair. According to the American Society of Civil Engineers (ASCE), one-third of the nation’s roads are in poor or mediocre condition. ASCE has estimated that under these circumstances American drivers will sacrifice $5.8 billion and as many as 13,800 fatalities a year from 1999 to 2001 ( 1). A large factor in the deterioration of these roads is a result of how well the steel reinforcement transfers loads across the concrete slabs. Fabricating this reinforcement using a shape conducive to transferring these loads will help to aid in minimizing roadway damage. Load transfer within a series of concrete slabs takes place across the joints. For a typical concrete paved road, these joints are approximately 1/8-inch gaps between two adjacent slabs. Dowel bars are located at these joints and used to transfer load from one slab to its adjacent slabs. As long as the dowel bar is completely surrounded by concrete no problems will occur. However, when the hole starts to oblong a void space is created and difficulties can arise. This void space is formed due to a stress concentration where the dowel contacts the concrete. Over time, the repeated process of traffic traveling over the joint crushes the concrete surrounding the dowel bar and causes a void in the concrete. This void inhibits the dowel’s ability to effectively transfer load across the joint. Furthermore, this void gives water and other particles a place to collect that will eventually corrode and potentially bind or lock the joint so that no thermal expansion is allowed. Once there is no longer load transferred across the joint, the load is transferred to the foundation and differential settlement of the adjacent slabs will occur.