Sickness and Aggressive Behavior in Dominant and Subordinate Mice

Sick animals show a set of organized behavioral changes (sickness behavior), which is the result of a motivational re-organization of the behavior as a whole. Sickness behavior display can be influenced by the social context. In this work, we sought to investigate the regulation of sickness behavior within a pair of mice in the presence of an intruder mouse. Dominant and subordinate mice were treated with the bacterial endotoxin lipopolysaccharide (LPS) and were challenged with the presence of an intruder mouse. LPS effects depended on ranking and social context. Even though dominant mice displayed more agonistic interaction towards the intruder, subordinate mice displayed agonistic behavior towards the intruder when their dominant companion was treated with LPS. The results show that, not only sickness behavior is differentially expressed among different social ranks, but also that sickness behavior is related to different reactions among surrounding animals. These data are relevant for a biological approach to the relation between sickness behavior and social behavior.

Direct comparison of the bond strength results of the different test methods: A critical literature review

Objective. The goal of this paper is to undertake a literature search collecting all dentin bond strength data obtained for six adhesives with four tests ( shear, microshear, tensile and microtensile) and to critically analyze the results with respect to average bond strength, coefficient of variation, mode of failure and product ranking. Method. A PubMed search was carried out for the years between 1998 and 2009 identifying publications on bond strength measurements of resin composite to dentin using four tests: shear, tensile, microshear and microtensile. The six adhesive resins were selected covering three step systems ( OptiBond FL, Scotch Bond Multi-Purpose Plus), two-step (Prime & Bond NT, Single Bond, Clear. l SE Bond) and one step (Adper Prompt L Pop). Results. Pooling results from 147 references showed an ongoing high scatter in the bond strength data regardless which adhesive and which bond test was used. Coefficients of variation remained high (20-50%) even with the microbond test. The reported modes of failure for all tests still included high number of cohesive failures. The ranking seemed to be dependant on the test used. Significance. The scatter in dentin bond strength data remains regardless which test is used confirming Finite Element Analysis predicting non-uniform stress distributions due to a number of geometrical, loading, material properties and specimens preparation variables. This reopens the question whether, an interfacial fracture mechanics approach to analyze the dentin - adhesive bond is not more appropriate for obtaining better agreement among dentin bond related papers. (C) 2009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Influence of leucite content on slow crack growth of dental porcelains

Objectives. To determine the stress corrosion susceptibility coefficient, n, of seven dental porcelains (A: Ceramco I; B: Ceramco-II; C: Ceramco-III; D: d.Sign; E: Cerabien; F: Vitadur-Alpha; and G: Ultropaline) after aging in air or artificial saliva, and correlate results with leucite content (LC). Methods. Bars were fired according to manufacturers` instructions and polished before induction of cracks by a Vickers indenter (19.6 N, 20 s). Four specimens were stored in air/room temperature, and three in saliva/37 degrees C. Five indentations were made per specimen and crack lengths measured at the following times: similar to 0; 1; 3; 10; 30; 100; 300; 1000 and 3000 h. The stress corrosion coefficient n was calculated by linear regression analysis after plotting crack length as a function of time, considering that the slope of the curve was (2/(3n + 2)]. Microstructural analysis was performed to determine LC. Results. LC of the porcelains were 22% (A and B); 6% (C); 15% (D); 0% (E and F); and 13% (G). Except for porcelains A and D, all materials showed a decrease in their n values when stored in artificial saliva. However, the decrease was more pronounced for porcelains B, F, and G. Ranking of materials varied according to storage media (in air, porcelain G showed higher n compared to A, while in saliva both showed similar coefficients). No correlation was found between n values and LC in air or saliva. Significance. Storage media influenced the n value obtained for most of the materials. LC did not affect resistance to slow crack growth regardless of the test environment. (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Polymerization stress of resin composites as a function of system compliance

Objectives. Evaluate the effect of testing system compliance on polymerization stress and stress distribution of composites. Methods. Composites tested were Filtek Z250 (FZ), Herculite (HL), Tetric Ceram (TC), Helio Fill-AP (HF) and Heliomolar (HM). Stress was determined in 1-mm thick specimens, inserted between two rods of either poly(methyl methacrylate), PMMA, or glass. Experimental nominal stress (sigma(exp)) was calculated by dividing the maximum force recorded 5 min after photoactivation by the cross-sectional area of the rod. Composites` elastic modulus (E) was obtained by three-point bending. Data were submitted to one-way ANOVA/Tukey`s test (alpha = 0.05). Stress distribution on longitudinal (sigma(y)) and transverse (sigma(x)) axes of models representing the composites with the highest and lowest E (FZ and HM, respectively) were evaluated by finite element analysis (FEA). Results. sigma(exp) ranged from 5.5 to 8.8 MPa in glass and from 2.6 to 3.4 MPa in PMMA. Composite ranking was not identical in both substrates, since FZ showed or sigma(exp) statistically higher than HM in glass, while in PMMA FZ showed values similar to the other composites. A strong correlation was found between stress reduction (%) from glass to PMMA and composite`s E (r(2) = 0.946). FEA revealed that system compliance was influenced by the composite (FZ led to higher compliance than HM). sigma(x) distribution was similar in both substrates, while cry distribution showed larger areas of compressive stresses in specimens built on PMMA. Significance. sigma(exp) determined in PMMA was 53-68% lower than in glass. Composite ranking varied slightly due to differences in substrates` longitudinal and transverse deformation. (c) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Public choice of species for the ark: Phylogenetic similarity and preferred wildlife species for survival

Humans play a role in deciding the fate of species in the current extinction wave. Because of the previous Similarity Principle, physical attractiveness and likeability, it has been argued that public choice favours the survival of species that satisfy these criteria at the expense of other species. This paper empirically tests this argument by considering a hypothetical ‘Ark’ situation. Surveys of 204 members of the Australian public inquired whether they are in favour of the survival of each of 24 native mammal, bird and reptile species (prior to and after information provision about each species). The species were ranked by percentage of ‘yes’ votes received. Species composition by taxon in various fractions of the ranking was determined. If the previous Similarity Principle holds, mammals should rank highly and dominate the top fractions of animals saved in the hierarchical list. We find that although mammals would be over-represented in the ‘Ark’, birds and reptiles are unlikely to be excluded when social choice is based on numbers ‘voting’ for the survival of each species. Support for the previous Similarity Principle is apparent particularly after information provision. Public policy implications of this are noted and recommendations are given.

Adolescents' perceptions of social status: Development and evaluation of a new indicator

Objective. Eliminating health disparities, including those that are a result of socioeconomic status (SES), is one of the overarching goals of Healthy People 2010. This article reports on the development of a new, adolescent-specific measure of subjective social status (SSS) and on initial exploratory analyses of the relationship of SSS to adolescents' physical and psychological health. Methods. A cross-sectional study of 10 843 adolescents and a subsample of 166 paired adolescent/mother dyads who participated in the Growing Up Today Study was conducted. The newly developed MacArthur Scale of Subjective Social Status (10-point scale) was used to measure SSS. Paternal education was the measure of SES. Indicators of psychological and physical health included depressive symptoms and obesity, respectively. Linear regression analyses determined the association of SSS to depressive symptoms, and logistic regression determined the association of SSS to overweight and obesity, controlling for sociodemographic factors and SES. Results. Mean society ladder ranking, a subjective measure of SES, was 7.2 ± 1.3. Mean community ladder ranking, a measure of perceived placement in the school community, was 7.6 ± 1.7. Reliability of the instrument was excellent: the intraclass correlation coefficient was 0.73 for the society ladder and 0.79 for the community ladder. Adolescents had higher society ladder rankings than their mothers (µteen = 7.2 ± 1.3 vs µmom = 6.8 ± 1.2; P = .002). Older adolescents' perceptions of familial placement in society were more closely correlated with maternal subjective perceptions of placement than those of younger adolescents (Spearman's rhoteens

A methodology for analysis of sugarcane productivity trends - I. Analysis across districts

Historically, few articles have addressed the use of district level mill production data for analysing the effect of varietal change on sugarcane productivity trends. This appears to be due to lack of compiled district data sets and appropriate methods by which to analyse these data. Recently, varietal data on tonnes of sugarcane per hectare (TCH), sugar content (CCS), and their product, tonnes of sugar content per hectare (TSH) on a district basis, have been compiled. This study was conducted to develop a methodology for regular analysis of such data from mill districts to assess productivity trends over time, accounting for variety and variety x environment interaction effects for 3 mill districts (Mulgrave, Babinda, and Tully) from 1958 to 1995. Restricted maximum likelihood methodology was used to analyse the district level data and best linear unbiased predictors for random effects, and best linear unbiased estimates for fixed effects were computed in a mixed model analysis. In the combined analysis over districts, Q124 was the top ranking variety for TCH, and Q120 was top ranking for both CCS and TSH. Overall production for TCH increased over the 38-year period investigated. Some of this increase can be attributed to varietal improvement, although the predictors for TCH have shown little progress since the introduction of Q99 in 1976. Although smaller gains have been made in varietal improvement for CCS, overall production for CCS decreased over the 38 years due to non-varietal factors. Varietal improvement in TSH appears to have peaked in the mid-1980s. Overall production for TSH remained stable over time due to the varietal increase in TCH and the non-varietal decrease in CCS.

Slagging propensities of blended coals

This paper presents the experimental results on the slagging propensity of three pairs of blended coals tested in the Australian Coal Industry Research Laboratory furnace. The results showed that none of the coals or blends produced strongly molten deposit. At worst, the deposits contained some moderately sintered material. Most of the blends have (slightly) worse slagging behavior than the component coals. In order to rank the slagging propensity numerically, we defined the minimum heat flux ratio and total heat flux ratio based on the heat flux profiles. They are better in ranking the slagging propensities than other measures such as the build-up rate and visual physical characteristics. The Fe2O3/CaO molar ratio correlates the slagging propensity for five coals and six blends of this study. The worst slagging occurs when the ratio approaches 1.0. This ratio provides explanation of why the blends had worse slagging than the component coals for the pairs of blends: A-B and C-D. However, we note that there are causes of slagging other than the Fe2O3/CaO molar ratio. (C) 2001 Elsevier Science Ltd. All rights reserved.

Techniques to determine ignition, flame stability and burnout of blended coals in p.f. power station boilers

The blending of coals has become popular to improve the performance of coals, to meet specifications of power plants and, to reduce the cost of coals, This article reviews the results and provides new information on ignition, flame stability, and carbon burnout studies of blended coals. The reviewed studies were conducted in laboratory-, pilot-, and full-scale facilities. The new information was taken in pilot-scale studies. The results generally show that blending a high-volatile coal with a low-volatile coal or anthracite can improve the ignition, flame stability and burnout of the blends. This paper discusses two general methods to predict the performance of blended coals: (1) experiment; and (2) indices. Laboratory- and pilot-scale tests, at least, provide a relative ranking of the combustion performance of coal/blends in power station boilers. Several indices, volatile matter content, heating value and a maceral index, can be used to predict the relative ranking of ignitability and flame stability of coals and blends. The maceral index, fuel ratio, and vitrinite reflectance can also be used to predict the absolute carbon burnout of coal and blends within limits. (C) 2000 Elsevier Science Ltd. All rights reserved.

The effects of temperature on the growth, survival and biomass of different families of juvenile Penaeus japonicus Bate

Variation in the growth, survival and change in total biomass (termed biomass increase) of different families of juvenile Penaeus japonicus was investigated over a range of temperatures in controlled laboratory experiments. In the first experiment, the effects of temperature on six families of juveniles were examined over a broad range of temperatures (24 to 30 degreesC). In the second experiment, the effects of temperature on six more families of juveniles were examined over a narrower range of temperatures (27.5 to 31.2 degreesC). Over the broad temperature range, mean growth and biomass increase were highest at 27 degreesC and mean survival was highest at 24 degreesC. Mean growth was lowest at 24 degreesC, whilst survival and biomass increase were lowest at 30 degreesC. However, there was a significant interaction between family and temperature, with some families tolerating a broader range of temperatures than others. As a result, the ranking of families in relation to growth, survival and biomass increase changed at each temperature. This effect was more pronounced for survival than for growth. Over the narrower range, temperature significantly affected growth, survival and biomass increase, but there was no significant interaction between family and temperature. Growth, survival and biomass increase were significantly lower at 31.2 than at 27.5 and 29.2 degreesC. These results suggest that if grow-out conditions for P. japonicus vary by more than a few degrees, interactions between family and temperature could affect the efficiency of selection. The results also suggest that the family x temperature interaction may have a more pronounced effect on survival than on growth. Crown Copyright (C) 2002 Published by Elsevier Science B.V. All rights reserved.

Leaf water potential and osmotic adjustment as physiological traits to improve drought tolerance in rice

A sample of recombinant inbred lines (RILs) was derived from a bi-parental cross between Lemont and BK88-BR6, which contrasted in maintenance of leaf water potential (LWP) and expression of osmotic adjustment (OA). Genotypic variation for LWP and OA, and their associations with yield determination under water deficit, was studied in a series of five field experiments. Genotypic variation in the maintenance of high LWP was consistent across water deficit experiments. In the determination of genotypic variation in the maintenance of LWP, rate of water deficit was not an important factor influencing ranking, but degree of water deficit, and phenological development stage were important, particularly around heading. Genotypic variation in expression of OA was also observed under water deficits during both vegetative and flowering stages but ranking was inconsistent across experiments. This was in part because of large experimental errors associated with its measurement, but also because the expression of OA was associated with extent of decline of LWP. The relationship between OA and LWP was demonstrated when data were combined across experiments for vegetative and flowering stages. Under water-limited conditions around flowering, grain yield reduction was mainly due to a increased spikelet sterility. Variation in OA was not related to grain yield nor yield components. There were however, negative phenotypic and genetic correlations between LWP and percentage spikelet sterility measured at flowering stage on panicles at the same development stage during a water deficit treatment. This suggests that traits contributing to the maintenance of high LWP minimized the effects of water deficit on spikelet sterility and consequently grain yield. (C) 2002 Elsevier Science B.V. All rights reserved.

O est??gio do governo eletr??nico no Brasil em rela????o ao contexto mundial

O artigo explora o est??gio de implementa????o do governo eletr??nico no Brasil, apoiando-se no ranking das Na????es Unidas para discutir o posicionamento do pa??s diante do contexto global de e-gov. ?? apresentado o conceito de governo eletr??nico, sendo abordados, em seguida, os programas do governo federal brasileiro relacionados com essa pol??tica. Conclui-se que o Brasil alcan??ou, at?? 2002, boas avalia????es em seu programa de e-gov como resultado, especialmente, da implementa????o de alguns ???casos de sucesso??? ??? como o Comprasnet e o imposto de renda pela Internet. A partir de 2003, entretanto, sua trajet??ria passou a ser descendente, cedendo lugar a outros pa??ses que se encontravam, anteriormente, em posi????es inferiores no ranking. Ao final do artigo ?? feita uma reflex??o sobre as perspectivas para o e-gov no pa??s, vislumbrando-se um futuro capaz de recolocar o Brasil em posi????o mais pr??xima a dos pa??ses que possuem programas de e-governo em est??gios mais avan??ados de desenvolvimento.

A representação social da violência de gênero contra a mulher no Espírito Santo

O objetivo principal deste trabalho é analisar como os meios de comunicação ajudam a construir a representação social da violência de gênero contra a mulher no Espírito Santo, que lidera o ranking nacional de feminicídios, com taxa de 9,8 homicídios para cada 100 mil mulheres. Elegemos como corpus de pesquisa notícias sobre violência de gênero no ES, veiculadas no ano de 2013, nos jornais A Gazeta e A Tribuna. Em hipótese, acreditamos que essas notícias ajudam a construir representações sociais acerca da violência de gênero a partir da apresentação de estereótipos de vítima e agressor na sociedade, da individualização do problema da violência, da associação desse problema às classes sociais menos privilegiadas e da apresentação do crime de violência de gênero como crime passional. O estudo dessas notícias apresenta-se como algo complexo, do qual não participam apenas informações de ordem linguística, mas também de carácter social, histórico, cultural e cognitivo, uma vez que a análise discursiva não pode ser dissociada do contexto, dos atores sociais e das instituições envolvidas na produção da notícia, bem como das ideologias presentes nesse processo. Por esse motivo, assumimos como base teórica de nossa investigação uma proposta multidisciplinar: a Teoria Sociocognitiva de Teun A. van Dijk (1999a; 2011a; 2012; 2014b). Ademais, contamos com as contribuições dos estudos sobre gênero e discurso de Cameron (1985, 1997), Wodak (1997), West, Lazar e Kramarae (2000), Fernández Díaz (2003), Lazar (1993, 2005, 2007), Magalhães (2005; 2009), Heberle, Ostermann e Figueiredo (2006). Além das análises discursivo-analíticas, também utilizamos o programa de linguística de corpus WordSmith Tools para realizar análises quantitativas. Os resultados das análises nos levaram à confirmação das hipóteses iniciais: o discurso das notícias reforça estereótipos de vítima e agressor, típicos de uma estrutura social patriarcal, na qual é atribuída à vítima ou aos vícios (álcool e drogas) a responsabilidade da violência sofrida; além disso, a violência de gênero é apresentada como um problema individual e associada às classes sociais menos favorecidas; e, por último, o discurso das notícias apresenta grande parte dos crimes de violência de gênero como crimes passionais.

Dinâmica da estratégia logística em empresas brasileiras

O objetivo do artigo é analisar a estratégia logística das empresas brasileiras a partir da mensuração do impacto de diferentes características do negócio sobre as principais decisões de produção e distribuição física de produtos acabados. Foi conduzida uma pesquisa de campo em empresas listadas no Ranking Exame para confrontar as quatro políticas propostas por Pagh e Cooper (1998), derivadas das combinações entre centralizar/descentralizar os estoques e produzir para estoque/produzir contra-pedido, com diversas características do produto, da operação e da demanda. Técnicas de análise multivariada, como as análises de regressão logística simples e multinomial, foram empregadas, permitindo o desenvolvimento de diversos modelos quantitativos. Seus resultados apontam para avanços acadêmicos e gerenciais, como a quantificação e hierarquização de relações empíricas descritas na literatura e o direcionamento da atenção gerencial para as variáveis relevantes à decisão. Os modelos também permitem avaliar a adequação dessas políticas para diferentes valores do tempo de entrega, da variabilidade das vendas e do grau de obsolescência dos produtos.

O efeito país sobre o desempenho da firma: uma abordagem multinível

Este trabalho analisou a influência do país sobre o desempenho das firmas. A análise empírica tomou por base uma amostra de 83.641 observações de 10.927 firmas em 37 países e 224 indústrias, em um período de 10 anos. Um modelo linear hierárquico de três níveis com classificação cruzada permitiu identificar que a importância relativa dos efeitos país, indústria e interação indústria-país é semelhante e, em conjunto, aproximadamente da mesma magnitude do efeito firma. Além de estimar a importância do efeito país, o trabalho analisou a infl uência individual de cada país sobre o desempenho das fi rmas, o que permitiu a elaboração de um ranking de países com base na lucratividade das fi rmas.