Açaí (Euterpe oleracea mart.) e camu-camu (Myrciaria dubia (H.B.K.) Mc Vaugh) possuem ação anti anêmica?

Avaliou-se o impacto da utilização do açaí e camu-camu em pré-escolares de uma Unidade Filantrópica de Manaus-AM. Foram selecionadas 85 crianças voluntárias, de dois a seis anos incompletos, de ambos os sexos, distribuídas aleatoriamente em 5 grupos, tendo como fonte de ferro e vitamina C: açaí e açaí + camu-camu, perfazendo um total de 2 mg de ferro e 40 mg de ácido ascórbico, assim como o ferro aminoácido quelato na concentração de 1 e 2 mg de ferro. O ferro foi distribuído diariamente na colação por um período de 120 dias. Na caracterização da anemia considerou-se o ponto de corte de hemoglobina <11g/dL. Os resultados demonstraram que de um universo de 85 crianças 6 (7%) apresentaram um quadro de desnutrição crônica, sendo ao final da intervenção reduzido para 4 (4,7%). O maior impacto da utilização do açaí foi como fonte energética, refletido no ganho de peso significativo das crianças (1,76 kg), mesmo quando adicionado de camu-camu (1,69 kg). Em relação a concentração de hemoglobina, não foi constatada diferença significativa entre as crianças dos diferentes grupos, independente da fonte de ferro: açaí (0,71 g/dL); açaí + camu-camu (0,60 g/dL), Ferro 2 mg (0,88 g/dL); água (0,85 g/ dL) e Ferro 1 mg (0,54 g/dL). Entretanto, a recuperação de crianças anêmicas foi maior no grupo que recebeu ferro aminoácido quelato na concentração de 2 mg de ferro. Conclui-se que o açaí tem um grande potencial como fonte energética e pouca expressividade como fonte de ferro, mesmo adicionado de camu-camu.

Os Óleos Essenciais de Piper reticulatum L. e P. crassinervium H. B. K.

Os óleos essenciais das folhas e galhos finos de Piper reticulatum e de P. crassinervium, coletados na região norte do Brasil, foram obtidos por arraste à vapor e analisados através de GC/MS. O óleo de P. reticulatum é constituido principalmente por β-elemeno (24,6%) e β-cariofileno (16,7%). Os principais compostos identificados no óleo de P. crassinervium foramβ-cariofileno (17,7%), γ-elemeno (14,4%) e β-elemeno (10,9%).

Ocorrência de Tuthillia cognata Hodkinson, Brown & Burckhardt, 1986(Hemiptera: Homoptera, Psyllidae) em plantios experimentais de camu-camu Myrciaria dubia (H.B.K.) Mc Vaugh em Manaus (Amazonas, Brasil)

O cultivo de camu-camu Myrciaria dubia (H.B.K.) Mc Vaugh tem apresentado inúmeros problemas fitossanitários, dentre os quais, Tuthillia cognata Hodkinson et al. (Hemiptera: Homoptera, Psyllidae), que constantemente é citada como praga secundária. Os objetivos deste estudo foram determinar o nível e a intensidade de infestação (%) por T. cognata e estudar aspectos do ciclo biológico e do comportamento de T. cognata, em plantios experimentais de camu-camu. Foram selecionados, de forma aleatória, 17 e 14 exemplares nos plantios I e II, respectivamente. Para cada uma das variáveis estudadas, foram calculados a média aritmética, o desviopadrão, a variância e a amplitude de variação. Foi verificado um nível de infestação de 82% (plantio I) e 57% (plantio II), uma intensidade de infestação de 94% (plantio I) e 75% (plantio II) e uma média de seis ninfas/folha em cada plantio, o que indica que T. cognata representa uma das pragas-chave dessa cultura. Foram observados adultos de Chrysoperla sp. (Neuroptera: Chrysopidae) e ninfas de Reduviidae (Hemiptera: Heteroptera), que podem atuar como prováveis agentes de controle biológico de T. cognata.

Poly-N-acetyl glucosamine expression in Staphylococcus epidermidis biofilm cells affects the immune response and promotes tissue pathology in infected hosts

Staphylococcus epidermidis is a biofilm - forming bacterium and a leading etiological agent of nosocomial infections. The ability to establish biofilms on indwelling medical devices is a key virulence factor for this bacterium. Still, the influence of poly - N - acetyl glucosamine (PNAG), the major component of the extracellular biofilm matrix, in the host immune response has been scarcely studied. Here, t h is influence was assessed in mice challenged i.p. with PNAG - p roducing (WT) and isogenic - mutant lacking PNAG (M10) bacteria grown in biofilm - inducing conditions. Faster bacterial clearance was observed in the mice infected with WT bacteria than in M10 - infected counterparts , which w as accompanied by earlier neutrophil recruitment and higher IL - 6 production. Interestingly, in the WT - infected mice, but not in those infected with M10 , elevated serum IL - 10 was detected . To further study the effe ct of PNAG in the immune response, mice were primed with WT or M10 biofilm bacteria and subsequently infected with WT biofilm - released cells. WT - primed mice presented a higher frequency of splenic IFN - γ + and IL - 17 + CD4 + T cells, and more severe liver patho logy than M10 - primed counterparts. Nevertheless, T reg cells obtained from the WT - primed mice presented a higher suppressive function than those obtained from M10 - primed mice. This effect was abrogated when IL - 10 - deficient mice were similarly primed and infected indicating that PNAG promotes the differentiati on of highly suppressive T reg cells by a mechanism dependent on IL - 10. Altogether, these results provide evidence help ing explain ing the coexistence of inflammation and bacterial persistence often observed in biofilm - originated S. epidermidis infections

Thermal characterization of polyhydroxyalkanoates and poly(lactic acid) blends obtained by injection molding

In this work we present the thermal characterization of the full scope of polyhydroxyalcanoate and poly(lactic acid) blends obtain by injection molding. Blends of polyhydroxyalcanoate and poly(lactic acid) (PHA/PLA) were prepared in different compositions ranging from 0–100% in steps of 10%. The blends were injection molded and then characterized by differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). The increment of PHA fraction increased the degree of crystallinity of the blend and the miscibility of the base polymers as verified by the Fox model. The WAXD analysis indicates that the presence of PHA hindered the PLA crystallization. The crystallization evolution trough PHA weight fraction (wf) shows a phase inversion around 50-60%. SEM analyses confirmed that the miscibility of PHA/PLA blends increased with the incorporation of PHA and became total for values of PHA higher that 50%.

Atividade inseticida do óleo essencial de Tanaecium nocturnum (Barb. Rodr.) Bur. & K. Shum (Bignoneaceae) sobre Sitophilus zeamais Motsch. (Coleoptera: Curculionidae)

O óleo essencial extraído de folhas frescas de Tanaecium nocturnum (Barb. Rodr.) Bur.& K. Shum por destilação de arraste a vapor foi avaliado quanto à toxicidade a Sitophilus zeamais Motsch., principal praga do milho armazenado. Papel de filtro e grãos de milho foram impregnados pelo óleo para se avaliar o efeito por via de contato (papel-filtro) e fumigação, respectivamente. Para avaliação do efeito da aplicação tópica 0,5 µl das diferentes concentrações do óleo foram aplicadas em adultos do inseto. A partir de uma ampla faixa de concentrações, foram determinadas as mais promissoras para os bioensaios definitivos. Na determinação das dose/concentrações-letais (DL50 e CL50) foi utilizada a análise de Probit, realizando-se também, uma análise de regressão linear conjunta de todos os dados de mortalidade. O óleo de T. nocturnum foi considerado tóxico para S. zeamais baseado nos seguintes valores: CL50 de 14,1 ng.cm-2 e CL50 de 1.321,6 ng.g-1 de grãos para os efeitos de contacto (papel-filtro) e fumigação, respectivamente, e DL50 de 14,7 µg.mg-1 de inseto para efeito tópico. Porcentagens de mortalidade próximas a 100 % foram obtidas nas concentrações de: 2 e 5 % (m/v) (contato), 3 4, e 5 % (m/v) (fumigação) e 10 % (m/v) para o efeito de aplicação tópica. O presente estudo mostrou que o ácido cianídrico, liberado do óleo essencial de T. nocturnum por hidrólise, pode ter atividade inseticida para S. zeamais e que concentrações acima de 4 % (m/v) são promissoras no controle do inseto.

Nonsolvent induced phase separation preparation of poly(vinylidene fluoride-co-chlorotrifluoroethylene) membranes with tailored morphology, piezoelectric phase content and mechanical properties

Poly(vinylidene fluoride-co-chlorotrifluoroethylene) – P(VDF-CTFE) membranes are increasingly interesting for a wide range of applications, including battery separators, filtration membranes and biomedical applications. This work reports on the morphology, hydrophobicity, thermal and mechanical properties variation of P(VDF-CTFE) membranes processed by nonsolvent induced phase separation technique (NIPS) as a function of the main processing parameters. All membranes show a porous structure composed of large spherulites, (interconnected) micropores and/or microvoids depending on the processing conditions used that in turn affect their hydrophobicity and mechanical properties. The degree of crystallinity of the membranes remains approximately constant with a value of about 15 %, except for the membranes immediately immersed in ethanol, which is of about 23 %. In turn, the crystalline phases present in the copolymer is mainly affected by the temperature and nonsolvent characteristics of the coagulation bath, the β-phase content ranging from 33 to 100 %, depending on those processing parameters. It was show that the temperature of water-based coagulation bath plays an important role in order to produce structurally uniform and homogeneous porous membranes, which is particularly important from the point of view of technological applications.

Novel hybrid multifunctional magnetoelectric porous composite films

Novel multifunctional porous films have been developed by the integration of magnetic CoFe2O4 (CFO) nanoparticles into poly(vinylidene fluoride)-Trifuoroethylene (P(VDF-TrFE)), taking advantage of the synergies of the magnetostrictive filler and the piezoelectric polymer. The porous films show a piezoelectric response with an effective d33 coefficient of -22 pC/N-1, a maximum magnetization of 12 emu.g-1 and a maximum magnetoelectric coefficient of 9 mV.cm-1.Oe-1. In this way, a multifunctional membrane has been developed suitable for advanced applications ranging from biomedical to water treatment.

High performance electromechanical actuators based on ionic liquid/poly(vinylidene fluoride)

Due to the increasing need of low voltage actuators, independent from electrochemical processes, electroactive actuators based on poly(vinylidene fluoride) composites with 10, 25 and 40 % of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C2mim] [NTf2], ionic liquid are prepared by solvent casting and melting. We show that the charge structure of [C2mim] [NTf2] induces the complete piezoelectric -phase crystallization of the PVDF within the composite and decreases its crystallinity fraction significantly. [C2mim] [NTf2] also works as a plasticizer of PVDF, reducing the elastic modulus down to 12 % of the initial value. Moreover, the composites show significant displacement and bending under applied voltages of 2, 5 and 10 Vpp. The displacement and bending of the composite membranes are also evaluated as a function of [C2mim] [NTf2] content and sample thickness. Increasing amounts of ionic liquid result in larger deformations independently of the applied voltage.

Gd2O3: Eu Nanoparticle-Based Poly(vinylidene fluoride) Composites for Indirect X-ray Detection

Polymer based scintillator composites have been fabricated by combining poly(vinylidene fluoride) (PVDF) and Gd2O3:Eu nanoparticles (50nm). PVDF has been used since it is a flexible and stable binder matrix and highly resistance to thermal and light deterioration. Gd2O3:Eu has been selected as scintillator material due to its wide band gap, high density and suitable visible light yield. The structural, mechanical, thermal and electrical characteristics of the composites were studied as a function of filler content, together with their performance as scintillator material. The introduction of Gd2O3:Eu nanoparticles into the PVDF matrix does not influence the morphology of the polymer or the degree of crystallinity. On the other hand, an increase of the Young´s modulus with respect to PVDF matrix is observed for filler contents of 0.1-0.75 wt.%. The introduction of Gd2O3:Eu into the PVDF matrix increases dielectric constant and DC electrical conductivity as well as the visible light yield in the nanocomposite, being this increase dependent upon Gd2O3:Eu content and X-ray input power. In this way, Gd2O3:Eu/PVDF composites shows suitable characteristics to be used as X-ray radiation transducers, in particular for large area applications.

Poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) lithium-ion battery separator membranes prepared by phase inversion

Separator membranes based on poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) were prepared by solvent casting technique based on its phase diagram in N,Ndimethylformamide (DMF) solvent. The microstructure of the PVDF-CTFE separator membranes depends on the initial position (temperature and concentration) of the solution in the phase diagram of the PVDF-CTFE/DMF system. A porous microstructure is achieved for PVDF-CTFE membranes with solvent evaporation temperature up to 50 ºC for a polymer/solvent relative concentration of 20 wt%. The ionic conductivity of the separator depends on the degree of porosity and electrolyte uptake, the highest room temperature value being 1.5 mS.cm-1 for the sample with 20 wt% of polymer concentration and solvent evaporation temperature at 25 ºC saturated with 1 mol L-1 lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) in propylene carbonate (PC). This PVDF-CTFE separator membrane in Li/C-LiFePO4 half-cell shows good cyclability and rate capability, showing a discharge value after 50 cycles of 92 mAh.g-1 at 2 C, which is still 55% of the theoretical value. PVDF-CTFE separators are thus excellent candidates for high-power and safety lithium-ion batteries applications.

Phase morphology and crystallinity of poly(vinylidene fluoride)/poly(ethylene oxide) piezoelectric blend membranes

Polymer blends based on poly(vinylidene fluoride), PVDF and poly(ethylene oxide), PEO, with varying compositions have been prepared by solvent casting, the polymer blend films being obtained from solutions in dimethyl formamide at 70ºC. Under these conditions PVDF crystallizes from solution while PEO remains in the molten state. Then, PEO crystallizes from the melt confined by PVDF crystalls during cooling to room temperature. PVDF crystallized from DMF solutions adopt predominantly the electroactive β-phase (85%). Nevertheless when PEO is introduced in the polymer blend the β-phase content decreases slightly to 70%. The piezoelectric coefficient (d33) in pristine PVDF is -5 pC/N and decreases with increasing PEO content in the PVDF/PEO blends. Blend morphology, observed by electron and atomic force microscopy, shows the confinement of PEO between the already formed PVDF crystals. On the other hand the sample contraction when PEO is extracted from the blend with water (which is not a solvent for PVDF) allows proving the co-continuity of both phases in the blend. PEO crystallization kinetics have been characterized by DSC both in isothermal and cooling scans experiments showing important differences in crystalline fraction and crystallization rate with sample composition.

Effect of ionic liquid anion and cation on the physico-chemical properties of poly(vinylidene fluoride)/ionic liquid blends

Poly(vinylidene fluoride), PVDF, has been blended with different ionic liquids (IL) in order to evaluate the effect of the different IL anions and cations on the electroative -phase, thermal, mechanical and electrical properties of the polymer blend. [C2MIM][Cl], [C6MIM][Cl], [C10MIM][Cl], [C2MIM][NTf2], [C6MIM][NTf2], [C10MIM][NTf2] have been selected and were introduced in the polymer at a weight percentage of 40 wt%. It was found that the incorporation of ILs into the PVDF matrix leads to an increase of the -phase content due to the strong electrostatic interactions between the dipolar moments of PVDF and the ILs. Further, the incorporation of ILs into PVDF strongly decreases the elastic modulus and increases the electrical conductivity of the blend with respect to the pure polymer matrix, all these effects being accompanied by a modification of the crystallization kinetics, as indicated by the modified spherulitic microstructure. Thus, novel PVDF/IL blends films with high transparency, excellent antistatic properties, and highly polar crystal form fraction were successfully achieved.

Effect of the degree of porosity on the performance of poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blend membranes for lithium-ion battery separators

Porous polymer membranes based on poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) copolymers, P(VDF-TrFE)/PEO, are prepared through the, from partial to total, elimination of PEO, leading to interconnected micropores in the polymer blends. Electrolyte uptake, thermal and mechanical properties depend on the amount of PEO present in the polymer blend. Further, the degree of crystallinity of PEO and the elastic modulus (E´) of the polymer blend decrease with increasing PEO removal. Electrical properties of the polymer blend membranes are influenced by the porosity and are dominated by diffusion. The temperature dependence of ionic conductivity follows the Arrhenius behavior. It is the highest for the membranes with a volume fraction of pores of 44% (i.e, 90% PEO removal), reaching a value of 0.54 mS.cm-1 at room temperature. Battery performance was determined by assembling Li/C-LiFePO4 swagelok cells. The polymer blends with 90% PEO removal exhibit rate (124 mAhg-1 at C/5 and 47 mAhg-1 at 2C) and cycling capabilities suitable for lithium ion battery applications.

Tailoring microstructure and physical properties of poly(vinylidene fluoride–hexafluoropropylene) porous films

This paper presents a systematic study for the production of poly(vinylidene fluoride-hexafluoropropylene), P(VDF-HFP), porous films using solvent evaporation (SE) and non-solvent induced phase separation (NIPS) techniques. Parameters such as volume fraction of the copolymer solution, film thickness, time exposure to air, non-solvent and temperature of the coagulation bath were investigated on the morphology, crystallization and mechanical properties of the samples. Films with different porous morphologies including homogeneous pore sizes, macrovoids and spherulites were obtained depending on the processing conditions, which in turn affect the wettability and mechanical properties of the material. Knowing that the phase content of the films also depends on the processing conditions, this paper shows that P(VDF-HFP) films with tailored porous morphology, electroactive phase content, hydrophobicity, cristallinity and mechanical properties can be achieved for a specific application using the adequate SE and NIPS techniques conditions.