Effects of selected post harvest processes on brown crab (Cancerpagurus L.) and European lobster (Homarus gammarus L.) from Irish Crustacean Fisheries

The crustacean fishery is important to the socio economics of rural and island communities around Ireland; with brown crab (Cancer pagurus) and European lobster (.Homarus gammarus) being the most valuable shellfish species. Brown crab and lobster are marketed live with the majority being exported from Ireland to southern Europe. Post capture processes used in Ireland are very subjective but promote fresh, live products. Common practices used in the crustacean fishery include nicking of brown crab and long term storage of lobster. This study showed that nicking resulted in elevated mean lactate levels of 17.90% (StDev ± 1.74) and elevated mean glucose levels of 120.55 % (StDev ± 0.26) with mean circulating bacteria levels 9 times greater in nicked crab. Nicking resulted in 96.3% increase in tissue necrosis and a subsequent reduction in product quality. These factors possibly compromise the host’s defense system, which may ultimately reduce the animal’s ability to cope with additional stressors caused by post-harvest processes. Long term storage allows lobster to be stored until the market is less saturated and prices are higher. This investigation found that some lobsters contracted bacterial biofilms as a result of long term storage. Bacteria isolated from biofilms were identified as Arcobacter and Campylobacterales with identity and alignment scores of 80% andd 88% respectively.

Age, growth and reproductive biology of Plaice, (Pleuronectes platessa L.) in Irish waters, 2003-2005

The current study presents data on age and growth for plaice (Pleuronectes platessa L.) sampled between November 2003 and February 2005 in ICES areas Via (northwest coast of Ireland), Vila (Irish Sea), Vllg (Celtic Sea), VDj (southwest coast of Ireland) and VHb (west coast of Ireland), and data on the reproductive biology and maturity of plaice in ICES area Vllb (west coast of Ireland). This is the first detailed account of the biology of plaice for some of these areas. It is intended that this study will improve understanding of the life cycle of plaice and help fisheries scientists to better predict the effect of fishing effort on Irish plaice stocks. The overall length range found for plaice was 9-51.99cm TL, with a length range of 9-5 lcm TL for females and 9-40cm for males. In all ICES areas the length range for female fish was larger than for male fish. The age range of plaice sampled during this study was 1 to 16 years. In all ICES areas females had a greater range in ages and fish in the larger age groups. From analysis of length and age data it was concluded that there was a significant difference (P=0.000) in growth rate of males and females between ICES areas sampled in March 2004. The highest rate of fishing mortality was determined for ICES area Via (F=1.06) and the lowest for ICES area Vila (F=0.56). In each ICES area male and female plaice have fully recruited to the population by age 4, with the exception of females in ICES area Via, for which a tr value of 5 years was determined. Length at first maturity (L50%) was determined to be 23cm and 21cm for males and females respectively. Age at first maturity (A50%) was determined to be 3 years for both males and females. It was found that males and females in ICES areas Vllb, Vila and Via are well above the length and age at first maturity when they are recruited to the fishery. In ICES area Vllb female plaice spawn from November to March, with peak spawning occurring in February, and male plaice spawn from November to April, with peak spawning occurring in November. Spawning females had an age range of 2 to 10 years and spawning males had an age range of 2 to 7 years. From the oocyte length frequency distributions, it was determined that the plaice is a determinate batch spawner. During this investigation a total of 177 ovaries and 127 testes were staged using both macroscopic and histological criteria. The overall percentage of maturity stages which compared favorably between the two assessment methods was 22.03% for female plaice and 37.80% for male plaice. In general, the findings of this study indicate that there was a very poor match between the macroscopic and histological assessment methods. Given that the histological determination of these stages is based on the observation of a distinct set of developmental features, it is expected that it would be more accurate to use histologically assessed gonads to calculate the annual percentage maturity assessment. The biology of plaice in the areas studied is compared with previous studies of plaice in Irish and European waters.

Endogeneous matching in university-industry collaboration: Theory and empirical evidence from the UK

We develop a two-sided matching model to analyze collaboration between heterogeneousacademics and firms. We predict a positive assortative matching in terms of both scientificability and affinity for type of research, but negative assortative in terms of ability on one sideand affinity in the other. In addition, the most able and most applied academics and the mostable and most basic firms shall collaborate rather than stay independent. Our predictionsreceive strong support from the analysis of the teams of academics and firms that proposeresearch projects to the UK's Engineering and Physical Sciences Research Council.

Conduction mechanisms and charge storage in Si-nanocrystals metal-oxide-semiconductor memory devices studied with conducting atomic force microscopy

In this work, we demonstrate that conductive atomic force microscopy (C-AFM) is a very powerful tool to investigate, at the nanoscale, metal-oxide-semiconductor structures with silicon nanocrystals (Si-nc) embedded in the gate oxide as memory devices. The high lateral resolution of this technique allows us to study extremely small areas ( ~ 300nm2) and, therefore, the electrical properties of a reduced number of Si-nc. C-AFM experiments have demonstrated that Si-nc enhance the gate oxide electrical conduction due to trap-assisted tunneling. On the other hand, Si-nc can act as trapping centers. The amount of charge stored in Si-nc has been estimated through the change induced in the barrier height measured from the I-V characteristics. The results show that only ~ 20% of the Si-nc are charged, demonstrating that the electrical behavior at the nanoscale is consistent with the macroscopic characterization.

Structural and functional characterization of (110)-oriented epitaxial La2/3Ca1/3MnO3 electrodes and SrTiO3 tunnel barriers

La2/3Ca1/3MnO3 (LCMO) films have been deposited on (110)-oriented SrTiO3 (STO) substrates. X-ray diffraction and high-resolution electron microscopy reveal that the (110) LCMO films are epitaxial and anisotropically in-plane strained, with higher relaxation along the [1¿10] direction than along the [001] direction; x-ray absorption spectroscopy data signaled the existence of a single intermediate Mn3+/4+ 3d-state at the film surface. Their magnetic properties are compared to those of (001) LCMO films grown simultaneously on (001) STO substrates It is found that (110) LCMO films present a higher Curie temperature (TC) and a weaker decay of magnetization when approaching TC than their (001) LCMO counterparts. These improved films have been subsequently covered by nanometric STO layers. Conducting atomic-force experiments have shown that STO layers, as thin as 0.8 nm, grown on top of the (110) LCMO electrode, display good insulating properties. We will show that the electric conductance across (110) STO layers, exponentially depending on the barrier thickness, is tunnel-like. The barrier height in STO (110) is found to be similar to that of STO (001). These results show that the (110) LCMO electrodes can be better electrodes than (001) LCMO for magnetic tunnel junctions, and that (110) STO are suitable insulating barriers.

Transport properties across the La2/3Ca1/3MnO3/SrTiO3 heterointerface

The transport properties across La2/3Ca1/3MnO3/SrTiO3 (LCMO/STO) heterostructures with different thicknesses of the STO insulating barrier have been studied by using atomic force microscopy measurements in the current sensing (CS) mode. To avoid intrinsic problems of the CS method we have developed a nanostructured contact geometry of Au dots. The conduction process across the LCMO/STO interface exhibits the typical features of a tunneling process.

Interfacial instability induced by external fluctuations

The dynamics of an interface separating the two coexistent phases of a binary system in the presence of external fluctuations in temperature is studied. An interfacial instability is obtained for an interface that would be stable in the absence of fluctuations or in the presence of internal fluctuations. Analytical stability analysis and numerical simulations are in accordance with an explanation of these effects in terms of a quenchlike instability induced by fluctuations.

Growth of unstable interfaces in disordered media

The effects of a disordered medium in the growth of unstable interfaces are studied by means of two local models with multiplicative and additive quenched disorder, respectively. For short times and large pushing the multiplicative quenched disorder is equivalent to a time-dependent noise. In this regime, the linear dispersion relation contains a destabilizing contribution introduced by the noise. For long times, the interface always gets pinned. We model the systematics of the pinned shapes by means of an effective nonlinear model. These results show good agreement with numerical simulations. For the additive noise we find numerically that a depinning transition occurs.

Dynamical scaling of imbibition in columnar geometries

compatible with the usual nonlocal model governed by surface tension that results from a macroscopic description. To explore this discrepancy, we exhaustively analyze numerical integrations of a phase-field model with dichotomic columnar disorder. We find that two distinct behaviors are possible depending on the capillary contrast between the two values of disorder. In a high-contrast case, where interface evolution is mainly dominated by the disorder, an inherent anomalous scaling is always observed. Moreover, in agreement with experimental work, the interface motion has to be described through a local model. On the other hand, in a lower-contrast case, the interface is dominated by interfacial tension and can be well modeled by a nonlocal model. We have studied both spontaneous and forced-flow imbibition situations, giving a complete set of scaling exponents in each case, as well as a comparison to the experimental results.

Pattern formation during mesophase growth in a homologous series

Remarkable differences in the shape of the nematic-smectic-B interface in a quasi-two-dimensional geometry have been experimentally observed in three liquid crystals of very similar molecular structure, i.e., neighboring members of a homologous series. In the thermal equilibrium of the two mesophases a faceted rectanglelike shape was observed with considerably different shape anisotropies for the three homologs. Various morphologies such as dendritic, dendriticlike, and faceted shapes of the rapidly growing smectic-B germ were also observed for the three substances. Experimental results were compared with computer simulations based on the phase field model. The pattern forming behavior of a binary mixture of two homologs was also studied.

Interface dynamics in Hele-Shaw flows with centrifugal forces. Preventing cusp singularities with rotation

A class of exact solutions of Hele-Shaw flows without surface tension in a rotating cell is reported. We show that the interplay between injection and rotation modifies the scenario of formation of finite-time cusp singularities. For a subclass of solutions, we show that, for any given initial condition, there exists a critical rotation rate above which cusp formation is suppressed. We also find an exact sufficient condition to avoid cusps simultaneously for all initial conditions within the above subclass.