A study of high solids anaerobic digestion of Bucknell University food waste followed by aerobic curing

Anaerobic digestion of food scraps has the potential to accomplish waste minimization, energy production, and compost or humus production. At Bucknell University, removal of food scraps from the waste stream could reduce municipal solid waste transportation costs and landfill tipping fees, and provide methane and humus for use on campus. To determine the suitability of food waste produced at Bucknell for high-solids anaerobic digestion (HSAD), a year-long characterization study was conducted. Physical and chemical properties, waste biodegradability, and annual production of biodegradable waste were assessed. Bucknell University food and landscape waste was digested at pilot-scale for over a year to test performance at low and high loading rates, ease of operation at 20% solids, benefits of codigestion of food and landscape waste, and toprovide digestate for studies to assess the curing needs of HSAD digestate. A laboratory-scale curing study was conducted to assess the curing duration required to reduce microbial activity, phytotoxicity, and odors to acceptable levels for subsequent use ofhumus. The characteristics of Bucknell University food and landscape waste were tested approximately weekly for one year, to determine chemical oxygen demand (COD), total solids (TS), volatile solids (VS), and biodegradability (from batch digestion studies). Fats, oil, and grease and total Kjeldahl nitrogen were also tested for some food waste samples. Based on the characterization and biodegradability studies, Bucknell University dining hall food waste is a good candidate for HSAD. During batch digestion studies Bucknell University food waste produced a mean of 288 mL CH4/g COD with a 95%confidence interval of 0.06 mL CH4/g COD. The addition of landscape waste for digestion increased methane production from both food and landscape waste; however, because the landscape waste biodegradability was extremely low the increase was small.Based on an informal waste audit, Bucknell could collect up to 100 tons of food waste from dining facilities each year. The pilot-scale high-solids anaerobic digestion study confirmed that digestion ofBucknell University food waste combined with landscape waste at a low organic loading rate (OLR) of 2 g COD/L reactor volume-day is feasible. During low OLR operation, stable reactor performance was demonstrated through monitoring of biogas production and composition, reactor total and volatile solids, total and soluble chemical oxygendemand, volatile fatty acid content, pH, and bicarbonate alkalinity. Low OLR HSAD of Bucknell University food waste and landscape waste combined produced 232 L CH4/kg COD and 229 L CH4/kg VS. When OLR was increased to high loading (15 g COD/L reactor volume-day) to assess maximum loading conditions, reactor performance became unstable due to ammonia accumulation and subsequent inhibition. The methaneproduction per unit COD also decreased (to 211 L CH4/kg COD fed), although methane production per unit VS increased (to 272 L CH4/kg VS fed). The degree of ammonia inhibition was investigated through respirometry in which reactor digestate was diluted and exposed to varying concentrations of ammonia. Treatments with low ammoniaconcentrations recovered quickly from ammonia inhibition within the reactor. The post-digestion curing process was studied at laboratory-scale, to provide a preliminary assessment of curing duration. Digestate was mixed with woodchips and incubated in an insulated container at 35 °C to simulate full-scale curing self-heatingconditions. Degree of digestate stabilization was determined through oxygen uptake rates, percent O2, temperature, volatile solids, and Solvita Maturity Index. Phytotoxicity was determined through observation of volatile fatty acid and ammonia concentrations.Stabilization of organics and elimination of phytotoxic compounds (after 10–15 days of curing) preceded significant reductions of volatile sulfur compounds (hydrogen sulfide, methanethiol, and dimethyl sulfide) after 15–20 days of curing. Bucknell University food waste has high biodegradability and is suitable for high-solids anaerobic digestion; however, it has a low C:N ratio which can result in ammonia accumulation under some operating conditions. The low biodegradability of Bucknell University landscape waste limits the amount of bioavailable carbon that it can contribute, making it unsuitable for use as a cosubstrate to increase the C:N ratio of food waste. Additional research is indicated to determine other cosubstrates with higher biodegradabilities that may allow successful HSAD of Bucknell University food waste at high OLRs. Some cosubstrates to investigate are office paper, field residues, or grease trap waste. A brief curing period of less than 3 weeks was sufficient to produce viable humus from digestate produced by low OLR HSAD of food and landscape waste.

Effectiveness of healthcare waste management interventions in developing countries

Inefficiencies during the management of healthcare waste can give rise to undesirable health effects such as transmission of infections and environmental pollution within and beyond the health facilities generating these wastes. Factors such as prevalence of diseases, conflicts, and the efflux of intellectual capacity make low income countries more susceptible to these adverse health effects. The purpose of this systematic review was to describe the effectiveness of interventions geared towards better managing the generation, collection, transport, treatment and disposal of medical waste, as they have been applied in lower and middle income countries.^ Using a systematic search strategy and evaluation of study quality, this study reviewed the literature for published studies on healthcare waste management interventions carried out in developing countries, specifically the low and lower middle income countries from year 2000 to the current year. From an initially identified set of 829 studies, only three studies ultimately met all inclusion, exclusion and high quality criteria. A multi component intervention in Syrian Arab Republic, conducted in 2007 was aimed at improving waste segregation practice in a hospital setting. There was an increased use of segregation boxes and reduced rates of sharps injury among staff as a result of the intervention. Another study, conducted in 2008, trained medical students as monitors of waste segregation practice in an Indian teaching hospital. There was improved practice in wards and laboratories but not in the intensive care units. The third study, performed in 2008 in China, consisted of modification of the components of a medical waste incinerator to improve efficiency and reduce stack emissions. Gaseous pollutants emitted, except polychlorodibenzofurans (PCDF) were below US EPA permissible exposure limits. Heavy metal residues in the fly ash remained unchanged.^ Due to the paucity of well-designed studies, there is insufficient evidence in literature to conclude on the effectiveness of interventions in low income settings. There is suggestive but insufficient evident that multi-component interventions aimed at improving waste segregation through behavior modification, provision of segregation tools and training of monitors are effective in low income settings.^

Políticas territoriales y construcción del paisaje cultural : caso región Gran La Plata

El propósito es presentar las principales estrategias de ordenamiento territorial urbano puestas en práctica en los últimos quince años en el Gran La Plata, que han incidido en el paisaje cultural. Se observan tanto políticas de enfoques integrales como sectoriales, las que incorporan innovaciones en OT y proponen nuevos y/o renovados paisajes culturales y las políticas “centrales" desde las gestiones municipales. Se reflexiona sobre aportes y debilidades, incompatibilidades entre ellas, en el marco del desarrollo sustentable. La estrategia metodológica utilizada tiene un perfil cualitativo y de tipo exploratoria, con un diseño de naturaleza flexible. En el estudio de caso se identifican las modalidades de intervención en función de las transformaciones del paisaje resultante y su gestión. Tiene una fuerte orientación interpretativa y la estrategia general está orientada a conseguir una familiarización con hechos aun no suficientemente comprendidos para generar nuevas ideas que permitan realizar nuevas preguntas e hipótesis. En este marco, las políticas se tornan contradictorias, si bien han logrado modificar algunos microespacios. Se entienden más como el recorte y congelamiento/ restauración del paisaje previo que como la creación de otros renovados, nuevos y/o mejores y con valores sociales aggiornados. En lo ambiental, no han sido acompañadas por estrategias estructurantes como el arbolado urbano y disposición de los residuos sólidos urbanos.

Factors impacting the market share of Construction and Demolition (C&D) Waste recycling solutions

Current EU Directives force the Member States to assure by 2020 that 70% of the Construction and Demolition (C&D) waste is recovered instead of landfilled. While some countries have largely achieved this target, others still have a long way to go. For better understanding the differences arising from local disparities, six factors related to technical, economic, legislative and environmental aspects have been identified as crucial influences in the market share of C&D waste recycling solutions. These factors are able to identify the causes that limit the recycling rate of a certain region. Moreover, progress towards an efficient waste management can vary through the improvement of a single factor. This study provides the background for further fine-tuning the factors and their combination into a mathematical model for assessing the market share of C&D recycling solutions.

Gestão de embalagens vazias de agrotóxicos - logística reversa em pequenos municípios brasileiros: o caso do município de Bom Repouso, MG

O Brasil assumiu e mantém desde 2008 o primeiro lugar mundial em consumo de agrotóxicos e, tendo em vista este uso intensivo, é possível estimar a grande quantidade de embalagens vazias de agrotóxicos (EVAs) geradas todos os anos no país. Com a promulgação da Lei 9974 de 2000, a criação do Instituto Nacional de Processamento de Embalagens Vazias (inpEV) em 2001 e a implantação da Política Nacional de Resíduos Sólidos (PNRS) em 2010, a destinação adequada das EVAs por meio da logística reversa passou a ocorrer de maneira mais eficiente, chegando a um percentual de 94% de devolução em 2014 segundo dados do INPEV. No entanto, este processo foi originalmente concebido para atender grandes áreas rurais, com economias de escala que o favorecem, e portanto não está adequado à realidade de pequenas comunidades rurais, geralmente com infraestrutura precária e mais isoladas. Sendo assim, ainda é comum nos municípios de pequeno porte que essas embalagens sejam queimadas, armazenadas em locais não adequados ou simplesmente abandonadas no campo. Dessa forma, o objetivo deste estudo foi analisar a gestão de EVAs em pequenos municípios agrícolas brasileiros, com foco no processo de logística reversa, a partir de um estudo de caso. Este foi realizado em Bom Repouso, MG, município de 10500 habitantes, caracterizado pela produção de morango e batata, com mão de obra familiar e uso intensivo de agrotóxicos. As seguintes etapas de pesquisa foram desenvolvidas: entrevistas semiestruturadas com os atores da cadeia de logística reversa de EVAs; levantamento documental; análise comparativa entre a quantidade de embalagens vendidas e a quantidade total de embalagens devolvidas entre os anos de 2012-2013 e 2013-2014, bem como um levantamento dos agrotóxicos mais comercializados no município. Verificou-se que, no período 2012-2013, a quantidade de embalagens vendidas foi cerca de 30 vezes maior que a de embalagens devolvidas, e para o período entre 2013-2014 a mesma relação foi da ordem de 26 vezes. Além disso, a massa total de embalagens devolvidas corresponde a apenas 3,3% da massa de vendidas no período 2012-2013, e 3,8% para 2013-2014. Ou seja, aproximadamente 96% das embalagens comercializadas em ambos os períodos não foram devolvidas à central de Pouso Alegre. Além disso, há produtos extremamente tóxicos para a saúde e para o meio ambiente entre os 20 mais vendidos no município. Não estão estabelecidas políticas públicas municipais voltadas à gestão desses resíduos, como pode ser verificado através das entrevistas e do levantamento documental. Dificuldades relacionadas ao armazenamento das EVAs até o momento da devolução e seu transporte até a Central de Recolhimento foram apontadas pelos entrevistados como principais motivos para não cumprir suas responsabilidades e, consequente, descartar inadequadamente esses resíduos.

Aspectos técnicos e ambientais da incineração de resíduos sólidos urbanos: considerações sobre a proposta para São Paulo

A tecnologia de incineração no gerenciamento de resíduos sólidos urbanos é empregada de maneira intensa em diversos países do mundo. No Brasil, além da sua utilização eventual em resíduos de serviços de saúde, há uma proposta para implantação de duas usinas de grande porte visando ao tratamento térmico de resíduos sólidos domiciliares na cidade de São Paulo. Através de uma revisão bibliográfica sobre o tema, são apresentados os principais parâmetros técnicos e ambientais desta tecnologia, entre eles os mecanismos de combustão e de formação de poluentes, os tipos de equipamentos empregados, as formas de manejo e disposição de cinzas e escórias e os métodos de controle e redução de emissões atmosféricas como gases ácidos, material particulado e metais pesados. Também é feita uma revisão do atual conhecimento técnico-científico sobre dioxinas e furanos relativamente à incineração de resíduos sólidos urbanos. A partir desta base teórica pesquisada e da análise dos Estudos de Impacto Ambiental e dos Relatórios de Impacto Ambiental das usinas de incineração de Santo Amaro e Sapopemba, conclui-se que tais incineradores, na forma como são propostos, não apresentam o nível tecnológico necessário para atender às normas de operação e emissão de poluentes vigentes em países onde há legislação regulando esta atividade.

Reverse Vending Machines: A Potential Solution for the Florida Plastic Waste Management Challenge

The waste of plastic beverage bottles creates environmental problems and takes up a large volume of landfill space. The high rate of consumption of plastics in the State of Florida is challenging the disposal capacity of waste authorities. The lack of the reverse vending machines in the State of Florida, including applicable scientific or technical literature represented an opportunity for this research to discuss the applicability of this equipment as a potential solution for the management of the plastic waste in Florida. With this research document, I will propose a recycling system for plastic bottles made with PET based on the implementation of reverse vending machines, stressing the importance of the creation of policies that promote recycling and public participation.

Study of the emissions from pyrolytic and oxidative thermal decomposition of PVC

Polyvinyl chloride (PVC) is one of the plastics most extensively used due to its versatility. The demand of PVC resin in Europe during 2012 reached 5000 ktonnes1. PVC waste management is a big problem because of the high volume generated all over the world and its chlorine content. End-of-life PVC is mainly mixed with municipal solid waste (MSW) and one common disposal option for this is waste-to-energy incineration (WtE). The presence of plastics such as PVC in the fuel mix increases the heating value of the fuel. PVC has two times higher energy content than MSW ‒around 20 MJ/kg vs 10 MJ/kg, respectively. However, the high chlorine content in PVC resin, 57 wt.%, may be a source for the formation of hazardous chlorinated organic pollutants in thermal processes. Chlorine present in the feedstock of WtE plants plays an important role in the formation of (i) chlorine (Cl2) and (ii) hydrochloric gas (HCl), both of them responsible for corrosion, and (iii) chlorinated organic pollutants2. In this work, pyrolytic and oxidative thermal degradation of PVC resin were carried out in a laboratory scale reactor at 500 ºC in order to analyze the influence of the reaction atmosphere on the emissions evolved. Special emphasis was put on the analysis of chlorinated organic pollutants such as polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs) and other related compounds like polychlorobenzenes (PCBzs), polychlorophenols (PCPhs) and polycyclic aromatic hydrocarbons (PAHs). Another objective of this work was to compare the results with those of a previous work3 in which emissions at different temperatures in both pyrolysis and combustion of another PVC resin had been studied; in that case, experiments for PCDD/Fs emissions had been performed only at 850 ºC.

The combined effect of plastics and food waste accelerates the thermal decomposition of refuse-derived fuels and fuel blends

Mechanical treatments such as shredding or extrusion are applied to municipal solid wastes (MSW) to produce refuse-derived fuels (RDF). In this way, a waste fraction (mainly composed by food waste) is removed and the quality of the fuel is improved. In this research, simultaneous thermal analysis (STA) was used to investigate how different mechanical treatments applied to MSW influence the composition and combustion behaviour of fuel blends produced by combining MSW or RDF with wood in different ratios. Shredding and screening resulted in a more efficient mechanical treatment than extrusion to reduce the chlorine content in a fuel, which would improve its quality. This study revealed that when plastics and food waste are combined in the fuel matrix, the thermal decomposition of the fuels are accelerated. The combination of MSW or RDF and woody materials in a fuel blend has a positive impact on its decomposition.