The building blocks of social entrepreneurship: empirical model and framework

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

A conceptual model to approach the scaling process of social entreprises: The case of Cozinha com Alma

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Transitional dynamics of an endogenous growth model with an erosion effect

The convergence features of an Endogenous Growth model with Physical capital, Human Capital and R&D have been studied. We add an erosion effect (supported by empirical evidence) to this model, and fully characterize its convergence properties. The dynamics is described by a fourth-order system of differential equations. We show that the model converges along a one-dimensional stable manifold and that its equilibrium is saddle-path stable. We also argue that one of the implications of considering this “erosion effect” is the increase in the adherence of the model to data.

Planning and verification of multipath routing protocols

Conventionally the problem of the best path in a network refers to the shortest path problem. However, for the vast majority of networks present nowadays this solution has some limitations which directly affect their proper functioning, as well as an inefficient use of their potentialities. Problems at the level of large networks where graphs of high complexity are commonly present as well as the appearing of new services and their respective requirements, are intrinsically related to the inability of this solution. In order to overcome the needs present in these networks, a new approach to the problem of the best path must be explored. One solution that has aroused more interest in the scientific community considers the use of multiple paths between two network nodes, where they can all now be considered as the best path between those nodes. Therefore, the routing will be discontinued only by minimizing one metric, where only one path between nodes is chosen, and shall be made by the selection of one of many paths, thereby allowing the use of a greater diversity of the present paths (obviously, if the network consents). The establishment of multi-path routing in a given network has several advantages for its operation. Its use may well improve the distribution of network traffic, improve recovery time to failure, or it can still offer a greater control of the network by its administrator. These factors still have greater relevance when networks have large dimensions, as well as when their constitution is of high complexity, such as the Internet, where multiple networks managed by different entities are interconnected. A large part of the growing need to use multipath protocols is associated to the routing made based on policies. Therefore, paths with different characteristics can be considered with equal level of preference, and thus be part of the solution for the best way problem. To perform multi-path routing using protocols based only on the destination address has some limitations but it is possible. Concepts of graph theory of algebraic structures can be used to describe how the routes are calculated and classified, enabling to model the routing problem. This thesis studies and analyzes multi-path routing protocols from the known literature and derives a new algebraic condition which allows the correct operation of these protocols without any network restriction. It also develops a range of software tools that allows the planning and the respective verification/validation of new protocols models according to the study made.

How to optimize Lipton’s business model in order to stimulate tea consumption in Portugal and increase Lipton Leaf tea market share?: The importance of distribution and sales channels management in a B2B2C market

Field Lab Entrepreneurial Innovative Ventures

Fatigue life assessment of endodontic instruments subjected to multi planar curvature

This present study aimed to investigate the fatigue life of unused (new) endodontic instruments made of NiTi with control memory by Coltene™ and subjected to the multi curvature of a mandibular first molar root canal. Additionally, the instrument‟s structural behaviour was analysed through non-linear finite element analysis (FEA). The fatigue life of twelve Hyflex™ CM files was assessed while were forced to adopt a stance with multiple radius of curvature, similar to the ones usually found in a mandibular first molar root canal; nine of them were subjected to Pecking motion, a relative movement of axial type. To achieve this, it was designed an experimental setup with the aim of timing the instruments until fracture while worked inside a stainless steel mandibular first molar model with relative axial motion to simulate the pecking motion. Additionally, the model‟s root canal multi-curvature was confirmed by radiography. The non-linear finite element analysis was conducted using the computer aided design software package SolidWorks™ Simulation, in order to define the imposed displacement required by the FEA, it was necessary to model an endodontic instrument with simplified geometry using SolidWorks™ and subsequently analyse the geometry of the root canal CAD model. The experimental results shown that the instruments subjected to pecking motion displayed higher fatigue life values and higher lengths of fractured tips than those with only rotational relative movement. The finite element non-linear analyses shown, for identical conditions, maximum values for the first principal stress lower than the yield strength of the material and those were located in similar positions to the instrument‟s fracture location determined by the experimental testing results.

Search for low-scale gravity signatures in multi-jet final states with the ATLAS detector at s√ = 8 TeV

We search for evidence of physics beyond the Standard Model in the production of final states with multiple high transverse momentum jets, using 20.3 fb−1 of proton-proton collision data recorded by the ATLAS detector at s√ = 8 TeV. No excess of events beyond Standard Model expectations is observed, and upper limits on the visible cross-section for non-Standard Model production of multi-jet final states are set. Using a wide variety of models for black hole and string ball production and decay, the limit on the cross-section times acceptance is as low as 0.16 fb at the 95% CL for a minimum scalar sum of jet transverse momentum in the event of about 4.3 TeV. Using models for black hole and string ball production and decay, exclusion contours are determined as a function of the production mass threshold and the gravity scale. These limits can be interpreted in terms of lower-mass limits on black hole and string ball production that range from 4.6 to 6.2 TeV.

Search for heavy long-lived multi-charged particles in pp collisions at √s = 8 TeV using the ATLAS detector

A search for heavy long-lived multi-charged particles is performed using the ATLAS detector at the LHC. Data collected in 2012 at s√=8 TeV from pp collisions corresponding to an integrated luminosity of 20.3 fb−1 are examined. Particles producing anomalously high ionisation, consistent with long-lived massive particles with electric charges from |q|=2e to |q|=6e are searched for. No signal candidate events are observed, and 95% confidence level cross-section upper limits are interpreted as lower mass limits for a Drell--Yan production model. The mass limits range between 660 and 785 GeV.

Metabolic engineering with multi-objective optimization of kinetic models

Kinetic models have a great potential for metabolic engineering applications. They can be used for testing which genetic and regulatory modifications can increase the production of metabolites of interest, while simultaneously monitoring other key functions of the host organism. This work presents a methodology for increasing productivity in biotechnological processes exploiting dynamic models. It uses multi-objective dynamic optimization to identify the combination of targets (enzymatic modifications) and the degree of up- or down-regulation that must be performed in order to optimize a set of pre-defined performance metrics subject to process constraints. The capabilities of the approach are demonstrated on a realistic and computationally challenging application: a large-scale metabolic model of Chinese Hamster Ovary cells (CHO), which are used for antibody production in a fed-batch process. The proposed methodology manages to provide a sustained and robust growth in CHO cells, increasing productivity while simultaneously increasing biomass production, product titer, and keeping the concentrations of lactate and ammonia at low values. The approach presented here can be used for optimizing metabolic models by finding the best combination of targets and their optimal level of up/down-regulation. Furthermore, it can accommodate additional trade-offs and constraints with great flexibility.

Modelado multi-dominio de máquinas eléctricas. Multi-domain modeling of electric machines

El objetivo general de este proyecto es desarrollar nuevos modelos multi-dominio de máquinas eléctricas para aplicaciones al control y al diagnóstico de fallas. Se propone comenzar con el modelo electromagnético del motor de inducción en base a circuitos magnéticos equivalentes (MEC) validándolo por medio de simulación y de resultados experimentales. Como segundo paso se pretende desarrollas modelos térmicos y mecánicos con el objetivo que puedan ser acoplados al modelo electromagnético y de esta estudiar la interacción de los dominios y se validará mediante resultados de simulación y experimentales el modelo completo. Finalmente se pretende utilizar el modelo multi-dominio como una herramienta para la prueba de nuevas estrategias de control y diagnóstico de fallas. The main objective of this project is the development of new multi-domain models of electric machines for control and fault diagnosis applications. The electromagnetic modeling of the induction motor (IM) will be done using the magnetic equivalent circuits approach. This model will be validated by simulation and by experimental results. As a second step of this project, new mechanical and thermal models for the IM will be developed, with the objective of coupling these models with the electromagnetic one. With this multi-domain model it will be possible to study the interaction between each others. After that, the complete model will be validated by simulation and experimental results. Finally, the model will be used as a tool for testing new control and fault diagnosis strategies.

What is the european social model? an aproximation based on Spanish case

The public perception of the EU in Spain varies greatly. The most positive aspects of Spanish membership are associated with the consolidation of democracy, economic growth, the introduction of the euro, the growth in employment and structural and cohesion funds, the increase in the female participation rate, and the equal opportunities policies. The analysts are in favour of common objectives in the employment policy and multi-level government. The less positive aspects of the EU are the risks of losing social protection and loss of employment in some sectors due to mergers of multinationals and delocalization of companies towards Eastern Europe. The continuous demands for reform of the welfare state, the toughening of the conditions of access to social benefit and the reform of the labour market are also seen as problematic issues. Risks of competitive cuts and social dumping.

On the relation between tax rates and evasion in a multi-period economy

We extend the basic tax evasion model to a multi-period economy exhibiting sustained growth. When individuals conceal part of their true income from the tax authority, they face the risk of being audited and hence of paying the corresponding fine. Both taxes and fines determine individual saving and the rate of capital accumulation. In this context we show that the sign of the relation between the level of the tax rate and the amount of evaded income is the same as that obtained in static setups. Moreover, high tax rates on income are typically associated with low growth rates as occurs in standard growth models that disregard the tax evasion phenomenon.

Multi-product firms and product variety

The goal of this paper is to study the role of multi-product firms in the market provision of product variety. The analysis is conducted using the spokes model of non-localized competition proposed by Chen and Riordan (2007). Firstly, we show that multi-product firms are at a competitive disadvantage vis-a-vis single-product firms and can only emerge if economies of scope are sufficiently strong. Secondly, under duopoly product variety may be higher or lower with respect to both the first best and the monopolistically competitive equilibrium. However, within a relevant range of parameter values duopolists drastically restrict their product range in order to relax price competition, and as a result product variety is far below the efficient level.

Optimal progressive taxation in a model with endogenous skill supply.

This paper examines whether efficiency considerations require that optimal labour income taxation is progressive or regressive in a model with skill heterogeneity, endogenous skill acquisition and a production sector with capital-skill complementarity. We find that wage inequality driven by the resource requirements of skill-creation implies progressive labour income taxation in the steady-state as well as along the transition path from the exogenous to optimal policy steady-state. We find that these results are explained by a lower labour supply elasticity for skilled versus unskilled labour which results from the introduction of the skill acquisition technology.

Análisis de prestaciones de procesadores multi-core y multi-thread

Los procesadores multi-core y el multi-threading por hardware permiten aumentar el rendimiento de las aplicaciones. Por un lado, los procesadores multi-core combinan 2 o más procesadores en un mismo chip. Por otro lado, el multi-threading por hardware es una técnica que incrementa la utilización de los recursos del procesador. Este trabajo presenta un análisis de rendimiento de los resultados obtenidos en dos aplicaciones, multiplicación de matrices densas y transformada rápida de Fourier. Ambas aplicaciones se han ejecutado en arquitecturas multi-core que explotan el paralelismo a nivel de thread pero con un modelo de multi-threading diferente. Los resultados obtenidos muestran la importancia de entender y saber analizar el efecto del multi-core y multi-threading en el rendimiento.