Diesel spray mixing limited vaporization with non-ideal and multi-component fuel thermophysical property effects

Internal combustion engines are, and will continue to be, a primary mode of power generation for ground transportation. Challenges exist in meeting fuel consumption regulations and emission standards while upholding performance, as fuel prices rise, and resource depletion and environmental impacts are of increasing concern. Diesel engines are advantageous due to their inherent efficiency advantage over spark ignition engines; however, their NOx and soot emissions can be difficult to control and reduce due to an inherent tradeoff. Diesel combustion is spray and mixing controlled providing an intrinsic link between spray and emissions, motivating detailed, fundamental studies on spray, vaporization, mixing, and combustion characteristics under engine relevant conditions. An optical combustion vessel facility has been developed at Michigan Technological University for these studies, with detailed tests and analysis being conducted. In this combustion vessel facility a preburn procedure for thermodynamic state generation is used, and validated using chemical kinetics modeling both for the MTU vessel, and institutions comprising the Engine Combustion Network international collaborative research initiative. It is shown that minor species produced are representative of modern diesel engines running exhaust gas recirculation and do not impact the autoignition of n-heptane. Diesel spray testing of a high-pressure (2000 bar) multi-hole injector is undertaken including non-vaporizing, vaporizing, and combusting tests, with sprays characterized using Mie back scatter imaging diagnostics. Liquid phase spray parameter trends agree with literature. Fluctuations in liquid length about a quasi-steady value are quantified, along with plume to plume variations. Hypotheses are developed for their causes including fuel pressure fluctuations, nozzle cavitation, internal injector flow and geometry, chamber temperature gradients, and turbulence. These are explored using a mixing limited vaporization model with an equation of state approach for thermopyhysical properties. This model is also applied to single and multi-component surrogates. Results include the development of the combustion research facility and validated thermodynamic state generation procedure. The developed equation of state approach provides application for improving surrogate fuels, both single and multi-component, in terms of diesel spray liquid length, with knowledge of only critical fuel properties. Experimental studies are coupled with modeling incorporating improved thermodynamic non-ideal gas and fuel

Risk assessment for invasive exotic plants using multi-criteria risk models

Invasive exotic plants have altered natural ecosystems across much of North America. In the Midwest, the presence of invasive plants is increasing rapidly, causing changes in ecosystem patterns and processes. Early detection has become a key component in invasive plant management and in the detection of ecosystem change. Risk assessment through predictive modeling has been a useful resource for monitoring and assisting with treatment decisions for invasive plants. Predictive models were developed to assist with early detection of ten target invasive plants in the Great Lakes Network of the National Park Service and for garlic mustard throughout the Upper Peninsula of Michigan. These multi-criteria risk models utilize geographic information system (GIS) data to predict the areas at highest risk for three phases of invasion: introduction, establishment, and spread. An accuracy assessment of the models for the ten target plants in the Great Lakes Network showed an average overall accuracy of 86.3%. The model developed for garlic mustard in the Upper Peninsula resulted in an accuracy of 99.0%. Used as one of many resources, the risk maps created from the model outputs will assist with the detection of ecosystem change, the monitoring of plant invasions, and the management of invasive plants through prioritized control efforts.

Critical issues in managing protected areas by multi-stakeholder participation - analysis of a process in the Swiss Alps

Balancing the frequently conflicting priorities of conservation and economic development poses a challenge to management of the Swiss Alps Jungfrau-Aletsch World Heritage Site (WHS). This is a complex societal problem that calls for a knowledge-based solution. This in turn requires a transdisciplinary research framework in which problems are defined and solved cooperatively by actors from the scientific community and the life-world. In this article we re-examine studies carried out in the region of the Swiss Alps Jungfrau-Aletsch WHS, covering three key issues prevalent in transdisciplinary settings: integration of stakeholders into participatory processes; perceptions and positions; and negotiability and implementation. In the case of the Swiss Alps Jungfrau-Aletsch WHS the transdisciplinary setting created a situation of mutual learning among stakeholders from different levels and backgrounds. However, the studies showed that the benefits of such processes of mutual learning are continuously at risk of being diminished by the power play inherent in participatory approaches.

Multi-Channel-Learning (MCL)

Lerneinheiten müssen stark variierenden Anforderungen gerecht werden. Neben unterschiedlichen Lerntypen spielen vor allem auch die Umfeldbedingungen eine wesentliche Rolle, in denen Lernprozesse stattfinden. Faktoren wie z. B. die Tagesform führen letztlich dazu, dass nicht einmal für eine einzelne Person konstante Lernpräferenzen herrschen. Mit diesem Beitrag wird vorgeschlagen, zur Lösung des Problems einer Mehrkanalstrategie zu folgen. Allerdings sind spezifische Eigenschaften von Learning-Content-Systemen (LCS) notwendig, um ein sog. Multi-Channel-Learning (MCL) zu ermöglichen. Diese Eigenschaften werden im Beitrag anhand von Informationsmodellen beschrieben werden. Sie sollen als Referenzmodell dienen, das sowohl bei der Entwicklung als auch bei der Auswahl und Anpassung von LCS hilfreich sein kann. Das Referenzmodell wird deduktiv abgeleitet und anhand praktischer Anwendungen geprüft. Vorgestellt werden sowohl Anwendungs- als auch Organisationssysteme, die nach dem Modell realisiert worden sind. Auf dieser Grundlage kann schließlich eine Nutzenabschätzung des Modells für das Multi-Channel-Learnings vorgenommen werden.

Fuzzy Multi-Objective Linear Programming and Simulation Approach to the Development of Valid and Realistic Master Production Schedule

Master production schedule (MPS) plays an important role in an integrated production planning system. It converts the strategic planning defined in a production plan into the tactical operation execution. The MPS is also known as a tool for top management to control over manufacture resources and becomes input of the downstream planning levels such as material requirement planning (MRP) and capacity requirement planning (CRP). Hence, inappropriate decision on the MPS development may lead to infeasible execution, which ultimately causes poor delivery performance. One must ensure that the proposed MPS is valid and realistic for implementation before it is released to real manufacturing system. In practice, where production environment is stochastic in nature, the development of MPS is no longer simple task. The varying processing time, random event such as machine failure is just some of the underlying causes of uncertainty that may be hardly addressed at planning stage so that in the end the valid and realistic MPS is tough to be realized. The MPS creation problem becomes even more sophisticated as decision makers try to consider multi-objectives; minimizing inventory, maximizing customer satisfaction, and maximizing resource utilization. This study attempts to propose a methodology for MPS creation which is able to deal with those obstacles. This approach takes into account uncertainty and makes trade off among conflicting multi-objectives at the same time. It incorporates fuzzy multi-objective linear programming (FMOLP) and discrete event simulation (DES) for MPS development.

ICOMF: Towards a Multi-cloud Ecosystem for Dynamic Resource Composition and Scaling

Modern cloud-based applications and infrastructures may include resources and services (components) from multiple cloud providers, are heterogeneous by nature and require adjustment, composition and integration. The specific application requirements can be met with difficulty by the current static predefined cloud integration architectures and models. In this paper, we propose the Intercloud Operations and Management Framework (ICOMF) as part of the more general Intercloud Architecture Framework (ICAF) that provides a basis for building and operating a dynamically manageable multi-provider cloud ecosystem. The proposed ICOMF enables dynamic resource composition and decomposition, with a main focus on translating business models and objectives to cloud services ensembles. Our model is user-centric and focuses on the specific application execution requirements, by leveraging incubating virtualization techniques. From a cloud provider perspective, the ecosystem provides more insight into how to best customize the offerings of virtualized resources.

On the road through the Bolivian Amazon: a multi-level land governance analysis of deforestation

Previous studies have shown that collective property rights offer higher flexibility than individual property and improve sustainable community-based forest management. Our case study, carried out in the Beni department of Bolivia, does not contradict this assertion, but shows that collective rights have been granted in areas where ecological contexts and market facilities were less favourable to intensive land use. Previous experiences suggest investigating political processes in order to understand the criteria according to which access rights were distributed. Based on remote sensing and on a multi-level land governance framework, our research confirms that land placed under collective rights, compared to individual property, is less affected by deforestation among Andean settlements. However, analysis of the historical process of land distribution in the area shows that the distribution of property rights is the result of a political process based on economic, spatial, and environmental strategies that are defined by multiple stakeholders. Collective titles were established in the more remote areas and distributed to communities with lower productive potentialities. Land rights are thus a secondary factor of forest cover change which results from diverse political compromises based on population distribution, accessibility, environmental perceptions, and expected production or extraction incomes.

SLA-Driven Simulation of Multi-Tenant Scalable Cloud-Distributed Enterprise Information Systems

Cloud Computing is an enabler for delivering large-scale, distributed enterprise applications with strict requirements in terms of performance. It is often the case that such applications have complex scaling and Service Level Agreement (SLA) management requirements. In this paper we present a simulation approach for validating and comparing SLA-aware scaling policies using the CloudSim simulator, using data from an actual Distributed Enterprise Information System (dEIS). We extend CloudSim with concurrent and multi-tenant task simulation capabilities. We then show how different scaling policies can be used for simulating multiple dEIS applications. We present multiple experiments depicting the impact of VM scaling on both datacenter energy consumption and dEIS performance indicators.

Sustainable Wastewater Management: Is it Possible to Regulate Micropollution in the Future by Learning from the Past? A Policy Analysis

This paper applies a policy analysis approach to the question of how to effectively regulate micropollution in a sustainable manner. Micropollution is a complex policy problem characterized by a huge number and diversity of chemical substances, as well as various entry paths into the aquatic environment. It challenges traditional water quality management by calling for new technologies in wastewater treatment and behavioral changes in industry, agriculture and civil society. In light of such challenges, the question arises as to how to regulate such a complex phenomenon to ensure water quality is maintained in the future? What can we learn from past experiences in water quality regulation? To answer these questions, policy analysis strongly focuses on the design and choice of policy instruments and the mix of such measures. In this paper, we review instruments commonly used in past water quality regulation. We evaluate their ability to respond to the characteristics of a more recent water quality problem, i.e., micropollution, in a sustainable way. This way, we develop a new framework that integrates both the problem dimension (i.e., causes and effects of a problem) as well as the sustainability dimension (e.g., long-term, cross-sectoral and multi-level) to assess which policy instruments are best suited to regulate micropollution. We thus conclude that sustainability criteria help to identify an appropriate instrument mix of end-of-pipe and source-directed measures to reduce aquatic micropollution.

Major challenges in clinical management of TB/HIV co-infected patients in Eastern Europe compared with Western Europe and Latin America.

INTRODUCTION Rates of both TB/HIV co-infection and multi-drug-resistant (MDR) TB are increasing in Eastern Europe (EE). Data on the clinical management of TB/HIV co-infected patients are scarce. Our aim was to study the clinical characteristics of TB/HIV patients in Europe and Latin America (LA) at TB diagnosis, identify factors associated with MDR-TB and assess the activity of initial TB treatment regimens given the results of drug-susceptibility tests (DST). MATERIAL AND METHODS We enrolled 1413 TB/HIV patients from 62 clinics in 19 countries in EE, Western Europe (WE), Southern Europe (SE) and LA from January 2011 to December 2013. Among patients who completed DST within the first month of TB therapy, we linked initial TB treatment regimens to the DST results and calculated the distribution of patients receiving 0, 1, 2, 3 and ≥4 active drugs in each region. Risk factors for MDR-TB were identified in logistic regression models. RESULTS Significant differences were observed between EE (n=844), WE (n=152), SE (n=164) and LA (n=253) for use of combination antiretroviral therapy (cART) at TB diagnosis (17%, 40%, 44% and 35%, p<0.0001), a definite TB diagnosis (culture and/or PCR positive for Mycobacterium tuberculosis; 47%, 71%, 72% and 40%, p<0.0001) and MDR-TB prevalence (34%, 3%, 3% and 11%, p <0.0001 among those with DST results). The history of injecting drug use [adjusted OR (aOR) = 2.03, (95% CI 1.00-4.09)], prior TB treatment (aOR = 3.42, 95% CI 1.88-6.22) and living in EE (aOR = 7.19, 95% CI 3.28-15.78) were associated with MDR-TB. For 569 patients with available DST, the initial TB treatment contained ≥3 active drugs in 64% of patients in EE compared with 90-94% of patients in other regions (Figure 1a). Had the patients received initial therapy with standard therapy [Rifampicin, Isoniazid, Pyrazinamide, Ethambutol (RHZE)], the corresponding proportions would have been 64% vs. 86-97%, respectively (Figure 1b). CONCLUSIONS In EE, TB/HIV patients had poorer exposure to cART, less often a definitive TB diagnosis and more often MDR-TB compared to other parts of Europe and LA. Initial TB therapy in EE was sub-optimal, with less than two-thirds of patients receiving at least three active drugs, and improved compliance with standard RHZE treatment does not seem to be the solution. Improved management of TB/HIV patients requires routine use of DST, initial TB therapy according to prevailing resistance patterns and more widespread use of cART.