Weed-soybean interference studies in Brazil

Recently, a notable shift in weed patterns has occurred in some soybean growing regions, as a result of tillage system change and herbicide use. The weed communities are very diversified and strongly interfere with soybean growth and productivity, especially when the shading of superior leaves of the canopy occurs. Some changes to certain agricultural practices, such as cultivars, row spacing and sowing density, were studied and were considered suitable for the establishment of an integrated weed management system under Brazilian conditions. -from Author

Interference competition between ants (Hymenoptera: Formicidae) in Amazonian clearings

The first case of interference competition through soil dumping in South America is documented between Ectatomma quadridens and Pheidole fallax in Amazonian forest clearings. Workers of the diurnally active E. quadridens arrive at nests of P. fallax at dawn, and begin to fill up nest entrances with soil. During the day, E. quadridens workers remain stationary on the closed nest of P. fallax, and fill soil at the first signs of nest openings. Colonies of P. fallax distant from E. quadridens nests are active for 24 hrs; those near E. quadridens nests are limited for foraging nocturnally after opening nest entrances. This pattern was not found between heterospecific colonies at greater distances from the camp midden, according with the prediction that interference competition is more probable as resources become more concentrated. Colonies of P. fallax near E. quadridens nests located near the camp midden had a net forage intake of 60% of those located in areas without E. quadridens. -Author

Interference of the blood clot on granulation tissue formation after tooth extraction. Histomorphological study in rats.

The interference of a blood clot in the first postoperative hours of dental extraction wounds was studied in rats. Sixty male albino rats were divided into two groups: Group I, immediately after extraction of right maxillary incisor the gingival mucosa was approximated and sutured; Group II, after 6 to 8 minutes postoperatively the blood clot was removed with saline irrigation and absorbent paper cones. The mucosa was then approximated and sutured. Six animals in each group were sacrificed after 12 hours, 1, 4, 7 and 10 days. There was a profound delay in healing in Group II since, although a new blood clot was later formed, it was not organized. The quality and the constitution, maintenance and retraction of the clot are the regulating factors in connective tissue formation during alveolar healing.

A recursive approach to space resection using straight lines

An approach using straight lines as features to solve the photogrammetric space resection problem is presented. An explicit mathematical model relating straight lines, in both object and image space, is used. Based on this model, Kalman Filtering is applied to solve the space resection problem. The recursive property of the filter is used in an iterative process which uses the sequentially estimated camera location parameters to feedback to the feature extraction process in the image. This feedback process leads to a gradual reduction of the image space for feature searching, and consequently eliminates the bottleneck due to the high computational cost of the image segmentation phase. It also enables feature extraction and the determination of feature correspondence in image and object space in an automatic way, i.e., without operator interference. Results obtained from simulated and real data show that highly accurate space resection parameters are obtained as well as a progressive processing time reduction. The obtained accuracy, the automatic correspondence process, and the short related processing time show that the proposed approach can be used in many real-time machine vision systems, making possible the implementation of applications not feasible until now.

Interference competition and scavenging by Crematogaster ants (Hymenoptera: Formicidae) associated with the webs of the social spider Anelosimus eximius (Araneae: Theridiidae) in the central Amazon

Crematogaster cf. victima is a common inhabitant in the sheet web nests of the social spider Anelosimus eximius in the central Amazon basin near Manaus. A number of other ant species were found foraging on the non-sticky webs of A. eximius, but none of these reached the web occupation frequency found in C. cf. victima, nor, with the exception of an unidentified species of Pheidole, did they form satellite nests in the web, as did this species. Many prey which escaped the knock-down threads of the sheet web of A. eximius colonies were captured by ants in the lower web portions which they dominated. Furthermore, prey which were rejected by A. eximius, especially large, heavily sclerotized beetles, were also consumed by this ant. Repeated observations and experiments suggest that C. cf. victima is able to deter A. eximius activity through aerial venom release. Resources lost by A. eximius colonies to ants, especially C. cf. victima, in colonial web area and prey, may pose significant costs and may reduce colony growth.

Batch and filter approaches to spacecraft sensor alignment estimation

Two Kalman-filter formulations are presented for the estimation of spacecraft sensor misalignments from inflight data. In the first the sensor misalignments are part of the filter state variable; in the second the state vector contains only dynamical variables, but the sensitivities of the filter innovations to the misalignments are calculated within the Kalman filter. This procedure permits the misalignments to be estimated in batch mode as well as a much smaller dimension for the Kalman filter state vector. This results not only in a significantly smaller computational burden but also in a smaller sensitivity of the misalignment estimates to outliers in the data. Numerical simulations of the filter performance are presented.

Interference phenomenon for the Faddeevian regularization of 2D chiral fermionic determinants

The classification of the regularization ambiguity of a 2D fermionic determinant in three different classes according to the number of second-class constraints, including the new Faddeevian regularization, is examined and extended. We find a new and important result that the Faddeevian class, with three second-class constraints, possesses a free continuous one parameter family of elements. The criterion of unitarity restricts the parameter to the same range found earlier by Jackiw and Rajaraman for the two-constraint class. We studied the restriction imposed by the interference of right-left modes of the chiral Schwinger model (χQED2) using Stone's soldering formalism. The interference effects between right and left movers, producing the massive vectorial photon, are shown to constrain the regularization parameter to belong to the four-constraint class which is the only nonambiguous class with a unique regularization parameter. ©1999 The American Physical Society.

Interference phenomena, chiral bosons, and Lorentz invariance

We have studied the theory of gauged chiral bosons and proposed a general theory, a master action, that encompasses different kinds of gauge field couplings in chiral bosonized theories with first-class chiral constraints. We have fused opposite chiral aspects of this master action using the soldering formalism and applied the final action to several well-known models. The Lorentz rotation permitted us to fix conditions on the parameters of this general theory in order to preserve the relativistic invariance. We also have established some conditions on the arbitrary parameter concerned in a chiral Schwinger model with a generalized constraint, investigating both covariance and Lorentz invariance. The results obtained supplement the one that shows the soldering formalism as a new method of mass generation. ©2001 The American Physical Society.

Reciprocal interference between ants and stingless bees attending the honeydew-producing homopteran Aetalion reticulatum (Homoptera: Aetalionidae)

We evaluated the reciprocal effects between foragers of the ants Camponotus crassus and of the stingless bees Trigona hyalinata on aggregations of the honeydew-producing treehopper Aetalion reticulatum. The interactions were observed in Bauhinia variegata (Caesalpiniaceae) and Mangifera indica (Anacardiaceae) trees. We recorded the presence/absence of each attendant species in homopteran aggregations to test if the observed co-occurrence is lower than that expected by chance. An exclusion experiment was performed in which each attendant species was excluded from aggregations in order to test if an attendant species is more likely to occupy aggregations where the other attendant is not present. We also recorded the number of individuals of each attendant species in homopteran aggregations to search for any correlation between homopteran and attendant abundances. Additionally, we performed experiments using termites (Termitidae, Isoptera) as models to verify if the attendant species have the potential to defend A. reticulatum against natural enemies. The co-occurrence of attendant species was lower than that expected by chance. Homopteran aggregations without stingless bees were more visited by ants than those in which T. hyalinata was present, and vice-versa. The abundance of stingless bees was proportional to homopteran abundance, while ants abundance was not correlated to homopteran abundance. Both attendant species attacked the natural enemies models when we glued the termites ca. 1 cm away from homopteran aggregations, but only ants removed termites glued 5-7 cm away from aggregations. We suggest that the effects of non-formicid attendants should be included as another factor influencing the costs and benefits of ant-homopteran interactions, since honeydew availability for ants also depends on the presence and behavior of interspecific attendants.

An Improved Design Procedure for LCC Resonant Filter of Dimmable Electronic Ballasts for Fluorescent Lamps, Based on Lamp Model

This paper presents an improved design methodology for determining the parameters used in the classical Series-Parallel Loaded Resonant (SPLR) filter employed in the switching frequency controlled dimmable electronic ballasts. According to the analysis developed in this paper, it is possible to evaluate some characteristics of the resonant filter during the dimming process, such as: range of switching frequency, phase shift and rms value of the current drained by the resonant filter + fluorescent lamp set.

Interference of epicuticular wax from leaves of grasses in selection and preparation of substrate for cultivation of symbiont fungus by Atta capiguara (Hym. Formicidae)

The selection of plants is one of the stages of foraging behavior, executed by leaf-cutting ants for the cultivation of symbiont fungus. Anatomical, biochemical and physiological characteristics of vegetal species are some of the factors that influence selection of substrate; however, most studies described in the literature refer to leaf-cutting ants. Due to the scarcity of studies on the role of epicuticular waxes of grasses in relation to foraging behavior of monocotyledonous leaf-cutters, we completed three experiments with the ant species Atta capiguara in which we analyzed: the attractiveness or selectivity of leaves of Saccharum officinarum (sugarcane) and/or Hypharrenia rufa (capim jaraguá), with and without epicuticular wax in relation to the worker of this ant species, their processing and elimination in the form of pellets of epicuticular wax from the referred fragments removed by the workers for cultivation of symbiont fungus. We observed that vegetal fragments without wax were those most transported by workers to the inside of the nests; that they processed the fragments equally with as much as without wax, and eliminated, in the form of pellets, wax removed from the same into garbage chambers of the colonies, leading us to conclude that for monocotyledonous leaf-cutters, epicuticular wax from vegetal leaves has great importance in vegetal integrity by being used as substrate, representing a physical barrier to the growth of symbiont fungus.

An improved design procedure for LCC resonant filter of dimmable electronic ballasts for fluorescent lamps, based on lamp model

This paper presents an improved design methodology for the determination of the parameters used in the classical series-resonant parallel-loaded (SRPL) filter employed in the switching frequency controlled dimmable electronic ballasts. According to the analysis developed in this paper, it is possible to evaluate some important characteristics of the resonant filter during the dimming operation, such as: range of switching frequency, phase shift, and rms value of the current drained by the resonant filter + fluorescent lamp set. Experimental results are presented in order to validate the analyses developed in this paper. © 2005 IEEE.

Background interference on the color of dental composite materials with different thickness by digital contrast

In this work the color dependence of resin composites with the background color was evaluated. The objective was to measure since what thickness the color of the sample stops being influenced by the color of the background over which the resin is placed and the methodology used in experiment was based in analyzing the contrast of digital images of the sample over a black background. The results shown that since 0.8 mm the images contrast becomes almost constant; it prove that since this thickness the color of resin composite depends on the optical resin properties only. The experiment was repeated under three conditions of luminosity to evaluate the influence of it on the image contrast and the results obtained were identical.

Comparative analysis of synchronization algorithms based on PLL, RDFT and Kalman Filter

This paper discusses the main characteristics and presents a comparative analysis of three synchronization algorithms based respectively, on a Phase-Locked Loop, a Kalman Filter and a Discrete Fourier Transform. It will be described the single and three-phase models of the first two methods and the single-phase model of the third one. Details on how to modify the filtering properties or dynamic response of each algorithm will be discussed in terms of their design parameters. In order to compare the different algorithms, these parameters will be set for maximum filter capability. Then, the dynamic response, during input amplitude and frequency deviations will be observed, as well as during the initialization procedure. So, advantages and disadvantages of all considered algorithms will be discussed. ©2007 IEEE.