(Table 1) Crystal sizes of measured samples from the Bush Hill region in the Gulf of Mexico and from ODP Leg 204 at the Hydrate Ridge offshore Oregon

The grain sizes of gas hydrate crystallites are largely unknown in natural samples. Single grains are hardly detectable with electron or optical microscopy. For the first time, we have used high-energy synchrotron diffraction to determine grain sizes of six natural gas hydrates retrieved from the Bush Hill region in the Gulf of Mexico and from ODP Leg 204 at the Hydrate Ridge offshore Oregon from varying depth between 1 and 101 metres below seafloor. High-energy synchrotron radiation provides high photon fluxes as well as high penetration depth and thus allows for investigation of bulk sediment samples. Gas hydrate grain sizes were measured at the Beam Line BW 5 at the HASYLAB/Hamburg. A 'moving area detector method', originally developed for material science applications, was used to obtain both spatial and orientation information about gas hydrate grains within the sample. The gas hydrate crystal sizes appeared to be (log-)normally distributed in the natural samples. All mean grain sizes lay in the range from 300 to 600 µm with a tendency for bigger grains to occur in greater depth. Laboratory-produced methane hydrate, aged for 3 weeks, showed half a log-normal curve with a mean grain size value of c. 40 µm. The grains appeared to be globular shaped.

Early Cretaceous planktonic foraminifera from the Tethys

Early Cretaceous planktonic foraminiferal assemblages include rare planispiral and pseudoplanispiral morphotypes with elongate chambers that BouDagher-Fadel et al. assigned to Schackoina or accommodated in the new genus Claviblowiella. New findings of well-preserved planktonic foraminiferal faunas from the Lesches en Diois (SE France) section, the Cismon core (NE Italy), the Calabianca (NW Sicily) section and the Upper Aptian of Deep Sea Drilling Project (DSDP) Site 545 drilled off Morocco, have allowed a better understanding of the morphological features of these rare, unevenly distributed taxa. Our data demonstrate that each small planispiral species with globular chambers has a corresponding "clavate" morphotype which (as the "normal" forms) exhibits a smooth, finely perforate wall. Consequently, the latter have been assigned here to the genus Globigerinelloides and treated as subspecies of the "non-clavate" taxa. The (clavate) subspecies belonging to the genus Globigerinelloides here retained are G. duboisi sigali Longoria, G. maridalensis elongatus subsp. nov., G. blowi lobatus subsp. nov. and G. paragottisi clavatus subsp. nov., while Globigerinelloides minai Obregòn de la Parra is not retained. In addition, a new genus, Pseudoschackoina, type species Planomalina saundersi Bolli (senior synonym of Hastigerinoides cepedai Obregòn de la Parra, has been formalised for individuals possessing elongate, pointed, laterally compressed chambers, bearing tubulospines arranged on a pseudoplanispiral (dysaxial) coiling mode. Stratigraphically, in the sections studied the first taxon to appear is Pseudoschackoina saundersi, in the uppermost part of the Selli Level (=OAE1a), immediately followed, just above the OAE1a, by all the "clavate" globigerinelloidids. Regarding the last occurrences, Pseudoschackoina saundersi and G. maridalensis elongatus disappear in the lower part of the Globigerinelloides algerianus Zone, Globigerinelloides paragottisi clavatus at the top of the same zone, while Globigerinelloides blowi lobatus and G. duboisi sigali range up to the lower part of the Ticinella bejaouaensis Zone.

Cladoceran functional assemblages and functional diversity indices from Mallusjärvi and Tiiläänjärvi (southern Finland) sediment cores

will be submitted by the author

Galaxy threshing and the origin of ultra-compact dwarf galaxies in the Fornax cluster

A recent all-object spectroscopic survey centred on the Fornax cluster of galaxies has discovered a population of subluminous and extremely compact members, called 'ultra-compact dwarf' (UCD) galaxies. In order to clarify the origin of these objects, we have used self-consistent numerical simulations to study the dynamical evolution a nucleated dwarf galaxy would undergo if orbiting the centre of the Fornax cluster and suffering from its strong tidal gravitational field. We find that the outer stellar components of a nucleated dwarf are removed by the strong tidal field of the cluster, whereas the nucleus manages to survive as a result of its initially compact nature. The developed naked nucleus is found to have physical properties (e. g. size and mass) similar to those observed for UCDs. We also find that although this formation process does not have a strong dependence on the initial total luminosity of the nucleated dwarf, it does depend on the radial density profile of the dark halo in the sense that UCDs are less likely to be formed from dwarfs embedded in dark matter haloes with central 'cuspy' density profiles. Our simulations also suggest that very massive and compact stellar systems can be rapidly and efficiently formed in the central regions of dwarfs through the merging of smaller star clusters. We provide some theoretical predictions on the total number and radial number density profile of UCDs in a cluster and their dependencies on cluster masses.

The surface brightness and colour-magnitude relations for Fornax cluster galaxies

We present BVI photometry of 190 galaxies in the central 4 x 3 deg(2) region of the Fornax cluster observed with the Michigan Curtis Schmidt Telescope. Results from the Fornax Cluster Spectroscopic Survey (FCSS) and the Flair-II Fornax Surveys have been used to confirm the membership status of galaxies in the Fornax Cluster Catalogue (FCC). In our catalogue of 213 member galaxies, 92 (43 per cent) have confirmed radial velocities. In this paper, we investigate the surface brightness-magnitude relation for Fornax cluster galaxies. Particular attention is given to the sample of cluster dwarfs and the newly discovered ultracompact dwarf galaxies (UCDs) from the FCSS. We examine the reliability of the surface brightness-magnitude relation as a method for determining cluster membership and find that at surface brightnesses fainter than 22 mag arcsec(-2), it fails in its ability to distinguish between cluster members and barely resolved background galaxies. Cluster members exhibit a strong surface brightness-magnitude relation. Both elliptical (E) galaxies and dwarf elliptical (dE) galaxies increase in surface brightness as luminosity decreases. The UCDs lie off the locus of the relation. B-V and V-I colours are determined for a sample of 113 cluster galaxies and the colour-magnitude relation is explored for each morphological type. The UCDs lie off the locus of the colour-magnitude relation. Their mean V - I colours (similar to1.09) are similar to those of globular clusters associated with NGC 1399. The location of the UCDs on both surface brightness and colour-magnitude plots supports the 'galaxy threshing' model for infalling nucleated dwarf elliptical (dE, N) galaxies.

Galaxy threshing and ultra-compact dwarfs in the Fornax cluster

We have discovered a new type of galaxy in the Fornax Cluster: 'ultra-compact' dwarfs (UCDs). The UCDs are unresolved in ground-based imaging and have spectra typical of old stellar systems. Although the UCDs resemble overgrown globular clusters, based on VLT UVES echelle spectroscopy, they appear to be dynamically distinct systems with higher internal velocity dispersions and M/L ratios for a given luminosity than Milky Way or M31 globulars. Our preferred explanation for their origin is that they are the remnant nuclei of dwarf elliptical galaxies which have been tidally stripped, or 'threshed' by repeated encounters with the central cluster galaxy, NGC1399. If correct, then tidal stripping of nucleated dwarfs to form UCDs may, over a Hubble time, be an important source of the plentiful globular cluster population in the halo of NGC1399, and, by implication, other cD galaxies. In this picture, the dwarf elliptical halo contents, up to 99% of the original dwarf luminosity, contribute a significant fraction of the populations of intergalactic stars, globulars, and gas in galaxy clusters.

Microcin J25 has a threaded sidechain-to-backbone ring structure and not a head-to-tail cyclized backbone

Microcin J25 is a 21 amino acid bacterial peptide that has potent antibacterial activity against Gram-negative bacteria, resulting from its interaction with RNA polymerase. The peptide was previously proposed to have a head-to-tail cyclized peptide backbone and a tight globular structure (Blond, A., Peduzzi, J., Goulard, C., Chiuchiolo, M. J., Barthelemy, M., Prigent, Y., Salomon, R. A., Farias, R. N., Moreno, F. & Rebuffat, S. Eur. J. Biochem. 1999, 259, 747-755). It exhibits remarkable thermal stability for a peptide of its size lacking disulfide bonds and in part this was previously proposed to derive from its macrocyclic structure. We show here that in fact the peptide does not have a head-to-tail cyclic structure but rather a side chain to backbone cyclization between Glu8 and the N-terminus. This creates an embedded ring that is threaded by the C-terminal tail of the molecule, forming a noose-like feature. The three-dimensional structure deduced from NMR data suggests that slippage of the noose is prevented by two aromatic residues flanking the embedded ring. Unthreading does not occur even when the molecule is enzymatically digested with thermolysin. The new structural interpretation fully accounts for previously reported NMR and biophysical data and is consistent with the remarkable stability of this potent antimicrobial peptide.

Semisolid microstructural evolution of AlSi7Mg alloy during partial remelting

Different as-cast microstructures of an AlSi7Mg alloy were produced by controlling the solidification conditions. The as-cast grain size ranged from 1.4 mm to 160 mum and the morphology varied from dendritic to rosette-like to globular. The as-cast materials were then partially remelted and isothermally held at 580degreesC for microstructure evolution. The final microstructure depended on the initial as-cast microstructure and the isothermal holding time. After partial remelting and isothermal holding, coarse-grained dendritic structures were not able to evolve to a globular structure, while structures with medium sized dendritic grains evolved to a globular structure with a relatively large particle size after a long isothermal holding time. Fine-grained structures evolved to well-rounded globular grains within times ranging front 10 min to 5 min as the dendritic nature of the starting structure diminished. An empirical equation has been established to describe the relationship between the evolved microstructure and the as-cast microstructure. (C) 2003 Elsevier B.V. All rights reserved.

Cluster cannibalism and scaling relations of galactic stellar nuclei

Recently, very massive compact stellar systems have been discovered in the intracluster regions of galaxy clusters and in the nuclear regions of late-type disk galaxies. It is unclear how these compact stellar systems - known as ultracompact dwarf (UCD) galaxies or nuclear clusters (NCs) - form and evolve. By adopting a formation scenario in which these stellar systems are the product of multiple merging of star clusters in the central regions of galaxies, we investigate, numerically, their physical properties. We find that physical correlations among velocity dispersion, luminosity, effective radius, and average surface brightness in the stellar merger remnants are quite different from those observed in globular clusters. We also find that the remnants have triaxial shapes with or without figure rotation, and these shapes and their kinematics depend strongly on the initial number and distribution of the progenitor clusters. These specific predictions can be compared with the corresponding results of ongoing and future observations of UCDs and NCs, thereby providing a better understanding of the origin of these enigmatic objects.

Ultra-compact dwarf galaxies in galaxy clusters

We review the evidence that the ultra-compact dwarf (UCD) galaxies we recently discovered in the Fornax Cluster form a new, previously unknown class of galaxies and we discuss possible scenarios for their formation. We then present recent results that UCDs are also present in the Virgo Cluster, and that there is a much larger than expected population of fainter UCDs in the Fornax Cluster. The size and properties of this population may lead us to revise our original 'galaxy threshing' hypothesis for the formation of UCDs.

Crystal structures of the DsbG disulfide isomerase reveal an unstable disulfide

Dsb proteins control the formation and rearrangement of disulfide bonds during the folding of secreted and membrane proteins in bacteria. DsbG, a member of this family, has disulfide bond isomerase and chaperone activity. Here, we present two crystal structures of DsbG at 1.7- and 2.0-Angstrom resolution that are meant to represent the reduced and oxidized forms, respectively. The oxidized structure, however, reveals a mixture of both redox forms, suggesting that oxidized DsbG is less stable than the reduced form. This trait would contribute to DsbG isomerase activity, which requires that the active-site Cys residues are kept reduced, regardless of the highly oxidative environment of the periplasm. We propose that a Thr residue that is conserved in the cis-Pro loop of DsbG and DsbC but not found in other Dsb proteins could play a role in this process. Also, the structure of DsbG reveals an unanticipated and surprising feature that may help define its specific role in oxidative protein folding. Thus, the dimensions and surface features of DsbG show a very large and charged binding surface that is consistent with interaction with globular protein substrates having charged surfaces. This finding suggests that, rather than catalyzing disulfide rearrangement in unfolded substrates, DsbG may preferentially act later in the folding process to catalyze disulfide rearrangement in folded or partially folded proteins.

Revision of Telotrema Ozaki, 1933 (Digenea : Gyliauchenidae Fukui, 1929), including the description of a new species from an acanthurid fish from the Great Barrier Reef, Queensland, Australia

We describe one new species of Telotrema Ozaki, 1933 from the intestine of an acanthurid fish of the Great Barrier Reef. Telotrema brevicaudatum n. sp. is described from 2 mature specimens from the yellowfin surgeonfish, Acanthurus xanthopterus Valenciennes, 1835 ( Acanthuridae), from waters off Lizard Island, Queensland, Australia. This species is distinguished from the type-species, Telotrema caudatum Ozaki, 1933, by the smaller excretory papilla, the massive pars prostatica, the unipartite, globular seminal vesicle, and the intertesticular position of the ovary. The proposal of a new species of Telotrema necessitates re-examination of the generic diagnosis, and the genus is here redefined in light of the morphology of T. brevicaudatum. Telotrema is distinguished from Gyliauchen Nicoll, 1915 by the possession of a ventral sucker which is larger than the pharynx, a straight or sigmoid oesophagus, an extensive and dense vitellarium, and a distinct excretory papilla. We here recognise 3 species and distinguish them in a key. The biogeographical range for species of Telotrema now includes acanthurid and pomacentrid fishes of the western Pacific Ocean.

In vitro bioactivity of MOEP grafted ePTFE membranes for craniofacial applications

The bioactivity of three methacryloyloxyethyl phosphate (MOEP) grafted expanded polytetrafluoroethylene (ePTFE) membranes with varying surface coverage as well as unmodified ePTFE was investigated through a series of in vitro tests: calcium phosphate (CaP) growth in simulated body fluid (SBF), serum protein adsorption, and a morphology and attachment study of human osteoblast-like SaOS-2 cells. The graft copolymers were prepared by means of gamma irradiation induced grafting and displayed various surface morphologies and wettabilities depending on the grafting conditions used. Unmodified ePTFE did not induce nucleation of Cal? minerals, whereas all the grafted membranes revealed the growth of Cal? minerals after 7 days immersion in SBF. The sample with lowest surface grafting yield (24% coverage), a smooth graft morphology and relatively high hydrophobicity (theta(adv) = 120 degrees, theta(rec) = 80 degrees) showed carbonated hydroxyapatite growth covering the surface. On the other hand, the samples with high surface grafting yield (76% and 100%), a globular graft morphology and hydrophilic surfaces (theta(adv) = 60 degrees and 80 degrees, theta(rec) = 25 degrees and 15 degrees, respectively) exhibited irregular growth of non-apatitic Cap minerals. Irreversibly adsorbed protein measured after a 1 h immersion in serum solution was quantified by the amount of nitrogen on the surface using XPS, as well as by weight increase. All grafted membranes adsorbed 3-6 times more protein than the unmodified membrane. The sample with the highest surface coverage adsorbed the most protein. Osteoblast-like SaOS-2 cells cultured for 3 h revealed significantly higher levels of cell attachment on all grafted membranes compared to unmodified ePTFE. Although the morphology of the cells was heterogeneous, in general, the higher grafted surfaces showed a much better cell morphology than both the low surface-grafted and the control unmodified sample. The suite of in vitro tests confirms that a judicious choice of grafted monomer such as the phosphate-containing methacrylate monomer (MOEP) significantly improves the bioactivity of ePTFE in vitro. (c) 2005 Elsevier Ltd. All rights reserved.