Iatrogenic bile duct injury: The scourge of laparoscopic cholecystectomy

Background: Laparoscopic cholecystectomy (LC) has become the first-line surgical treatment of calculous gall-bladder disease and the benefits over open cholecystectomy are well known. In the early years of LC, the higher rate of bile duct injuries compared with open cholecystectomy was believed to be due to the 'learning curve' and would dissipate with increased experience. The purpose of the present paper was to review a tertiary referral unit's experience of bile duct injuries induced by LC. Methods: A retrospective analysis was performed on all patients referred for management of an iatrogenic bile duct injury from 1981 to 2000. For injuries sustained at LC, details of time between LC and recognition of the injury, time from injury to definitive repair, type of injury, use of intraoperative cholangiography (IOC), definitive repair and postoperative outcome were recorded. The type of injury sustained at open cholecystectomy was similarly classified to allow the severity of injury to be compared. Results: There were 131 patients referred for management of an iatrogenic bile duct injury that occurred at open cholecystectomy (n = 62), liver resection (n = 5) and at LC (n = 64). Only 39% of bile duct injuries were recognized at the time of LC. Following conversion to open operation, half the subsequent procedures were considered inappropriate. When the injury was not recognized during LC, 70% of patients developed bile leak/peritonitis, almost half of whom were referred, whereas the rest underwent a variety of operative procedures by the referring surgeon. The remainder developed jaundice or abnormal liver function tests and cholangitis. An IOC was performed in 43% of cases, but failed to identify an injury in two-thirds of patients. The bile duct injuries that occurred at LC were of greater severity than with open cholecystectomy. Following definitive repair, there was one death (1.6%). Ninety-two per cent of patients had an uncomplicated recovery and there was one late stricture requiring surgical revision. Conclusions: The early prediction that the rate of injury during LC would decline substantially with increased experience has not been fulfilled. Bile duct injury that occurs at LC is of greater severity than with open cholecystectomy. Bile duct injury is recognized during LC in less than half the cases. Evidence is accruing that the use of cholangiography reduces the risk and severity of injury and, when correctly interpreted, increases the chance of recognition of bile duct injury during the procedure. Prevention is the key but, should an injury occur, referral to a specialist in biliary reconstructive surgery is indicated.

Early reoperation for acute dysphagia following laparoscopic fundoplication

Background: A small number of patients develop acute severe dysphagia for which reoperation is necessary within 10 days of laparoscopic fundoplication. The aim of this study was to identify clinical variables that might predict the likelihood of this condition occurring, such that it could be avoided in the future. Methods: This was a prospective cohort study from three tertiary referral centres, using reoperation for acute dysphagia as the main outcome variable. Gastrointestinal symptom rating scale, and psychological well-being index questionnaires were undertaken before laparoscopic fundoplication, and dysphagia scores were determined before operation and 1 year later. Standard preoperative assessment included gastroscopy, oesophageal manometry and pH studies. Results: Twelve (1.9 per cent) of the 617 patients suffered acute dysphagia, which was predicted by older age and female sex, and resulted in a longer duration of hospital stay. This condition was not predicted by any other demographic, clinical, investigative or operative variables. Conclusions: The study did not identify useful criteria by which severe acute dysphagia could be anticipated and thereby avoided following laparoscopic fundoplication.

Estimation of total body water from bioelectrical impedance analysis in patients with pancreatic cancer - agreement between three methods of prediction

Introduction Bioelectrical impedance analysis (BIA) is a useful field measure to estimate total body water (TBW). No prediction formulae have been developed or validated against a reference method in patients with pancreatic cancer. The aim of this study was to assess the agreement between three prediction equations for the estimation of TBW in cachectic patients with pancreatic cancer. Methods Resistance was measured at frequencies of 50 and 200 kHz in 18 outpatients (10 males and eight females, age 70.2 +/- 11.8 years) with pancreatic cancer from two tertiary Australian hospitals. Three published prediction formulae were used to calculate TBW - TBWs developed in surgical patients, TBWca-uw and TBWca-nw developed in underweight and normal weight patients with end-stage cancer. Results There was no significant difference in the TBW estimated by the three prediction equations - TBWs 32.9 +/- 8.3 L, TBWca-nw 36.3 +/- 7.4 L, TBWca-uw 34.6 +/- 7.6 L. At a population level, there is agreement between prediction of TBW in patients with pancreatic cancer estimated from the three equations. The best combination of low bias and narrow limits of agreement was observed when TBW was estimated from the equation developed in the underweight cancer patients relative to the normal weight cancer patients. When no established BIA prediction equation exists, practitioners should utilize an equation developed in a population with similar critical characteristics such as diagnosis, weight loss, body mass index and/or age. Conclusions Further research is required to determine the accuracy of the BIA prediction technique against a reference method in patients with pancreatic cancer.

Engineering closure of an open pit gold operation in a semi-arid climate

Along with material characteristics and geometry, the climate in which a mine is located can have a dramatic effect on the appropriate options for rehabilitation. The paper outlines the setting, mining, milling and waste disposal at Kidston Gold Mine's open pit operations in the semi-arid climate of North Queensland, Australia, before focusing on the engineering aspects of the rehabilitation of Kidston. The mine took a holistic and proactive approach to rehabilitation, and was prepared to demonstrate a number of innovative approaches, which are described in the paper. Engineering issues that had to be addressed included the geotechnical stability and deformation of waste rock dumps, including a 240 m high in-pit dump: the construction and performance monitoring of a “store and release” cover over potentially acid forming mineralised waste rock; erosion from the side slopes of the waste rock dumps; the in-pit co-disposal of waste rock and thickened tailings; the geotechnical stability of the tailings dam wall; the potential for erosion of bare tailings; the water balance of the tailings dam; direct revegetation of the tailings; and the pit hydrology. The rehabilitation of the mine represents an important benchmark in mine site rehabilitation best practice, from which lessons applicable worldwide can be shared.

Control of Aedes vectors of dengue in three provinces of Vietnam by use of Mesocyclops (Copepoda) and community-based methods validated by entomologic, clinical, and serological surveillance

We describe remarkable success in controlling dengue vectors, Aedes aegypti (L.) and Aedes albopictus (Skuse), in 6 communes with 11,675 households and 49,647 people in the northern provinces of Haiphong, Hung Yen, and Nam Dinh in Vietnam. The communes were selected for high-frequency use of large outdoor concrete tanks and wells. These were found to be the source of 49.6-98.4% of Ae. aegypti larvae, which were amenable to treatment with local Mesocyclops, mainly M. woutersi Van der Velde, M. aspericornis (Daday) and M. thermocyclopoides Harada. Knowledge, attitude, and practice surveys were performed to determine whether the communities viewed dengue and dengue hemorrhagic fever as a serious health threat; to determine their knowledge of the etiology, attitudes, and practices regarding control methods including Mesocyclops; and to determine their receptivity to various information methods. On the basis of the knowledge, attitude, and practice data, the community-based dengue control program comprised a system of local leaders, health volunteer teachers, and schoolchildren, supported by health professionals. Recycling of discards for economic gain was enhanced, where appropriate, and this, plus 37 clean-up campaigns, removed small containers unsuitable for Mesocyclops treatment. A previously successful eradication at Phan Boi village (Hung Yen province) was extended to 7 other villages forming Di Su commune (1,750 households) in the current study. Complete control was also achieved in Nghia Hiep (Hung Yen province) and in Xuan Phong (Nam Dinh province); control efficacy was greater than or equal to 99.7% in the other 3 communes (Lac Vien in Haiphong, Nghia Dong, and Xuan Kien in Nam Dinh). Although tanks and wells were the key container types of Ae. aegypti productivity, discarded materials were the source of 51% of the standing crop of Ae. albopictus. Aedes albopictus larvae were eliminated from the 3 Nam Dinh communes, and 86-98% control was achieved in the other 3 communes. Variable dengue attack rates made the clinical and serological comparison of control and untreated communes problematic, but these data indicate that clinical surveillance by itself is inadequate to monitor dengue transmission.

Surgical programme at Royal Alexandra Hospital, Sydney, for Papua New Guinea children with congenital heart disease, 1978-1994

Objective : To report the history of the Royal Alexandra Hospital for Children (RAHC) Papua New Guinea (PNG) cardiac surgical programme and describe the selection, preoperative clinical features and postoperative outcome of children with congenital heart disease managed by the programme. Methods : Details for each of the PNG cardiac patients admitted to RAHC following selection by visiting cardiologists between 1978 and 1994 were entered into a database, and analysed and interpreted. Results : A congenital heart defect was confirmed in 165 of the 170 children selected. The male to female ratio was 1:1 and the mean age on admission to RAHC was 5.5 years. Almost all of the children for whom data were available (98%) had a weight for age and 41% had a height for age less than the 3rd centile. One-sixth had delayed milestones. A large number were tachypnoeic, in heart failure, or had pulmonary hypertension on admission. Ventricular septal defect and tetralogy of Fallot were the commonest defects, and lesions such as aortic stenosis, coarctation of the aorta and transposition of the great arteries were absent or rare. Thirty-one (19%) of the children selected initially did not receive surgery because of pulmonary hypertension, or because the lesions did not fall within the programme guidelines for operation. One hundred and twenty-nine children had corrective and four had palliative procedures. Half of the operated children had postoperative complications. Eight children died, all following open-heart procedures, giving a case fatality rate of 6%. Preoperative tachypnoea, hepatomegaly, cardiac failure and pulmonary hypertension were strongly associated with poor outcome. Conclusions : The programme was an arduous exercise for all organizations concerned, but achieved comparatively good short-term outcomes. The experience gained should assist in planning for similar programmes.

Rock fracture mean trace length estimation and confidence interval calculation using maximum likelihood methods

There has been a resurgence of interest in the mean trace length estimator of Pahl for window sampling of traces. The estimator has been dealt with by Mauldon and Zhang and Einstein in recent publications. The estimator is a very useful one in that it is non-parametric. However, despite some discussion regarding the statistical distribution of the estimator, none of the recent works or the original work by Pahl provide a rigorous basis for the determination a confidence interval for the estimator or a confidence region for the estimator and the corresponding estimator of trace spatial intensity in the sampling window. This paper shows, by consideration of a simplified version of the problem but without loss of generality, that the estimator is in fact the maximum likelihood estimator (MLE) and that it can be considered essentially unbiased. As the MLE, it possesses the least variance of all estimators and confidence intervals or regions should therefore be available through application of classical ML theory. It is shown that valid confidence intervals can in fact be determined. The results of the work and the calculations of the confidence intervals are illustrated by example. (C) 2003 Elsevier Science Ltd. All rights reserved.

Stereological and other methods applied to rock joint size estimation - Does Crofton's theorem apply?

A number of authors concerned with the analysis of rock jointing have used the idea that the joint areal or diametral distribution can be linked to the trace length distribution through a theorem attributed to Crofton. This brief paper seeks to demonstrate why Crofton's theorem need not be used to link moments of the trace length distribution captured by scan line or areal mapping to the moments of the diametral distribution of joints represented as disks and that it is incorrect to do so. The valid relationships for areal or scan line mapping between all the moments of the trace length distribution and those of the joint size distribution for joints modeled as disks are recalled and compared with those that might be applied were Crofton's theorem assumed to apply. For areal mapping, the relationship is fortuitously correct but incorrect for scan line mapping.

Selecting methods to solve multi-well master equations

There are several competing methods commonly used to solve energy grained master equations describing gas-phase reactive systems. When it comes to selecting an appropriate method for any particular problem, there is little guidance in the literature. In this paper we directly compare several variants of spectral and numerical integration methods from the point of view of computer time required to calculate the solution and the range of temperature and pressure conditions under which the methods are successful. The test case used in the comparison is an important reaction in combustion chemistry and incorporates reversible and irreversible bimolecular reaction steps as well as isomerizations between multiple unimolecular species. While the numerical integration of the ODE with a stiff ODE integrator is not the fastest method overall, it is the fastest method applicable to all conditions.

A comparison of two methods for the calculation of accumulated oxygen deficit

The aim of this study was to compare accumulated oxygen deficit data derived using two different exercise protocols with the aim of producing a less time-consuming test specifically for use with athletes. Six road and four track male endurance cyclists performed two series of cycle ergometer tests. The first series involved five 10 min sub-maximal cycle exercise bouts, a (V) over dotO(2peak) test and a 115% (V) over dotO(2peak) test. Data from these tests were used to estimate the accumulated oxygen deficit according to the calculations of Medbo et al. (1988). In the second series of tests, participants performed a 15 min incremental cycle ergometer test followed, 2 min later, by a 2 min variable resistance test in which they completed as much work as possible while pedalling at a constant rate. Analysis revealed that the accumulated oxygen deficit calculated from the first series of tests was higher (P< 0.02) than that calculated from the second series: 52.3 +/- 11.7 and 43.9 +/- 6.4 ml . kg(-1), respectively (mean +/- s). Other significant differences between the two protocols were observed for (V) over dot O-2peak, total work and maximal heart rate; all were higher during the modified protocol (P

Online titrimetric and off-gas analysis for examining nitrification processes in wastewater treatment

The two steps of nitrification, namely the oxidation of ammonia to nitrite and nitrite to nitrate, often need to be considered separately in process studies. For a detailed examination, it is desirable to monitor the two-step sequence using online measurements. In this paper, the use of online titrimetric and off-gas analysis (TOGA) methods for the examination of the process is presented. Using the known reaction stoichiometry, combination of the measured signals (rates of hydrogen ion production, oxygen uptake and carbon dioxide transfer) allows the determination of the three key process rates, namely the ammonia consumption rate, the nitrite accumulation rate and the nitrate production rate. Individual reaction rates determined with the TOGA sensor under a number of operation conditions are presented. The rates calculated directly from the measured signals are compared with those obtained from offline liquid sample analysis. Statistical analysis confirms that the results from the two approaches match well. This result could not have been guaranteed using alternative online methods. As a case study, the influences of pH and dissolved oxygen (DO) on nitrite accumulation are tested using the proposed method. It is shown that nitrite accumulation decreased with increasing DO and pH. Possible reasons for these observations are discussed. (C) 2003 Elsevier Science Ltd. All rights reserved.

Use of confocal microscopy to follow the development of penetrative hyphae during growth of Rhizopus oligosporus in an artificial solid-state fermentation system

Two methods were compared for determining the concentration of penetrative biomass during growth of Rhizopus oligosporus on an artificial solid substrate consisting of an inert gel and starch as the sole source of carbon and energy. The first method was based on the use of a hand microtome to make sections of approximately 0.2- to 0.4-mm thickness parallel to the substrate surface and the determination of the glucosamine content in each slice. Use of glucosamine measurements to estimate biomass concentrations was shown to be problematic due to the large variations in glucosamine content with mycelial age. The second method was a novel method based on the use of confocal scanning laser microscopy to estimate the fractional volume occupied by the biomass. Although it is not simple to translate fractional volumes into dry weights of hyphae due to the lack of experimentally determined conversion factors, measurement of the fractional volumes in themselves is useful for characterizing fungal penetration into the substrate. Growth of penetrative biomass in the artificial model substrate showed two forms of growth with an indistinct mass in the region close to the substrate surface and a few hyphae penetrating perpendicularly to the surface in regions further away from the substrate surface. The biomass profiles against depth obtained from the confocal microscopy showed two linear regions on log-linear plots, which are possibly related to different oxygen availability at different depths within the substrate. Confocal microscopy has the potential to be a powerful tool in the investigation of fungal growth mechanisms in solid-state fermentation. (C) 2003 Wiley Periodicals, Inc.