Projeto de um edifício para fins educacionais com foco na racionalização do consumo de água

The urban growth without the prior infrastructure has caused many environmental impacts such as the damage to quality of the water resources in the cities. Along with natural scarcity in some regions, this is one of the factors that limit the availability of drinking water. As a result, the conservation of drinking water is becoming one of the major concerns in sustainable architectural projects. Within this context, this dissertation proposes to develop the design of an educational building focusing on water consumption rationalization. The proposed project is located in UFRN Campus at Currais Novos, an area of warm and dry climate and low rainfall. The proposal seeks to integrate ways to reduce water consumption o to architecture, in order to exploit the advantages and savings. After quantifying the benefits achieved, it was concluded that it is possible to reduce significantly the drinking water consumption in educational buildings in universities using three principles: reduction the water consumption at the point of use, replacement of the water source and internal recycling. Calculations and simulations indicated that the proposed building may have water consumption up to 56% lower than if it would be provided by conventional facilities. Rationalization of water consumption brings direct and indirect benefits, with influences on the environmental, social and economic fields

Mapeamento cromossômico de genes ribossomais em espécies estuarinas da família Gerreidae Identificação de uniformidade cariotípica e sua empregabilidade com fins biotecnológicos - REPROGEN

Perciformes are dominant in the marine environment, characterized as the largest and most diverse fish group. Some families, as Gerreidae, popularly known as silver jennies, carapebas, or mojarras have a high economic potential to marine fish farming, natural explotation and game fishing. Genetic information of these species are of fundamental importance for their management and production. Despite exist over 13,000 marine fish species described, only 2% were cytogenetically analyzed and less than 1% have some reproductive characteristics known. Induced breeding, cytogenetic characterization and cryopreservation of gametes, represent important areas in applied fish studies. In this project cytogenetic analyzes were performed to acess genetic aspects of Gerreidae species, distributed in coastal and estuarine regions of Northeast Brazil. Different methods for identifying chromosomal regions were employed using conventional techniques (Ag-NORs, C-banding), staining with base-specific fluorochromes (DAPI-CMA3), and physical mapping of ribosomal genes 18S and 5S rDNA, through hybridization in situ with fluorescent probes (FISH). The six species analyzed showed remarkable chromosome conservatism. The 18S and 5S ribosomal genes when analyzed in phylogenetic perspective demonstrate varied evolutionary dynamics, suggesting ocurrence of stasis process in some groups and greater dynamism in others. Double FISH with 18S and 5S probes showed both how efficient cytotaxonomic markers in the homogeneous karyotypes of this group of species. The karyotypic pattern identified in addition to the evolutionary aspects of karyotype, are suggestive of existence of low potential of post-zygotic barrier, prompting further research to prospect for artificial interspecific hybridization of these species of commercial importance

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Qualidade da água e composição fitoplanctônica de um viveiro de piscicultura utilizado para fins de pesca esportiva e irrigação

Water quality of a fish pond used by UNESP, at Jaboticabal, SP, Brazil, for both fishing and irrigation has been evaluated according to certain limnological parameters and to its phytoplankton composition. During the year, four sampling sites were assigned at the pond: P(1)=inlet water in the pond; P(2)=inlet water from a shrimp pond; P(3)=irrigation spot; and P(4)=outlet water (water flowing directly into another pond). The collected data show a water pond with high concentration of nutrients and chlorophyll-a, and high values of electrical conductivity, total hardness and total dissolved solids, proceeding from the above pond. These factors affected substantially some biological parameters, such as chlorophyll-a and phytoplankton. In P(3), whereas class Zygnematophyceae showed the highest specimens richness, with 34.01%, the Chlorophyceae, that had the highest number of genera, comprehended 33.52% of the total number of individuals. The use of the water fish pond for irrigation must be re-evaluated, due to eutrophic conditions of the water, the presence of potentially toxic cyanobacteria, so as the proper management employed.

Estimativa da erodibilidade do solo para fins conservacionistas na microbacia córrego do Tijuco, SP

The soil erodibility factor is represented by the integrated effect of processes that regulate the water infiltration, soil resistance and the transport of soil particles. Therefore, this study had as objective to estimate the soil erodibility in the Corrego do Tijuco watershed, São Paulo State, Brazil, for guiding farmers in decision making for application of techniques for soil conservation. The soil samples were collected in a regular spacing of 500 m, resulting in a total of 310 points in a 0-20.0 m depth in an area of approximately 8,000 ha. For the estimation of soil erodibility (K) was applied a mathematical model which takes into account the soil organic matter content, the sand and silt size fractions, the soil permeability, and the particle mean diameter for each point of soil sampling. Estimated values greater than 0.040 Mg ha h ha(-1) MJ(-1) mm(-1) were considered very high for this factor. In areas with greater degree of erodibility occurs the Argisols order predominance, that shows high susceptibility to the development of interrill erosion due to its remarkable performance in relation to textural gradient, thereby, the interrill erosion rates can be very intensive due to rapid saturation of upper horizon, increasing the erosion process. At the Latosols (Oxisols) areas were also observed high soil erodibility values that under inappropriate conditions of soil occupation, concentrating runoff of rain water, leading to appear deep gullies.

Gestão estratégica no terceiro setor: uma análise comparativa da construção de mapas estratégicos de organizações sem fins lucrativos

The strategy has an important role in organizations by identifying factors that need to be emphasized to organizational success and strategic map currently contemplates as a preview of organizational strategy, prepared from your planning. Third sector organizations need to take a competitive posture, establishing a sustainable position and maximizing the use of resources towards their social or humanitarian goals. This research aims to investigate the process of building strategic maps of two non-profit organizations by identifying and characterizing the steps common to these organizations. The research is characterized as qualitative descriptive and applied knowledge. Developed from bibliographical reviews and participant observation gathered in a case study, the data was collected in two third sector organizations and the results show that how to conduct the process may influence directly on your result lists. Among the steps identified, emphasis can be given to the formation of a team, the definition of strategy, the definition of strategic objectives, the gathering of those goals into perspective and the identification of the cause-effect relationship that relate. Marked as optional, but effective, conducting an event outside the premises of the company to complete the process, or any portion thereof. However, stands out as essential the active participation of senior management in the process, as a way to give credit to the initiative. These steps, its characteristics and its factors are described from comparisons between the processes adopted by the organizations surveyed

Viabilidades térmica, econômica e de materiais de um sistema solar de aquecimento de água a baixo custo para fins residenciais

An solar alternative system for water heating is presented. Is composed for one low cost alternative collector and alternative thermal reservoir for hot water storing. The collector of the system has box confectioned in composite material and use absorption coils formed for PVC tubes. The box of hot water storage was confectioned from a plastic polyethylene drum used for storage of water and garbage, coated for a cylinder confectioned in fiber glass. The principle of functioning of the system is the same of the conventionally. Its regimen of work is the thermosiphon for a volume of 250 liters water. The main characteristic of the system in considered study is its low cost, allowing a bigger socialization of the use of solar energy. It will be demonstrated the viabilities thermal, economic and of materials of the system of considered heating, and its competitiveness in relation to the available collectors commercially. Relative aspects will be boarded also the susceptibility the thermal degradation and for UV for the PVC tubes. It will be shown that such system of alternative heating, that has as main characteristic its low cost, presents viabilities thermal, economic and of materials

Extração do óleo e caracterização dos resíduos da borra de petróleo para fins de reuso

The petroleum industry, in consequence of an intense activity of exploration and production, is responsible by great part of the generation of residues, which are considered toxic and pollutants to the environment. Among these, the oil sludge is found produced during the production, transportation and refine phases. This work had the purpose to develop a process to recovery the oil present in oil sludge, in order to use the recovered oil as fuel or return it to the refining plant. From the preliminary tests, were identified the most important independent variables, like: temperature, contact time, solvents and acid volumes. Initially, a series of parameters to characterize the oil sludge was determined to characterize its. A special extractor was projected to work with oily waste. Two experimental designs were applied: fractional factorial and Doehlert. The tests were carried out in batch process to the conditions of the experimental designs applied. The efficiency obtained in the oil extraction process was 70%, in average. Oil sludge is composed of 36,2% of oil, 16,8% of ash, 40% of water and 7% of volatile constituents. However, the statistical analysis showed that the quadratic model was not well fitted to the process with a relative low determination coefficient (60,6%). This occurred due to the complexity of the oil sludge. To obtain a model able to represent the experiments, the mathematical model was used, the so called artificial neural networks (RNA), which was generated, initially, with 2, 4, 5, 6, 7 and 8 neurons in the hidden layer, 64 experimental results and 10000 presentations (interactions). Lesser dispersions were verified between the experimental and calculated values using 4 neurons, regarding the proportion of experimental points and estimated parameters. The analysis of the average deviations of the test divided by the respective training showed up that 2150 presentations resulted in the best value parameters. For the new model, the determination coefficient was 87,5%, which is quite satisfactory for the studied system

Amostragem de terra para fins de fertilidade em função da ferramenta de amostragem

Embora existam indicações de que a pá de corte proporcione melhor qualidade de amostragem de terra para fins de análise de fertilidade, seu manuseio demanda muito tempo. No presente trabalho foram comparados os resultados da análise química de terra proveniente de 15 áreas distintas, cujas amostras foram obtidas com cinco tipos de trado e com pá de corte. Também foram comparados o tempo demandado para a realização do trabalho e o volume de terra coletado com as diferentes ferramentas, em dois solos de texturas distintas. O tempo médio de amostragem foi estimado, avaliando-se o tempo gasto por seis pessoas para tomar dez amostras. Para o estudo de qualidade de resultados foram amostradas 15 áreas, com solos, manejos e níveis de fertilidade distintos, de modo a se obter grande variação entre os valores das características avaliadas. As amostragens constaram da estratificação por profundidades e amostras de 0 a 20 cm de profundidade no teste de tempo. A amostragem com a pá de corte demora de 1,3 a 2,3 vezes mais do que com os trados. Para os valores de pH, matéria orgânica, acidez do solo, Al trocável e P disponível, os resultados foram equivalentes para todas as ferramentas empregadas. Entretanto, para as bases do solo (Ca, Mg e K), as ferramentas empregadas resultaram, na maioria das vezes, em resultados diferentes dos obtidos pela pá de corte.