Response surface optimization of D(-)-lactic acid production by Lactobacillus SMI8 using corn steep liquor and yeast autolysate as an alternative nitrogen source

Funda����o de Amparo �� Pesquisa do Estado de S��o Paulo (FAPESP)

Metal fluxes at the sediment-water interface in rivers in the Turvo/Grande drainage basin, So Paulo State, Brazil

Funda����o de Amparo �� Pesquisa do Estado de S��o Paulo (FAPESP)

Investiga����o da Interface Metal-Porcelana da Liga Ni-Cr-Mo Soldada a LASER

The interface formed between the metal and the porcelain of a LASER welded Ni-Cr-Mo alloy was studied. The characterization was carried out through optical microscopy, scanning electron microscopy, X-ray dispersive spectroscopy-EDS and mechanical testing by three-point flexion test-TPE in the region LASER welded with and without the porcelain. The porcelain adhesion with the alloy alone is possible after the oxidation of the metallic surface and subsequent application of an adhesive called opaco. The applied porcelain, on the base metal and fusion zone presented some distinct behaviors. After the TPF test the base metal presented fractures while that in the fusion zone was completely gone. One noticed that the region submitted to the LASER welding showed less porcelain adhesion than the region of the base metal due to the microestructural refinement of the fusion zone. These results can be evidenced by the EDS of the studied regions. The TPF had demonstrated that the Ni-Cr-Mo alloy submitted to the LASER welding, undergone significant alterations in its mechanical properties after the application of the porcelain.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

Sm-Nd system in total rock open versus closed isotopic composition in zones of high deformation

High strain shear zones of Brasiliano age, developed in Paleoproterozoic basement gneiss of the Caic�� region, Borborema Province, NE Brazil, were associated with medium- to low-grade metamorphism and deformational processes that transformed porphyritic augen gneiss into muscovite quartzite, modifying their original mineralogy and chemical properties. During the last hydrothermal event mobility of major, minor and trace elements was great, whereas the pattern of Rare Earth Elements was not changed. We carried out a Sm-Nd isotopic study in these rocks in order to understand the behavior of Nd isotopes during mylonite generation. TDM model ages at around 2.6 Ga and ��Nd (t) values for both protolith and transformed rock suggest that the Nd isotopic system remained closed, recording the original source rock signature, despite undergoing two superposed metamorphic events. These new Sm-Nd results provide important information on the geologic evolution of basement rocks in the central Rio Grande do Norte Terrane of the Borborema Province, NE Brazil.

Investigation of the metal/porcelain interface in LASER-welded Ni-Cr-Mo alloy

The interface formed between the metal and the porcelain of laser-welded Ni-Cr-Mo alloy was studied on a metallurgical basis. The characterization was carried out by using optical microscope, electron scan microscopy and X-ray dispersive spectroscopy techniques and mechanical three-point flexion tests, in the laser-welded region, with and without porcelain. The union of the porcelain with the alloy is possible only after the oxidation of the metallic surface and the subsequent application of a bonding agent known as opaque. The porcelain applied to the base metal and weld bead showed different behaviours - after the flexion test, the base metal showed cracks, while that in the weld bead broke away completely. It was noted that the region subjected to laser welding had lower adherence to the porcelain than the base metal region, due to microstructural refinement of the weld bead. These results can be shown by the X-ray dispersive spectroscopy carried out on the regions studied. The flexion tests demonstrated that the Ni-Cr-Mo alloy subject to laser welding had significant alterations in its mechanical properties after application of the porcelain.

An��lise geoambiental da regi��o de mar��lia, SP: Suscetibilidade a processos erosivos frente ao hist��rico de ocupa����o da ��rea

The study area comprises the western portion of the Mar��lia Plateau, State of S��o Paulo, southeastern Brazil. The geological substrate encompasses Cretaceous sedimentary rocks of the Bauru Group and local Neocenozoic units like colluvium aprons, fluvial terrace deposits, in situ regoliths, and modern alluvial deposits. In a geomorphologic sense, the study area might be characterized as showing two main pediplanes, viz. P1 Surface (upper) and P2 Surface (lower), both surfaces are presently under dissecation processes. After the 1920's the expansion of the railroad system fostered the removal of the natural vegetation, which in turn was followed by the introduction of coffee, peanut, corn and cotton crops. This intense exploitation was conducted without respect to the soil carrying capacity and its natural susceptibility to erosional processes, including an aggressive form known as vo��oroca. As a result, the study shows that the most susceptible material includes colluvium aprons, in situ regoliths, and colluvium-alluvium or alluvium deposits. The most critical situation is in the P2 Surface context, near the bottom of the Mar��lia Plateau scarpment, where surface runoff can be very strong. Another point of active erosion is represented by the exposed walls of gullies and vo��orocas, mainly in fluvial reaches subjected to talweg lowering. In a general sense, this study shows current evidence of erosional stability due to the ��ntroduction of pastures as a predominant type of land occupation and to a series of erosion control procedures. Among these actions are terrace implantation, construction of small pits for runoff control, natural or induced reforestation by land owners. Despite these efforts, some erosion points remain chiefly in steeper country roads and trail stretches, in areas of concentration of cattle tracks (e.g., near cattle ponds), gullies or vo��orocas exposed walls, and badly planned urbanization. The permanence of these erosion points demonstrates the necessity of a continuous monitoring of surface dynamics as well as a rapid and effective intervining measures of erosion and/or silting control.

Climate Change and Development in Latin America and the Caribbean. Overview 2009

Includes bibliography

Agricultural incentives, growth and poverty in Latin America and the Caribbean: cross-country evidence for the period 1960-2005. Did trade liberalization increase the incomes of the poorest?

Includes bibliography

The international competitiveness of the Costa Rican clothing industry

Includes bibliography

Avalia����o das principais t��cnicas para obten����o de MPPT de pai��is fotovoltaicos

Electrical energy from photovoltaic panels (PV) has became an increasing viable alternative because of the great concern for environmental preservation and the possibility of the reduction of the conventional fuels, and this natural energy source is free, abundant and clean. In addition, Brazil is a privileged country because of the high levels of irradiation throughout its territory all over the year. Thus the exploitation of the energy from PV is one of the best alternatives to overcome the supply electrical energy issues. However, nowadays the energy conversion efficiency is low and the initial costs are high for these energy systems. Therefore, in order to increase the efficiency of these systems the extraction of the maximum power point (MPP) from PV is extremely necessary, and it is done using the maximum power point tracking (MPPT) techniques. The MPP of the PV varies non linearly with the environmental conditions and several MPPT techniques are available in literature, and this paper presents a careful comparison among the most usual techniques, doing meaningful comparisons with respect to the amount of energy extracted, PV voltage ripple, dynamic response and use of sensors, considering that the models are implemented via MatLab/Simulink��. �� 2010 IEEE.

Main maximum power point tracking strategies intended for photovoltaics

This paper presents evaluations among the most usual MPPT techniques, doing meaningful comparisons with respect to the amount of energy extracted from the photovoltaic panel (PV) (Tracking Factor - TF) in relation to the available power, PV voltage ripple, dynamic response and use of sensors. Using MatLab/Simulink�� and DSpace platforms, a digitally controlled boost DC-DC converter was implemented and connected to an Agilent Solar Array E4350B simulator in order to verify the analytical procedures. The main experimental results are presented and a contribution in the implementation of the IC algorithm is performed and called IC based on PI. Moreover, the dynamic response and the tracking factor are also evaluated using a Friendly User Interface, which is capable of online program power curves and compute the TF. Finally, a typical daily insulation is used in order to verify the experimental results for the main PV MPPT methods. �� 2011 IEEE.

Desenvolvimento de interface amig��vel de rotina em linguagem c++ para o processamento aritm��tico e estat��stico de dados censit��rios

A routine was developed in C++ for the processing of social and environmental census data acquired by the Brazilian Institute of Geography and Statistics (IBGE). The routine employs a simple graphical environment. The data generated are presented in a tabular format, which facilitates a broad and objective view of the values, and provides a convenient means of querying the database. The source code used to develop the routine permits updates and changes, as required by the user. Statistical and mathematical analysis enables the generation of social and environmental indicators, together with quantitative and qualitative classification of the socio-environmental quality of the region analyzed. As an example, the routine was applied using census data for the city of Sorocaba (S��o Paulo State, Brazil), including conditions of household occupation, water supply, sanitation, level of education, income, and other factors. It is envisaged that the proposed analytical model will assist professionals from different fields of research and teaching to develop urban planning and management strategies.

International migration, human rights and development in Latin America and the Caribbean: summary and conclusions

Includes bibliography

Crystalline rock outcrops in the Atlantic Forest of northeastern Brazil: Vascular flora, biological spectrum, and invasive species

We studied the vegetation of two crystalline rock outcrops in the Atlantic Forest of northeastern Brazil. We recorded typically rupicolous species, which are rare or classified as extremely endangered, such as Aechmea guainumbiorum, found exclusively in one of the study sites. In both areas there was a predominance of therophytes over other life-forms, in contrast to observations made in rock outcrops of the southern Atlantic Forest. Therophytes also stood out in other rock outcrops at similar latitudes as our study site, regardless of the surrounding vegetation. Plants of other life-forms had significantly lower richness and showed adaptations to drought, such as succulent stem, pseudobulbs, dense pilosity, and underground storage organs. Our results suggest that invasive species may modify the vegetation of crystalline rock outcrops, as they change the number of species of all life-forms in comparison between sites. Hence, our results present the biological identity of these rupicolous habitats, which are marginal to forests, and point to the need for conserving them, in order to protect the Atlantic Forest's biodiversity. �� 2013 Botanical Society of Sao Paulo.