484 resultados para contração concêntrica
Resumo:
Introdução: A utilização de diferentes intensidades em sessões de exercícios com pesos, para os músculos extensores do cotovelo, tem proporcionado diferenças na sustentabilidade das repetições e no volume total. Entretanto, devido às alterações do desempenho neuromuscular inter-membros, tais evidências não podem ser extrapoladas para membros inferiores. Objetivo: Comparar a resposta aguda de sessões de exercício com pesos, realizadas com diferentes intensidades, na sustentabilidade das repetições e no volume total, em idosas treinadas. Materiais e Métodos: Participaram do estudo 16 idosas (68,3 +-6,0 anos) treinadas com pesos. Os dados foram coletados em cinco sessões, separadas por no mínimo 48 horas de descanso. A intensidade, em quilogramas, do teste de repetições máximas (15 RM) foi determinada nas duas primeiras visitas e confirmada na terceira. Nas quarta e quinta visitas, foram realizadas as sessões com as diferentes intensidades (em uma sessão - três séries até a fadiga muscular concêntrica, com a intensidade de 100% de 15 RM; na outra sessão - duas séries de 15 repetições e na terceira série até a fadiga muscular concêntrica, com a intensidade de 90% de 15 RM). Em ambas as sessões, o intervalo de recuperação utilizado entre as séries foi de dois minutos. Todas as participantes realizaram ambos os protocolos e um delineamento crossover balanceado foi utilizado para determinar a ordem das sessões. Resultados: O teste t de Student para amostras dependentes demonstrou que o volume total da sessão de teste com 90% de 15 RM foi significativamente superior (22,5%; P < 0,01) ao da sessão com 100% de 15 RM. A ANOVA indicou efeitos principais de condição, momento ...(Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
A natação é um esporte praticado em um meio que oferece grande resistência ao deslocamento do atleta que necessita realizar grande força com a articulação do ombro durante as braçadas sendo, desse modo, de fundamental importância a avaliação da força desta articulação. São poucos os estudos que avaliam a força desta articulação em nadadores visando o desempenho esportivo. OBJETIVO: Verificar a reprodutibilidade do pico de torque (PT) e da taxa de desenvolvimento de força (TDF) dos rotadores internos do ombro em nadadores. MÉTODOS: Foram analisados 10 nadadores que realizaram 5s de contração isométrica, 5 contrações concêntricas em baixa velocidade (60°/s), e 5 contrações concêntricas em alta velocidade (180°/s). Foram determinados o PT e a TDF dos membros dominante e não-dominante. Após um intervalo de uma semana, os indivíduos foram testados novamente, sob as mesmas condições do primeiro teste, e foi avaliado o grau de confiabilidade. RESULTADOS: Os valores de PT foram similares entre as tentativas (p > 0,05). O coeficiente de correlação intraclasse (CCI) do PT isométrico foi de 0,76 e 0,85 (p < 0,05), na contração isocinética a 60º/s foi de 0,56 (p > 0,05) e 0,90 (p < 0,05) e na contração isocinética a 180º/s foi de 0,84 e 0,76 (p < 0,05), para o membro dominante e não dominante respectivamente. A TDF pico não foi significantemente diferente entre os testes para ambos os membros (p > 0,05), porém não houve correlação significante entre os testes para ambos os membros (p > 0,05). CONCLUSÃO: Conclui-se que o teste isocinético de rotação interna do ombro em nadadores apresenta boa reprodutibilidade para a determinação do PT. Não foi observada boa reprodutibilidade para a TDF pico, provavelmente pelo baixo número de voluntários
Resumo:
Alloy Al-7%Si-0,3Mg (AA356), having an excellent combination of properties such as low solidification shrinkage and good fluidity, good weldability, high wear resistance, high strength to weight particularly in the automotive and aerospace engineering. The refinement of the structure aluminum silicon eutectic alloy is a fairly common practice in the casting, through the treatment knows as modification. You can get the modification for the addition of chemicals and rare earths, these have the ability to modify the structure of the eutectic, but only sodium and strontium produce a strong action modifier when used in low concentrations. The modifying effect of silicon grain turns into a fibrous form branched and enveloped by the metal matrix in the form of a composite structure that has the highest limit of tensile strength, ductility and machinability. This work will be obtained AA356 alloy ingots using two different types of molds: metal mold and sand mold. Macrographs will be made in ingots obtained for observation of the macrostructures obtained in both types of ingots. Will be sampled at strategic locations of the ingots to correlate microstructure and cooling rate. The results showed that the material of the ingot has a strong influence on the resulting micro-andmacrostructure
Resumo:
A insuficiência cardíaca (IC) está associada a miopatia dos músculos esqueléticos dos membros, com perda da massa muscular, diminuição na proporção das fibras do tipo I (contração lenta) e aumento na proporção das fibras do tipo II (contração rápida). É provável que alterações na expressão de fatores de transcrição pertencentes à família “basic helix-loop-helix” (bHLH), da qual fazem parte a MyoD, Miogenina, Myf5 e o MRF-4, conhecidos como fatores de regulação miogênica (MRFs), sejam responsáveis pelas mudanças nos tipos de fibras. Enquanto que a Miogenina é expressa em níveis superiores aos da MyoD em músculos lentos, o oposto é verdadeiro para músculos rápidos. Similarmente, a MyoD está associada com a expressão das isoformas de miosina de cadeia pesada rápidas dos tipos IIX e IIB. Estudos in vitro, demonstraram que o TNF-α inibe a expressão de MyoD e miogenina diminuindo a atividade de genes músculo específicos. A ação do TNF-α diminuindo a expressão da MyoD mostra-se mais acentuada quando em associação com o IFN-γ, no entanto, há poucas informações na literatura a respeito do papel desta associação na expressão dos fatores de regulação miogênica, in vitro. Avaliar a expressão dos fatores de regulação miogênica, MyoD, miogenina, Myf5, e MRF-4 em cultura de mioblastos C2C12 submetidos ao TNF-α/IFN-γ. Nossos resultados mostraram um aumentou na expressão dos gene MyoD, Myf5 e miogenina sob tratamento com IFN-γ quando comparado aos grupos controle e TNF-α/IFN-γ. A expressão gênica do MRF-4 na cultura de células não foi detectada em nenhum dos grupos analisados. O GAPDH foi utilizado para normalizar os valores de expressão dos outros genes analisados. O presente estudo demonstrou que o IFN-γ exógeno administrado à culturas de mioblastos... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Tricyclic antidepressants, such as amitriptyline, are inhibitors of serotonin and norepinephrine neuronal reuptake and this action has been implied in changes in pain threshold supporting its use to alleviate neuropathic pain. Although is known that 1 adrenoceptors participate in the antinociceptive effect of amitriptyline it is unclear which receptor subtype is the target for the increased synaptic levels of norepinephrine resultant from the inhibition of neuronal uptake. Paradoxically, several tricyclic antidepressants including amitriptyline also behave as antagonists of 1 adrenoceptors with different affinities for its subtypes: these drugs have 10 to 100-fold higher affinities for 1A than for 1B and 1D adrenoceptors. This work investigated the involvement of 1 adrenoceptors subtypes in the antinociceptive effect of the amitriptyline in a constriction of the sciatic nerve in rats by determining the effects of subtype selective 1 adrenoceptors antagonists. Fifteen days later, mechanical hyperalgesia was analyzed in a Randall-Selitto test. The 1A-selective antagonist RS100329 was the most potent antagonist of the contractions of the rat prostate, whereas the 1D-selective antagonist BMY 7378 (up to 100g/Kg) was unable to affect these contractions. The antagonist prazosin, BMY 7378 and 5-methyl urapidil inhibited the antinociceptive effect of the amitriptyline. However, the highly selective 1A adrenoceptor antagonist RS100329 was unable to affect the antinociception induced by amitriptyline. These results point out that 1B and/or 1D adrenoceptors, but not 1A, are involved in the antinociceptive effects of amitriptyline
Resumo:
The objective of the present study was to compare in which part (lower limb or upper limb) the repeated bout effect has the greatest magnitude. Twelve males individuals with no recent (6 months) experience with resisted training participated in this study. The subjects were randomly divided into two groups (legs and arms) and came to the laboratory 5 times. 1st) adaptation to the dynamometer. 2nd) to perform one bout of eccentric exercise (EE) and provide markers such as isometric peak torque (IPT), delayed onset muscle soreness (DOMS) (both collected before and after the bout) and concentration of the creatine kinase (CK) enzyme in the blood (only before the bout). 3rd) 48 after the first bout the same markers were collected again. After 14 days, the methodologies used in the 2nd and 3rd visits to the laboratory were repeated respectively to determine the repeated bout effect. A significant decrease of IPT and a significant increase of CK and DOMS were found immediately after and 48 hours after the first bout of EE for the arms group. The legs group showed a significant increase in CK (48 hours after the EE) and DOMS (immediately after the EE) resulting from the first bout. In the arms group, the second bout did not cause significant increase in CK or DOMS on any of the situations, however, it provoked a decrease in force production immediately after the EE. The legs group showed a significant increase of DOMS immediately after the second bout of EE, which caused no significant increase in CK. The only marker in which the repeated bout effect happened for both groups was CK. No significant difference was found between the protections for both groups. Taking into account the results, it’s been discussed whether there is a relation between the susceptibility to muscle damage and the repeated bout effect, and also...(Complete abstract click electronic access below)
Resumo:
Several hormonal and physiological changes that occur during pregnancy directly affect gastrointestinal motility (GI), however, very little is known about the relationship between the electrical and mechanical activities of the stomach and its implications. The aim of this study was to compare the female sex hormones, with profiles of gastrointestinal motility using AC biosusceptometry (BAC) in pregnant rats. Seven female Wistar rats (weighing 250-350 g) were used and all procedures were approved by the local Ethics Committee of animal. Laparotomy was performed on anesthetized rats and a magnetic marker (3.5 mm in diameter and 3.0 mm height) was implanted in the distal stomach. After 10 days of recuperation, the mice were put to mate until confirmation of pregnancy. Fed animals were anesthetized (mg pentobarbital 30 / kg) and kept supine for recording the signal with a sensor 30 min BAC placed on the abdominal surface on days 0, 7, 14 and 20 of gestation. Statistical analysis was performed by Student's t test statistical Newman-Keuls and a P value of .05 was considered statistically significant. The frequency of contraction of the stomach was 74 mHz ± 3, 67 ± 7 mHz, 59 mHz ± 6 (p <0.05 vs day -1) and 71 ± 5 mHz on days -0, -7, -14, and -20, respectively. The values of 44 ± 15 pg / mL and 31 ± 9 pg / ml 25 ± 6 pg / ml, 22 ± 9 pg / ml on days -0, -7, -14 and -20, respectively, obtained by 17ß- estradiol were not statistically significant. The values of progesterone were 13 ± 6 pg / ml at 54 ± 15 pg / ml, 127 ± 42 pg / ml (p <0.05 vs day-1), 22 ± 13 pg / mL on day -0, - 7, -14 and -20, respectively. A linear correlation (Pearson's test) between the lower frequency gastric and increased levels of progesterone was 80% (p <0.0000001). Until then, the relationship between changes in motility and hormone were not described in detail, but with the work that we were able to demonstrate the high correlation between progesterone concentration ...
Resumo:
The Biosusceptometry AC (BAC) is a research tool that has been extensively explored by the group Biomagnetism IBB-UNESP for monitoring of the gastrointestinal tract, its response to a known drug or in vivo performance of solid dosage forms. During this period the BAC, which has the characteristics of high sensitivity and low cost, has been developed primarily for recording signals contraction of activity and traffic human gastrointestinal tract. With the possibility of producing images with this instrumentation, it was possible to evaluate different situations in vitro and in vivo for physiological studies and pharmaceuticals. Considering the good performance of this system to produce planar images, the first aim of the BAC system tomography (TBAC) was to evaluate the system performance of BAC to produce tomographic images of phantoms ferromagnetic for a single channel system. All these applications were only possible because of their sensitivity to materials of high magnetic suscepitibility as ferrite, which allow to produce an electrical signal proportional to the variation of the magnetic flux generated by the presence of magnetic marker next to a first-order gradiometer. Measuring this variation at various points was possible to generate planar images that recently came to be produced in systems with multiple detectors, said multi-channels. From planar images, also producing tomographic images of simulators BAC bars in a system of 13 channels using only the center channel, with good results when applied to simple objects as one and two bars. When testing the resolution of the system with more elaborate forms the quality and resolution of images reconstructed is not satisfactory, which would be solved by increasing the spatial sampling rate and hence the acquisition time. The present system works with an acquisition time of about five hours. Whereas this system will be applied for in vivo experiments, the acquisition time became a ...
Resumo:
A função normal dos músculos escapulotorácicos é um dos componentes vitais para a estabilidade dinâmica do complexo do ombro. A maioria dos estudos aborda o controle dinâmico da escápula, porém o comportamento muscular no controle estático da mesma tem sido menos frequente. O objetivo do estudo foi analisar a ação simultânea dos músculos serrátil anterior e as três porções do trapézio durante o movimento de rotação interna e externa do ombro, entre voluntários assintomáticos. 10 indivíduos com idade entre 20 e 40 anos foram avaliados com testes de movimentos de rotação do ombro direito e esquerdo, contra uma resistência elástica (40% da CIVM), para captação de EMG por meio de eletrodos de superfície nos músculos: trapézio ascendente (TA), trapézio transverso (TT), trapézio descendente (TD) e serrátil anterior (SA). Foram obtidos valores de Contração Isométrica Voluntária Máxima (CIVM) para os músculos rotadores do ombro e TA, TT, TD e SA. Os sinais foram normalizados pela CIVM e processados no software Matlab, gerando curvas médias de ativação simultânea para cada par muscular (TA/TT; TA/TD; TA/SA; TT/TD; TT/SA; e TD/SA). A quantidade de cocontração dos pares musculares foi baixa (variação média de 2,3% a 11% da CIVM), e os pares em combinação com o SA tiveram tendência de maiores valores; a variabilidade encontrada foi baixa e a confiabilidade foi adequada (ICC > 0,70). Os baixos valores de co-contração encontrados neste estudo eram esperados, concordando com a biomecânica do movimento utilizado e com os estudos que avaliaram os mesmos músculos em outras condições; o movimento de RE apresentou co-contração levemente maior que a RI e isto sugere que a RE é um movimento mais instável, além de ser considerado o movimento mais fraco do ombro. Diante dos resultados encontrados, conclui-se que a metodologia utilizada foi... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
O joelho, por suas características anatômicas e freqüente instabilidade e exposição as lesões tem o quadríceps como importante músculo a ser desenvolvido quanto ao seu trofismo e força. Composto de quatro porções distintas estas podem gerar diferentes vetores de força que podem ter relações diretas com o recrutamento de unidades motoras. O posicionamento articular, a conseqüente modificação do comprimento muscular e a intensidade da contração podem influenciar o desenvolvimento da força do quadríceps. Dentre as contrações relacionadas ao maior recrutamento de unidades motoras com o intuito do desenvolvimento de força está a contração isométrica. Dentre as contrações musculares, as isométricas têm sido frequentemente indicadas para aumentar a força e estabilidade articular em sessões de treinamento e reabilitação. Pelo exposto, o objetivo do estudo foi analisar os músculos vasto medial (VM) e vasto lateral (VL) por meio da eletromiografia de superfície durante 15s de contração isométrica a 20%, 30%, 40% e 50% da contração isométrica voluntária máxima – CIVM com o joelho a 90 graus. Foram utilizados eletrodos de superfície bipolar de Ag/AgCl, posicionados nos músculos VM e VL, um módulo de aquisição de sinais biológicos (Lynx) calibrado com ganho de 1000vezes, filtro de passa alta de 20Hz e de passa baixa de 500Hz. Uma célula de carga foi acoplada perpendicularmente à cadeira de teste especialmente desenvolvida para o estudo e utilizado uma indicador digital para retorno visual. Na análise estatística utilizou-se teste de Friedman e teste de Wilcoxon, e adotou-se nível de significância de p<0,05. Verificou-se que os músculos VM e VL foram semelhantes entre si, e entre as cargas, houve diferença significante entre as cargas de 20% e 40%, 20% e 50%, e 30% e 50% para ambos os músculos, com maior atividade nas cargas de 40% e 50% CVM... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
The objective of the present study was to compare the effects of a high speed isokinetic training (180°.s-1) and an isometric training (75°) on the maximum rate of force development (RFDmax) measured in the isokinetic and isometric modes. Twenty seven male non active subjects participated of this study (Mean + SD = body mass 78.6 + 14.1 kg; stature 175.1 + 8.9 cm; age 22.6 + 3.8 years). They were randomly divided into three groups: Control (GC); Isokinetic training (GISOC) and; Isometric training (GISOM). The subjects were submitted in different days to the following pre training protocols: 1) Familiarization to the isokinetic dynamometer tests; 2) Five maximum concentric isokinetic contractions of the knee extensors (180°.s-1) to access the maximum concentric torque (TMC) and the concentric RFDmax; 3) Two maximum isometric contractions of the knee extensors (75°) to access the maximum isometric torque (TMI) and the isometric RFDmax. The same tests were repeated after the training period, but without the familiarization session. Eighteen training sessions were performed (3 times per week). The GISOC performed the entire training whit concentric isokinetic contractions whit the speed of 180°.s-1. The GISOM performed the entire training whit isometric contractions whit the angle between the thigh end the leg being 75° (0° = full knee extension). TMI, TMC, concentric RFDmax, isometric RFDmax values of the GC was not different between pre and post training. GISOM increased only the TMI and the GSIOC increased the TMC, concentric RFDmax and isometric RFDmax. Furthermore, the GISOC had a higher percentage increase of the isometric RFDmax than the isokinetic RFDmax. Based on these results, it is possible to conclude that the increase in maximum strength corresponded to the training specificity theory, unlike to the RFDmax. Thus the use of isometric contraction ...(Complete abstract click electronic access below)
Resumo:
O presente estudo teve como objetivo identificar a fadiga muscular por meio da amplitude e freqüência do sinal eletromiográfico (EMG) do músculo vasto lateral (VL) e reto femoral (RF) do membro inferior direito, durante protocolo incremental de corrida em esteira e nas contrações isométricas submáximas realizadas no início e após cada velocidade. Participaram deste estudo 07 voluntários saudáveis, do gênero masculino, experientes em corrida na esteira, com idade média de 25 anos (± 4,3), sem antecedentes de doenças músculo-esqueléticas nos membros inferiores e de antropometria semelhante. Foram realizadas três contrações isométricas voluntárias máximas (CIVM = 100%) de extensão do joelho para posterior determinação da contração submáxima de 50% da CIVM (CI-50%). O protocolo de corrida foi composto de um aquecimento de 5 minutos (9 km/h), e após iniciou-se o teste com velocidade inicial de 10 km/h e incremento de 1 km/h a cada 3 minutos, até a exaustão voluntária, havendo uma pausa entre cada velocidade de aproximadamente 2 minutos. Antes do início da corrida e após cada velocidade realizou-se uma contração isométrica com 50% da CIVM (CI-50%) de 5s de duração. No sinal eletromiográfico coletado durante a corrida, os valores de RMS (Root Mean Square) dos músculos VL e RF foram obtidos no período correspondente a um ciclo completo da passada a 10% e 100% do tempo analisado (120 segundos finais de cada velocidade) por meio de rotina específica (Matlab). No sinal eletromiográfico coletado durante as CI-50% (5s), os valores de RMS e FM (freqüência mediana) foram obtidos no período de 1s (intervalo de 1 a 2s). A normalidade dos dados foi determinada através do teste de Shapiro-Wilk. Utilizou-se teste-t de Student para amostras pareadas, e o nível de significância (p) adotado foi de p<0,05. Os resultados...(Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
O desempenho locomotor de um indivíduo pode ser considerado produto de interações multivariadas em torno de sua morfo-fisiologia, sendo particularmente determinado pela maneira como seus músculos se contraem. Essa maneira como a contração ocorre é influenciada tanto por parâmetros energéticos (atividade enzimática e proporção de fibras de contração rápida); quanto estruturais (comprimento de fibras e tendões). Para quantificar a proporção de fibras musculares, foram obtidos cortes histológicos em criostato, de seis grupamentos musculares congelados de oito individuos de Tropidurus psammonastes e um grupamento muscular, o iliofibularis, de quatro individuos de Tropidurus semitaeniatus. Os cortes foram corados por meio de técnicas histoquímicas e as fibras contadas. O perfil metabólico foi contrastado entre os músculos de um mesmo indivíduo e essa comparação serviu de base também para interpretação em relação à informações semelhantes obtidas em estudos com ileofibularis em outras sete espécies de lagartos da família Tropiduridae. O resultado mostrou algumas variações entre os músculos de um mesmo indivíduo e entre os mesmos músculos em indivíduos diferentes
Resumo:
Due to motor difficulties, children with developmental coordination disorder (DCD) doesn't feel motivated to do physical activities, sometimes resulting in a decline of their physical fitness, but it isn't really known for sure the reasons that induct children with DCD to low performances in physical fitness tests, because a lot of tasks that are part of the battery of tests of physical performance are complex in the coordination and/or motor control point of view, like the vertical jump for example. Therefore, the objective of this study was to investigate the factors that induct children with DCD to low performances in physical fitness tests, especially in the vertical jump task. For that, cinematic (duration of the eccentrical phase, duration of the concentrical phase, shift of the mass center and velocity of the mass center), kinetic (potency peak and force peak) and vertical jump performance analysis in two conditions (with the use of arms and without it) were realized in a force platform. The results indicated that children with DCD show a lower performance compared to their peers with typical development (TD), due to a lower potency production
Resumo:
The present work aims to study the characteristics of the alloy Al - 7 % Si - 0 , 3Mg ( AA356 ) , more specifically characterize the macrostructure and microstructure and mechanical properties of the alloy ingots AA356 obtained in metal molds and sand molds for power studying the structures through the difference of cooling rates . This alloy is explained by the fact of referring league has excellent combination of properties such as low solidification shrinkage and good fluidity, good weldability , high wear resistance , high strength to weight ratio, has wide application in general engineering , and particularly in the automotive and aerospace engineering . In this work we will verify this difference in properties through two different cooling rates . We monitor the solid solidification temperatures by thermocouples building with them the cooling curve as a tool that will aid us to evaluate the effectiveness of the grain refining because it achieved with some important properties of the alloy as the latent heat of solidification fraction the liquid and solid temperatures, the total solidification time, and identify the presence of inoculants for grain refinement. Thermal analysis will be supported by the study of graphic software “Origin “will be achieved where the cooling curve and its first derivative that is the cooling rate. Made thermal analysis, analysis will be made in macrographs ingots obtained for observation of macrostructures obtained in both types of ingots and also analysis of micrographs where sampling will occur in strategic positions ingots to correlate with the microstructure. Finally will be collecting data from Brinell hardness of ingots and so then correlating the properties of their respective ingots with cooling rate. We found that obtained with cast metal ingots showed superior properties to the ingots obtained with sand mold