Preemption delay analysis for floating non-preemptive region scheduling

In real-time systems, there are two distinct trends for scheduling task sets on unicore systems: non-preemptive and preemptive scheduling. Non-preemptive scheduling is obviously not subject to any preemption delay but its schedulability may be quite poor, whereas fully preemptive scheduling is subject to preemption delay, but benefits from a higher flexibility in the scheduling decisions. The time-delay involved by task preemptions is a major source of pessimism in the analysis of the task Worst-Case Execution Time (WCET) in real-time systems. Preemptive scheduling policies including non-preemptive regions are a hybrid solution between non-preemptive and fully preemptive scheduling paradigms, which enables to conjugate both world's benefits. In this paper, we exploit the connection between the progression of a task in its operations, and the knowledge of the preemption delays as a function of its progression. The pessimism in the preemption delay estimation is then reduced in comparison to state of the art methods, due to the increase in information available in the analysis.

Radio link quality estimation in wireless sensor networks: a survey

Radio link quality estimation in Wireless Sensor Networks (WSNs) has a fundamental impact on the network performance and also affects the design of higher-layer protocols. Therefore, for about a decade, it has been attracting a vast array of research works. Reported works on link quality estimation are typically based on different assumptions, consider different scenarios, and provide radically different (and sometimes contradictory) results. This article provides a comprehensive survey on related literature, covering the characteristics of low-power links, the fundamental concepts of link quality estimation in WSNs, a taxonomy of existing link quality estimators, and their performance analysis. To the best of our knowledge, this is the first survey tackling in detail link quality estimation in WSNs. We believe our efforts will serve as a reference to orient researchers and system designers in this area.

Quality-of-service in wireless sensor networks: state-of-the-art and future directions

Wireless sensor networks (WSNs) are one of today’s most prominent instantiations of the ubiquituous computing paradigm. In order to achieve high levels of integration, WSNs need to be conceived considering requirements beyond the mere system’s functionality. While Quality-of-Service (QoS) is traditionally associated with bit/data rate, network throughput, message delay and bit/packet error rate, we believe that this concept is too strict, in the sense that these properties alone do not reflect the overall quality-ofservice provided to the user/application. Other non-functional properties such as scalability, security or energy sustainability must also be considered in the system design. This paper identifies the most important non-functional properties that affect the overall quality of the service provided to the users, outlining their relevance, state-of-the-art and future research directions.

The Gap Between Knowledge and Action: Obstacles, Restraints and Deficits During the Execution of Refurbishments

This article outlines the initial draft of a PhD project which investigates refurbishment or rehabilitation projects in two German cities. The study focuses on obstacles, restraints and deficits as well as factors of success, which can be identified during the execution of the refurbishments. Moreover the study examines the process of the refurbishment itself, the general conditions under which the refurbishments are being executed as well as the implementation of sustainability criteria. First the article gives a short summary of the theoretical considerations of the study. In this respect it shortly outlines the global conditions of urban development and conducting challenges for cities in the 21st century, guiding principles of a sustainable urban development as well as goals of sustainable refurbishments. Finally the article shortly describes the case studies and presents the initial results of the empirical work.

The sociological perspective on the knowledge-based society: assumptions, facts and visions

The paper will present the central discourse of the knowledge-based society. Already in the 1960s the debate of the industrial society already raised the question whether there can be considered a paradigm shift towards a knowledge-based society. Some prominent authors already foreseen ‘knowledge’ as the main indicator in order to displace ‘labour’ and ‘capital’ as the main driving forces of the capitalistic development. Today on the political level and also in many scientific disciplines the assumption that we are already living in a knowledge-based society seems obvious. Although we still do not have a theory of the knowledge-based society and there still exist a methodological gap about the empirical indicators, the vision of a knowledge-based society determines at least the perception of the Western societies. In a first step the author will pinpoint the assumptions about the knowledge-based society on three levels: on the societal, on the organisational and on the individual level. These assumptions are relied on the following topics: a) The role of the information and communication technologies; b) The dynamic development of globalisation as an ‘evolutionary’ process; c) The increasing importance of knowledge management within organisations; d) The changing role of the state within the economic processes. Not only the differentiation between the levels but also the revision of the assumptions of a knowledge-based society will show that the ‘topics raised in the debates’ cannot be considered as the results of a profound societal paradigm shift. However what seems very impressive is the normative and virtual shift towards a concept of modernity, which strongly focuses on the role of technology as a driving force as well as on the global economic markets, which has to be accepted. Therefore – according to the official debate - the successful adaptation of these processes seems the only way to meet the knowledge-based society. Analysing the societal changes on the three levels, the label ‘knowledge-based society’ can be seen critically. Therefore the main question of Theodor W. Adorno during the 16th Congress of Sociology in 1968 did not loose its actuality. Facing the societal changes he asked whether we are still living in the industrial society or already in a post-industrial state. Thinking about the knowledge-based society according to these two options, this exercise would enrich the whole debate in terms of social inequality, political, economic exclusion processes and at least the power relationship between social groups.

Change Processes and Future Perspectives in the Knowledge Society. The Example of Clothing and Textile Industry

The paper examines change processes und future perspectives in the knowledge society. It presents the clothing and textile industry as an example for a transforming industry in a global economy. The paper reviews existing future studies, which have surveyed change processes and future developments in the clothing and textile industry. Main goals of the review are the identification of changes in work and the description of the restructuring of global value chains within the clothing and textile sector. The paper also highlights major current trends, drivers of change and future prospects in this sector.

The First WORKS Conference on Transformation of Work in a Global Knowledge Economy

The relationship between the changes of the global economy and individual working conditions formed the background of the first WORKS conference “The transformation of work in a global knowledge economy: towards a conceptual framework”, held in Chania, Greece from 21st – 22nd September, 2006 and attended by around 50 European researchers. Experts from academia and trade unions from all over the world were invited to give insights into their field of research, contributing to one of the main topics of the conference: (i) globalisation and organisational restructuring, (ii) workers’ organisation, the quality of working life and the gender dimension and (iii) global experiences and recommendations.

Into a new phase of the research on restructuring of work in the knowledge society: the Third WORKS General Assembly in Sofia (Bulgaria)

The WORKS Project started two years ago (2005), involving the efforts of research institutes of 13 European countries with the main purpose of improving the understanding of the major changes in work in the knowledge-based society, taking account both of global forces and the regional diversity within Europe. This research meeting in Sofia (Bulgaria) aimed to present synthetically the massive amount of data collected in the case studies (occupational and organisational) and with the quantitative research during last year.

International Conference on “Foresight Studies on Work in the Knowledge Society“ in Monte de Caparica (FCT-UNL) on 19-20 October 2006

On 19 and 20 October 2006, the Research Centre on Enterprise and Work Organisation (IET) organised the first international conference on “Foresight Studies on Work in the Knowledge Society”. It took place at the auditorium of the new Library of FCT-UNL and had the support of the research project “CodeWork@VO” (financed by FCT-MCTES and co-ordinated by INESC, Porto). The conference related to the European research project “Work Organisation and Restructuring in the Knowledge Society” (WORKS), which is financed by the European Commission. The main objective of the conference was to analyse and discuss research findings on the trends of work structures in the knowledge society, and to debate on new work organisation models and new forms of work supported by ICT.

Ergonomics and Usability – key factors in Knowledge Society

During the recent years human society evolved from the “industrial society age” and transitioned into the “knowledge society age”. This means that knowledge media support migrated from “pen and paper” to computer-based Information Systems. Due to this fact Ergonomics has assumed an increasing importance, as a science/technology that deals with the problem of adapting the work to the man, namely in terms of Usability. This paper presents some relevant Ergonomics, Usability and User-centred design concepts regarding Information Systems.

Los usuarios ante los alimentos genéticamente modificados y su información en el etiquetado

OBJETIVO : Analizar la opinión que los usuarios tienen sobre alimentos genéticamente modificados y su información en el etiquetado. MÉTODOS : Realizada revisión sistemática de la literatura científica sobre los alimentos transgénicos y el etiquetado a partir de la consulta de las bases de datos bibliográficas: Medline (vía PubMed), EMBASE, ISI-Web of Knowledge, Cochrane Library Plus, FSTA, LILACS, CINAHL y AGRICOLA. Los descriptores seleccionados fueron: «organisms, genetically modified » y «food labeling». La búsqueda se realizó desde la primera fecha disponible hasta junio de 2012, seleccionando los artículos pertinentes escritos en inglés, portugués y castellano. RESULTADOS : Se seleccionaron 40 artículos. En todos ellos, se debía haber realizado una intervención poblacional enfocada al conocimiento de los consumidores sobre los alimentos genéticamente modificados y su necesidad, o no, de incluir información en el etiquetado. El consumidor expresa su preferencia por el producto no-genéticamente modificado, y apunta que está dispuesto a pagar algo más por él, pero, en definitiva compra el artículo que está a mejor precio en un mercado que acoge las nuevas tecnologías. En 18 artículos la población se mostraba favorable a su etiquetado obligatorio y seis al etiquetado voluntario; siete trabajos demostraban el poco conocimiento de la población sobre los transgénicos y, en tres, la población subestimó la cantidad que consumía. En todo caso, se observó la influencia del precio del producto genéticamente modificado. CONCLUSIONES : La etiqueta debe ser homogénea y aclarar el grado de tolerancia en humanos de alimentos genéticamente modificados en comparación con los no modificados. Asimismo, debe dejar claro su composición, o no, de alimento genéticamente modificado y la forma de producción de estos artículos de consumo. La etiqueta también debe ir acompañada de un sello de certificación de una agencia del estado y datos para contacto. El consumidor expresa su preferencia por el producto no-genéticamente modificado pero señaló que acaba comprando el artículo que está a mejor precio en un mercado que acoge las nuevas tecnologías.

HIV/AIDS knowledge among men who have sex with men: applying the item response theory

OBJECTIVE To evaluate the level of HIV/AIDS knowledge among men who have sex with men in Brazil using the latent trait model estimated by Item Response Theory. METHODS Multicenter, cross-sectional study, carried out in ten Brazilian cities between 2008 and 2009. Adult men who have sex with men were recruited (n = 3,746) through Respondent Driven Sampling. HIV/AIDS knowledge was ascertained through ten statements by face-to-face interview and latent scores were obtained through two-parameter logistic modeling (difficulty and discrimination) using Item Response Theory. Differential item functioning was used to examine each item characteristic curve by age and schooling. RESULTS Overall, the HIV/AIDS knowledge scores using Item Response Theory did not exceed 6.0 (scale 0-10), with mean and median values of 5.0 (SD = 0.9) and 5.3, respectively, with 40.7% of the sample with knowledge levels below the average. Some beliefs still exist in this population regarding the transmission of the virus by insect bites, by using public restrooms, and by sharing utensils during meals. With regard to the difficulty and discrimination parameters, eight items were located below the mean of the scale and were considered very easy, and four items presented very low discrimination parameter (< 0.34). The absence of difficult items contributed to the inaccuracy of the measurement of knowledge among those with median level and above. CONCLUSIONS Item Response Theory analysis, which focuses on the individual properties of each item, allows measures to be obtained that do not vary or depend on the questionnaire, which provides better ascertainment and accuracy of knowledge scores. Valid and reliable scales are essential for monitoring HIV/AIDS knowledge among the men who have sex with men population over time and in different geographic regions, and this psychometric model brings this advantage.

Body image in Brazil: recent advances in the state of knowledge and methodological issues

OBJECTIVE To analyze Brazilian literature on body image and the theoretical and methodological advances that have been made. METHODS A detailed review was undertaken of the Brazilian literature on body image, selecting published articles, dissertations and theses from the SciELO, SCOPUS, LILACS and PubMed databases and the CAPES thesis database. Google Scholar was also used. There was no start date for the search, which used the following search terms: “body image” AND “Brazil” AND “scale(s)”; “body image” AND “Brazil” AND “questionnaire(s)”; “body image” AND “Brazil” AND “instrument(s)”; “body image” limited to Brazil and “body image”. RESULTS The majority of measures available were intended to be used in college students, with half of them evaluating satisfaction/dissatisfaction with the body. Females and adolescents of both sexes were the most studied population. There has been a significant increase in the number of available instruments. Nevertheless, numerous published studies have used non-validated instruments, with much confusion in the use of the appropriate terms (e.g., perception, dissatisfaction, distortion). CONCLUSIONS Much more is needed to understand body image within the Brazilian population, especially in terms of evaluating different age groups and diversifying the components/dimensions assessed. However, interest in this theme is increasing, and important steps have been taken in a short space of time.

On the development of a test-bed application for the ART-WiSe architecture

The ART-WiSe (Architecture for Real-Time communications in Wireless Sensor Networks) framework aims at the design of new communication architectures and mechanisms for time-sensitive Wireless Sensor Networks (WSNs). We adopted a two-tiered architecture where an overlay Wireless Local Area Network (Tier 2) serves as a backbone for a WSN (Tier 1), relying on existing standard communication protocols and commercial-off-the-shell (COTS) technologies – IEEE 802.15.4/ZigBee for Tier 1 and IEEE 802.11 for Tier 2. In this line, a test-bed application is being developed for assessing, validating and demonstrating the ART-WiSe architecture. A pursuit-evasion application was chosen since it fulfils a number of requirements, namely it is feasible and appealing and imposes some stress to the architecture in terms of timeliness. To develop the testbed based on the previously referred technologies, an implementation of the IEEE 8021.5.4/ZigBee protocols is being carried out, since there is no open source available to the community. This paper highlights some relevant aspects of the ART-WiSe architecture, provides some intuition on the protocol stack implementation and presents a general view over the envisaged test-bed application.

On a test-bed application for the ART-WiSe framework

This report describes the development of a Test-bed Application for the ART-WiSe Framework with the aim of providing a means of access, validate and demonstrate that architecture. The chosen application is a kind of pursuit-evasion game where a remote controlled robot, navigating through an area covered by wireless sensor network (WSN), is detected and continuously tracked by the WSN. Then a centralized control station takes the appropriate actions for a pursuit robot to chase and “capture” the intruder one. This kind of application imposes stringent timing requirements to the underlying communication infrastructure. It also involves interesting research problems in WSNs like tracking, localization, cooperation between nodes, energy concerns and mobility. Additionally, it can be easily ported into a real-world application. Surveillance or search and rescue operations are two examples where this kind of functionality can be applied. This is still a first approach on the test-bed application and this development effort will be continuously pushed forward until all the envisaged objectives for the Art-WiSe architecture become accomplished.