An alkaline direct borohydride fuel cell with hydrogen peroxide as oxidant

A novel alkaline direct borohydride fuel cell (ADBFC) using varying concentrations of hydrogen peroxide as oxidant and sodium borohydride with sodium hydroxide, each of differing concentration, as fuel is reported. A peak power density of ca. 150 in W cm(-2) at a cell voltage of 540 mV can be achieved from the optimized ADBFC operating at 70 degrees C. (c) 2004 Elsevier B.V. All rights reserved.

Effect of fuel on the formation structure, transport and magnetic properties of LaMnO3+nanopowders

Single-step low-temperature solution combustion (LCS) synthesis was adopted for the preparation of LaMnO3+ (LM) nanopowders. The powders were well characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS),surface area and Fourier transform infrared spectroscopy (FTIR). The PXRD of as-formed LM showed a cubic phase but, upon calcination (900degrees C, 6 h), it transformed into a rhombohedral phase. The effect of fuel on the formation of LM was examined, and its structure and magnetoresistance properties were investigated. Magnetoresistance (MR) measurements on LM were carried out at 0, 1, 4 and 7 T between 300 and 10 K. LM (fuel-to-oxidizer ratio; = 1) showed an MR of 17% at 1 T, whereas, for 4 and 7 T, it exhibited an MR of 45 and 55%, respectively, near the TM-I. Metallic resistivity data below TM-I showed that the double exchange interaction played a major role in this compound. It was interesting to observe that the sample calcined at 1200 degrees C for 3 h exhibited insulator behavior.

E-learning in a rural context: Alternative media and contemporary applications

This report has been written as part of the E-ruralnet –project that addresses e-learning as a means for enhancing lifelong learning opportunities in rural areas, with emphasis on SMEs, micro-enterprises, self-employed and persons seeking employment. E-ruralnet is a European network project part-funded by the European Commission in the context of the Lifelong Learning Programme, Transversal projects-ICT. This report aims to address two issues identified as requiring attention in the previous Observatory study: firstly, access to e-learning for rural areas that have not adequate ICT infrastructure; and secondly new learning approaches introduced through new interactive ICT tools such as web 2.0., wikis, podcasts etc. The possibility of using alternative technology in addition to computers is examined (mobile telephones, DVDs) as well as new approaches to learning (simulation, serious games). The first part of the report examines existing literature on e-learning and what e-learning is all about. Institutional users, learners and instructors/teachers are all looked at separately. We then turn to the implementation of e-learning from the organizational point of view and focus on quality issues related to e-learning. The report includes a separate chapter or e-learning from the rural perspective since most of Europe is geographically speaking rural and the population in those areas is that which could most benefit from the possibilities introduced by the e-learning development. The section titled “Alternative media”, in accordance with the project terminology, looks at standalone technology that is of particular use to rural areas without proper internet connection. It also evaluates the use of new tools and media in e-learning and takes a look at m-learning. Finally, the use of games, serious games and simulations in learning is considered. Practical examples and cases are displayed in a box to facilitate pleasant reading.

Thermal ignition studies on metallized fuel-oxidizer systems

The thermal ignition behaviour of various mixtures of organic fuels, magnesium and ammonium nitrate (AN) has been examined by differential thermal analysis technique. It has been observed that the thermal decomposition/ignition of organic fuel-AN mixtures is modified significantly in the presence of magnesium metal. The decomposition characteristics of the binary mixtures of AN with various metals indicate the specific action of magnesium and zinc in lowering the decomposition temperature. A possible explanation for the low temperature decomposition is given in terms of the solid state reaction causing the fusion of AN which further reacts with the metal resulting in a highly exothermic reaction.

Electro-Oxidation of Borohydride on Rhodium, Iridium, and Rhodium-Iridium Bimetallic Nanoparticles with Implications to Direct Borohydride Fuel Cells

Electrochemical oxidation of borohydride is studied on nanosized rhodium, iridium, and bimetallic rhodium-iridium catalysts supported onto Vulcan XC72R carbon. The catalysts are characterized by X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy in conjunction with cyclic voltammetry and polarization studies. The studies reveal that a 20 wt % bimetallic Rh-Ir catalyst supported onto carbon (Rh-Ir/C) is quite effective for the oxidation of borohydride. Direct borohydride fuel cell with Rh-Ir/C as the anode catalyst and Pt/C as the cathode catalyst exhibits a peak power density of 270 mW/cm(2) at a load current density of 290 mA/cm(2) as against 200 mW/cm(2) at 225 mA/cm(2) for Rh/C and 140 mW/cm(2) at 165 mA/cm(2) for Ir/C while operating at 80 degrees C. The synergistic catalytic activity for the bimetallic Rh-Ir nanoparticles toward borohydride oxidation is corroborated by density-functional theory calculations using electron-localization function. (C) 2010 The Electrochemical Society. [DOI:10.1149/1.3442372] All rights reserved.

Low Temperature Synthesis of Nano-Crystalline CaCu3Ti4O12 Through aFuel Mediated Auto-Combustion Pathway

A novel, cost effective,environment-friendly and energetically beneficial alternative method for the synthesis of giant dielectric pseudo-perovskite material CaCu3Ti4O12 (CCTO) is presented. The method involved auto-combustion of an aqueous precursor solution in oxygen atmosphere with the help of external fuels and is capable of producing high amount of CCTO at ultra-low temperature, in the combustion residue itself. The amount of phase generated was observed to be highly dependent on the combustion process i.e. on the nature and amount of external-fuels added for combustion. Two successful fuel combinations capable of producing reasonably higher amount of the desired compound were investigated. On a structural characterization grain size was observed to decrease drastically to nano-dimension compared to submicron-size that was obtained in a traditional sol-gel combustion and subsequent cacination method. Therefore, the method reported can produce nano-crystalline CaCu3Ti4O12 ceramic matrix at an ultra-low temperature and is expected to be applicable for other multifunctional perovskite oxide materials.

Fractional-factorial design of a porous-carbon fuel-cell electrode

The use of fractional-factorial methods in the optimization of porous-carbon electrode structure is discussed with respect to weight-loss of carbon during gas treatment, weight and mixing time of binder, compaction temperature, time and pressure, and pressure of feed gas. The experimental optimization of an air electrode in alkaline solution is described.

Some implications of an alternative structure for DNA

We have constructed a space-filling (Corey-Pauling-Koltun) model of an alternative structure for DNA. This structure is not a double helix, but consists of a pair of polynucleotide strands lying side by side and held together by Watson-Crick base pairing. Each of the two strands has alternating right- and left-handed helical segments approximately five base pairs in length. Sugar residues in alternating segments along a strand point in opposite directions. A structure slightly different from the present one proposed earlier by ourselves and another group and in which sugars in a strand all point in the same direction is ruled out. The present structure yields natural solutions to the problems of supercoiling of DNA and of strand separation during DNA replication. This model is energetically more favorable than the double helix.

Two-dimensional NMR spectroscopy of connected transitions by linear combination of flip angle dependent cosy: An alternative scheme for E.COSY

An alternative pulse scheme which simplifies and improves the recently proposed P.E.COSY experiment is suggested for the retention of connected or unconnected transitions in a coupled spin system. An important feature of the proposed pulse scheme is the improved phase characteristics of the diagonal peaks. A comparison of various experiments designed for this purpose, namely COSY-45, E.COSY, P.E.COSY and the present scheme (A.E.COSY), is also presented. The suppression of unconnected transitions and the measurement of scalar coupling constants and their relative signs are illustrated from A.E.COSY spectra of 2,3-dibromopropionic acid and 2-(2-thienyl)pyridine.

Alternative News Sources as 'Collaboratory' Journalism. A case study of Helsingin Sanomat and its relation with the Youth Voice Editorial Board

The new paradigm of connectedness and empowerment brought by the interactivity feature of the Web 2.0 has been challenging the traditional centralized performance of mainstream media. The corporation has been able to survive the strong winds by transforming itself into a global multimedia business network embedded in the network society. By establishing networks, e.g. networks of production and distribution, the global multimedia business network has been able to sight potential solutions by opening the doors to innovation in a decentralized and flexible manner. Under this emerging context of re-organization, traditional practices like sourcing need to be re- explained and that is precisely what this thesis attempts to tackle. Based on ICT and on the network society, the study seeks to explain within the Finnish context the particular case of Helsingin Sanomat (HS) and its relations with the youth news agency, Youth Voice Editorial Board (NÄT). In that sense, the study can be regarded as an explanatory embedded single case study, where HS is the principal unit of analysis and NÄT its embedded unit of analysis. The thesis was able to reach explanations through interrelated steps. First, it determined the role of ICT in HS’s sourcing practices. Then it mapped an overview of the HS’s sourcing relations and provided a context in which NÄT was located. And finally, it established conceptualized institutional relational data between HS and NÄT for their posterior measurement through social network analysis. The data set was collected via qualitative interviews addressed to online and offline editors of HS as well as interviews addressed to NÄT’s personnel. The study concluded that ICT’s interactivity and User Generated Content (UGC) are not sourcing tools as such but mechanism used by HS for getting ideas that could turn into potential news stories. However, when it comes to visual communication, some exemptions were found. The lack of official sources amidst the immediacy leads HS to rely on ICT’s interaction and UGC. More than meets the eye, ICT’s input into the sourcing practice may be more noticeable if the interaction and UGC is well organized and coordinated into proper and innovative networks of alternative content collaboration. Currently, HS performs this sourcing practice via two projects that differ, precisely, by the mode they are coordinated. The first project found, Omakaupunki, is coordinated internally by Sanoma Group’s owned media houses HS, Vartti and Metro. The second project found is coordinated externally. The external alternative sourcing network, as it was labeled, consists of three actors, namely HS, NÄT (professionals in charge) and the youth. This network is a balanced and complete triad in which the actors connect themselves in relations of feedback, recognition, creativity and filtering. However, as innovation is approached very reluctantly, this content collaboration is a laboratory of experiments; a ‘COLLABORATORY’.

Catalytic hydrogen combustion for treatment of combustible gases from fuel cell processors

Catalytic combustion of H-2 was carried out over combustion synthesized noble metal (Pd or Pt) ion-substituted CeO2 based catalysts using a feed stream that simulated exhaust gases from a fuel cell processor The catalysts showed a high activity for H-2-combustion and complete conversion was achieved below 200 C over all the catalysts when O-2 was used in a stoichiometric amount With higher amounts of O-2 the reaction rates Increased and complete conversions were possible below 100 C The reaction was also carried out over Pd-impregnated CeO2 The conversions of H-2 with stoichiometric amount of O-2 were found to be higher over Pd-substituted compound The mechanism of the reaction over noble metal-substituted compounds was proposed on the basis of X-ray photoelectron spectroscopy studies The redox couples between Ce and metal ions were established and a dual site redox mechanism was pi posed for the reaction (C) 2010 Elsevier B V All rights reserved